Firmware Update for WAG200G to fix Security Hole

Hello,
I use a Linksys WAG200G with firmware version  1.01.09, and recently became aware that this particular model has a publicly known exploitable backdoor (See: http://www.businessinsider.com/cisco-warns-about-security-hole-2014-1 for more info). 
Has this security hole been fixed? If yes, where can I download an update for it?
Thanks for your time,
Sam

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Similar Messages

  • Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

    Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer? 
    A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
    and allegedly should have the much of the same load-mechanism as the 8000 printer.
    It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

    Thanks for the advice to contact HP tech support!
    I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
    Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
    I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

  • WHY DOESNT NOKIE POST MORE FIRMWARE UPDATES FOR OT...

    I AM NEW TO THIS BOARD AND HAVE FOUND THAT NO MATTER WHAT I DO TO UPDATE MY NOKIA 6230i (FIRMWARE AND RADIO SOFTWARE)I MEET A BRICK WALL.
    IT SEEMS NOKIA ARENT INTERESTED IN GIVING YOU SUPPORT ONCE YOURE PHONE IS ANY MORE THAN A YEAR OLD.
    THIS TO ME IS VERY UNFAIR AS I HAVE SPENT A LOT OF CASH ON THIS PHONE TRYING TO UPDATE VISUAL RADIO USING THE DIRECTIONS PROVIDED WITH NO SUCCESS AS THESE DIRECTIONS DO NOT WORK AS I CANT FIND ANYWHERE TO DOWNLOAD THE THE NEW VISUAL RADIO WHILEST ON WAP.
    THIS TO DATE HAS COST ME £75 TRYING TO FIND THE LINK.
    ALSO I HAVE BEEN ASKING FOR THE FIRMWARE UPDATE FOR THE 6230i AS I SEE THIS AS BEING FAIR AS EVERY OTHER MOBILE THAT IS BEING POSTED CAN BE UPDATED OVER THE AIR AND THROUGH SOFTWARE UPDATE.
    WHY CANT MINE AND MANY OTHERS.
    EVEN IF NOKIA POSTED THE LAST RELEASED FOR EVERY MOBILE EVEN FOR THE OLD ONES I WOULD BE VERY GREATFUL .
    MY NOKIA HAS A VERY OLD FIRMWARE V3.40 THIS NOKIA KNOWS IS FULL OF BUGS AND SHOULD BE HELD ACCOUNTABLE FOR POSTING THE FIXES UNTILL THERE ARE NO BUGS TO SORT WITHOUT EXCESS COST OR HAVING TO VISIT A RECOMMENDED REPAIR DEALER.
    I WANT IT FREE JUST LIKE THE NEXT GUY SO NOKIA POST THE FIRMWARES AS SOON AS POSSIBLE AS I AM COMPLETELY FED UP WITH THIS FONE AND ITS BUGS.
    YOURS SINCERELY
    AN UNHAPPY CUSTOMER

    First of all, please locate the Caps Lock key of your keyboard; all upper case text is hard to read, and traditionally considered as shouting. Of course, you may already know that, and intended to shout.
    Anyway, most phones do not have the built-in support for do-it-yourself firmware updates.
    For such phones your options are (if you think you need a firmware update):
    - Take/send the phone to an authorized Nokia service/repair center, where the update can be done.
    - Buy relativelt expensive flashing equipment and locate illegally distributed firmware files and try it on your own with that.
    My advise is to go for the former rather than the latter option. The former should cost you anything (at least not for as long as the phone is under warranty & excluding what it takes for you to go there).
    As to downloading "THE NEW VISUAL RADIO WHILEST ON WAP", I don't know what you mean by that. I don't know a 6230i, but either it comes with Visual Radio built-in or not. Any updates/fixes to it would come with a firmware update, but not over WAP.
    Note also that you don't need the Visual Radio service to listen to FM radio channels, and most radion stations do not support the "Visual" bit at all (if they do, the support is indicated in the station directory in the radio app on the phone).

  • Remote Supervisor Adapter II SlimLine Firmware Update for TD100

    According to Lenovo document 54Y6198 I should be able to go to http://www-947.ibm.com/systems/support/oem/td100.html and download the firmware updates for the Remote Supervisor II Slimline adapter we purchased for our new Lenovo TD100 server (Model 6429-18U).  However, the problem is that NONE of the links work and NONE of the files can be downloaded all I get is a web page listing a 404 error (Not Found).
    Naturally the adapter won't work without the proper firmware, please help!

