Firmware update messed with airport.

After downloading firmware update my airport wont work.
any ideas???
thanx in advance

I reset the Airport Router. I downloaded a new Airport Utility. Airport bars come up, but Airport light is flashing amber. When I opened the Utility, it did find the router (whereas before there was no router). I went through the Utility and when it came to "update" I click on continue. Error!!!! Airport lost again.
I reset Airport Router again. Went through Utility but did not update. I know have internet on both computers (had to go through same thing on laptop, but did not click on continue update. Learned my lesson there. I do believe that the problem with the firmware update is the Utility Update. Don't click on continue, wait for Apple to fix it.

Similar Messages

  • Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update
    Yes.
    and installed automatically?
    No (at least, I can't think of one that has automatically run). Usually Software Update will download an updater that you then need to run separately. Usually the updaters will be installed to the Utilities folder ready for you to use.

  • Latest Firmware Update Issues with Screen Sensitivity

    Hi All,
    I synced my original iphone a few days ago and it required a firmware update. Since then, I have had numerous problems with the touchscreen for email and texting. Sometimes, I cannot open a folder on one of my emails or send a text because hitting the "send" icon does nothing. I've restarted my phone and reset it but have not yet tried a restore. Had anyone else had these issues?
    And do you have any other suggestions I should try before doing a restore? Many thanks.
    Kathy

    Do not know about its compatibility and functionality.. but if you are OK with Beta softwares.. you may have a look at..
    http://betalabs.nokia.com/blog/2011/03/16/nokia-software-updater-for-mac-available-in-beta?restsso_p...

  • Firmware update N80 with Vodafone

    Well finally last night I got to upgrade my N80 to 4.0623.0.41 of the firmwear. I was so happy...........
    ..until I started to use my phone, pronlems and lots of em.
    Themes that I have used before on my N80 and have functioned/looked as they should. Now in idle mode, have a hole in them, through to some theme I dont even have. (The area looks similar to where a picture would go if you choose one in edit theme)
    I can't pair with my Mac now, this used to be one of my most reliable bluetooth connections, even though I read elsewhere people were having problems with this.
    Also, until I did a firmware keypad restart, it wouldn't open themes. Well it would, but it would crash and kick me out straight away. This is fixes now.
    I cold take pictures and they would not show in gallery. But there where on phone as I could explore to them.
    But what a joke, I really am slowly loseing faith in Nokia, looks like I'm joining quite a few people. I thought I would never get any other phone apart from nokiaMessage Edited by stevieh590 on 14-Nov-2006
    03:51 PM

    Sincerely, you think it might work cos you read somewhere it is supposed to work or it might work cos you've seen it working or at least somebody actually told you it worked?
    I'm having the same problem and I've read through ALL this forum and NOWHERE I've read no whatsoever working way to solve this issue. And the fact that this is entirely Creative fault never cease to amaze me. We updated the exact way the instructions ordered and the updater killed the player.
    Now I believe that there is a part of the problem that the admins still don't fully grasp, and that's the fact the the updater, any firmware updater, once the issue manifests, DO NOT see the player connected anymore. Although it is in reality connected accordin to Windows and the typical symbol of successful connection on the player. Connection that it is not useful for the updater NEVER see it anymore and the player won't go out of Recovery Mode because of the simple life fact that THERE IS NO FIRMWARE IN THE PLAYER, hence even battery recharging it is going to be an issue.
    Still can't believe why they keep that updater online.
    "If you have an unhappy customer on the Internet, he doesn't tell his six friends, he tells his 6,000 friends."
    Jeff Bezos, CEO - Amazon.com

  • HT204032 is this firmware update compatible with Lion?

    I have set my MacBook Air to dual boot Lion and Mountain Lion, is this firmware update (MacBook Air SMC firmware update 1.6) compatible with Lion?  So if I boot the MacBook into Mountain Lion, accept the firmware update, and then boot into Lion will I have any problems?

