Firmware updates changelog?

Just saw that a new firmware update is available for my Yoga 2 8".
Does anyone know what the update will fix?
Why isn't there a changelog?
edit: YT2-830LC_USR_S000133_1501151106_WW21_ROW

Why does the firmware update always reinstalls those built in apps that I have deleted? It's really annoying.

Similar Messages

  • E70 Firmware updates: Changelog?

    Hi.
    Anyone knows where can I find the changelog of these firmware updates?
    My version is 1.0610.05.07 and everything seems to work fine. I'm wondering if there is an advantage to upgrade.

    Sure, the V2 is at the very least better than V1, memory issues etc. As change log goes, I've seen it before and it's extensive. Google it up all I can say.
    And what do u mean it's working fine. You don't get frequent crash coz of memory issues ?
    That's good. But even V2 for me is not sufficient. The GUI is slow as hell for me, compared to other phones.

  • 2.1 firmware update listed signal strength display fix in its release notes

    Summary to those who haven't read Apple's latest letter to iPhone 4 owners:
    Apple is saying 'death grip' only affects the graphics of the signal strength not signal itself. Who accepts that? And will therefore fix this in the next firmware update.
    But wait! This seems to be fixed in the 2.1 firmware update already!
    See 2.1 firmware update changelogs.
    Google it, I don't want to post direct link as Apple may start pulling that information down.
    Message was edited by: Venomrush

    Letter from Apple Regarding iPhone 4
    (emphasis mine)
    {quote}the formula we use to calculate how many bars of signal strength to display *is totally wrong.*{quote}
    {quote}We will issue a free software update within a few weeks that incorporates the corrected formula. *Since this mistake has been present since the original iPhone*, this software update will also be available for the iPhone 3GS and iPhone 3G.{quote}
    But the 2.1 firmware had in it's release notes as one of the improvements:
    {quote}improved accuracy of the 3G signal strength display{quote}
    So in 2.1 they improved the accuracy of a totally wrong formula?
    Something is rotten in Denmark.

  • Xperia Z1 14.1.G.1.534 Firmware Update

    Xperia Z1 Android 4.2.2 14.1.G.1.534 Firmware Update Rolled
    Confirmed on LTE C6903 version.
    RAM management improved. Have you got this update ? Mention the changelog if you have.
    SOURCE - http://www.xperiaguide.com/2013/09/22/xperia-z1-android-4-2-2-14-1-g-1-534-firmware-update-rolled-ou...
    Don't forget to give Kudos.

    What kind of battery drain issues did you have? - Mine is draining battery quite fast aswell. 6 hours of use on wifi and its done.
    To poster, i got the update today. But I'm also searching for what it fixes.
    I found some information here:http://forum.xda-developers.com/showthread.php?p=46020073 , its seems like the update courses the device to heat less? - seems like my device still heats up, the same.

  • E72 Firmware Update: 31.023

    Changelog:
    * WAPI support for China
    * Internet radio
    * Smart Connect
    * Bloomberg
    * Advanced Communications Manager
    Updated
    * Freestyle email (2.05, BL3, csw.32.rd_email_10w04)
    * My Nokia (4.1)
    * Nokia Maps SR3
    * Share on OVI (4.3)
    * OviStore (1.5.436)
    * Cherry (2.1)
    * Browser 7.2
    Corrections
    Only major corrections listed.
    • Stability improvements
    o Memoryleak corrections to improve general stability
    o Music player, radio, video recording, earphone, security sw and encryprion stability corrections
    • Localisation corrections(MAPS, Calendar, Contacts, Email and Browser area)
    Email improvements
    o MFE activation registration correction
    o Synchronisation correction to mailbox creation(like Yahoo and Gmail) for the first time
    o Email editing correction(dubling of words when deleting suggestions)
    o Correction to synchronization when syncing draft meeting request
    o Set default setting “Sync while roaming” to “No”
    o Sending message without password initials crash correction
    o Messaging menu memory leak correction
    Calendar
    o Meeting request creation stability corrections
    o Requiring meeting request corrections
    o Meeting request saving correction if meeting request is saved before sending
    o Meeting update send after editing request
    Contacts
    o Contacts stability improvements (arrow keys pressed rapidly before contacts are loaded, add searched contact to the goup without name, mail box removal, open/close contacts during call, conference call with two same name participants, … )
    o Company name displayed in contacts
    o Group deleting correction when goup is deleted from group edit view
    o Contact group editing view corrections
    o Contacts search corrections (Group cannot be searched after editing its conference service number, Image detail of marked contact is not displayed in search result, Group disappears when add contact to it in searched result view)
    Home screen
    o Missed call indicator removal correction after call has been accomplished form action menu
    o Message notifier corrected when several voice messages received
    MAPS
    o New maps version included
    o Free navigation
    o Improved GPS handling
    o Landmark corrections(land mark received vie MMS, Landmarks are not displayed when selecting places during planning route from landmarks application)
    o Voice guidance corrections (turning directions, safety camera)
    o Route planning/saving corrections
    Browser
    o Browser bitmap memory leak correction
    o Browser closing stability improvement before connection is open
    o Secure connection icon corrections (going to an other secure page, secure connection canceling)
    o When moving multiple Bookmarks, the last selected Bookmark is not moved
    o Bookmark icon correction
    Other
    o Spacebar stops working correction
    o Emergency call correction when lock code query is on and call made quickly after power on
    o Theme effects disabled by default
    All from: http://dailymobile.se/2010/04/20/nokia-e72-firmware-updated-to-version-v31-023/

