Firmware update / xbox connection / disappearing connections on WRT610N !

I dont understand this anymore, I upgraded my router to the new firmware, did the reset 30 secs and then when I entered LELA I could see that the FIRMWARE of my Router is indeed upgraded to v1.00.02 B10 . But after 1 hour I checked again, and now suddenly the firmware is UNKNOWN in LELA, I cant find the new firmware update anymore ! Also I lost connection again with my XBOX360 which I had for 30 minutes. In my Linksys Router WRT610N I have the security settings on WPA2 but in XBOX360 I can not enter a WPA2 code, only a WPA code. That worked fine for 30 minutes as told before, but NOW there is no connection anymore to XBOX LIVE. I already forwarded the Ports 88 and 3074 to BOTH under the IP adress of the XBOX360 and enabled it, also still visible in the Router webpage settings. WHAT IS CAUSING these constant CHANGES of firmware and loss of connection to Xbox etc ????

You should also assign static IP Address on your x-box like 192.168.1.20, subnet mask : 255.255.255.0, default gateway : 192.168.1.1 and make sure you forward ports 53, 88, 3074 for 192.168.1.20...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
4) Once you return to the set up page click on the Security tab and uncheck Filter Anonymous Internet Requests and click on Save Settings...
5) Click on set-up and change the MTU Size to 1452 and click Save Settings...
6) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
7) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
8) Turn off your modem, router, and Xbox...Wait for a minute...
9) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Similar Messages

Firmware update lost connection to my Time capsule

I have just downloaded the latest firmware to my time capsule, and now cannot reconnect. Please don't tell me that I have to reset it because it must have taken 2 days for the 1st download to complete. This was after many failed attempts.
HELP

This is what I did:
1st Press & hold the reset button until the LED flashes amber
2nd Launch Airport Utility & let it scan and find the Time capsule
3rd select that you want to config the device manually
4th The next menu will show the current configuration, at this point move your curser to the point that shows the firmware version. Click and you should be able to select the previous firmware version.The device should then be loaded with the this version.
Then I closed then relaunched Airport Utility and used the assistant to cinfigure the device.
Not sure if this will cure your problem but I have been trying all day and this is the only thing that worked.
Hope you get it solved

Creative Support. What R U Doing About The Firmware Update Iss

This post is primarily aimed at Creative Support.
Like many other out there that have a Zen player, i recently decided to upgrade my 40Gb Zen Touch's firmware from .0.03 to the latest PlayforSure version 2..0.
This is what i did on my Dell p.c.
) Upgraded my Win Media Player from version 9 to 0.
2) Backed up all my mp3 data to the HDD.
3) Erased all of the mp3 data from the player.
4) Connected the player to my p.c via USB ( 2.0 ).
5) Ran the firmware update, and selected to proceed with the upgrade.
During this process it warned me that the player may reboot a number of times during the 5min upgrade. The player rebooted twice, but on the 2nd time the update software couldn't initialize the player. I left this for about 5mins, to no joy.
I stopped the update via the close button and disconnected my player. When rebooted this shows the error "Firmware Problem" and proceed's to the Recovery Mode screen.
If i choose the "Reload Firmware" option this proceeds to Erase the firmware and then states "Start firmware update now". Even though the firmware software is on my desktop and the player connected to the p.c it fails to reload the firmware.
Now.... On my p.c, if i go into "My Computer", the player is clearly linked and present as an other linked device. However if i run the firmware update software from the desktop it say's "Your player is not connected, please connect your player".
This is a contradiction since the fact that my computer successfully detects the connected player and Media Player 0 also recognises that it is connected.
Like many other's out there we have paid good money for your products and expect a bit of commitment back to resolve these issues. For now i have player that might as well be a book-end.
Questions to Creative Support:
) Are you fully aware of the amount Zen owners experiencing this problem?
2) Are you working on a fix for this update problem?
3) If yes to question 2, when are we likely to see the results of this?
Regards

Wish I had seen this thread before attempting to update my firmware to the SurePlay version.
This is what I did.
I downloaded the Firmware, downloaded the extra software and download Windows Media 0.
I ran the firmware update and connected my player to the computer, no problems.
It said the player would reboot several times and on the 2nd or 3rd, it would no longer connect my device. It would tell me that there were no drivers for the device.
I tried re-booting the player several times, as it will now only boot into recovery.
I have re-installed the drivers, I have even re-verted back to the original drivers from the CD, but it now will not even connect. If I can't connect the device, I can't put any firmware on the Zen, which means I can't use it at all now.
I have been through the knowledge base, but even narrowing down my search to only Zen Touch players, I get several pages of irrelevant information.
I have e-mailed Creative and will see what response I get and I have also posted on another forum.
There must be someone out there that can help sort this, it was an excellent present to me and now its not working
Thanks
Bubs

