Firmware update resets photo numbers... AGAIN

APPLE has to get a grip... they are losing the skills to pay attention to details!!!
The firmware update has reset the photo numbers on the iphone4 to 0001 again!!!!!
What is wrong with these people?????????? This is really basic stuff and irritating.
Does anyone know of a workaround other than renaming every photo as I import it?
thanks,
tom

no one else has solved the problem either... why not work on this instead of PING?

Similar Messages

Most recent imac firmware update resets operating system back to snow leopard

I bought this computer when Lion was just coming out, so it still had the snow leopard OS. I have upgraded to Lion OS and updated all my software. This evening I get notice of a firmware update and iPhoto 9.2.1. I just did the install, and my computer is back to Snow Leopard 10.6.8. Just tried the Lion recovery disk I made on a USB not too long ago and that does not launch, and my Time Machine backup is showing the state it was before I upgraded to Lion.
Do I have to do everything over again? App store is showing that I have a Lion 10.7.2 available update.

OK I think I figured out what happened. Before I did do the lion OS update I had partitioned my hard drive, so that I still had a small section for snow leopard. I think the firmware update lost the fact that I had my startup disk set as the Lion one and set me back into the snow leopard one. I just booted into the Lion section and everything is still there, so no data lost.
Now that I have done with using snow leopard, I might as well departition the hard drive, and maybe this won't happen again.

Thunderbolt Firmware Update 1.0 strikes again...

So I ran SU on my Macbook Pro and it detected that TB F/W 1.0 needs to be installed. I thought that was odd since it's an old update that I know I applied back in July 2011.
I installed it. Seemed like it took. Checked SU again and it's still there.
I've cleared disk permissions, repaired them, installed it many more times. It's in the list as successfuly applied.
The data in system information is:
Firmware Version: 22.1
Link status: 7
Port Micro Firmware Version: 2.0.7
Do I have the most recent TB firmware or is something wrong?
My macbook pro is Early 2011, 13", 8GB Kingston Ram, OSX 10.7.4, Build 11E27.
Any help would be appreciated.

I've had the Beta for a while now.
Apple Dev site is where I got it from.
I was hoping multiple people had this update reactivate on them for some reason or another. It's odd that it just popped up today and won't go away.

IPhone resets photo numbers every sync

This seems to be a new problem since I purchased iPhone 4. Every time I sync my photos it resets the file names back to img_0000.jpg. This is super annoying when it comes to organizing photos in folders as many times you end up with the same file name. Is there a way to make it do a continuous count like it used to do? Is this a bug? If so will it get fixed? New camera in iPhone 4 was very compelling until this.

Suggest you complain to Apple:
http://apple.com/feedback
They don't track these forums to chart user pains, and if they don't get complaints, there'll be no priority on fixing it.

