Firmware Update needed to use DDM with DP 1.2

As a broadcast to all with the problem of Dell Display Monitor software (produced by "En TechTaiwan") working with DP 1.1 but not recognizing a dell monitor being attached when the monitor I/O is changed to DP 1.2:
I emailed "[email protected]" with the following request:
Subject: Dell Display Manager Ver. 1.22.0.1554
Hi,
The above software is unable to detect my Dell U 3014 monitor when I have set the mini DP port to DP 1.2.
If I set the DP to DP 1.1 the DDM software can detect the monitor.
Please update ver 1554 to fix this problem.
I received the following response:
"I'm afraid this is not a software problem, and cannot be fixed thru a software update. It requires a monitor firmware update."
I have a U 3014 (A04) with this problem but from the many complaints on this forum from dell customers with different monitors this necessary firmware upgrade is not unique to U 3014 monitors.
I am eagerly awaiting dell's firmware upgrade, but wondering how the firmware can be installed without sending the monitor back to the factory or a service depot. (Although eager I won't be holding my breath).
...and Chris, this should relieve you from having to make up excuses and wasting everyone's time and efforts with them - just tell them the truth.

The U3014 is not equipped to do a firmware flash update in your home. If a firmware update is released, it is installed in our service centers on returned product only. The only way you could get a different firmware flashed monitor is via used exchange. Even then, there is no guarantee what revision you would get. The only monitor in our entire line that is capable of receiving a firmware update in your home is the U3415W.

Similar Messages

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E?

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E? I'm trying to burn a DVD using iDVD on my iBook. The blank DVD's are Memorex 16x (I've used Memorex 8x successfully in the past), the DVD drive is specified above. The finder tells me that the drive has reported an error "sense key=medium error/ sense code=0x73, 0x03" I couldn't find firmware updates in either Panasonic Matshita or Apple websites. Am I forever confined to 8x DVD-R's with this laptop?
ibook G4 Mac OS X (10.4.7)
ibook G4 Mac OS X (10.4.7)

First, welcome to the discussions.
Sorry, No Firmware update to allow you to burn at 16X.
The drive you have is only capable of burning at 8X.
You will also find that for the most part when you recieve errors that it is more often than not attributed to MEDIA.
There are so many problems with the cheaper media they are to numerous to cover.
DVD is not at all like CD burning, in that the technology as well as the Optical Drives used, seem to be touchy, and require the use of good Media. This will allow you trouble free burning without errors.
http://www.digitalfaq.com/media/dvdmedia.htm
You will also find that the reason that DVD-R Media works the best, is because it is the most wirely used and recognised in both Computers and Players.
If I may suggest. There are several 16X DVD's on the market.
Take your time and look at the back of the Jewel Cases and read. You will see that the better Media will tell you that it will burn at 1X through and including 16X, if your drive is capable of handleing these speeds. I prefer Maxell 16X DVD-R Media in the individual Jewel Cases. This Media burns at the slower speeds on the older Superdrives that will only burn at 1X or 2X.
Like many others I have learned my lessons the hard way.
Cheers Don

N91 4GB Users Firmware Update Needed!!! [Nokia Mod...

Dear Nokia Moderator can u pass this topic to the N91 Firmware Update Team please?
The N91 4GB Edition has the following faults in the v2.10.013 Firmware:
- Ringtone Volume Low without any Headset Connected
- Ringtone Volume Low with Heavy Bass via Nokia N91 Headset Connected
- Ringtone output volume does not sound loud as Music Output Volume
- Music Library unexpected freeze
- Camera Image Quality Poor (When set to High Image Quality)
Please N91 4GB Users please post ur problems with v2.10.013 firmware so Nokia can Update the Firmware for it.
What needs to be added/fixed in the new Update for N91 4GB:
- Ringtone Volume Loud as Music Player
- Music Library Update
- Audio Visualisations
- Support for A2DP
- Camera Quality Update
- Loudness Option need to be Working
- HDD Options ie defragment/scandisk etc
N91 users post ur comments
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

If you want Nokia to get this sort of message, you're probably going to have more luck using the "Contact Us" link at the top right of this page.

