Firmware Update for HP P1102w on MAC

Hi.
Intro information:
I'm running OSX 10.8.5 and I be hable to do my printer work downloading software for OSX 10.7. Now the printer is working with USB connection and Wireless connection, but I can't eneble the e-print center. The printer can't connect to the eprint service by internet.
The question is:
I can't update HP P 1102w firmware on Mac. I have the 20130213 Firmware and the website shows me that the updated firmware is the 20130703.
I downloaded the LJP1100_P1560_P1600_FW_Update.dmg but my mac blocked the firmware setup.
Can anyone help me please?
Thanks.
Claudio

Hi c_pia,
I understand you can't enable the eprint services.
If you can access the printer's embedded web server and you have the tab for HP Web Services then the firmware should be alright that is already on the printer.
Print a configuration page. Method two: Print a Configuration page from the printer control panel.
Access the printer's embedded web server.
Go to the networking tab, select IPV4 on the left side.
Select manual.
Fill in the information from the configuration report.
Type in the alternate dsn is 8.8.8.8 and the alternate dsn is 8.8.4.4.
Apply changes.
Now reload the web page and try to enable the web services.
I believe that this will provide a resolution to your issue.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HT1237 Where can I get firmware updates for a Mid 2007 Mac mini (Macmini2,1)?

The model for some reason is taken off of the firmware update support page. I found an archive of the page from 2011 and there seems to have been an update. My current SMC Version is 1.19f2 and the update was 1.3f4 but the strange thing is that when I follow the link to download it forwards me to the late 2009 model page. Any help would be appreciated. I'd look across the internet but I'm not comfortable download firmware upgrades from a 3rd party site.
Much thanks
Edit: I found that the mid 2007, late 2006 and early 2006 use the same SMC firmware and realized that both the link from the archived page and the link for the late 2006 model on apple's page all linked to the early 2006 firmware update. I'm going to try it. If you want me to update with results reply, otherwise consider this dead...

Good moves methinks, & it is strange how they list it, here's my 2007 iMac...
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Here's my 2005 G5...
Boot ROM Version: 5.2.7f1
So it appears it probably is nineteen!

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

How do i install firmware updates for time capsule?

How do I install firmware updates for time capsule?

If you are using the Lion or Mountain Lion operating system on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
A message will be displayed if there are any available updates. Click to update if that is the case.
If you are using the Leopard or Snow Leopard operating system......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, the click Manual Setup
Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

How to run a firmware update for buffalo tech NAS

I downloaded a firmware updater for a Mac to run the install of a firmware update to a Buffalo Tech NAS LinkStation. Mavericks tells me it can't run this because it is from an unidentifed developer. Nice.. I need a workaround if that is possible.

Here you go:
http://support.apple.com/kb/PH14369

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E?

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E? I'm trying to burn a DVD using iDVD on my iBook. The blank DVD's are Memorex 16x (I've used Memorex 8x successfully in the past), the DVD drive is specified above. The finder tells me that the drive has reported an error "sense key=medium error/ sense code=0x73, 0x03" I couldn't find firmware updates in either Panasonic Matshita or Apple websites. Am I forever confined to 8x DVD-R's with this laptop?
ibook G4 Mac OS X (10.4.7)
ibook G4 Mac OS X (10.4.7)

First, welcome to the discussions.
Sorry, No Firmware update to allow you to burn at 16X.
The drive you have is only capable of burning at 8X.
You will also find that for the most part when you recieve errors that it is more often than not attributed to MEDIA.
There are so many problems with the cheaper media they are to numerous to cover.
DVD is not at all like CD burning, in that the technology as well as the Optical Drives used, seem to be touchy, and require the use of good Media. This will allow you trouble free burning without errors.
http://www.digitalfaq.com/media/dvdmedia.htm
You will also find that the reason that DVD-R Media works the best, is because it is the most wirely used and recognised in both Computers and Players.
If I may suggest. There are several 16X DVD's on the market.
Take your time and look at the back of the Jewel Cases and read. You will see that the better Media will tell you that it will burn at 1X through and including 16X, if your drive is capable of handleing these speeds. I prefer Maxell 16X DVD-R Media in the individual Jewel Cases. This Media burns at the slower speeds on the older Superdrives that will only burn at 1X or 2X.
Like many others I have learned my lessons the hard way.
Cheers Don

Is there a firmware update for ipf5100 and OS 10.10?

