Firmware update problem for N73

i have big problem with nokia software updater. Nokia pc suite is working fine, but nokia sw updater can't see my phone? Why???
I forget to inform you that my phone is nokia N73, firmware is V4.0726.2.0.1, and i'm from Romania!

go to control panel.....add or remove programs....then on nokia connectivity calbe driver clik repair

Similar Messages

Firmware update problem for Nokia 7373

Just updated to firmware v5.0 for my Nokia 7373 and everything seem to work fine except when I go access my 'GOTO' menu. Then it crashes my phone ( well it's freezes my phone up).
I go through the update as required with the Software update - even tried reinstalling it and still gets the same result.
Can anyone help me out either revert back to the old firmware or fix the problem?
Thanks
(P.S. I would take it to a repair center except I bought the phone in China and I live in Canada and I don't think the phone is officially out yet in Canada)

go to control panel.....add or remove programs....then on nokia connectivity calbe driver clik repair

Firmware update problem solved after Win XP SP3 -upd

I'm one of the numerous victims of ZEN firmware updating problem. At the start I had Win XP SP2 and WMP. My player is ZEN Micro 5gb and after trying to update firmware it had firmware problem and stayed in the recovery mode. Firmware updater and ZEN Media Explorer couldn't recognize the player. So that's how I got it work again:
1. Rolled back WMP to WMP9, updated it to WMP0.
2. Removed ZEN Media Explorer and Jukebox driver (all Creative stuff) from Add/Remove programs in Control Panel.
It didn't solve the problem. I also tried my player with couple of other computers, but it didn't help either.
3. Installed Win XP SP3 -update.
4. Reinstalled driver for ZEN Micro in Control Panel.
5. Ran the firmware updater and this time it did recognize the player.
(6. Updated WMP back to version and the player's still working.)
Hope this will help you too.

I can start the upgrading process, but at around 95% it stops, and says "firmware upgrade failed." I didn't uninstall WMP though, because I have Vista, and I hae no idea how to do it. I can only get my computer to recognize my 6G Zen when I go into recovery mode and choose 'reload firmware' then I connect it to the computer and I can start trying to upgrade it. If I dont go into recovery mode, its just a blank screen, the computer doesnt recognize it, and I can't even turn it off without reseting.
?I've tried so much, now when I try to upgrade, it loads a little bit and jumos to the end quckly and says "firmware upgrade fails" and nothing works. Do I have to try to do all the things you listed to fix this?

Xcode and firmware update problem

Hi all,
i've been working on my app for a few month now and i have about two more weeks until i finally submit it. everything went very good during development.. untill -
by ACCIDENT i've upgraded my firmware to 3.1.2
since my OS is 10.5.7, as i understand, i must install xcode 3.2.1. but this version also needs mac OS 10.6
so it's realy frustrating for me...
do i need now to upgrade/purchase OS 10.6 and also my xcode environment in order to continue working ?
can't i make a rollback to other firmware version supported by my current 3.1.2 xcode ?
i've searched the net endlessly and just couldn't find anyway to downgrade my firmware (i have a 5.11.7 baseband and 6.2 bootloader)
please...
any help ?

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Zen 8G This device cannot start code 10 and firmware update problem

I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Still no firmware update available for E71 RM-346

Hi,
According to Nokia (http://europe.nokia.com/A4577225), there should be a firmware update available for the E71 (update from version 100.07.76 to 110.07.127.
I checked my product code (0569803) on http://europe.nokia.com/A4577224 "Can I update my Nokia device software?" and it tells me, that there is no update available:
"Latest available software for Nokia E71, product code 0569803
Version: 100.07.76" (> same firmware version which I currently have on my phone.)
Does anybody know, when there will be a firmware update available for the E71 with product code 0569803?
Thanks!
E71-1
0569803
RM-346
unbranded version!
Solved!
Go to Solution.

I have an e71-1 (RM-346) and to this day i still cannot get an update. the phone freezes on mid answer and yet i still cannot fix it the phone came with firmware 200.21.118 and the nokia site says they are aup update 300.21.114 and other telling me they ave version 400.00.00 on theirs

Firmware update available for 6230?

