Firmware Updates for Westell 327w Router?

hi there!
just curious if Verizon ever updates the firmware for the "Westell 327w" wireless router, and if so, where to find it.)
Westell's website just says talk to Verizon about it...
no big deal, just like to keep my stuff up to date.)
thanks!

The other users that updated the 327W to the new firmware claim that it messed it up. They recommend that you stay with your current firmware right now.

Similar Messages

How do I install the firmware update for LinkSys E900 router?

Hi,
I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router. It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update. I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine. How can I install the firmware update?
Thanks, - Dave
Solved!
Go to Solution.

Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update. Just point to the .bin file and away you go. Make sure to hard reset the router and reconfigure it after you are done.

M20 firmware update for wps vulnerability

Can someone advise when Cisco will be releasing a firmware update for the Valet M20 router to address the WPS vulnerability problem (e.g. disable the feature, something which *should* have been incorporated into the router in the first place).
Thanks.

Cisco... does not care... about Valet people.
The most recent firmware was released in the 1920's, I believe. It's common practice in the technology sector as a whole to consider electronics as "legacy" devices after about 6 months to a year. Wish DD-WRT ran on this, your configuration choices are pretty much SSID, router's IP and the ability to enable or disable DHCP. Compared to open source firmwares like DD-WRT and Tomato... or even compared to other router firmwares (D-Link firmwares give a lot more control and access to advanced configuration settings-- if you can handle it). I think it's pretty clear that the intended market focus for these routers were... the users who... did not plug the power cord into the router because it said it was "wireless".
Uh oh, did I say that out loud? No... I typed it, though.
The hilarious thing about this is I work as a systems/network admin and have 20 years of experience... and this router gave me trouble when I just decided to be lazy and try setting it up using WPS and the setup program. What a disaster! I finally just did a hard reset and logged in via browser and did it the real way... but I found that extremely amusing, that by dumbing things down so much, it actually made the process (to me, at least) 10x more complicated!
Oh... I threw this one in place of my normal router because it has been acting really flaky lately... it has served its time and paid its dues, surely. I picked up the M20 on clearance for like $10 I think-- for this very purpose... to keep as a backup in my closet if my normal router decided to kick the bucket.
I'm online, so... I guess this Valet M20 is serving its purpose but the lack of configurability is just plain painful! You know what would be a great idea? For Linksys/Cisco to supply an alternative "advanced user" firmware that isn't concerned with giving users enough rope to hang themselves with. People like me and other users who know what they're doing will already know how to flash it and get going-- don't even bother with user guides and pleasantries. Not needed. Also not needed? The splitting headache that swap gave me. A "5-minute task" became a "45-minute chore". I did install the iPhone admin app and found it to be just as watered down.
It seems an odd thing to me that you'd add the option to totally change the SSID or password (something that would require you to update the configuration on all of your wireless clients), yet left out access to things that would be much more practical and useful from a smartphone-- like being able to view the logs-- I would actually find that very useful. I already know that it's a Valet M20. Could have skipped that. Now, being able to reboot the router without having to get up and go to the computer or have to go to the web admin page on my phone, strain to find that option on a page only coded for desktop display... that's useful. The guest enable/disable would be useful, too... if there were any guests here. For some reason, I can't get anyone to hang out... LOL. Ok, rant is finished, I was just testing the connection and ended up here after getting the latest firmware. Thought I'd take a moment to share my thoughts since I'm biding my time, waiting on someone at the moment. This post is an artifact and memorium of the time killed typing it up. Yeah, that's sort of a self-referencing, paradox-ish type thought, hmm. Ok, hah. Really leaving now...

Wrt310n firmware update completed but the router will not start!

I did a firmware update for my wrt310n because it was having to be power cycled twice a day! When I updated it said that it completed but when I tried to reconfigure it it would get stuck at "waiting for router" and when its not configured it did nothing. Help please?

Did you reset the router...after upgrading the firmware...if not then, Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
You can also try the different computer.

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings.

Any firmware updates for wrt160Nv2?

i was wondering if there have been any firmware updates for this router. right now my status is Firmware Version: v2.0.02.

Then Firmware on your Router is already the latest one i dont think you Router needs an Firmware upgrade.

I'm trying to download the firmware update for the WRT54G...

I'm trying to download the firmware update for the WRT54G version 6 router but I receive the error message that Internet Explorer is not able to open the internet site. It suggests that it is unavailable or cannot be found. I've tried accessing it numerous times with the same error. Any thoughts on this?

are you online through the router ?? if not , connect the computer directly to the modem and go to www.linksys.com/download to download the latest firmware for the router ..

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

How do i install firmware updates for time capsule?

How do I install firmware updates for time capsule?

If you are using the Lion or Mountain Lion operating system on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
A message will be displayed if there are any available updates. Click to update if that is the case.
If you are using the Leopard or Snow Leopard operating system......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, the click Manual Setup
Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

Hello Apple Support Communities,
I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
Here are the specs that the page requested me to find:
Model Identifier:          iMac10,1
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.52f9
Someone please help, this has been bugging me for a while.

