Firmware update on Vista-MuVo N

How can I update the firmware on a?-MuVo N200 in Vista?

Before you open PC Suite, right-click the icon and select Properties, now select the Compatibility TAB and in the Compatibility Mode 'Run tis program in compatibility mode for: Windows XP'
gerrymoth
http://nokiAAddict.com
Using E71, N97 & 5800 XM on O2 Simplicity

Similar Messages

Apple Wireless Keyboad (A1255) - Firmware update in Vista?

How do I go about updating the firmware of the Wireless keyboard in Vista to the latest version? Is this just done automatically by the Apple Software Update?

Yeah i think were all having the same issue after that Firmware update.
Surely if we can revert to an older firmware, we can get the wireless back. It still means i have to print one page at a time from OSX and sometimes reboot the printer - but thats better than not being able to print at all hey.
The new firmware is on their FTP under this link:
ftp://ftp.hp.com/pub/softlib/software12/COL22689/bi-59777-2/HP1022_FW_Upgrade_Security_20120928.exe
Ive had a quick look on the FTP using a client hoping i could find older firmware.
Does anyone have the name of the older firmware that worked, i think i can use filezilla to search the FTP?
Really dont want to set it up shared on my mac or get rid of it - come on HP, sort this out.
Thanks for youe time guys.
Warren

Zen Micro needs firmware update for Vista, but what now as it fail

As I now use Vista (paid for by my work) I came to install my Zen Micro which wasn't recognised so I came to the website and discovered that you need version 2 of the firmware for it to be compatible with Vista. Having never had the need to upgrade before I was still on Version one so I downloaded it onto my other WinXP machine?which I've used my Zen on alot before to do the upgrade. Started the upgrade and all seemed to be well until a point a 3rd of the way through a box came up asking what I'd like to do with the device (like the one when a USB key inserted). Leaving the upgrade I returned hour later to see nothing has changed and the upgrade has failed.
I've tried all the options with recovery mode but it still just shows up as having version 0.0.65 and when inserted into a PC shows up as a?Creative Zen Micro?in device manage and has a 20MB disk partition for storage but when I try and run a firmware patch it says its not connected.
Looking round this forum this seems to be quite common upto now but with the release of Vista people are forced to take the 'risk' of running a firmware update that when it fails doesn't seem to be recoverable even in recovery mode. Please can you look into updating the firmware to find these devices that it can't see, for many years I've laughed at my friends with their crashing ipods that need charging everyday due to not being able to change the battery but it now seems the jokes on me.

I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

Firmware wishlist for the MuVo Sport C

I would like to start a thread to discuss the suggestions for firmware update for the MuVo Sport C00. FYI, I am running firmware version .0.0. Please post your comments or ideas to my suggestions, or reply with your own comments.
Before I begin, I'd like to say that I think the C00 is an awesome sports player, but it could definitely be improved. My Fiance has the Rio Cali 256, which is also a good sports player. Right now I think it's a toss up between the Cali and C00, but I think the C00 has the potential to outshine the Cali. (I like the Cali's separate volume controls, but I dislike how it falls out of the armband.)
Here are my suggestions in my order of importance:
[urgent] Fix the stopwatch so that the user can change tracks while the stopwatch is running. You should be able to press "Menu' and toggle between stopwatch and music modes while the stopwatch is running.</LI>
[urgent] Fix shuffle mode so that it truly shuffles playback from internal and external memory. Right now it appears to select songs from internal memory 90% of the time. Also, I don't think the player has ever selected anything over the 200th song on the player for shuffle playback at the root level.</LI>
Provide the ability to select a specific song for playback from the Menu. Right now, you can only select the folder for playback and then navigate to a specific song from there.</LI>
Reorder the Menu icons, and place "Folder", "Stopwatch", "Music" and "Play Mode" next to each other. This would allow for easier and faster navigation while running.</LI>
That's all I can think of now. Does anyone know how to submit these to Creative's dev team so they can consider them for a future firmware update?
Message Edited by sixseven on 05--2005 02:50 AM

