Firmware update made MacBook Pro hotter?
I just installed the SMC Firmware updater and now CoreDuoTemp reports an average of 63-64C. Before it was reporting around 34C on average. ***?
Are the fans now quieter, ie. did the install of SMC instruct the fans to slow down so as to specifically keep the CPU temp at 63-64C?
Similar Messages
-
I was updating my macbook pro and it restarted but didn't boot up. It made it to the gray apple screen with a spinning wheel underneath it. What do I do?
This was happening to mine as well and I had to take it in a few times and they had to wipe it completely. If your computer is more that 5 years old, it may be that it is time for a new one. I suggest taking it in so they can diagnose it!
-
I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?
I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics? -
does anybody know what happens if I dont update the firmware of my macbook pro (does not have a guid partition scheme)?
Apple will hire a high school girls clique to follow you around, make fun of you & post disparaging comments on Facebook .
-
Problems after efi 2.5 update on macbook pro 13 inch(mid 2010)
i don't know if it's related but after i updated my macbook pro 13 inch mid 2010 efi firmware to 2.5 i'm having usb problems.
the problem started after i went to software updates and downloaded efi firmware 2.5, but i didn't restarted right away actually i downloaded the efi firmware around 3pm and shut down my computer around 1am, and in the morning when i turned on my mac it made a strange noise and then restarted. then when it restarted my usb external hd wasn't working well, it takes around 10 minutes for me to be able to watch a video directly from it, and my 3g usb connects but the speed is really slow, so i cant use it. i don't know if efi firmware update is related to usb, but somehow it made my usb ports stoped working properly.
so is there a fix for this?What you should do is time consuming but really helps (it helped for me)
Go to your disk utility setup and select your harddisk drive, then click on verify disk permissions and after that repair disk permissions, don't ask me why it runs in this order but it seems to elliminate the cause. you will most probably see some repairs being listed.
the next step is to "repair disk" procedure, allthough it could be possible that it can not and then it will tell you to use your setup disk that came with the computer, insert disk hold command and "R" at same time and you come into the menu to repair or re istal software etc.
I ran the repair mode, then re installed my operating software and it seem to resolve this issue but also the long start up problems.
good luck -
Hi All,
I have updated the Macbook Pro from 10.7.5 to 10.9.1 today and once it is done I restarted the system and it keeps on crashing/restarting the system every 2 min.
I have found the below backtrace. Please help me fix this issue.
Anonymous UUID:
C72C8841-51A0-BB21-689C-2AB204820087
Mon Dec 30 23:57:23 2013
panic(cpu 0 caller 0xffffff801da5260f): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 0), Frame : Return Address
0xffffff8096bf3690 : 0xffffff801da22f69
0xffffff8096bf3710 : 0xffffff801da5260f
0xffffff8096bf3770 : 0xffffff801da51d09
0xffffff8096bf3870 : 0xffffff801da2aa2f
0xffffff8096bf38a0 : 0xffffff801dde080d
0xffffff8096bf38e0 : 0xffffff7f9fcada11
0xffffff8096bf3930 : 0xffffff7f9fcae16e
0xffffff8096bf39a0 : 0xffffff7f9fcae523
0xffffff8096bf39d0 : 0xffffff801dc13438
0xffffff8096bf3a00 : 0xffffff801dd83378
0xffffff8096bf3a70 : 0xffffff801dbfd1ae
0xffffff8096bf3ae0 : 0xffffff801dbf437a
0xffffff8096bf3b80 : 0xffffff801dbe5f15
0xffffff8096bf3c30 : 0xffffff801dbe67d2
0xffffff8096bf3f50 : 0xffffff801de3de23
0xffffff8096bf3fb0 : 0xffffff801daf3e06
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-328 6-B827-66DB3FE3DB7B]@0xffffff7f9fcac000->0xffffff7f9fcaffff
BSD process name corresponding to current thread: applet
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 172506613860
last loaded kext at 107245362778: com.trendmicro.kext.KERedirect 1.0.0 (addr 0xffffff7f9ff33000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.logmein.driver.LogMeInSoundDriver 1.0.0
org.virtualbox.kext.VBoxUSB 3.2.6
org.virtualbox.kext.VBoxDrv 3.2.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Please help me fix this issue.
Thank you,
NishanthPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
After I updated my Macbook Pro today with 6.0 and my iphone with Itunes 10.7 my playlist don't show up and I can't sync them to my iphone.
Old playlist appeared on the iphone that I have deleted a while back but all the new stuff I can't on.
Please advise?Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Firmware update on macbook 4.1?
firmware update on macbook 4.1?
ok, but why only macbook 4.1 & macbook pro 4.1 2008? other generation macbook have firmware update..
-
I updated to MacBook pro last night and now safari won't open
I updated my MacBook Pro last night and since I did this I can not open Safari. It crashes and sends a report to Apple. Not tech smart enouh to figure it out can anyone give me simple suggestions?
ted39 wrote:
I updated to OS 10.8.2 and now Pages won't open
Please elaborate on what exactly you mean by it "won't open".
Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
If the application crashes, please post the contents of the crash log here.
Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here. -
I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test. -
When I updated my Macbook Pro to Maverick, I lost I Photo. It seems as if my pics are still on the laptop, but I have a really hard time finding them. I no longer have I Photo. Can anyone help me in getting that application back and putting my pics back in it? I loved the faces feature. Thank you!
Run the >software update>iPhoto
If you have a legit copy of of iPhoto you are eligable for the Mavericks compatible version. Look for it in your applications folder along side the older versions.
If not purchase it on the AppStore to regain access to your iphoto library as you knew it. -
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?
I Did my usual software updates and it downloaded n asked me to restart so I did, and now it's not starting up
-
I updated my Macbook Pro last week to Lion. I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!
Please! I need an answer fast!!!!Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
Maybe you are looking for
-
How to hide dynamic parameters values in the URL with Reports 6i
Hi, I want to know a way of hiding the parameters values when asking for a report through the web. Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameter
-
How do I add a Bing to my search bar?
When I try to add Bing to my search bar in FF 35.0.1, I get the following message: Firefox could not install the search plugin from "https://addons.mozilla.org/firefox/downloads/latest/10434/addon-10434-latest.xml?src=search" because an engine with t
-
Can't import a jpeg file to iPhoto
Hello, I'm having trouble importing a jpeg file from another user to my iPhoto. We are both admins, file sharing is on for both users, read and write is on for both users. (I toggled file sharing on/off to see if it would update, and no changes). In
-
Finally took the iTunes 11 plunge - some observations, and a question.
So I finally took the plunge, and committed to using iTunes 11 as my main player. I was using iTunes 10 as my main player, then rebooted to a spare disk with iTunes 11 when I needed to update my iDevices. I briefly tried iTunes 11 when it first came
-
MacBook Pro Late 2013 Bootcamp doenst work HELP!
Hey, so I'm using a late 2013 MBP with Retina and i want to Boot Camp and do Windows 7 on it. I have a version of Windows 7 Professional 64bit version on my desktop and a 16 GB USB 3.0 USB plugged in my mac. After i start the Bootcamp Assistant and s