I have just restarted my ipf5100 after a long downtime. Current firmware version is 1.43. I see canon has a firmware update for Mac OS10.8 and 10.9. Will that work for 10.10, or is there another upate for 10.10?

don't think there is an update for the firmware as of now.

Firmware Update for WAG200G to fix Security Hole

Hello,
I use a Linksys WAG200G with firmware version 1.01.09, and recently became aware that this particular model has a publicly known exploitable backdoor (See: http://www.businessinsider.com/cisco-warns-about-security-hole-2014-1 for more info).
Has this security hole been fixed? If yes, where can I download an update for it?
Thanks for your time,
Sam

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Sonnet firmware update for OS X

Here's instructions I received from Sonnet on how to do the Sonnet firmware update for OS X (you don't need to boot in OS 9.2). Worked for me. Installed Sonnet Encore/ST 1.8Ghz on a G4 350 AGP system.
Note: you still need to have 4.2.8f1 firmware prior to the patch.
+Sonnet doesn't actually provide instructions on how to use the OS X software. Follow the directions below and I imagine you'll not have any problems.+
+MAC OS X USERS—Install Sonnet Firmware Patch+
+This section describes the installation of software required to support the Encore ZIF, Encore ST or ST Duet G4 in your computer. Please note you MUST run the Sonnet Firmware Updater before you install this upgrade card. If you do not run the updater, your computer will not operate with the processor upgrade installed.+
+1. Insert the Sonnet Installer CD into the CD-ROM drive. Double-click the Sonnet Install CD icon. When the Sonnet Install CD window appears, double-click the Mac OS X ONLY folder.+
+2. Double-click the Sonnet Firmware Updater icon; Mac OS X’s built-in Install program will launch. Follow the onscreen directions to complete the installation of the Sonnet Firmware Updater and Sonnet Firmware Remover applications to your Applications folder.+
+3. Shut down your computer.+
+4. Press and hold the programmer's button until you hear a long tone; release the button when you hear the tone. Note: programmer's button is the little tiny pinhole on the front of a Quicksilver.+
+4a. For QuickSilver 2002: While holding the programmer's button, press and hold the 'start-up' button on the front of the Mac. When the Mac starts up, release the start-up button. Continue to hold the programmer's button and when you hear a long tone, release it.+
+5. Once the startup process is complete and you have logged in (if necessary), go the Finder and select Go > Applications from the Apple menu.+
+6. Locate Sonnet Firmware Updater, and then double-click its icon to launch the application.+
+7. When the Sonnet Firmware Updater window appears, click OK.+
+8. When the Authenticate window appears, enter the Administrator password, and then click OK.+
+9. When the Wait message appears, DO NOT CLICK OK; just wait. Clicking the OK button will cause the application to quit. After the Wait message disappears, another message will appear indicating that the ROM is being patched. Do not turn the power off; this process may take several minutes.+
+10. When the message stating that the ROM has been patched appears, click OK. Shut down your computer; you may now install the Encore ZIF, Encore ST or ST Duet processor upgrade card.+
+Support Note: After updating your system’s firmware with the Sonnet firmware installer, you do not need to install the other software located in the Mac OS X ONLY folder on the Sonnet Installer CD; that software is used for other processor upgrade cards by Sonnet.+

Coming in late on this discussion, but I just discovered this post in a search for an answer to my problem getting a Sonnet Encore ST 1 GHz processor to work in my G4. No disk came with my processor, however I have downloaded the firmware patch and cache enabler from Sonnet's website.
The problem is the processor installs and after a cuda reset will boot. However after some time the computer shuts dow and on restart all I get is a blank screen. Light comes on front of the G4 and fans as if it is searching for a boot disk, but the screen is blank- no signal from the computer. Replaced the original processor and it boots normally.
I don't think the patch ever installed properly. Any thoughts on this will be greatly appreciated.

Firmware update for Superdrive G4 Mini

The latest firmware update for "some" superdrives had me hoping that the nagging problem would be fixed, alas, no luck.
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Now I know for a fact that this drive does support burning -DL DVDs, except it has been crippled by Apple. Thank you.
What are the odds this would ever be rectified?

Hello,
What are the odds this would ever be rectified?
Not likely.
The Mac Mini G4 is now a discontinued product.
Apple will generally only go backwards to fix problems. They don't usually go back to add features to machines that have been discontinued and replaced with a new model.
So, if there was an update necessary to restore operation of the drive, then they would probably release one.
But, if there was a way to enable the drive to burn media it doesn't currently burn, then they are not going to do it now.
They are more interested in selling you a new system with the features you want, than enabling the features you want on a product you already own.
But, that's just the way things are done.
I hope this helps.