Macbook PRO EFI 2.3 firmware update broken

EFI 2.3 firmware update broke the network again. EFI 2.2 fixed what was broken in 2.0 & 2.1 but the
same problem is back in 2.3. Laptop wakes up and I have to wait about a minute for things to kick-in.
I am able to use utilities using system calls (ping, dig, etc) but Mail.app, Safari or anything else for
that matter is reporting that network is down (not sure if these are using an internal caching daemon
or something similar). On the initial 2.3 update the screen wake-up was also broken, I would touch
the pad or a key but the screen would remain dim and would light up after 30 or so seconds. Applying
2.3 twice fixed this issue. Following is an entry from system.log, you can see that the laptop is trying
to connect to the AP twice:
Nov 16 07:32:59 mobilepunk mDNSResponder[12]: ConfigResolvers: interface specific index 5 not found
Nov 16 07:33:00: --- last message repeated 1 time ---
Nov 16 07:33:00 mobilepunk configd[15]: network configuration changed.
Nov 16 07:33:02: --- last message repeated 2 times ---
Nov 16 07:33:02 mobilepunk airportd[42241]: _doAutoJoin: Already associated to “balkan”. Bailing on auto-join.
Nov 16 07:33:06 mobilepunk configd[15]: network configuration changed.
Nov 16 07:33:06 mobilepunk mDNSResponder[12]: ConfigResolvers: interface specific index 5 not found
Nov 16 07:33:06: --- last message repeated 1 time ---
Nov 16 07:33:06 mobilepunk UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
Nov 16 07:33:06 mobilepunk UserEventAgent[11]: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on balkan because it is protected and not on the exception list
Nov 16 07:33:06 mobilepunk UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
Nov 16 07:33:06 mobilepunk configd[15]: network configuration changed.
Nov 16 07:33:08 mobilepunk mDNSResponder[12]: ConfigResolvers: interface specific index 5 not found
Nov 16 07:33:09: --- last message repeated 1 time ---
Nov 16 07:33:09 mobilepunk login[42315]: USER_PROCESS: 42315 ttys000
Nov 16 07:33:35 mobilepunk com.apple.backupd[42326]: Starting standard backup
Nov 16 07:33:35 mobilepunk mtmd[65]: Set snapshot time:1321446817 (current time:1321446815)
Nov 16 07:33:35 mobilepunk com.apple.backupd[42326]: Error -35 while resolving alias to backup target
Nov 16 07:33:45 mobilepunk com.apple.backupd[42326]: Backup failed with error: 19
Nov 16 07:34:38 mobilepunk prl_naptd[39549]: Reloading configuration...
Nov 16 07:34:38 mobilepunk prl_naptd[39549]: vnic0: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
Nov 16 07:34:38 mobilepunk prl_naptd[39549]: vnic1: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
Nov 16 07:34:38 mobilepunk airportd[42328]: _doAutoJoin: Already associated to “balkan”. Bailing on auto-join.
At one point I though it was Parallels that's breaking this, but disable/restart of Parallels did not help.
Any hits ?

Wow! Exact same issues here. Exactly! The same slow screen-wakeup and screen-saver freezes.
Additionally, any time I try to view video in a web browser, it freezes (other things seems to do it too, but the web video (e.g. youtube) was one thing which was a reliable/reproducible cause of crash). BUT, when I use gfxcardstatus to force Discrete graphics only, then it seems to work fine. Manually switching it to Integrated (with gfxcardstatus), or allowing it to automatically switch, results in an immediate freeze. The freeze is not a kernel panic; the mouse still moves, but the interface is totally unresponsive. Well, technically almost totally unresponsive: Ctrl-Eject did EVENTUALLY (like, after minutes!) bring up the shutdown dialog on at least one occasion. But that's largely irrelevant, I can't work like that.
I had real trouble trying to install the EFI 2.3 update - in fact, I have not managed to install it according to Software Update.
After "installing" EFI 2.3, upon restart I get a bad chime (the sad-Mac sort of noise) rather than the usual start-up chime. Then there's a noise as though it's trying to spin up a hard disk or something, which abruptly cuts off though. It does that a few times (brmmmm,chk...brmmmm, chk, ...). I force-restarted it with the power button, held Cmd-Opt-P-R and then it did it's usual restart, and then booted. But Software Update says that the EFI 2.3 firmware is not installed.
Sounds like a hardware issue to me. Any thoughts?

SSH changes vs future firmware update

Hullo, I have made some changes to WD My Cloud via SHH: I disabled ipv6;I stopped two services through crontab (S85wdmcserverd and S86wdphotodbmergerd)etc, according to http://blog.cloud-client.info/?p=1365 In case of future firmware update and I perform the installation will the changes done be overwritten?Would be advisable to accept the update in the future? Thank you in advance.