Definitely, point one in the list is the most urgent one (making player functions accessible without having to stop the stopwatch). This ridiculous flaw leads to the situation that from day one after buying the device it rests unused in my drawer. I do not agree that there is no marketing for this device. Actually, I bought this thing for 20 Euro after I read in an ad that this was the ideal mp3 player for sports. Maybe for 00m runners this is right (you barely change a music track during the2 seconds). But for any distance above 000m it is just laughable.
I wish there would not have been marketing at the time when I searched for a sports-mp3 player. I wouldn't have fallen into the trap to buy this crap. And that Creative is not able to provide a firmware upgrade which corrects this bug for about .5 years now is enought reason for me to make a BIG detour whenever I see a Creative product on a shelf.
Axel

MuVo "device not connected" firmware update error

When I try to execute the plan given by Pook Kok Choy (below between "=====")
I successfully get MUVO_DRV_LB_00_04_250.exe installed.
When I move to step 2 I have the device attached to the PC but I get the message "device not connected to the USB port".
This happens, with the device connected and on while trying to install:
MUVOAudible_PCFW__40_2_L4.exe
Apparently, I am not alone in having this problem.
Apparently, this happens to others - using XP - specifically when trying to do this firmware upgrade in order to play purchased WMA, DRM protected music.
The PC recognizes the MuVo 28.
It assigns it a dri've letter when it is plugged in.
The install procedure for the *Audible* firmware does not see it.
Please help.
Tbanks,

JLRtist,
After you have installed the latest downloaded driver, did you run the player into recovery mode? Try this,press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file.
Jason

Formated Muvo NX before firmware update, help plea

For some time ago, I formated my MuVo NX 28mb player by mistake. This caused the player the firmware to go "blank", the player would not start at all. I tried to download the firmware update, but it couldn't see the difference between my mp3 player, and a normal memory stick. Anyone have any ideas that can solve this problem?
Oh, and I apologize for bad english, as it is not my nati've language.

Is there a Recovery Mode for your player? See the sticky post at the top of the page.
PB

Firmware update with muvo tx 128mb ..solved

hi all
today i have tried to update my muvo firmware with win 98 se
i have installed drivers MuVoTX_DRV_LB__00_05_250 but unfortunately tool for update (MuVoTX_PCFW_LB__0_05.exe)dont recognize any device
then i have tried usb 2.0 drivers (MuVoUSB2_PCFW_LB__20_03.exe)
and Creative MuVo USB2.0 firmware update .20.03...
i hold the power button on muvo and keep it pressed. Then plug the player to the usb-port of the computer and keep the button pressed for at least 5 seconds.
this time installer recognize muvo and i am able to flash it, unfortunately muvo with firmware .20.03 dont works anymore as mp3 player
solution: i have extracted files from firmware .0.05 and copied them in directory where i have muvo updater bundled with firmware .20.03.
this time all works and i have my muvo updated... 

i hope this can be helpful, sorry for bad english



ah. the file you linked twice to is for this: http://www.creative.com/products/product.asp?category=23&subcategory=25&product=099 a completly different product than the MuVoTX 28MB (which for some reason is listed as a separate product from the other MuVo TX (28/256/52) versions...), that's why you were having the problems.
good to know you got your muvo working again though. Message Edited by batkinson00 on 02-24-2005 0:26 PM

Muvo TX 256MB usb2.0 Firmware update XP Mode

,Hi,
I tried to update my old muvo tx a couple of weeks ago under XP Mode Win7. It said everything would be fine at the end but since that time my player is dead. I tried now the deinstall of wmp but that should have been fixed long timeago and then used the recovery tool. Even with that it doesn't work. It's judt dead. Win XP doesn't recognize it as well. Any tips what I could do? I need the micorphone option for use.
Regards
Matthias

See this thread. PB

New Zen 8GB crashed during firmware update; now I can't get it to reboot or connect to a compu

I went and exchanged my "problematic white screen" ZEN 8GB for a new one this evening. When I came home, I attached the new unit to my computer and started to perform the required firmware upgrades. The upgrades downloaded fine, but after the installation started, they seemed to freeze. I waited for an hour before I did anything, but finally had to assume that the update had malfunctioned and would never finish on its own. At that point I clicked "cancel" in the window monitoring the upgrade installation, and thought I could just start the process anew. Unfortunately, my computer no longer recognizes the ZEN when it's plugged into a USB port.
I rebooted my computer, just in case that was the problem, but it still can't find the ZEN when searching for devices to AutoUpdate. As for the Zen itself, I can turn it on and off, but the screen remains black (i.e., no info on screen). If I reset it, the screen flashes the word "Creative" only. If I try to do a Recovery, I can't get any text to appear on the screen. I can't even reformat the ZEN via my computer because they're no longer speaking. I assume that the interrupted firmware installation caused this problem, and that the ZEN just doesn't have enough of an operating system installed to work properly. Is there any fix for this that I can tackle myself Or, is it back to the store to return this one, too I have noticed a lot of white screen flashings as I've been working with the new ZEN, so perhaps this just wasn't meant to be. Any words of advice are certainly appreciated, however.