Graphics Firmware update for iMac with with NVIDIA GeForce 7300 or 7600 GT

I am one of the many with an 06 24" iMac that has the graphics card glitch. Downloaded and installed this firmware update today and worked all day with no issues. The update says it is for users that are running Windows 7 in boot camp.
Is this coincidental and the firmware fixed the issue so many of us have with these iMacs with the NVIDIA cards or did I just jinx myself and my problems are bound to return?
Guess I will know soon enough!
http://support.apple.com/kb/DL978

I've seen all sorts graphics problems mentioned. Apple sells millions of Macs per years, so any potential problem is bound to happen to at least a few customers. Assuming that people can read your mind is not a very good way to get responses.
On the other hand, if you describe the problem in detail, people reading the forum and looking for solutions may actually find your post through a keywords search, and your finding about installing the firmware update for Windows 7 may help then too, after confirming their problem is similar to your problem.
But that's up to you...

IM27-inch imac Firmware update for OS X Lion won't install

Apple just released "iMac Graphic FW Update 3.0," and lists OS X 10.7 as a system requirement.
I downloaded it and attempted to install on my one-month-old 27-inch iMac (2.7 gHz Core i5). I'm running 10.7.1
Unfortunately, I get a message that "This software is not supported on your system."
Any clues as to what the issue may be? Am I missing something simple?
(All other programs were closed.)
Thanks for any tips/advice!
"My first Mac was a IIci 8/80"

Dave,
You are correct. If Software update says it's not needed then it's not needed on the OP's configuration. I was able to find this article however it's not conclusive about which GPU's are affected, it only says Radeon but doesn't nail down specifics.
Graphic firmware updates for iMac

IMac PowerPC G3 Firmware Update for Tiger Install

I have an iMac PowerPC G3 that was purchased with a slot DVD and Mac OS 9 installed. I upgraded to Mac OS X 10.2.8 with one problem, ie., can't use the copy and scan functions on my Epson Stylus CX5200 All-In-One Printer. I learned, recently, those functions only work with Mac OS.9. Additionally, I purchased the Tiger operating system and upon installing, I learned I need a firmware update which can only be installed in Mac OS 9. Do I really need to reinstall Mac OS 9 to install the firmware update for installing the Tiger operating system and to use the Epson copy and scan functions?
Any assistance will be appreciated.
SusanRup

i don't really know susan. it seems odd to me to have to have os 9, and that it couldn't be done in the later operating system. sorry, but i thought you were thinking you would have to erase the os x, install os 9, do the firmware update, and then install os x again:) what i would do i guess is contact epson. they should know exactly what you have do.|:)]

I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?

I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?
I didn't see this update come up in "Software Update"
If I was not meant to install this update, would it cause ANY damage at all to my mac ( this is my second as I dropped the first )
If I were to re-install ML would this fix any errors that this may have caused ?
The bottom of the page I link to says:
Boot ROM or SMC Version Information: MM51.0077.10
But when I click on "About this Mac" it says:
Boot ROM Version: MM51.0077.B10
SMC Version (system): 1.75f0
What does the additional "B" mean?
My mac mini is the Mid 2011 Model.
I am sorry if I am sounding super paranoid about this, but I don't want to have caused any permanent damage.

Hello,
It's somewhere between almost impossible & impossible to install the wrong EFI Update with all the checks it does!
Mac mini (Mid 2011) with Intel graphics
Macmini5,1
MM51.0077.B10 (EFI 1.6)
Mac mini (Mid 2011) with Radeon graphics
Macmini5,2
MM51.0077.B10 (EFI 1.6)
Mac mini Server (Mid 2011)
Macmini5,3
MM51.0077.B10 (EFI 1.6)
http://support.apple.com/kb/HT1237
Not sure what the B means.
If I were to re-install ML would this fix any errors that this may have caused ?
No, Firmware is unaffected by any OS change or re-install.

Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

Hello Apple Support Communities,
I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
Here are the specs that the page requested me to find:
Model Identifier:          iMac10,1
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.52f9
Someone please help, this has been bugging me for a while.

I took all the precautions and asked all the questions,
Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
http://www.hddfancontrol.com/
BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

Firmware Update for HP P1102w on MAC

Similar Messages

Maybe you are looking for