Indeed, an answer from a user that has experienced the aggravation of firmware updating and vowed never again will he update; unless he has two clouds (one to update and the other to keep as backup). yes... once you update your firmware, all changes will be lost and if you had store script files in the /usr/local/sbin directory, they will be gone too... In a sense it is a good thing because if you had done a lot a changes, this reverts your device back to original factory state. Now I have heard rumors that if you by pass too many firmware updates and decided to upgrade from, lets say 3.04 (which happens to coincide with my current version) to the latest firmware 4.xxx which is probably 6 update versions ago, your device will be bricked. They say, the customers that runs and replies in this forum, that you will need to upgrade your firmware one by one until you reach the latest version. The other rumor is that many have updated their firmware to the latest version to find that nothing works, speed is slower, usb connections don't connect and of course drop outs are more frequent. Then there are those who says "I've upgraded and everything is fine", but that particular user probably has 5MB of data on his drive. Now here is what I suggest. 1. Always have another copy of your data which has nothing to do with firmware updates. Never ever copy your data to the Cloud device and erase the original unless you have another copy somewhere else. If you don't have another device and don't wish to buy another device, either leave the original on your original drive and use the Cloud as your backup, or subscribe to one of the free or paid online storage to keep a backup copy, but don't rely on the online storage as your only copy either, since places like Megaupload may disappear overnight and your only copy may be in the hands of the FBI.2. if you upgrade your firmware, it is better to have another Cloud for a 3rd backup. That way if something fails (and it would feel like it expecially when it goes white light on you), you have another device to use while the other one is being RMAed.3. If you have stopped the scans from occuring, the first thing that happens after an update is a flurry of activity from your Cloud trying to catch up on its scans and you might get locked out. So be prepared to SSH into it as soon as it lets you which is way way after the white light stays on for several hours (speaking from experience). 4. Once you SSH in, be prepare to repeat the fixes that you applied to your last version. For four years (or more), I haven't seen a switch to turn off the media scans although in version 3.04, they actually turned off the scans automatically dues to processor overload and it had a message on the UI telling me that the scans has been stopped and in order to restart the scans you must reboot (I didn't reboot for 6 months). You can skip firmware upgrades as I have without too much problems. Although they have fixed a couple of potential security threats, none of them should potentially affect you since you are behind a router. Although eventually I expect that I will have to upgrade my firmware simply for the reason that the matching iphone app will require the latest version. Perhaps on that day, I will sell my Cloud and move on to a more robust NAS. Good luck.. edit: the/bin/sh /etc/rc2.d/S86wdphotodbmergerd stop /bin/sh /etc/rc2.d/S85wdmcserverd stop are not permanent changes. If you reboot the Cloud, those two process will restart. The update-rc.d commands will disable the processes until you upgrade the firmware.

SMC Firmware Update

Hi,
I am wondering what results people have seen from the SMC update, I am not ready to install it yet....

I wonder why the firmware update only causes these issues on certain MacBooks?
Both the "random shutdown" and "vertical streaks on boot" issues existed before the firmware update came out, but again, those two issues only happened on certain MacBooks.
Since the firmware update for MacBooks is the same (i.e. the update I downloaded that didn't cause any problems on my MacBook is the exactly same update you downloaded only to have problems you've never had before), I'm wondering if there's some hardware differences between MacBooks that are causing the issues in the first place, and the firmware update is bringing them to light.
For the record, I have a 1.83 MacBook that before the update didn't have the random shutdown issue (but had the horizontal line issue once). After the firmware update, it hasn't had the random shutdown issue nor the horizontal line issue.

How do i retrieve all my info, photos, numbers that were on my phone. it was all lost when i plugged my phone in to update it...it began to sync then next thing i know everything was gone after the date of 8/2011

how do i retrieve all my info, photos, numbers, notes that were on my phone prior to my plugging it into my computer to update it?...it started to sync with itunes and when it was finished. everything from 8/2011 to current was gone. Please help!

http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your phone. Then you will go through the setup screens again as you did when your phone is new, and when given the option, select Restore from iCloud Backup.

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

MacBook Air SMC Firmware Update v2.0 update available again and again. How do I fix it?