Hi,
new to this so sorry if its all been said before.
I have a 6230 that I am loathe to get rid of, its a good phone, I wondered if there was a firmware update available for my current phone and how much Nokia charge for updating it as it is out of warranty.
Any help/advice would be most appreciated.
Current Nokia software version:
V 05.24
25-11-04
RH-12
GSM P1.1
C

The issues with the 6233 in a carkit are well publicised within these forums, I'll just give you a brief rundown.
No 'lights on always' option, some say this is because of some EU directive, however it is rumoured that the 6233 is prone to screen burn. Either way it's a downright danger at night because your eyes down have time to adjust to the brightness when someone calls you or if you chose to make a call.
You cannot record your own voicetags, an automatic voicetag system is in place for all contacts meaning for example instead of recording your own tag for the contact 'John A Mobile' as 'John', you'll have to say 'John A Mobile' and hope the 6233 understands you and doesn't either give you a list or pick the wrong contact altogether.
Key 2 is now reserved for the video mailbox, so you cannot assign it as a speed dial key.
Ring/Alert tones set at level 5 (maximum) do not ringout at full blast at first, they ascend. Not really an issue with a carkit, just annoys me as I can barely hear the SMS tone.
Apart from all the above, I find the 6233 really good for texting and as a 3g bluetooth modem.
If I had the choice again I'd either stick with the 6230 or put the money towards an offline 6230i for the slightly larger screen and because you don't have to change the cradle.
First use the search to see if your question has already been answered...
Secondly I will not knowingly assist in breaking the forum rules.
My information is always changing, what I post at the time is usually true.

10.6.8 Macbook Pro firmware update problem

I installed a couple of updates for my MBP 10.6.8. One was Safari, the other was brand new, released within the last week, I think it was a firmware update, and now the machine will not boot into OSX. I have a Bootcamp Windows 7 partition that starts fine. But if I let it boot, or select the Mac partition, it shows the apple logo, then a little progress bar below it that gets to maybe 5-10%, then starts over, then the computer powers down.
I have tried clearing the flash by holding option+command+P+S. Didnt work.
Is there a way I can boot to a command prompt and clear this update out or something? Or anyway to fix this myself? From the Windows partition maybe?

So...fixed my issue and it was not related to the updates, it was just coincidence.
What I finally did was take a video of the startup screen and was able to see that what was happening was fsck was failing, and then the system just halted. This info presumably makes it to dmesg, but not to system.log (huge oversight IMO). So its not easily discerned.
Once I figured that out I googled around and this guy's page helped me fix the problem:
http://blog.jbheren.com/post/2011/02/09/repair-hfs-volume-on-osx
Specifically I had to boot into single user (command+S at the startup sound)
and issue:
fsck_hfs -ypr /dev/rdisk0s2
Then I did
reboot
and here we are

Firmware updates unavailable for most product code...

Hi,
it's over a month now that Nokia has released the latest 40.x.x firmware for its 5800 model, or should I say to a small, privilleged amount of customers? I have purchased a Nokia 5800 via Amazon.de, totally unbranded, product code is 0578314, and up to now, the new firmware is unavailable. Why does it take so long for the firmware to become available at least for the unbranded country versions? Technically, there seems to be no problem at all, since many users simply change their product code and install the new firmware, but I am asking here for an official way to get the new firmware in time. The massive delay in firmware updates for different product codes is simply a pain for us paying customers who want the latest features available.

[quote]
Actually, Nokia already is using a similar system. If your phone is unbranded, you still have to consider if its a Regional or Country Variant (similar to the SE phones, and the China versions I stated above). There are basically two types of unbranded handsets: regional generic and country variants.
[/quote]
This fact is not clearly obvious when you buy a phone, so how does a customer know if he gets a CV (copuntry variant) or any other type of phone before buying? When I bought my unbranded 5800XM, I was still thinking that I get a perfect, free phone, and that firmwareupdates can be applied when available. It was absolutely not apparent to me that I would have to wait three months or so, before I can upgrade my phone to a new firmware, once it becomes available