    Changelog:
    * WAPI support for China
    * Internet radio
    * Smart Connect
    * Bloomberg
    * Advanced Communications Manager
    Updated
    * Freestyle email (2.05, BL3, csw.32.rd_email_10w04)
    * My Nokia (4.1)
    * Nokia Maps SR3
    * Share on OVI (4.3)
    * OviStore (1.5.436)
    * Cherry (2.1)
    * Browser 7.2
    Corrections
    Only major corrections listed.
    • Stability improvements
    o Memoryleak corrections to improve general stability
    o Music player, radio, video recording, earphone, security sw and encryprion stability corrections
    • Localisation corrections(MAPS, Calendar, Contacts, Email and Browser area)
    Email improvements
    o MFE activation registration correction
    o Synchronisation correction to mailbox creation(like Yahoo and Gmail) for the first time
    o Email editing correction(dubling of words when deleting suggestions)
    o Correction to synchronization when syncing draft meeting request
    o Set default setting “Sync while roaming” to “No”
    o Sending message without password initials crash correction
    o Messaging menu memory leak correction
    Calendar
    o Meeting request creation stability corrections
    o Requiring meeting request corrections
    o Meeting request saving correction if meeting request is saved before sending
    o Meeting update send after editing request
    Contacts
    o Contacts stability improvements (arrow keys pressed rapidly before contacts are loaded, add searched contact to the goup without name, mail box removal, open/close contacts during call, conference call with two same name participants, … )
    o Company name displayed in contacts
    o Group deleting correction when goup is deleted from group edit view
    o Contact group editing view corrections
    o Contacts search corrections (Group cannot be searched after editing its conference service number, Image detail of marked contact is not displayed in search result, Group disappears when add contact to it in searched result view)
    Home screen
    o Missed call indicator removal correction after call has been accomplished form action menu
    o Message notifier corrected when several voice messages received
    MAPS
    o New maps version included
    o Free navigation
    o Improved GPS handling
    o Landmark corrections(land mark received vie MMS, Landmarks are not displayed when selecting places during planning route from landmarks application)
    o Voice guidance corrections (turning directions, safety camera)
    o Route planning/saving corrections
    Browser
    o Browser bitmap memory leak correction
    o Browser closing stability improvement before connection is open
    o Secure connection icon corrections (going to an other secure page, secure connection canceling)
    o When moving multiple Bookmarks, the last selected Bookmark is not moved
    o Bookmark icon correction
    Other
    o Spacebar stops working correction
    o Emergency call correction when lock code query is on and call made quickly after power on
    o Theme effects disabled by default
    All from: http://dailymobile.se/2010/04/20/nokia-e72-firmware-updated-to-version-v31-023/

  • Macbook4,1 10.6.8 and firmware update - what went wrong?

    Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
    I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
    Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
    I clicked OK and it installed.
    Upon reboot, it seemed to install okay.
    But then I left the Macbook and it went into Sleep.
    I didn't come back to it again until the next day.
    When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
    And this is where the problems started.
    After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
    And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
    It finishes booting, but seems to go into Sleep.
    I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
    And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
    I've tried changing RAM, but problems remain.
    So what's all this? Any ideas?
    The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
    It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
    Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
    I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
    Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

    Thanks for the reply.
    Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
    I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
    Which capacitor?
    No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
    1) it came thru Software Update
    2) there was no warning
    3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
    I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
    Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

  • New symptoms since latest firmware update

    OK I have a 1tb sky hd box which hasn't had any really annoying issues up until the new firmware update (the one with the new Kids tile which is annoying in its own right).  Anyway, I have been watching the cricket on SS2 and every so often when they break for a short advert between overs I've lost sound when it tries to revert to DD5.1 after switching from 2.0 on the adverts.  I have to change channel and back again to get the sound back.    Also, for the first time, my planner was showing empty today so I had to do a planner rebuild which solved the issue.  Still, at least they  seem to have solved the sound dropout issue.  So just heads up for anyone else with a 1tb box who experiences the same issues.