    Thanks for the responses, but they really don't get me any further because they don't contain anything that I couldn't have inferred myself. I've been developing software for nearly thirty years and just because Lion won't be using this particular feature doesn't mean the change won't break something else.
    What I really need is an assurance from Apple that this update has been fully tested on Lion.
    I don't have a compelling need for this Power Nap feature so I won't install this update for the moment, unless Apple issues the assurance.

  • Firware Update Messed with Fan

    Hi All, I just installed the latest friware update for my Macbook.
    The fan used to run full speed after a little while of paying a game, or watching a DVD. Now the fan runs FULL speed all the time while doing those things. I can no longer watch a movie or play a game with out a loud whirring sound. This makes for a tough quiet time or when i am in the library.
    Does anyone know what to do about the constant noise, or how to unistall the firware update?
    Thanks,
    Pete

    My MacBook started doing the same thing after installing the Firmware Update. I read several posts but did not find a solution. I called Apple and here is how we fixed it:
    -Disconnect everything from the computer including the AC powercord
    -Quit all programs and shut the computer down
    -Turn the computer over and take out the battery
    -Turn the computer back over with the battery out and open the screen
    -Press and hold down the power button for a FULL 5 seconds then release it
    -Turn the computer over and put the battery back in
    -Connect the AC power cord
    -Press the power button - as soon as you hear the startup chime hold down the Apple key, the option key, the P key, and the R key. When you hear the chime again release all 4 keys.
    -You have just reset the PMMU and the PRAM
    -My fan has not come back on since!!!!!
    MacBook   Mac OS X (10.4.7)   Snow iMac, G5 iMac, 15 gig iPod, 60 gig iPod Photo
    MacBook   Mac OS X (10.4.7)   Snow iMac, G5 iMac, 15 gig iPod, 60 gig iPod Photo

  • Edge update messed with timing of objects (was: Adobe Edge update - bugs)

    Creating simple animations for e-cards and the new update definitely messed with timing of objects, and is creating erroneous instances of symbols.
    Still can load the original version and plays fine, but just loading the version in the _updated folder that was created when original version was opened after update is messed up.
    Really disappointed with this update, I really dislike doing my work twice.

    Hi Jess
    We are investigation the problem and is being tracked in our internal issue tracker.
    Thanks for reporting the same.
    Regards
    Avinash

  • Firmware update problem with raid mirrored drives and solution

    Note this - the firmware update will not install from a software mirrored boot drive. It will install just fine from a non-mirrored clone. So, make a clone, set it as your boot drive from system preferences, and all is good.

    Well this is a pain, this is what I figured I would have to do but c'mon apple, I am sure people are not going want to hassle with making a clone, finding or buying a single drive to install the OS to, boot that drive, install the firmware patch, reboot, make sure it took, tear down the system, swap the soft-RAID set of drives back in etc. etc. etc.
    This is another reason why Apple need to take note from the PC world, I know they like to "Think Different" when it comes to things like this but they really need to give access to and write a driver for the supported on-chip hardware RAID controller located in the Motherboards Southbridge chip of THIS motherboard, just like all other woodcrest Xeon based systems running the same intel motherboard chipset!
    I am sure this post will get me a long list of flames from the Apple fanboys explaining how what Apple is doing is really better, or telling me that if I want hardware RAID 5 to just go and buy $6000 xServe RAID setup.
    Well I better quit typing so I can tear apart my system, find a hard drive to install OSX on.....See you guys in a few hours

  • My iphone 4 keeps failing to restore at firmware update point with -1 error code - have tried on multipke computers and will not restore ??? please help

    I woke up this morning - xmas day of all days and had a message on my phone that it needed to be restored via itunes. I connected it to my laptop and it tried to restore but failed at the point of iphone firmware update. I have back-ups etc - I have tried it on two different laptops and have tried at least 10 times but keeps failinhg at the same point - has anyone else had this and found a cure or is the phone dead. Its on ios 6.0.0.1

    Error -1 could indicate a hardware issue. You may need to take the device to an Apple Store and have it looked at
    Read here > http://support.apple.com/kb/TS3694
    Sorry for the bad news

  • No chance for a Firmware Update for my AirPort Express 802.11n (1st Generation) with The AirPort app in my ipad 4. can anybody help me?