New Zen 8GB crashed during firmware update; now I can't get it to reboot or connect to a compu

I went and exchanged my "problematic white screen" ZEN 8GB for a new one this evening. When I came home, I attached the new unit to my computer and started to perform the required firmware upgrades. The upgrades downloaded fine, but after the installation started, they seemed to freeze. I waited for an hour before I did anything, but finally had to assume that the update had malfunctioned and would never finish on its own. At that point I clicked "cancel" in the window monitoring the upgrade installation, and thought I could just start the process anew. Unfortunately, my computer no longer recognizes the ZEN when it's plugged into a USB port.
I rebooted my computer, just in case that was the problem, but it still can't find the ZEN when searching for devices to AutoUpdate. As for the Zen itself, I can turn it on and off, but the screen remains black (i.e., no info on screen). If I reset it, the screen flashes the word "Creative" only. If I try to do a Recovery, I can't get any text to appear on the screen. I can't even reformat the ZEN via my computer because they're no longer speaking. I assume that the interrupted firmware installation caused this problem, and that the ZEN just doesn't have enough of an operating system installed to work properly. Is there any fix for this that I can tackle myself Or, is it back to the store to return this one, too I have noticed a lot of white screen flashings as I've been working with the new ZEN, so perhaps this just wasn't meant to be. Any words of advice are certainly appreciated, however.

Same happened to me and I only had the thing a few hours. I may leave it connected overnight to see if the battery needs charging but if nothing happens it's going back. I've tried plenty of suggestions. The Creative screen flashes on when I plug it in but then just sits there. Reseting does nothing and how can you do anything to it if it's not recognised by the PC. Vista did see it before the update attempt. Wondered whether to throw XP back on.
Do I have to resort to the new ipod Nano
OK I've done it. Somewhere on this forum it said to disconnect the Zen from the PC.
Now at the same time, press and hold the play/pause button, put a pin into the reset button and hold down the on/off switch (yes all 3 in that order at the same time). Recovery mode came on and I tried to uninstall the firmware update from previously - it didn't do it but I updated the latest firmware again anyway and this time it worked. I guess the last attempt didn't take.
Message Edited by nimble on 2-06-200709:34 PM

Possible Solution to Apples not Being Able to Connect to WRT54G After 1.01.0 Firmware Update

So like everyone else that has apples on their networks, ours did not work after the 1.01.0 firmware update. However after a few hours and messing around, I finally got them to work with the router without having to downgrade to .9.
So far they still work thorugh a restart and a cold start, so I'm hoping that this fix will stick.
To get this to work you need to have another open wireless connection that you can connect to and get online with.
Steps:
1) First open up safari or whatever you use... (obviously doesn't load otherwise you wouldn't be reading this)
2) Connect to the open wireless network, and then hit refresh... (it should load up the page this time)
3) Go back up and reconnect to your router.... now try your internet again using your connection. It *should* work fine... and you shouldn't have to do it ever again...
Good luck, hope this helps

HI , just an addition to the above.....for MAC's go to system preferneces and then to network...choose you network card uner "connect using" and then under the TCP/IP tab select configure manually.....assign a static IP , subnet and gateway to the MAC along with the DNS entries....this static IP will work with the 1.01.0 firmware version .

Time Capsule Firmware update 7.4.2 not connecting to Dell 1370

Having installed the firmware update I now find that one of the PCs on the network, a Dell Inspiron 1300, can no longer connect to the network.
Any suggestions or do I have to go back to 7.4.1

i recommend an update to 7.4.2 as it fixed a lot of bugs! if i were you, i'll save the base config of my current settings since im happy with it. Proceed with the firmware update. If its good stick with it. If its problematic, downgrade the firmware then import your baseconfig.

Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-ES2C
iTunes 11.3.0.54
QuickTime not available
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9F0069DE9C0
Current user is an administrator.
The current local date and time is 2014-08-05 01:48:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 8400 GS
**** External Plug-ins Information ****
No external plug-ins installed.
The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
Description:    WAN (PPP/SLIP) Interface
IP Address:    10.128.133.101
Subnet Mask:    255.255.255.255
Default Gateway:    10.128.133.101
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 06:00:00 1970
Lease Expires:    Thu Jan 01 06:00:00 1970
DNS Servers:    8.8.8.8
        156.154.70.1
Active Connection:    Teletalk
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-08-04 03:23:27.
**** Device Connectivity Tests ****
iPodService 11.3.0.54 is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi msahed,
Welcome to Apple Support Communities.
It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
iTunes: About the "A secure network connection could not be established" alert
http://support.apple.com/kb/ts1470
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
I hope this helps.
-Jason

Itunes update to firmware fails, because connection times out.

I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description:          Realtek PCIe GBE Family Controller
IP Address:          192.168.2.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.2.1
DHCP Enabled:          Yes
DHCP Server:          192.168.2.1
Lease Obtained:          Tue Nov 15 11:32:39 2011
Lease Expires:          Tue Nov 15 11:32:38 2011
DNS Servers:          192.168.2.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.

Disable your firewall/security software and try again.

Airport Extreme Firmware Update 7.3.2 no longer connects to internet

Automatic Updates recommended Airport Extreme Firmware Update 7.3.2, which I accepted (BAD). The Airport Extreme does have a green light, but CANNOT connect to the internet. Cannot "Check for Updates" with Airport Utility (option key down) because I cannot access the internet. Airport Utility shows 7.3.2, but nothing lower. Is there a location on the mac where the older driver resides?
Numerous restarts, resets, etc with both the Cable Modem and Airport Extreme and my MacBook do not help.
How do I download 7.3.1? Can I? How can I revert?
I can access the internet from another network, hence this email.
Any suggestions would help!

When I updated to the Airport Extreme to 7.3.2 firmware it was dropping wireless connections randomly, Today I reverted back to 7.3.1 and looks like it is staying up for now but I am still shell shocked. To revert back in Airport Utility:
1) Hold down the option key(Mac), the Control key for Windows at the same time clicking on Check for updates
This will open a popup window with the previous versions, select the Airport Extreme Firmware 7.3.1 update and click download.
2) After the download is done, from Base station file menu drop down select Upload Firmware, you will get a choice to download different firmware updates, select 7.3.1.
That should install the 7.3.1.
There you go enjoy.

No network connection after hp laserjet m602 firmware update

After updating firmware on our hp laserjet M602 printers, the printers are no longer communicating with our print server. I can't even print configuration pages, if the Network cable is connected. The update completed successfully and I can print using a USB connection. The Event Log displays the following:
EVENT:           42.B0.01            Firmware:     23000331_377983
Description: Missing String ID: en-US: Please refer to the Jetdirect Admin Guide_Text
Additional Notes:
Before firmware update:                                            After firmware update:
Firmware Datecode: 20111217                                   Firmware Datecode: 20130722
Firmware Revision: 2131305_192069                     Firmware Revision:    2300331_377983
All Help will be greatly appreciated.... JP

Try to turn on device while network cable is disconnected (standalone) and let it completely boot till READY status.
Connect the network cable & note the front panel status (display & LED's both). Also note if the LAN port LED's are ON.
Hope that there is no data being processed by printer (data LED on control panel). If yes, then you might need to delete any pending jobs (including firmware download initiated from computer - if pending in que as a job)
If printer shows READY status without any data, then you may try printing printer internal documents using control panel menus. Next step will be to access printer through web brower (EWS page) and confirm if the device is available for use in network.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Connection attempt to firmware update server was unsuccessful.

I have successfully installed iTunes 10.5 onto my WIndows 7 64 bit laptop. Everything I have tried works, except for one thing.
When I try to install iOS5 onto my iPad 2, I can successfully download the file but shortly after it starts installing, it bombs out and gives an error 3259 and then deletes the iOS5 file so I have to download it again!!!!
I found the Diagnostics thing in iTunes and everything seems fine except the below (normally the activation server is fine when I run the diagnostics, but this time it failed):
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
I have tried the following:
1. Delete contents in hosts file
2. Deselect the certificate revocation checkbox
3. Checked SSL3.0 and TSL 1.0
4. Turned off my firewall
5. Added the whole Apple domain to the Exclude list on my anitvirus
6. Added all the iTunes/Apple/Bonjour folders in Program Files, Program Files (x386), Local, Local Low, Roaming and iTunes in My Music to the Exclude list on the antivirus
7. Tried to run the diagnostics on a second computer, with the same result
8. Switched my laptop over from my Wi-Fi/ADSL network to my phone hotspot network with the same result
9. There are one or two other things I have tried as well that I can't remember
I have spent about 4 hours searching the internet, changing settings, restarting etc etc etc and I am about to punch a hole in my iPad and go get an Android device
PLEASE, PLEASE, PLEASE can somebody tell me why this is happening and how I can fix it