Updating large table using the WITH CLAUSE or PLSQL

I tried to perform an update on a table with over 15million records using the merge statement below but it's very slow.
Can someone help me re-writting this statement using the WITH CLAUSE or a PLSQL statement that will make it run faster?
my merge statemet:
MERGE INTO voter dst
USING (
SELECT voterid,
pollingstation || CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY pollingstation
ORDER BY surname, firstnames
) <= 1000
THEN 'A'
WHEN ROW_NUMBER () OVER ( PARTITION BY pollingstation
ORDER BY surname, firstnames
) BETWEEN 1000 AND 2000
THEN 'B'
ELSE 'C'
END AS new_pollingstation
FROM voter
) src
ON (src.voterid = dst.voterid)
WHEN MATCHED THEN UPDATE
SET dst.new_pollingstation = src.new_pollingstation
the with clause approach:http://www.dba-oracle.com/t_with_clause.htm
thanks.

Well, here's your query formatted for people to read...
MERGE INTO voter dst
USING (SELECT voterid,
              pollingstation || CASE WHEN ROW_NUMBER () OVER ( PARTITION BY pollingstation ORDER BY surname, firstnames) <= 1000
                                       THEN 'A'
                                     WHEN ROW_NUMBER () OVER ( PARTITION BY pollingstation ORDER BY surname, firstnames) BETWEEN 1000 AND 2000
                                       THEN 'B'
                                     ELSE 'C'
                                END AS new_pollingstation
       FROM voter) src
ON (src.voterid = dst.voterid)
WHEN MATCHED THEN
UPDATE SET dst.new_pollingstation = src.new_pollingstation
;In future, please read {message:id=9360002} and post relevant details.
What do you mean when you say it's "slow"? How have you measured this? Have you examined the explain plan?
Take a read of the threads linked to by the FAQ post: {message:id=9360003} for details of what you need to provide to get help with performance issues.

Firmware update on MBP ruins connection with iMac

After the firmware update yesterday, the finder on my MacBook Pro is no longer able to transfer files from my iMac to my MBP or vice versa. Most folders on my other mac are visible, but some crash the finder, transferring files gets part of them moved over, but then it stalls and crashes the finder.
Seems like a serious bug. Or has the firmware update simply removed the file transfer possibility at all?
Reinstalling Lion wasn't even possible as the recovery program stalled as well. It was not possible to choose a language. Looks like a serious problem.
Any good suggestions to fix this?

After several hours of downloading, Lion was reinstalled. I had thought that my recovery stick would be enough to recover Lion, but it took hours and hours of downloading ("additional components") and installing to get it back. Wifi flipped out each time, so that did not work, I had to use an ethernet cable for the connection. And I don't know if the existing problem with the finder (not being able to properly connect to my iMac and transfer files) has been solved now. I'm a bit afraid to check it out. Just imagine the problem still exists!
Anyway, if this is the future, downloading restored os x and apps from the Apple servers, then I am afraid I'll let this cup pass from me.
I am still shaking.

Dear Sony Moderator: Spotify Connect Firmware Update Needed

Dear Sony Moderator, Lots of users are reporting issues with disconnects on various devices. (I have the STRDN860 AV Receiver) Though Spotify Connect was introduced in the latest firmware update, it needs improvement. Just thought you would like to know. If you are aware of any forthcoming firmware updates, I would appreciate you letting me/forum know. Thanks! TN

Hi tn5280,
Please visit http://esupport.sony.com/ for the latest updates.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Please help me, I need to use Flex with CF

Hi everyone,
I am starting to retract my brain from an intense 2 days to
figure out how to use Flex with Coldfusion. I am using Coldfusion 8
Beta (this part is good, don't need help for CF itself). I am also
using Flex Builder 2 (with chart but this not the topic). I
installed FDS 2.5 before to install ColdFusion 8 but I think CF8
have is own FDS or something like that... anyway, it might help to
mention it!
Well, I tried HTTPService, RemoteObject, WebSer vice -
NOTHING WORKS!!! Argh! Did I mention I spent 2 days? ;-)))
Well, I start with the basic: a login form with an email (as
a username) and a password to be validated. I have a CFC to do the
validation and return a simple message (string): "OK' when it is
valid and a custom message when it is not valid; depending if it is
the password and/or the email which is not valid.
I always got an error. Since the error is different depending
of the method I use, I will explain the latest method I used in
this message and try to concentrate on that method specifically!
The method is WebService and here is the error:
faultCode:Server.Error.Request
faultString:'HTTP request error'
faultDetail: 'Error: [IOErrorEvent type="ioError"
bubbles:false cancelable=false eventPhase=2
text="Error #2032: Stream Error .
URL=http://localhost:8501/iDashboard/login.cfc"].
URL: http://localhost:8501/iDashboard/login.cfc'
Any help will be very useful!!!
Thank's

Cyber,
This may be what you are looking for. It worked well for me.
Flex is sweet, but with the number of people confused about setup
with CF they sure aren't making any friends.
Flex/ColdFusion
setup

After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions

Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of the iPod touch with my home theater system.