Same happened to me and I only had the thing a few hours. I may leave it connected overnight to see if the battery needs charging but if nothing happens it's going back. I've tried plenty of suggestions. The Creative screen flashes on when I plug it in but then just sits there. Reseting does nothing and how can you do anything to it if it's not recognised by the PC. Vista did see it before the update attempt. Wondered whether to throw XP back on.
Do I have to resort to the new ipod Nano
OK I've done it. Somewhere on this forum it said to disconnect the Zen from the PC.
Now at the same time, press and hold the play/pause button, put a pin into the reset button and hold down the on/off switch (yes all 3 in that order at the same time). Recovery mode came on and I tried to uninstall the firmware update from previously - it didn't do it but I updated the latest firmware again anyway and this time it worked. I guess the last attempt didn't take.
Message Edited by nimble on 2-06-200709:34 PM

ZEN Style M300 Firmware Update Ver 1.00.16

ZEN Style M300 Firmware Update Ver .00.6
Filesize : 3.72 MB
Release date : Aug
This download contains an improved version of the firmware found on your Creative ZEN Style M300 player. It improves the overall stability and Bluetooth user experience. For more details, read the rest of this Web release note.
What's New:
Now supports playlists created by Windows Media Player and WinAMP in *.m3u format.
Improves stability of player when it's paired and streaming music via Bluetooth.
Allows Bluetooth streaming of Audiobooks.
Now supports 4-digit pairing code entry for compatible Bluetooth multimedia devices or Bluetooth car stereo decks
Bluetooth will be turned ON automatically upon restart when it is detected that it was ON prior to shutdown
Requirements:
Microsoft Windows 7, Windows Vista, Windows XP Service Pack 2 or later
USB port
Creative ZEN Style M300 player
Note:
Due to changes in this new firmware, the firmware update utility may not detect previous firmware versions correctly (example: 0.0.000). Please do not be alarmed by this and continue with the firmware installation.
To install this firmware, do the following:
. Download the ZENFWUpdater_M300_v.00.6.exe file to your computer's local hard disk.
2. Close all application windows that are currently running on your computer.
3. Connect your player to your computer.
4. Back-up your player's content before proceeding with this firmware update.
5. Double-click the downloaded file and follow the instructions on the screen.

The M300 not remembering previous Bluetooth state, on and streaming after power down, was inconvienient. Happy to have found?a firmware update addressing this issue.
Updater reports my current firmware at 0.00.000 and that it would take it to .00.6.
Following update,?the updater reports that the "update failed".
The update does in fact appear to have been successful. System > Information reports the firmware as being .00.6 and powering on the device now reinstates Bluetooth conectivity.

Airport extreme firmware update screwed up my IP sharing and internet

I am having all the same problems -
1) I upgraded to the 7.1 firmware
2) I got the 'double NAT' error, but no problems connecting to the internet
3) When I turned the bridge mode to off, I lost my internet, so I
4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
(If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
Now I'm afraid to touch anything!!

kayek wrote:
I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
{quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
1. Open AirPort Utility.
2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
3. Select the specific firmware version you require.
4. Click Download.
5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
6. Choose Base Station > Upload Firmware.
7. Select a firmware version and click OK.{/quote}

A suggestion for next 5800XM firmware update

I hear all the time people wants widgets on their homescreen. i'm not sure if this the waht i really miss there.
instead i will be much more happy if i could have the contact bar above (and more than 4 contacts, at least 6-7 which we could roll left/right), and under this bar should be the application bar (and again, more than 4, which we could roll).
under both should be the google search (which is great), and the tasks/notes, which is my most important feature on the phone.
and how it all should work?
i want to see a full desktop when i start my phone, and when i choose my contact the other tasks/apps dissappear from the screen (or being transparent).
i don't understand why i have to choose between contacts and apps, and most of the time they both don't take advantage 5800's hugh screen (by leaving large spaces unused).
but if we could see a Facebook widget or a normal weather widget on the next firmware update, it could be nice (but less necessary) ...
good luck!
Lior R.