    Try now, it works. there have been some issues which are fixed.
    Jan Solar
    Product Marketing
    (not a technical support)
    http://blog.lenovo.com/author/jsolar/

  • Firmware update for 6131 does not work

    I am trying to upgrade the firmware on a 6131. Following the instructions on the site leads me to navigate the following path: Menu > Settings > Phone > Phone updates > Download phone software.
    Bzzzzzz. No. 'Download phone software' is not an option. Only 'Current software details' and 'Install software update'. The latter option is dim, and selecting it returns a message: 'No software to install', obviously, because it has not downloaded it.
    So I try to push the software from Nokia's web site: http://www.nokia.co.uk/nokia/0,,77073,00.html > Get Advanced Settings > Accept Terms > Start > model 6131 > Next > Nokia software (firmware) update over-the-air > Enter security code and my phone number > Order Settings
    The page claims it has sent me a text message, including the new software, but it never arrives. I tried with with other 'settings' from the same page several times, and the text messages did arrive just fine for those.
    Please help. Thank you,
    --Jimbo -
    P.S. In case you are wondering, the reason I am trying to update the firmware is that the status of the voicemail waiting indicator is never updated. I have seen at least a dozen posts about that issue, but never one with an answer attached. So this is my next step.
    EDIT:removed email addressMessage Edited by jams on 16-Oct-2006
    02:34 PM

    Do you mean you're having a problem trying to download the update, install the update, after the update is installed trying to re-activate the phone? I assume you're getting this message on your PC, not the phone...? Or are you having problems with Internet connectivity on the phone itself? WiFi or 3G?
    If it's problems on the PC, try disabling all antivirus/firewall software and see if that takes care of it.

  • Does the new 7.1.1 Itunes update have a firmware update for the 3G?

    Hello, I downloaded the new i-tunes update, does it have a firmware update for the I-phone 3G? and if so can anyone tell what it is? and what bugs it fix's? Thanks....

    Release notes state only “iTunes 7.7.1 includes fixes to improve the stability and performance.
    no firmware update for iphone

  • Is there any way to get firmware update for my DVD-RW Drive from Ultra 40?

    Hi, I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
    While I do enjoy working on my U40 workstation, its DVD-RAM drive is wll pretty bad.
    It just fails to burn DVD/CD-R/RW media too often.
    Yes, I got it serviced, but it's just the same.
    So my final hope is to get the latest firmware, becuase latest firmware often solves such media compatability issues.
    Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
    So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
    I did contacted Matshita for this matter and they tell me to contact Sun. But I cannot even find email address for Sun Support or any. sigh...
    Thanks.
    Sang

    Hello Sang,
    I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
    Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
    So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
    I did contacted Matshita for this matter and they tell me to contact Sun.
    I did review the Full Components List for the Ultra 40. The only DVD drives listed (Part No. 370-7970) are Panasonic UJ-485 and Teac DV-W28SLA-093. Both aren't capable of reading or writing DVD-RAM.
    In some countries Panasonic uses Matshita as brand name.
    I did a search on SunSolve with the keywords DVD firmware.
    Sun supplies only firmware updates for two DVD readers: Toshiba DVD 1401 (fixes: unable to boot from Solaris 8 DVD) and Toshiba SD-C2732 (fixes: returns incorrect data).
    I was unable to update the firmware of the SD-C2732 (Sun part) with the Sun patch. The drive was attached to an Ultra 10 (with an adapter). I ended attaching the drive to a PC and using a DOS boot floppy with the Toshiba flash program and the Sun firmware.
    Regarding you problems with the drive: Have you tried another brand of media. The Ultra 40 is under warranty (GA date was February 14, 2006).
    Use the contact information from your other thread.
    If you search the net for firmware you can locate sites that offers region-code-free firmware for several drives. Usually they provide a flash program (requires creation of a DOS boot floppy). Using these programs/firmware voids your warranty. Maybe you can not revert the firmware upgrade.
    These slimline drives have no jumpers, the installed firmware (of the drive) determines if the drive is master, slave, uses cable-select (CS) or reversed CS.
    Michael

  • Firmware update for SRX200

    I've got an older SRX200 that is starting to "disconnect" frequently (loss of wireless connectivity).  I've gone to the Linksys website to download a firmware update, as a potential fix, but the website says no firmware is available.  The current version I'm using is 1.01.18.
    Any advice?  Maybe it's just time to buy a new router...

    Due to the rules that govern the use of this firmware, Linksys/Cisco is no longer able to provide this firmware for download. Therefore you will not able to upgrade the firmware in the Router.
    If you are facing the frequent disconnection from the network you can try the combination of settings:
    # Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
    # Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page)
    # Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 1, 3, 6, 9, and 11. Click Save Settings.
    Then check the wireless status.