    (Quoting Karl Petersen here:)
    There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
    The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
    Sue

  • Cisco Router tried to take a firmware update and no longer works

    Ok so internet was working fine until Cisco Connect told me to take an update.  My connection is wired and there were no disruptions during the download.  Yet the download still failed and now my power light blinks continuously and there is no internet access.  I tried instructions on "How to unbrick your Cisco Router", even got them to work, it took the firmware update from the cmd line.  Still doesnt work though.  What's wrong with this thing and how do i fix it?
    Solved!
    Go to Solution.

    I ended up downloading a firmware utility program and was able to get it to reload. The power light became solid somewhere between 2-5 mins, however still didnt connect to the internet.  Found that all this factory resetting will change your Internet access name & password, with no way to find out the new one.  You have to remove the Cisco Connect program from your computer and reload it from the original disk.  Only then will you be up and running again.  While I appreciate the response Helm, I was way beyond a 30 second reset button solution when I posted this lol.

  • Macbook 2008 4,1 serious problems after 10.6.8 and 1.4 firmware update

    I'm having a problem with my 2008 2.4Ghz Macbook. After doing a fresh install of 10.6.0 with a Retail DVD, the MB was working perfectly, absolutely no problems at all. I then ran Software Update and installed all the recommended updates to 10.6.8, and I only noticed in passing that there was a Firmware update to do too, as reported by Software Update. I ran that as well and, IIRC, it was applied after fully updating to 10.6.8 and after rebooting twice. The MB rebooted, ran the Firmware update (which seemed to complete fine, as the progress bar completed normally against the grey screen), then rebooted. Again, IIRC, after running the Firmware update, and I'm now at 10.6.8, I started a Repair Permissions and left the MB for a while. It was the next day, maybe 15 hours later, when I went back to the MB and it was in Sleep. I pressed a key to wake it and this is when the weirdness started.
    The screen was "fuzzy", sort of out of focus, though I could see the desktop, and what I could see was: the Disk Utility window open on Repair Permissions (which had completed normally) and several Vertical Segmented Bars running across the bottom part of the screen, at about the height where the Firmware Update progress bar was. These bars were filling in from left to right. IIRC, it may have looked a little like when you wake from Deep Sleep (or Hibernate, or whatever it was called). Like when you Wake from Sleep after the battery has run out and then you plug the AC adapter in.
    Anyway, before the Vertical Segmented Bars progress was completed, the screen went black. Pressing keys didn't bring the desktop back.
    I did a forced shutdown, reset the SMC, then rebooted. No startup chime. The Superdrive, hard drive and fans spun up, but the screen remained black. After a few reboots, I got a desktop back, and tried to reinstall from both an external HD (with Restored disk image) and the Retail Snow Leo DVD. Both times, the MB booted to the startup screen: with the external HD, I held down Option and chose the Snow Leo install; with the DVD, the MB started normally while I held down the C key. The boot started from the HD and the DVD, but after about 60 seconds, with Apple logo and the spinning "cog wheel", the screen went black. And seemed to shut down. With the external FW hard drive, the drive made a loud click, its LED went off, then it came back on after a few seconds, as if it had lost all power to it, then the LED lit up when power returned to it from the shut down MB. Anyway, the installs failed.
    I then attached the 2.4 MB to another MB (2.1) in Target Disk Mode and it booted fine into TDM. It showed up on the 2.1's desktop, I ran Check Disk and it checked out okay. I then looked under Startup Disk and the 2.4's disk was listed there, with 10.6.8.
    I then booted the 2.1 from the 2.4's disk and it booted fine. I ran check Permissions, and a huge list of permissions to repair came out. At this point, I've left things as they are. The 2.1 is booted from the 2.4, the latter used as external boot HD.
    I then replaced hard drive and RAM. Tried to boot from DVD and install, got to Apple logo and spinning cog wheel, but after about 2 minutes the screen went black.
    I then connected an external monitor and rebooted from the DVD. The external display received a video signal and I got to the Snow Leopard install screen. All this time the Macbook display has remained BLACK.
    I went to Disk Utility and reformatted the new drive, then started the installation, which completed fine. The Macbook runs normally connected to the external display.
    Any thoughts?
    Why would the Macbook display work fine at boot (Apple logo, etc.), but then cut out after about 2-3 minutes?
    Why would the Macbook screen remain black while I got a video signal on an external monitor?
    Does this sound heat-related in some way? I should note that while booting from the DVD and now installing Snow Leopard, the fans are going pretty fast.
    I just want to point out that this was an absolutely pristine, impeccable Macbook until these recent problems. It is in fantastic condition, none of the usual chips out of the top case and trackpad area. After the latest fresh install of 10.6.0 it was perfect upon reboot. Fast, perfect Airport and Bluetooth, FW and USB worked perfectly with a FW drive and USB mouse I hooked up. The update to 10.6.8 via Software Update seemed to complete fine.
    Then all the problems started AFTER THE FIRMWARE UPDATE.
    I don't know how much stock can be put in the firmware update being the cause of the problems, but the sequence here would bear that out. These are also somewhat unusual problems, at least in my experience.
    One of the odd things was when I first went to wake the Macbook after the firmware update: the "fuzzy", out-of-focus screen and the segmented progress bars. And it was just before the segmented bars completed progress from left to right that the display cut out and went black. And from that time on, I've had the aforementioned problems.
    Any ideas or links to similar problems would be greatly appreciated, e.g. possibly firmware related, or where the Macbook screen works but goes black after a couple minutes. And now that I've been able to connect to an external monitor, it would seem that the video signal is okay too.
    Thanks.