Nokia 3120 classic firmware update problem

Hello!
I tried updating my Nokia 3120 Classic with Nokia Software Updater, and I I've got some problems. When I connect my phone to the computer Software Updater detects it, and everything seems to be OK, but when i want to install the update (or as in this case re-instal it, beacause I've got the newest firmware version) the program returns errors.
The 'download' step is OK, Software Updater downloads the updates, and when it comes to installing after few seconds I get "update failed, to have the best connection connect your phone to the PC without USB hub..." (i've got polish version of software updater, so that's how I translate it into english).
The thing is, that I've got the best connection! The device is connected to computer via CA-101D cable! I don't know what is wrong, I used to update my Nokia N95, Nokia N82 and second N95, and everythink worked great, but then the new version of Nokia Software Updater appeared, and I can't update this old 3120 : /
I need to update it, help me!
(sorry for my english, I'm from Poland )

Hi scarlet_213, download Nokia Ovi Suite and install it to your computer. Then follow the steps and upgrade your phone. If there is no update available for your phone, this could be due to a number of factors which are outlined in the following articles written by one of our senior users Grischnon: http://techyoddsandends.blogspot.com/ and http://linux.sgms-centre.com/nokiafaq/branded-phones/
The latest firmware version for unbranded handsets for the 3120 Classic is 10.00. Let us know how it goes.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Firmware update problem ?

Help !!!!!!
We purchased an eMac about a year ago and just recently decided to upgrade the old 400mhz G3 iMac to OS X 10.2.8, so my wife could use it as a stand alone for design stuff. Problem is that stupid me forgot to upgrade 9.0.4 to 9.1 and do the firmware update. Now we have a machine that won't recognize music CD's at all. I removed 9.0.4 when I installed OS X, because I didn't think we'd need it, now I can't reinstall it.
Questions:
1) Do I have to completely wipe the hard drive and start from scratch ? Install 9.0.4, upgrade to 9.1 or 9.2, perform firmware update, install OS X, updrade to OS X 2, update to OS X 10.2.8 ?
2) If so, how in the name of all that's sainted do I do it ? How do you format the HD to start again ? Can I save the design programs on there, or do I have to do them again ?
3) Is there no firmware update that can just be used with OS X 10.2.8 ?
Many thanks for any help you can give a technophobic ignoramous
Cheers,
Bryn
iMac G3 400Mhz

1. Only if you erased the hard disk from the Disk Utility without installing the Mac OS 9 drivers. Otherwise, proceed as follows:
1. Insert your iMac's Mac OS 9 installer CD into the drive and restart with the C key held down.
2. Open the folder System:Library:CoreServices on your hard disk and drag the item named System to the desktop.
3. Start installing Mac OS 9.
4. Use the Startup Disk control panel on the CD to set the Mac OS 9 system on the hard disk as the startup disk.
5. Restart your computer, download and run the 9.1 update, restart again, and update the firmware.
6. Select the item named System on the desktop and choose Put Away from the File menu.
7. Download this control panel to your machine and use that to select your Mac OS X system as the startup disk.
(16157)

Post-Firmware Update Problems--HELP

Several weeks ago I downloaded the Firmware update for my MBP. My MBP had an intermittent history of going to sleep and not waking up. When I ran the update, my MBP crashed and would not reboot. I had to obtain a copy of an original firmware disk from my local Apple dealer and load that in order to get my computer to operate.
Thereafter, using "original" firmware, my MBP had a regular problem with unexpected shut downs. I just got around to re-downloading and installing the recommended firmware update, and I am experiencing the unexpected quits again! Quits occur without regard to battery charge level. Since the update the quits happen within a couple of minutes of use. Before update the quits would happen later than the first couple of minutes of use. These unexpected quits are tethering me to an outlet and making me crazy.
1. Was the firmware update suppose to correct my original problem (not waking from sleep occassionally)?
2. Was the firmware update suppose to correct my new problem (unexpected quits)? If so, why didn't it?
3. Is it possible that the crash several weeks ago caused another software problem that is causing confusion regarding power availability?

I sent my computer in last week with that same problem, and another case issue. They repaired the case and replaced some sensors.
But when I called Apple because I was STILL having unexpected Quits when I got it back, they said the Apple Care technician couldn't duplicate the Quits.
Does anyone think this is a power supply issue? Because when I plugged it in and started it up, it seemed to be okay. Or is it a motherboard issue? It seems to be working now that I've run disk utility from the install cd, and since I've plugged it in. Should I send it back in?
-Amy
MacBook Pro 17" Mac OS X (10.4.8)

Disk Image for Firmware Update Utility for LaserJet p2055dn is corrupted

Yep. Not sure what happened with that one. I have submitted the issue to the software team. Hopefully I can get a copy that works out to you soon. Apologies for the inconvenience.