- Check to see if there is a firmware update for the theater system
Sometimes this works but sometimes an IOS update breaks compatibility.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Need help using LR with a 2nd Computer/Laptop

I just installed LR on to my laptop last night. I currently have all my photos saved to my desktop in e:\photos. I belived the sidecars are in that same folder, and the other stuff is in the default c:\docandsettings (or whatever it is).
The laptop is on a wireless network and my desktop's e: drive is accessible.
So last night I wanted to try lightroom on the laptop with the files I have on my desktop. Am I correct in that what I need to do is import files from current location so that I'll only have one version of the photos? If I make changes on the laptop, will the sidecar be changed so I'll see the change when I use the desktop? Or is there a different/better way to do this?
The other thing I want to do is be able to teather my camera (Canon 30D) to the laptop and shoot that way. I was able to do it using Canon's DPP and EOS Utilities software where the photo is writen directly to the hard drive. But when I plug my camera in, Lightroom opens as well. Is there a way to shoot directly into Lightroom? Or shoot to the card so LR opens the file from the camera without having to do a separate import?

Yes it will delete everything.
I'm a little confused at what you are asking at the end.
Does this help at all...
Using iPod With Multiple Computers
Or do you want to move everything to the new computer?
Use Your iPod To Move Songs To A New Computer
How to copy music between authorized computers
btabz

Bluetooth Firmware Update 2.0 is stopped with no progress in sight

Hi,
I am trying to install Bluetooth Firmware Update 2.0 on my 15" MBP with OS X Leopard 10.5.7 but it has stopped with no progress at all. Is this a known issue? What should I do to fix this problem?
Thanks in advance,
Behrang

Fixed...

What is the bottom line-does new firmware allow us to use TM with Airdisk?

Just as the topic reads - does the newly released firmware allow us to use an external HD connected to Airport Extreme for Time Machine?
All of the Mac sites seem to report that it does - does it?
Gregg

It certainly seems to be supported using an AirDisk connected to my 1TB TC. I do have an AEBS but haven't tried it on that yet.

Need to use hyperlink with tracking code in Edge project, not working

I have been using test URL's inserted on invisible "hot spot" elements in my edge animate project that have been opening fine in the browser. Now I need to update those URLs with tracking syntax, but when I change it in Edge (replace the URL in the actions panel for that element) and then run the animation in the browser, the link will not open.
Any thoughts or suggestions?

Never mind, the URL itself had quotation marks that needed to be removed; once that was done the URL's opened properly.

What additional software requirements are needed when using Captivate with RoboHelp?

Hello,
I use RoboHelp HTML 6 & 8 for developing online manuals for our government business. We are currently exploring eLearning options for our training needs, and I am considering the idea of implementing Captivate features (PP slides, simulations, animations) directly into the manuals. We would not need the collaborative/review aspects of Captivate, so I believe we wouldn't need to purchase Adobe Air additionally. However, would anyone be willing to give me the lowdown on what additional software either I would need as a developer, or end-users would need (Adobe Flash, I assume) if we decided on Captivate? Would we need addtional software (Connect Pro/ LMS) to publish the Captivate content?
I have conducted an extensive online search and explored the forum threads with some success, but there is a lot of convoluted information out there!
Thanks in advance for your help!!