  • Firmware update for Superdrive G4 Mini

    The latest firmware update for "some" superdrives had me hoping that the nagging problem would be fixed, alas, no luck.
    MATSHITA DVD-R UJ-845C:
    Firmware Revision: DPP9
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Now I know for a fact that this drive does support burning -DL DVDs, except it has been crippled by Apple. Thank you.
    What are the odds this would ever be rectified?

    Hello,
    What are the odds this would ever be rectified?
    Not likely.
    The Mac Mini G4 is now a discontinued product.
    Apple will generally only go backwards to fix problems. They don't usually go back to add features to machines that have been discontinued and replaced with a new model.
    So, if there was an update necessary to restore operation of the drive, then they would probably release one.
    But, if there was a way to enable the drive to burn media it doesn't currently burn, then they are not going to do it now.
    They are more interested in selling you a new system with the features you want, than enabling the features you want on a product you already own.
    But, that's just the way things are done.
    I hope this helps.

  • MacBook SMC Firmware Update 1.0 Just Fixed My Mooing :)

    Thanks Apple! The Newest Firmware Update for the MacBook, seems to have fixed my fan problems.
    -Internet Wiz™

    Indeed, no more mooing! Runs cooler too! Apple rocks!
    Tom

  • Graphics Firmware update for iMac with with NVIDIA GeForce 7300 or 7600 GT

    I am one of the many with an 06 24" iMac that has the graphics card glitch. Downloaded and installed this firmware update today and worked all day with no issues. The update says it is for users that are running Windows 7 in boot camp.
    Is this coincidental and the firmware fixed the issue so many of us have with these iMacs with the NVIDIA cards or did I just jinx myself and my problems are bound to return?
    Guess I will know soon enough!
    http://support.apple.com/kb/DL978

    I've seen all sorts graphics problems mentioned. Apple sells millions of Macs per years, so any potential problem is bound to happen to at least a few customers. Assuming that people can read your mind is not a very good way to get responses.
    On the other hand, if you describe the problem in detail, people reading the forum and looking for solutions may actually find your post through a keywords search, and your finding about installing the firmware update for Windows 7 may help then too, after confirming their problem is similar to your problem.
    But that's up to you...

  • FIRMWARE UPDATE FOR NOKIA E5-00

    can someone help me on this. i have the nokia E5-00. when i am going for a software update, its showing a result as no latest updates available. but when i searched the latest update available for my product via product code, there is an update. my software version is: 042.010 latest available update: 042.021 or even higher, i have no clue. Can sum one help me on this, i want the latest update for my nokia E5-00. i am from india...does the region matter...????
    Solved!
    Go to Solution.

    hi,
    the new version of firmware .014 has intermediately fixed the switched off issue but still happens , but the phone is still very slow, a hard reset and a firmware update both have not fixed it, nokia is acting like a sleepy cow ,waiting to be put out of business while other mobile o/s companies comes up with updates for any issues with there phones ,nokia likes to have people waiting frustrated , shame on them.
    From my initiate analysis I believe nokia is not able to successful manufacture phones with 600 much arm 11 processors there phones come with a bundle of glitches.and defects
    varunseth wrote:
    Finally i have updated to v42.014....thank god...!!!
    I strongly advice them to recall the faulty phones ,its deemed unfit to be called a smart phone.

  • How do i install firmware updates for time capsule?

    How do I install firmware updates for time capsule?

    If you are using the Lion or Mountain Lion operating system on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon
    A message will be displayed if there are any available updates. Click to update if that is the case.
    If you are using the Leopard or Snow Leopard operating system......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, the click Manual Setup
    Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

  • Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

    Hello Apple Support Communities,
    I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
    Here are the specs that the page requested me to find:
    Model Identifier:          iMac10,1
    Boot ROM Version:          IM101.00CC.B00
    SMC Version (system):          1.52f9
    Someone please help, this has been bugging me for a while.

    I took all the precautions and asked all the questions,
    Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
    http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
    It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
    Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
    http://www.hddfancontrol.com/
    BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

  • Where is the firmware update for my ipod touch

    I recall that there was a firmware update for my 1st Gen Ipod Touch. I did not do it at the time, but would like to do the update now to the most current firmware available for my touch. I am now on version 2.2.1 (5H11) Can anyone tell me where I can find the newer firmware? Is there any benefits to the new firmware or should I just leave it as is?

    Purchasing iOS 3.1 Software Update for iPod touch (1st generation) - http://support.apple.com/kb/HT2052
    https://discussions.apple.com/thread/3009667

Maybe you are looking for