    Just to update.
    After leaving the Macbook unplugged and without battery for a few days. I reset the SMC and, with no battery installed, I've just now rebooted and:
    1) the first time, it booted, but no chime, and when the display turned on, once again I got the "out of focus" desktop AND the segmented vertical bars on the desktop (and the bars were filling in from right to left); the display went black after about 10-15 seconds;
    2) I shut down and swapped some different RAM, then reset the SMC again and booted without battery. This time I got the boot chime and the Macbook booted to the Apple logo screen and spinning cogwheel. After about 2 minutes, the cogwheel stopped spinning, as if to boot to the desktop, but then the display went black. The front light started to pulse after about 10 seconds, and the Macbook appeared to be in Sleep.
    3) I woke the Macbook from sleep by hitting a few keys and this time it went to the desktop. This is the first time it's gone to the desktop since the problem started.
    I had enough time to see that everything appeared normally on the desktop, such as the time and date, Airport was connected, etc. And then the display went black again, after about 10 seconds.
    At this point, I can now always get to the desktop, but the display goes black after about 10 seconds. I have just enough time to press a few keys and the Macbook does respond.
    4) I shut down and reinserted the battery. Here's where new problems show up.
    With the battery inserted, and the Macbook in sleep, if I hit a key, the DVD spins up as the Macbook is waking, BUT now the front sleep indicator light FLASHES (blinks) 5 TIMES. No beeps.
    The Macbook still gets to the desktop, like before, and the screen goes black after 10 seconds.
    I found some info on the Apple site re. 5 flashes (Article 21502):
    If you don’t hear beeps, but the sleep indicator light flashes five times when you start it up or wake it from sleep, its battery may need service. Take the battery to an Apple Authorized Service Provider, such as an Apple Retail Store.
    For more information, see the Apple Support article below.
    You can continue using your computer before you service the battery. Use a different battery, or connect the computer’s power adapter and plug it into a power source.
    Note:If you use your computer without a battery or with a faulty battery, you could lose all unsaved changes if it’s unplugged while it’s on.
    BUT, the battery is not defective, as it works okay in another Macbook.
    I should also point out that the problem with the 5 indicator light flashes or with the battery did not exist before the 10.6.8 and the Firmware 1.4 updates.
    Any ideas?

  • No updatable devices found after firmware update

    Unfortunately I didn't check here before doing the latest updates. I dl'd the following on the night of July 1:
    2007-07-01 01:49:08 -0400: Installed "SuperDrive Firmware Update" (2.1)
    2007-07-01 01:49:31 -0400: Installed "iTunes" (7.3)
    2007-07-01 01:49:35 -0400: Installed "Safari 3 Beta Update" (3.0.2)
    2007-07-01 01:53:02 -0400: Installed "Mac OS X Update (Intel)" (10.4.10)
    2007-07-03 00:30:01 -0400: Installed "Audio Update 2007-001" (1.0)
    Since then each time I restart the computer the SuperDrive Update launches and tells me no updatable devices have been found. But this machine has a SD, unless I'm very much mistaken. Why won't the update take? Is it related to the ex HD issues I've been reading about here with 10.4.10?
    I also just looked at my sys log and it could be its own novel since these updates. I was going to post it in hopes it would help the Mac guys smarter than I, but I think it would flood out this post.
    I am also having the internet drop issue, again only when I'm on battery power, but I understand that's a bigger issue than just my machine. My Safari windows seem to be hanging and giving me the spinning beach-ball a lot when I try to scroll.
    I ran disk repair on permissions, that's all sorted out. I don't know what else to do to resolve the firmware update. Please help. Thanks!