I took all the precautions and asked all the questions,
Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
http://www.hddfancontrol.com/
BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

WHY DOESNT NOKIE POST MORE FIRMWARE UPDATES FOR OT...

I AM NEW TO THIS BOARD AND HAVE FOUND THAT NO MATTER WHAT I DO TO UPDATE MY NOKIA 6230i (FIRMWARE AND RADIO SOFTWARE)I MEET A BRICK WALL.
IT SEEMS NOKIA ARENT INTERESTED IN GIVING YOU SUPPORT ONCE YOURE PHONE IS ANY MORE THAN A YEAR OLD.
THIS TO ME IS VERY UNFAIR AS I HAVE SPENT A LOT OF CASH ON THIS PHONE TRYING TO UPDATE VISUAL RADIO USING THE DIRECTIONS PROVIDED WITH NO SUCCESS AS THESE DIRECTIONS DO NOT WORK AS I CANT FIND ANYWHERE TO DOWNLOAD THE THE NEW VISUAL RADIO WHILEST ON WAP.
THIS TO DATE HAS COST ME £75 TRYING TO FIND THE LINK.
ALSO I HAVE BEEN ASKING FOR THE FIRMWARE UPDATE FOR THE 6230i AS I SEE THIS AS BEING FAIR AS EVERY OTHER MOBILE THAT IS BEING POSTED CAN BE UPDATED OVER THE AIR AND THROUGH SOFTWARE UPDATE.
WHY CANT MINE AND MANY OTHERS.
EVEN IF NOKIA POSTED THE LAST RELEASED FOR EVERY MOBILE EVEN FOR THE OLD ONES I WOULD BE VERY GREATFUL .
MY NOKIA HAS A VERY OLD FIRMWARE V3.40 THIS NOKIA KNOWS IS FULL OF BUGS AND SHOULD BE HELD ACCOUNTABLE FOR POSTING THE FIXES UNTILL THERE ARE NO BUGS TO SORT WITHOUT EXCESS COST OR HAVING TO VISIT A RECOMMENDED REPAIR DEALER.
I WANT IT FREE JUST LIKE THE NEXT GUY SO NOKIA POST THE FIRMWARES AS SOON AS POSSIBLE AS I AM COMPLETELY FED UP WITH THIS FONE AND ITS BUGS.
YOURS SINCERELY
AN UNHAPPY CUSTOMER

First of all, please locate the Caps Lock key of your keyboard; all upper case text is hard to read, and traditionally considered as shouting. Of course, you may already know that, and intended to shout.
Anyway, most phones do not have the built-in support for do-it-yourself firmware updates.
For such phones your options are (if you think you need a firmware update):
- Take/send the phone to an authorized Nokia service/repair center, where the update can be done.
- Buy relativelt expensive flashing equipment and locate illegally distributed firmware files and try it on your own with that.
My advise is to go for the former rather than the latter option. The former should cost you anything (at least not for as long as the phone is under warranty & excluding what it takes for you to go there).
As to downloading "THE NEW VISUAL RADIO WHILEST ON WAP", I don't know what you mean by that. I don't know a 6230i, but either it comes with Visual Radio built-in or not. Any updates/fixes to it would come with a firmware update, but not over WAP.
Note also that you don't need the Visual Radio service to listen to FM radio channels, and most radion stations do not support the "Visual" bit at all (if they do, the support is indicated in the station directory in the radio app on the phone).

Where is the firmware update for my ipod touch

I recall that there was a firmware update for my 1st Gen Ipod Touch. I did not do it at the time, but would like to do the update now to the most current firmware available for my touch. I am now on version 2.2.1 (5H11) Can anyone tell me where I can find the newer firmware? Is there any benefits to the new firmware or should I just leave it as is?

Purchasing iOS 3.1 Software Update for iPod touch (1st generation) - http://support.apple.com/kb/HT2052
https://discussions.apple.com/thread/3009667

Remote Supervisor Adapter II SlimLine Firmware Update for TD100

According to Lenovo document 54Y6198 I should be able to go to http://www-947.ibm.com/systems/support/oem/td100.html and download the firmware updates for the Remote Supervisor II Slimline adapter we purchased for our new Lenovo TD100 server (Model 6429-18U). However, the problem is that NONE of the links work and NONE of the files can be downloaded all I get is a web page listing a 404 error (Not Found).
Naturally the adapter won't work without the proper firmware, please help!

Try now, it works. there have been some issues which are fixed.
Jan Solar
Product Marketing
(not a technical support)
http://blog.lenovo.com/author/jsolar/

Firmware Update for my blackberry 8830 world edition with Bell Canada

Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?

You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5.

How to run a firmware update for buffalo tech NAS

I downloaded a firmware updater for a Mac to run the install of a firmware update to a Buffalo Tech NAS LinkStation. Mavericks tells me it can't run this because it is from an unidentifed developer. Nice.. I need a workaround if that is possible.

Here you go:
http://support.apple.com/kb/PH14369

Firmware Updates for Westell 327w Router?

Similar Messages

Maybe you are looking for