that is a nice idea you have there, but one must think about how practical all these changes and additions will be. if one must have, lets say 6 contact icons next to each other in one row, the icons would have to be small in order for them to fit in nicely. i do notice that the way you have imagined the new home screen is much like the old S60 3rd edition, but do note that the 3rd edition was not touch screen. there are many people who wish different things for certain handsets, mine would be that the 5800XM should have a more windows vista feel to it, with option lists and screen appearing and dissapearing into the screen as though it was another layer on top of the previous page.
you must also remember that the S60 5th edition on the 5800XM is the a new version of the software, being added on the first Nokia touchscreen smart phone, so there are still many things Nokia has to learn from the 5800XM "test" phone.
hopefully our ideas will be seen in the new future.
Kind regards,
Memphis

Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update

Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: Panajev

Hi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom

Trying to restore iPhone 4s, and receive "Connection attempt to firmware update server was unsuccessful. The network connection timed out."

I've tried updating on both my desktop and laptop, neither work. I have the newest version of iTunes as well, so that can't be the problem. When I run diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion g7 Notebook PC
iTunes 11.3.1.2
QuickTime not available
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038BB880CE6FDE0
Current user is not an administrator.
The current local date and time is 2014-09-04 12:48:09.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
Plug-in Name: Last.fm AudioScrobbler
Plug-in Loaded: Yes
Plug-in Version: 4.0.5
Plug-in File Version: 6.0.5.4
Plug-in Path: C:\Program Files (x86)\iTunes\Plug-ins\itw_scrobbler.dll
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {CE989488-FC81-488B-A970-91D722749820}
Description: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Thu Sep 04 12:18:22 2014
Lease Expires: Fri Feb 25 02:18:22 2022
DNS Servers: 192.168.254.254
Adapter Name: {5E3757D2-481F-4D48-B535-A6A6ACF48517}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 17:00:00 1969
Lease Expires: Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-09-04 12:47:39

Hi christeag,
The only thing I can identify as an issue is that your Windows Firewall is running and iTunes is not enabled in it, so this may be the source of your issue. Here is an article for you that will help you rectify this situation:
How to enable iTunes in Windows Vista, Windows 7, and Windows 8 firewall
http://support.apple.com/kb/HT2553
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Disk Image for Firmware Update Utility for LaserJet p2055dn is corrupted

Yep. Not sure what happened with that one. I have submitted the issue to the software team. Hopefully I can get a copy that works out to you soon. Apologies for the inconvenience.

Update to my previous post: HP confirms that their Firmware Update Utility is broken, but there is another way to update the firmware on a LaserJet P2055dn using a Mac running OS X, and here it is. HP tech support walked me through this procedure and it worked for me: Getting the printer ready: ensure that the LaserJet P2055dn is connected to your computer and make it the default printer. In System Preferences / Printers and Scanners, find your HP LaserJet P2055dn, select it, Click “Open Print Queue” and on the Printer menu, choose “Make Default.” On that same menu, choose “Print Test Page” and verify that the page prints.Using your Web browser, go to the following page on the HP website and click the “Download” button. Don’t worry that the page says it’s for Windows Vista. The file you’re about to download is for your HP LaserJet printer and doesn’t care what kind of computer you use to install it. Here’s the link:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ja-143142-1#tab1
When it finishes downloading, go to your downloads folder and find the file HP_LaserJet_P2055dn_20141201_build155964.rfu
(note: you'll probably get a “Preparing for HP separation” message;. Just click OK)In your Applications/Utilities folder, find Terminal, and open it. In the Terminal window, type lp (space) but don’t press “return” yet. Drag and drop the above file from your finder window into the Terminal window. Then press “return”Watch the LCD display on your printer. It should go through several steps, beginning with “erasing” and finally saying “ready.”Go back to the printer’s “Print Queue” window and print another test page. If the test page prints properly, congratulations. You've done it!

Firmware update on Vista-MuVo N

Similar Messages

Maybe you are looking for