    At the risk of sounding stupid.. how would I delete the download?
    And if I have a SuperDrive, which I do, why wouldn't the update apply to me and why would Software Updater have prompted me to download it in the first place?

  • Does anyone know how to solve: "Firmware update failure. Disk write error"?

    Hi all,
    Here is the list of all what went wrong and where I am now:
    1. My Ipod worked well
    2. I wanted to update it, you know, the normal thing with Itunes
    3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
    4. I took my external drive (where my music is) at work and tried again: same result.
    5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
    6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
    7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
    8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
    9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
    I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
    Thank a lot for your answer

    Hi Cyrille,
    Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • New Firmware update, computer much worse off

    Hi all, this is my first post, I just did the new Macbook firmware update today (November 14th), I was experiencing the problem that the update was supposed to fix, but not my Macbook is doing the problem worse (now when I flip the lid closed it won't come back from sleep), and my mouse (both trackpad and USB mouse) will only right click (no matter if I am right clicking or left clicking), I've checked the settings for my mouse and they are correct (in fact I hadn't changed them at all in the past month)
    Very irritating, anyone out there having a problem with this latest update? What should I do?

    Scratch the mouse problem (quite embarrassing) I had something sitting on my bluetooth keyboard which was out of site at the time, and it was holding the ctrl button down

  • New Firmware Update for Nokia N95 (RM-159 ) :Decem...

    Hello All,
    It looks like new firmware update is available for Nokia N95 basic model .
    Earlier Version of Firmware was : 30.0.015
    Now the latest available Firmware was : 31.0.014
    When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
    I will wait for 2 more days for official communication from Nokia....

    Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
    Somebody should shine a light on this FW, or nokia has
    done a lot of work for nothing!

  • WiFi Problems - TC to MP, since recent firmware update

    Hello,
    i found some threads about other people having trouble here, but nothing seemed to fit my situation.
    I have 2 Macs - a Mac Pro (Early 2008) and a MacBook (Late 2008). And a Time Capsule, which i purchased sometime between the Macs. Up to now, everything worked perfect, both machines were connected via WiFi to the TC. But since the recent firmware update, the MacBook works fine with the TC, absolutely no problems, but the Mac Pro (a bit longer distance) doesn't work any longer.
    This started on Friday (i don't use the MP daily), it was impossible to get a WiFi connection, tried re-entering connection data and so - no success.
    On Saturday, i used the cable to check the TC configuration, everything worked fine, and after fiddling around with the setup, i finally got WiFi working again.
    Sunday - MP was off all the day.
    Today - Just powered it up, no WiFi. When i disable and re-enable AirPort, it gets a connection for a second or 2, but then drops it. If i get a connection, i have a strong signal (all bars black), so signal quality isn't an issue. And before the update, everything worked fine, the only change is the firmware update last week.
    The MacBook doesn't have any issues, no matter, where it is located. I'm currently writing this post on it while syncing some home directory stuff with the MP (MB connected via WiFi, MP connected via cable).
    So what is this new problem? After damaging USB to complete unusability, Apple now continues with the WLAN features? What comes next? When will all this be fixed?
    Meanwhile, i think it was not the best idea to switch to Apple about a year ago. The continous quality drops get painful meanwhile. I wonder when my iPhone gets unusable (which also works fine with the TC, by the way
    ...Michael

    Hi again,
    okay. It really was the 7.4.1 firmware. This morning, i reverted to 7.3.2, did a full reset, reconfigured everything, and now my network works fine as it did before.
    It seems to be important to reconfigure the TC, as just downgrading the firmware didn't really help, while full reconfig with 7.4.1 also doesn't help.
    I now turned off the automatic search for new versions on the TC. I will be informed by the AP Express, which has no problems with 7.4.1 yet.
    Hope, Apple re-introduces quality control soon and doesn't make the customers be the beta-testers.
    ...Michael

  • Anyone NOT having problems with ITunes 8 and latest firmware update???

    I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

    Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

Maybe you are looking for