I have installed MacBook Air SMC Firmware Update v2.0 three times and I still get an update available notification asking to install it again. This is a mid-13 MacBook Air running OSX 10.9.3. System info lists the SMC version as 2.13f7.
Does anyone know how to resolve this issue?

Hi,
- Are there any status or error messages in /var/log/install.log
- The Firmware version it should install is 2.12f137
- If there isn't anything in the log try:
Intel-based Macs: Resetting the System Management Controller (SMC)
and/or About NVRAM and PRAM
and check whether there is installation.
If no install, try OS X: What is Safe Boot, Safe Mode
then reboot normal, try the install again.
Hope this helps

Zen Micro Photo bugs need to be worked out - firmware update comi

Hi,
I've had my Zen Micro Photo 8gb for a month & have discovered some interesting quirks: first, I don't believe mine is defecti've, though I've had problems. I have encountered freezing on both the "Zen Microphoto" logo and "rebuilding library" screen; I scoured this forum and the Knowledge Base for answers, trying all that seemed applicable?- I tried disk cleanup and reboot (leading to rebuilding library freezes), reformats & carefully reloading the latest firmware?a couple of times. I've drawn some conclusions:?) Mediasource software is not working for me; when I switched to using only Windows Media , most problems went away.2) For whatever reason, "rebuilding library" can only be accomplished while my Zen is connected to the computer - should this be the case?3) It seems like the times my screen freezes on the "Zen Microphoto" logo I may have held the "on" switch to the side a little longer than necessary; I'm wondering if this is happening because I'm holding the switch on a little too long?Anyway, I love the size, look and sound of this player, so I hope to keep using it. NOTE: can anyone from CREATIVE tell me if there will be future firmware updates? Thanks
!!! Steve M.Message Edited by smills on 08-0-20070:24 AM

I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
Well i will keep on working on this issue.. ill let you know guys.

N97 / N85 - Hard reset - Firmware update Limit ???

Hi
Was wondering if there Is a max Limit to the numbet of times the Firmware can be updated
or the Phone can be Hard reset
before damageing the MEM Cards built into the N97 / N85

Nowhere its mentioned about the limit for reinstalling firmware updates and doing resets so with that i can say it can be done "many" times, basically its done when you encounter any problem doesn't gets resolved with other resets available, at last we resort to reinstalling firmware or Hard reset. I haven't come across any implications nor heard from anyone doing it often.
FYI N97 has a 32Gb hard drive built-in with an MicroSD slot for expansion.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card.

IOS 5 Update Issues (contact numbers, m4r files, photo library)

Right after updating my iPhone 4 to IOS 5, I encountered the following minor issues:
1. Most of my contacts numbers are displayed as numbers only without names when they call or message me. I found out that the country code is added to their numbers (wasn't the case before the update). So, a number, let's say, 555-5555, must be updated in the contact list to read (+555) 555-5555. When I add the country code however, I still receive a call or message without the name, because it comes out without the country code, i.e. 555-5555! Confusing indeed.
2. All of my m4r files, mainly ringtones, have disappeared from my iPhone, though the sync process via iTunes shows they were properly transferred to iPhone. When I go to Sounds setting, or playlist, there is none. (Wasn't the case before the update. My ringtones were part of the Sounds setting)
3. I have double photo albumes for the same photos in my iPhone photo library. I only select one folder in my computer to sync with iPhone, so the photos in this folder are now copied to Camera Roll, and another folder called Mobile. (Wasn't the case before the update. Photos were placed in Camera Roll only)
Other than that, all working fine so far.

Note on point 1:
This is the issue with contact numbers as I further found out:
The problem basically with messages and calls.
Adding a country code to a contact number will show contact name in messages but not in calls coming therefrom.
Removing the country code from the contact number, will show only phone number in calls but not in messages where I only get the number without the name!
To overcome this problem, I have to register the same number for each contact twice, one with a country code and the other without! Duplicating numbers for each contact obviously is not the right solution.

Firmware update resets photo numbers... AGAIN

Similar Messages

Maybe you are looking for