Update to my previous post: HP confirms that their Firmware Update Utility is broken, but there is another way to update the firmware on a LaserJet P2055dn using a Mac running OS X, and here it is. HP tech support walked me through this procedure and it worked for me: Getting the printer ready: ensure that the LaserJet P2055dn is connected to your computer and make it the default printer. In System Preferences / Printers and Scanners, find your HP LaserJet P2055dn, select it, Click “Open Print Queue” and on the Printer menu, choose “Make Default.” On that same menu, choose “Print Test Page” and verify that the page prints.Using your Web browser, go to the following page on the HP website and click the “Download” button. Don’t worry that the page says it’s for Windows Vista. The file you’re about to download is for your HP LaserJet printer and doesn’t care what kind of computer you use to install it. Here’s the link:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ja-143142-1#tab1
When it finishes downloading, go to your downloads folder and find the file HP_LaserJet_P2055dn_20141201_build155964.rfu
(note: you'll probably get a “Preparing for HP separation” message;. Just click OK)In your Applications/Utilities folder, find Terminal, and open it. In the Terminal window, type lp (space) but don’t press “return” yet. Drag and drop the above file from your finder window into the Terminal window. Then press “return”Watch the LCD display on your printer. It should go through several steps, beginning with “erasing” and finally saying “ready.”Go back to the printer’s “Print Queue” window and print another test page. If the test page prints properly, congratulations. You've done it!

Firmware update problem-- my macbook pro will not start

I think I took my finger off the power button and then put another finger down which turned my macbook pro off when I was installing some kind of firmware update... all I get now is a blank screen but the power button is on and it "feels" like something is going on inside but nothing... can some help? Thanks

I did explain how long to hold down the 'C' key in a previous post. Anyway, you should hold it down until you see the start up screen.
You could have a dirty or even a bad install DVD. If you could try it in another machine that would let you rule that out as a suspect. It's also possible that your DVD drive is damaged or bad. At this point it sounds like a trip to an Apple Store is in order.
Good Luck!! And please post back with your outcome, it might help someone in the same situation.
Edit: Did a little more checking around and found that this may be a common problem as in this other post...
http://discussions.apple.com/thread.jspa?threadID=963645&tstart=330
Could also be related to this...
http://www.retrodata.co.uk/noticeapple_seagatedrives.php
Either way, like I said above it sounds like a service call is in order.
Again, Good Luck!

Samsung Printer Firmware update information for iOS8 AirPrint compatibility issue

It has been noticed that there is a compatibility issues on some of the Samsung network printers while printing from iOS8 devices using AirPrint.
In order to resolve this compatibility issue with iOS8, new firmware for printer has been released.
Issue Case:
Printing using AirPrint from iPhone or iPad running Apple iOS 8.0 or later.
- Devices running version prior to iOS 8.0 or Mac OS X have no issues.
Details about affected printers and their fixed firmware versions.
Printers
Version with issue fixed
Samsung CLX-3300 Series
3.00.02.13 or later
Samsung C460 Series
3.00.02.13 or later
Samsung C470 Series
3.00.02.14 or later
Samsung M2020 Series
3.00.01.11 or later
Samsung M2070 Series
3.00.01.20 or later
Samsung M262x 282x Series
3.00.01.25 or later
Samsung M267x 287x Series
3.00.01.27 or later
Samsung SCX-3400 Series
3.00.02.05 or later
Please update your printer with the latest firmware as mentioned in the table above.
To update the firmware kindly follow the procedure mentioned below.
Search for your printer model on the link below
http://www.samsung.com/us/support/supportMain.do
Download the firmware.
Run the downloaded file and follow the instruction provided on the installation screen.
PS. During firmware update do not power off or unplug power cord of your printer. Doing so may make your printer unusable.
Moreover if in case non-compliant toner is used, it may cause error after firmware is updated.
We apologize for any inconvenience caused. We will try our best to provide best service and customer experience.
Thank you,
Samsung AirPrint support

Doesn't work .

Firmware update problem for N73

Similar Messages

Maybe you are looking for