Hi there
Speaking as one who regularly combines Captivate and RoboHelp...
Unless you really want some functionality that Captivate alone simply does not provide, you really shouldn't need any additional software whatsoever. You record the eLearning bits in Captivate, then you use that content in your RoboHelp projects.
Are you seeking to host things in a Learning Management System (LMS)? If so, you probably should abandon the thought of RoboHelp, as it serves a bit of the functionality the LMS would provide.
Note that AIR is a functionality similar to the Flash Player or the PDF Reader. It is free for the taking by the end user. There is nothing one would need to purchase. Now if you want to *AUTHOR* something in AIR, that's a different story. RoboHelp HTML version 8 will produce an AIRHelp output. But it sounds to me that you may be somewhat unfamiliar with what AIR gives you. So here's the skinny.
If you were to produce AIRHelp output from RoboHelp, you end up with a .AIR file that each of your end users must *INSTALL* just as they would have to install an application. That's just to view the help. Prior to installing your AIR output, they would also need to first *INSTALL* the AIR viewer. So if they had no AIR capability whatsoever, they would need to perform two different installs. One of the AIR runtime, and a second of your AIR output. Additionally, creating the AIR output will also require a digital certificate. Now RoboHelp will allow you to create one, but it's an untrusted certificate and the end user will be forced to acknowledge whether they wish to continue installing with an untrusted certificate.
Anyhoo, hopefully that helps you with at least some of what you were looking for.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Apple TV 2 has big problems homesharing - fixes? firmware update needed!

After 5 days of having ATV2, (which is lovely when its working) I'm still having problems narrowed down to Homeshare access from ATV2 to my macbook running the latest itunes.
I've just moved house and got a new broadband router and provider the same day as the ATV2, so it has taken a while to make sure it was not the router (BT home Hub 2), the connection, or my macbook itself.
Macbook - (Running Snow Leopard) Internet working fine with router and broadband, (have removed all network settings, removed passwords in keychain and repaired permissions, restarted and re-entered network info - just incase).
Router - works fine all day, with macbook and dell laptop, Have tried restarting a lot just incase
Apple TV 2 - works fine with broadband and router, and I can browse the online selection of videos, youtube etc fine.
Homeshare - When I connect ATV2 using homeshare to my macbooks itunes account, it works for a maximum of 2 minutes then loses connection. And my macbook which still shows full wifi signal can no longer get the internet, and forgets the wifi password and says its wrong when I re-enter it. Only fix is to restart router and delete network settings on macbook and re-enter them.
So is this homeshare technology screwing up, Apple TV 2 screwing up, or my router jumping in after a couple of minutes and saying NO!.
Is anyone else experiencing exactly the same as me?
Its a shame that the only thing I've found left to try (after searching alot of forums) is when turning on 'Homeshare in Itunes' don't press the 'DONE' button. Will give that a try tonight.

Thanks for the reply.
Ok, got home and finally after cooking, bathing and putting our 9 month old daughter to bed I got to play around with the Apple TV 2 problem.
I'm pleased to say the 'not' pressing the 'DONE' button seems to be working, it is keeping the Homeshare connection live, and has done for the past 2 hours. Far better than my previous 2 minute record.
The connection was however very very very very very slow (like 30 seconds to load one video thumbnail), and made the internet very slow on my laptop and on the apple tv. But after now changing my BT home Hub wireless channel to 7, it seems to be working a lot better. If it drops again I will try the other available channels. Worth noting that as soon as homeshare is going the apple tv must start emitting another frequency that was screwing with my router. I've also left my laptop with a static IP, (again may change back if needs be).
This is by no means the end of the problem as having to open itunes and not press 'DONE' doesn't seem very cool and I'm sure Steve Jobs will be quite annoyed that his lovely new Apple tv is a little bit crap.
We shall see if it is still working tomorrow morning, I'll leave it all on and see if it stays connected all night.
Unfortunately my wife is now watching normal crappy TV and will have to wait for her to go to bed to test the connection a bit more thoroughly....Avater in 720P over homeshare is waiting!!! and has been for 5 days!!!

I REALLY need to use MB with lid closed...

Sleepless doesn't work after the upgrade, does anyone know of ANYTHING that will work right with this new update? I'm not using external keyboard/mouse btw.. thanks!!

Are you trying this when the Mac is in motion, i.e., in your backpack? If you move the machine much when it is awake, you risk killing your harddrive. If you are trying this with the Macbook on a desk, just leave it open.
Leaving laptops (eps. Macs) on and closed keeps heat from espcaping the way it is supposed to, possibly damaging your system. Apple designed their machines to sleep when shut for a reason.
Just go buy a Nano.
iSMH

Firmware Update needed to use DDM with DP 1.2

Similar Messages

Maybe you are looking for