Firmware update for the harddisk

I ve got a warning that i must checked my harddisk firmware, so i do that, and indeed i must update the firmware for my TS 600-1040
After downloading i must do the steps, but then the program will make a cd-r but freeze, so what must i do now to update the firmware of my hard disk??
regards Toine (Netherlands)

Not sure exactly which firmware you are talking about, but I do see that SP46206 applies to that model. Note that multiple hard drives can be installed in that model, but if you received the notice from HP Update or HP Advisor, odds are good you have the model.
If you have the correct drive for the update, it should offer to allow you to make the disk later. If so - it should drop an ".iso" copy of the CD image to the desktop, with instructions for various CD burning apps.
If for some reason it doesn't - there's a manual way to get the .ISO.
Start running the update. Click Next to get past the opening screen, accept the terms of the license agreement. Just before you click OK to continue, open Windows Explorer (not Internet Explorer).
In the address field type in %temp%
It should show your temporary file folder. There should be a bunch of temporary files/folders ther. Look for a file in a subfolder (usually starts with the letters pft) with the extension of .ISO.
Copy that file somewhere where you can find it - like your desktop.
Exit out of the update.
Launch a CD burning application, such as Cyberlink DVD Suite, Roxio, etc - and choose to "burn image to disk". Then you should be able to load the update.
Hope this helps. If the update doesn't apply to your system, it should refuse to load.
-dm (a long-time HP employee, but the comments/suggestions here are my own, not my employer's)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

Similar Messages

Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

I have a few of these RAID cards in a couple servers, and then I have an earlier version of the RAID card in a few different servers.
The earlier servers are running non-apple 1.5 TB drives. It will be interesting to learn if this firmware update will indeed allow me to boost the capacity by installing non-apple drives, as the firmware previously has not.
Ohh I'm excited to update and try! This will greatly help out if it does!

Does the new 7.1.1 Itunes update have a firmware update for the 3G?

Hello, I downloaded the new i-tunes update, does it have a firmware update for the I-phone 3G? and if so can anyone tell what it is? and what bugs it fix's? Thanks....

Release notes state only “iTunes 7.7.1 includes fixes to improve the stability and performance.
no firmware update for iphone

I'm trying to download the firmware update for the WRT54G...

I'm trying to download the firmware update for the WRT54G version 6 router but I receive the error message that Internet Explorer is not able to open the internet site. It suggests that it is unavailable or cannot be found. I've tried accessing it numerous times with the same error. Any thoughts on this?

are you online through the router ?? if not , connect the computer directly to the modem and go to www.linksys.com/download to download the latest firmware for the router ..

Software and firmware updates for the Zen Vision M 30 gb.

On the Creative support homepage I can find the software and firmware updates for the Zen Vision M 60 gb, however, there is nothing listed for the 30 gb unit. Where can I find the software and firmware updates (downloads) for the 30 gb unit's

http://support.creative.com/Products...me=MP3+Players

Lack of firmware updates for the N95 8GB

Does anyone know what the latest firmware is for the N95 8GB? I've unlocked my phone from Vodafone but the updater still says the latest version is 20.0.016 but there are numerous posts talking about version 30?

As stated in his first post he has unlocked his phone. Also there is no point even phoning Vodafone. I spent around 2 months speaking to them trying to get an update for my N96 which never came. I was then also told they were under no obligation to do it either. Only option for me was to get the vodafone branding removed, so glad I did as he phone is much quicker now.

My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

When will the firmware update for the Note 4 be released to support the Gear VR?

I will need to look at purchasing on another device on another carrier depending on timing. (Cross checking the Oculus and Samsung dev boards as well)

Mihos wrote:
Note 4 update just showed up for my phone a few minutes ago. Installing now. They really need to communicate these things with the support agents so they can communicate better with us. We need information to make decisions. I can say right away, a Verizon device will never be my lead platform for development for this reason alone. Especially when the script for response leads to a link to a page that has nothing to do with phones, much less firmware update information. This is, in fact, the NJ5 update, so it should work, I will verify for the support techs and the community when I get back to the lab. (I eat lunch sometimes, contrary to popular belief.) Thanks for whoever prioritized this internally.
Apparently it was JUST released. http://www.droid-life.com/2014/12/10/verizon-galaxy-note-4-update-vru1anj5/

Will there be a firmware update for the lumia 920'...

Early reviews of the lumia 920 are all saying that the camera is not as Nokia said (the best camera on a smartphone at the moment). Photos taken in daylight are not that sharp compare to other devices. One of them even said that prototype tested a month before did not have such issue. Is that only a software problem? If yes, will there be an update? Thanks for the reply.

Some reviwers have rated the camera quite highly so it might be a case of user error on the reviewers part for marking it down.
http://allaboutwindowsphone.com/features/item/16087_PureView_shootout_Nokia_808_vs.php
Ray.

Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

Hello Apple Support Communities,
I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
Here are the specs that the page requested me to find:
Model Identifier:          iMac10,1
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.52f9
Someone please help, this has been bugging me for a while.

I took all the precautions and asked all the questions,
Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
http://www.hddfancontrol.com/
BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

WHY DOESNT NOKIE POST MORE FIRMWARE UPDATES FOR OT...

I AM NEW TO THIS BOARD AND HAVE FOUND THAT NO MATTER WHAT I DO TO UPDATE MY NOKIA 6230i (FIRMWARE AND RADIO SOFTWARE)I MEET A BRICK WALL.
IT SEEMS NOKIA ARENT INTERESTED IN GIVING YOU SUPPORT ONCE YOURE PHONE IS ANY MORE THAN A YEAR OLD.
THIS TO ME IS VERY UNFAIR AS I HAVE SPENT A LOT OF CASH ON THIS PHONE TRYING TO UPDATE VISUAL RADIO USING THE DIRECTIONS PROVIDED WITH NO SUCCESS AS THESE DIRECTIONS DO NOT WORK AS I CANT FIND ANYWHERE TO DOWNLOAD THE THE NEW VISUAL RADIO WHILEST ON WAP.
THIS TO DATE HAS COST ME £75 TRYING TO FIND THE LINK.
ALSO I HAVE BEEN ASKING FOR THE FIRMWARE UPDATE FOR THE 6230i AS I SEE THIS AS BEING FAIR AS EVERY OTHER MOBILE THAT IS BEING POSTED CAN BE UPDATED OVER THE AIR AND THROUGH SOFTWARE UPDATE.
WHY CANT MINE AND MANY OTHERS.
EVEN IF NOKIA POSTED THE LAST RELEASED FOR EVERY MOBILE EVEN FOR THE OLD ONES I WOULD BE VERY GREATFUL .
MY NOKIA HAS A VERY OLD FIRMWARE V3.40 THIS NOKIA KNOWS IS FULL OF BUGS AND SHOULD BE HELD ACCOUNTABLE FOR POSTING THE FIXES UNTILL THERE ARE NO BUGS TO SORT WITHOUT EXCESS COST OR HAVING TO VISIT A RECOMMENDED REPAIR DEALER.
I WANT IT FREE JUST LIKE THE NEXT GUY SO NOKIA POST THE FIRMWARES AS SOON AS POSSIBLE AS I AM COMPLETELY FED UP WITH THIS FONE AND ITS BUGS.
YOURS SINCERELY
AN UNHAPPY CUSTOMER

First of all, please locate the Caps Lock key of your keyboard; all upper case text is hard to read, and traditionally considered as shouting. Of course, you may already know that, and intended to shout.
Anyway, most phones do not have the built-in support for do-it-yourself firmware updates.
For such phones your options are (if you think you need a firmware update):
- Take/send the phone to an authorized Nokia service/repair center, where the update can be done.
- Buy relativelt expensive flashing equipment and locate illegally distributed firmware files and try it on your own with that.
My advise is to go for the former rather than the latter option. The former should cost you anything (at least not for as long as the phone is under warranty & excluding what it takes for you to go there).
As to downloading "THE NEW VISUAL RADIO WHILEST ON WAP", I don't know what you mean by that. I don't know a 6230i, but either it comes with Visual Radio built-in or not. Any updates/fixes to it would come with a firmware update, but not over WAP.
Note also that you don't need the Visual Radio service to listen to FM radio channels, and most radion stations do not support the "Visual" bit at all (if they do, the support is indicated in the station directory in the radio app on the phone).

Firmware wishlist for the MuVo Sport C

I would like to start a thread to discuss the suggestions for firmware update for the MuVo Sport C00. FYI, I am running firmware version .0.0. Please post your comments or ideas to my suggestions, or reply with your own comments.
Before I begin, I'd like to say that I think the C00 is an awesome sports player, but it could definitely be improved. My Fiance has the Rio Cali 256, which is also a good sports player. Right now I think it's a toss up between the Cali and C00, but I think the C00 has the potential to outshine the Cali. (I like the Cali's separate volume controls, but I dislike how it falls out of the armband.)
Here are my suggestions in my order of importance:
[urgent] Fix the stopwatch so that the user can change tracks while the stopwatch is running. You should be able to press "Menu' and toggle between stopwatch and music modes while the stopwatch is running.</LI>
[urgent] Fix shuffle mode so that it truly shuffles playback from internal and external memory. Right now it appears to select songs from internal memory 90% of the time. Also, I don't think the player has ever selected anything over the 200th song on the player for shuffle playback at the root level.</LI>
Provide the ability to select a specific song for playback from the Menu. Right now, you can only select the folder for playback and then navigate to a specific song from there.</LI>
Reorder the Menu icons, and place "Folder", "Stopwatch", "Music" and "Play Mode" next to each other. This would allow for easier and faster navigation while running.</LI>
That's all I can think of now. Does anyone know how to submit these to Creative's dev team so they can consider them for a future firmware update?
Message Edited by sixseven on 05--2005 02:50 AM