    Hi Folks,
    I wanted to re-activate my First Generation AirPort Express to Stream Music in another room. Unfortunatelly i cant Update The Firmware of the first gen airport express with my AirPort App on The ipad 4.
    For my online Access i use The AirPort Express newset Generation Woche Works pretty well.
    What can i do to use The Old AirPort Express for AirTunes purposes only?
    Thanks in advance for your advices,
    Daniel

    when im searchin for available wifi connections in my house, there is a "AirPort Express e55137" Hardware. When i click on it it sais, i cant configure the Base Station with the Software on the ipad
    This tells me that you do not have a 1st Gen AirPort Express. If you did, you would be able to configure the Express with the iPad.
    If you have AirPort Utility 5.6 or AirPort Utility 5.6.1 on your MacBook, you can configure the Express using the MacBook.
    If you have AirPort Utility 6.x on your MacBook, then you will not be able to configure the Express unless you try a workaround to install an older version of AirPort Utility on your MacBook.

  • Airport update messes with Magic Mouse swiping

    After installing the update and restarting, and having repaired permissions before and after, the swiping function of the MM stopped working. It was necessary to re-install the MM driver in order to get it working again. Anyone else experience this?

    Yes! After installing the update just 15 minutes ago the swipe function quit. I have repaired permissions but I guess I will have to re-install the driver too..

  • HT1218 I am now getting a "Device not Found" error after a firmware update for my Airport Express.

    I use my Airport Express to stream iTunes to my stereo and it was working fine before the update. After the update it only said "there was a problem upgrading the firmware". I now have NO option to choose speakers in iTunes. Can anyone help me fix the problem? TIA.

    I can't explain why but my airport express is now working normally. The only thing I did was to connect it to my router with an ethernet cable (light was green) then disconnect it and move it to the stereo in another room and connect it there. The light was flashing orange after the startup (about 5-10 minutes). When I looked an hour later it was solid green.

  • Express Firmware Update Fails with error -19

    trying to upload firmware using windows xp sp3 and airport utility v 5.5.1.
    windows and any other firewall is disabled.
    tried wired and over wifi.
    also tried from another windows xp sp2 computer.
    tried uploading 7.3, 7.3.1, 7.3.2, 7.4.1 and also 7.4.2
    fails every time with error -19
    meanwhile configuration of the device and playback with itunes works.

    What device do you have?
    What is the version of firmware that you have now?
    Did you temporarily turn off the anti-virus on the PC?

  • Firmware update ends with 3256 error

    os many times tried to download 4.3.3 firmware updtes so many times it failed

    Hi,  I have had the same problem with my ipod 4 and my daughters ipod 3.  Some of the other threads suggest you need to turn off your firewall which I did but still ahd the same problem so I also teuned off the antispam and antivirus protection (this is using ESET security SW) and the download and install worked.  The settings may be different on your security SW but you need to temporarily turn off the file system protection as well as the firewall in order for the install to work.  Don't forget to turn it all back on when you've done.  Not sure why you have to go through this pain but ... it seems to work.  Good luck.

  • NAT update Messed with automatic back up

    as i was working on my mac, a pop up window asking me to update to NAT security for the time capsule. i did this and i got the flashing amber light and could not get online. i used the reset button on time capsule and then reset my airport config. was able to get online. tried to manually back up and got a failed message. went thru this a few more times. finally erased my back ups, thinking that would solve the issue, no luck. tried disk utility - couldn't see TC. any help is appreciated. thanks.

    Neither the Time Capsule nor its disk will appear in Disk Utility.
    The Time Capsule itself should appear under Shared in Finder and should be discovered by the Airport Utility.
    The Time capsule disk should appear in a Finder Window if you click on the Time Capsule name in Finder. The disk should also appear in the Airport Utility -> Manual Setup -> Disks.
    Does your TC appear in any or all of these 'venues.'
    When a backup fails the little red 'i' nest to failed should reveal a reason if you click on it. The reason may be fairly general but it's a start.
    Also the system.log in Console may give more details about the failure. The relevant entries include not only 'Time Capsule', Time machine but also 'backupdb.'

Maybe you are looking for