I have found a solution to the iOS5 upgrade that was being stopped by the above connection problem.
1. Unplug your iPad from your computer and plug it back in again
2. A message box will come up that asks if you want to download and install or just download the new iPad firmware.
3. Use the DOWNLOAD only option.
4. Once it has downloaded, click on your Device in iTunes and it should start to install automatically

Trying to restore iPhone 4s, and receive "Connection attempt to firmware update server was unsuccessful. The network connection timed out."

I've tried updating on both my desktop and laptop, neither work. I have the newest version of iTunes as well, so that can't be the problem. When I run diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion g7 Notebook PC
iTunes 11.3.1.2
QuickTime not available
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038BB880CE6FDE0
Current user is not an administrator.
The current local date and time is 2014-09-04 12:48:09.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
Plug-in Name: Last.fm AudioScrobbler
Plug-in Loaded: Yes
Plug-in Version: 4.0.5
Plug-in File Version: 6.0.5.4
Plug-in Path: C:\Program Files (x86)\iTunes\Plug-ins\itw_scrobbler.dll
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {CE989488-FC81-488B-A970-91D722749820}
Description: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Thu Sep 04 12:18:22 2014
Lease Expires: Fri Feb 25 02:18:22 2022
DNS Servers: 192.168.254.254
Adapter Name: {5E3757D2-481F-4D48-B535-A6A6ACF48517}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 17:00:00 1969
Lease Expires: Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-09-04 12:47:39

Hi christeag,
The only thing I can identify as an issue is that your Windows Firewall is running and iTunes is not enabled in it, so this may be the source of your issue. Here is an article for you that will help you rectify this situation:
How to enable iTunes in Windows Vista, Windows 7, and Windows 8 firewall
http://support.apple.com/kb/HT2553
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Connection attempt to firmware update server was unsuccessful. The network connection timed out

Hi. I have recently updated my iTunes to version 10.5.0.142 and cannot access the iTunes store after the upgrade. I have checked all the support articals and tried uninstalling and reinstalling iTunes, ensured that the firewall,internet explorer etc are correctly configured. Any help would be appreciated.
Below my diagnostics results:
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Microsoft Windows 7 x64 Business Edition (Build 7600)
Dell Inc. Latitude E6520
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0034AABC03B14CA8
Current user is an administrator.
The current local date and time is 2011-11-05 23:04:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 4200M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D16D8541-B70F-4DD7-A7C6-32B8EC55622C}
Description: Cell C
IP Address: 197.105.149.240
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers: 41.50.20.29
41.50.20.61
Adapter Name: {37C32779-B216-4D52-80FA-B4C3DF705DF3}
Description: DW1530 Wireless-N WLAN Half-Mini Card
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Adapter Name: {6ADC43CF-4031-4D31-9B46-2BF2867B8E09}
Description: Intel(R) 82579LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Active Connection: Cell C
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-05 22:37:41.

Finally found a solution:
For PC users, before reinstalling, try this:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run as Administrator
then type in:
netsh winsock reset
hit enter, restart PC, open iTunes. Hopefully fixed.

MuVo "device not connected" firmware update error

When I try to execute the plan given by Pook Kok Choy (below between "=====")
I successfully get MUVO_DRV_LB_00_04_250.exe installed.
When I move to step 2 I have the device attached to the PC but I get the message "device not connected to the USB port".
This happens, with the device connected and on while trying to install:
MUVOAudible_PCFW__40_2_L4.exe
Apparently, I am not alone in having this problem.
Apparently, this happens to others - using XP - specifically when trying to do this firmware upgrade in order to play purchased WMA, DRM protected music.
The PC recognizes the MuVo 28.
It assigns it a dri've letter when it is plugged in.
The install procedure for the *Audible* firmware does not see it.
Please help.
Tbanks,

JLRtist,
After you have installed the latest downloaded driver, did you run the player into recovery mode? Try this,press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file.
Jason

Firmware update / xbox connection / disappearing connections on WRT610N !

Similar Messages

Maybe you are looking for