Definitely, point one in the list is the most urgent one (making player functions accessible without having to stop the stopwatch). This ridiculous flaw leads to the situation that from day one after buying the device it rests unused in my drawer. I do not agree that there is no marketing for this device. Actually, I bought this thing for 20 Euro after I read in an ad that this was the ideal mp3 player for sports. Maybe for 00m runners this is right (you barely change a music track during the2 seconds). But for any distance above 000m it is just laughable.
I wish there would not have been marketing at the time when I searched for a sports-mp3 player. I wouldn't have fallen into the trap to buy this crap. And that Creative is not able to provide a firmware upgrade which corrects this bug for about .5 years now is enought reason for me to make a BIG detour whenever I see a Creative product on a shelf.
Axel

Remote Supervisor Adapter II SlimLine Firmware Update for TD100

According to Lenovo document 54Y6198 I should be able to go to http://www-947.ibm.com/systems/support/oem/td100.html and download the firmware updates for the Remote Supervisor II Slimline adapter we purchased for our new Lenovo TD100 server (Model 6429-18U). However, the problem is that NONE of the links work and NONE of the files can be downloaded all I get is a web page listing a 404 error (Not Found).
Naturally the adapter won't work without the proper firmware, please help!

Try now, it works. there have been some issues which are fixed.
Jan Solar
Product Marketing
(not a technical support)
http://blog.lenovo.com/author/jsolar/

Firmware Update for my blackberry 8830 world edition with Bell Canada

Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?

You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5.

M20 firmware update for wps vulnerability

Can someone advise when Cisco will be releasing a firmware update for the Valet M20 router to address the WPS vulnerability problem (e.g. disable the feature, something which *should* have been incorporated into the router in the first place).
Thanks.

Cisco... does not care... about Valet people.
The most recent firmware was released in the 1920's, I believe. It's common practice in the technology sector as a whole to consider electronics as "legacy" devices after about 6 months to a year. Wish DD-WRT ran on this, your configuration choices are pretty much SSID, router's IP and the ability to enable or disable DHCP. Compared to open source firmwares like DD-WRT and Tomato... or even compared to other router firmwares (D-Link firmwares give a lot more control and access to advanced configuration settings-- if you can handle it). I think it's pretty clear that the intended market focus for these routers were... the users who... did not plug the power cord into the router because it said it was "wireless".
Uh oh, did I say that out loud? No... I typed it, though.
The hilarious thing about this is I work as a systems/network admin and have 20 years of experience... and this router gave me trouble when I just decided to be lazy and try setting it up using WPS and the setup program. What a disaster! I finally just did a hard reset and logged in via browser and did it the real way... but I found that extremely amusing, that by dumbing things down so much, it actually made the process (to me, at least) 10x more complicated!
Oh... I threw this one in place of my normal router because it has been acting really flaky lately... it has served its time and paid its dues, surely. I picked up the M20 on clearance for like $10 I think-- for this very purpose... to keep as a backup in my closet if my normal router decided to kick the bucket.
I'm online, so... I guess this Valet M20 is serving its purpose but the lack of configurability is just plain painful! You know what would be a great idea? For Linksys/Cisco to supply an alternative "advanced user" firmware that isn't concerned with giving users enough rope to hang themselves with. People like me and other users who know what they're doing will already know how to flash it and get going-- don't even bother with user guides and pleasantries. Not needed. Also not needed? The splitting headache that swap gave me. A "5-minute task" became a "45-minute chore". I did install the iPhone admin app and found it to be just as watered down.
It seems an odd thing to me that you'd add the option to totally change the SSID or password (something that would require you to update the configuration on all of your wireless clients), yet left out access to things that would be much more practical and useful from a smartphone-- like being able to view the logs-- I would actually find that very useful. I already know that it's a Valet M20. Could have skipped that. Now, being able to reboot the router without having to get up and go to the computer or have to go to the web admin page on my phone, strain to find that option on a page only coded for desktop display... that's useful. The guest enable/disable would be useful, too... if there were any guests here. For some reason, I can't get anyone to hang out... LOL. Ok, rant is finished, I was just testing the connection and ended up here after getting the latest firmware. Thought I'd take a moment to share my thoughts since I'm biding my time, waiting on someone at the moment. This post is an artifact and memorium of the time killed typing it up. Yeah, that's sort of a self-referencing, paradox-ish type thought, hmm. Ok, hah. Really leaving now...

Firmware update for the harddisk

Similar Messages

Maybe you are looking for