Firmware updates. I've got the message!
Recently ran firmware updates for RAID card and Cinema display and worked fine.
But slightly annoyingly every time I start up I get the messages saying
Your firmware is up-to-date.
Your computer's Mac Pro RAID Card firmware is up-to-date.
This has been happening for a couple of weeks.
Open the Accounts pane of System Preferences, and if they're in the list of login items for your account, remove them.
(48909)
Similar Messages
-
When I tried to update my itunes I got a message srvice apple mobile device failed to start and retrying elicits the same message. What do I do?
The most complete resolution is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.
Welcome to Apple Discussions!
You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
http://www.macmaps.com/browser.html
As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
http://www.macmaps.com/macosxnative.html
which should answer most of your other questions. If you have further questions, please feel free to ask me.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public. -
I have a mid 2007 iMac. 2 GHz Intel Core 2 Duo, 4 GB 667MHz DDR2 SDRAM, OSX 10.9.5. I attempted to do the latest update and got the message: Start up disk is full. Delete files. How do I do that?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
Hi everybody, I need help.
I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
Thanks in advance for adviceDid you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup? I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device. The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.
-
When trying to do updates via App Store I got the message "Kan inte ansluta till iTunes Store" in english "Cannot connect to iTunes Store". How to solve this problem?
Efter att ha försökt att använda annat wifi fick jag samma problem dvs. kunde fortfarande inte göra uppdatering av mina appar. Jag prövade att ta bort flera stycken av dessa men det var ingen skillnad. På resa med ytterligare ett annat wifi lyckades det helt plösligt, vet inte varför. Får se om det blir samma problem nästa gång jag blir uppmanad att uppdatera appar.
-
I tried to update to the new ios 7 today. I have no phone now. I got the message "could not complete request. The network connection was reset. What is happening. What do I do now?
Apple's servers are probably very busy. You may want to wait for a little while before trying again.
-
thanks for yr reply
sofar that is clear
and indeed, after I
changed the details at my apple ID account
from the old Dutch credit card to the new Suisse credit card
when I wanted to update my existing apps on the iPhone, I
got the message that I can only use the Suisse Apps store.
But how does that work?? Can I still update my existing Apps ?? How can I make my iPhone connects to the Suisse App Store ??
thanks
Best regards
[email protected]HI..
I responded to you here > https://discussions.apple.com/message/18112516#18112516 -
I purchased my macbook pro 2nd hand and then purchased Lion online thru the apple store and today when I tried to update some of the software I got the message that it was corrupt. Can anyone help me?
Did the message say what was corrupt. It is not clear from your description of "...it was corrupt" what "it" is. Sounds like the download of Lion was corrupt. Download it again. Downloaded files sometimes get corrupted due to network connection glitches or interruptions.
-
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Does firmware update 7.1 break the Airport Extreme Base Station?
Does firmware update 7.1 break the Airport Extreme Base Station?
See Digg
http://www.jayhaynes.net/2007/04/donot_install.html
April 10, 2007
Do NOT install AirPort 802.11n Firmware 7.1
This Firmware 7.1 update for AirPort Extreme Base Station with 802.11n should definitely NOT be installed.
Here was my problem:
I used AirPort Utility 5.1 to install the update. It is automatic - launch the utility and it asks if you want to install the update. I said yes because I had problems getting two AirPort n base stations networking together to extend my range (I gave up finally and just used an AirPort Express to extend the range).
After the firmware update, some sites would not load at all (www.nytimes.com) and others took forever to load. And worse, I could not send any email from any of my IMAP accounts. It seemed to be a DNS problem.
I have two 802.11n AirPorts, so I finally went back to the other one (7.0) and everything worked fine. The Apple tech support guy offered to replace my broken (7.1) AirPort.
Foolishly, I wanted to make sure the problem was actually with the 7.1 update and not the AirPort itself. So I updated my second 802.11n base station with 7.1. And it casued the exact same problem (some sites not loading, no outgoing email).
The Apple tech (at this point I was speaking with a wireless specialist) put me on hold to test a few of his AirPorts to see if he could revert back to firmware 7.0 or (ii) install a clean version of 7.1 (in case the version on my drive was corrupted).
Unfotunately neither option was possible, which is a design flaw in AirPort Utility.
Apple is sending me two new AirPorts in 1-2 days, which is great service, but I will not be installing firmware update 7.1 again. Fool me once...
http://www.apple.com/support/downloads/airportextremebasestationwith80211nfirmwa re71.html
AirPort Extreme Base StationTurns out that the firmware 7.1 does not render the AEBS useless.
My problem was resolved when I turned off my DSL modem, the AEBS and the computer. Then restarted in same order going to the next one after the first is compeletly up and running. I had no problems whatsoever after that.
Seems that the firmware update makes the IPs 'stick' somehow. I would think that even a reset of AEBS might have done it but I never got to that stage.
All my computers came alive in no time.
I suggest Smith tries this. Simply reset the whole network. Ah yes, my cable modem has an internal battery, I needed to disconnect this too. Only then did the modem go into the 'acquiring' or 'distribution' mode. -
I tried to download with a redemption code and got the message: "your computer isn't authorized" -- how do I do that?
Quit Safari, launch it directly from HD/Applications/ instead; trash the old version 5.1 on your Desktop... it isn't working with the Safari 5.1.1 system frameworks, and wasn't updated due to not being in HD/Applications/
-
I installed iTunes 10.2.2. When I tried to open it, I got the message that iTunes needs to install Rosetta to open. It then appeared to download and and install Rosetta. When I try to open iTunes, the icon bounces but iTunes does not open. The icon has also changed from the usual iTunes icon. What do I do now?
I have a 2010 MBP15 which I do not use as much as my pc. When I do, I check for updates and I believe I updated iTunes to 10.2.2 a week or so ago. Since I still use iTunes primarily on my pc, I didn't bother firing up the updated iTunes on the mac.
Last week, when I actually started iTunes on the mac, I got the message that Rosetta needed to be installed. Like abefighter I stalled. I surfed the net, read this thread to get some hints as to w** was going on.
When I checked the system profile in the mac, I think it showed PowerPC for 'kind.' Surfing the Internet I found out Rosetta was something needed to help applications work on PowerPCs. But wait, since this MBP is an Intel, why would or should it be asking me for some stone-age plug-in that was never mentioned in all the previous updates for iTunes until now? Fyi, the iTunes icon on the dock had changed to what I think is an AppleWorks icon.
So, I assumed that the update that resulted in my mac was corrupted. At first I scoured for 10.2.1, thinking that the last version was a dud, but in vain, nowhere to be found. I gave up and settled for a fresh 10.2.2. I did a casual delete, without touching any of the related personal preference files in my folder and it now which works fine. I'm glad I didn't jump to install Rosetta; I read elsewhere about someone who actually went through with the Rosetta install that resulted unhappily.
Unless the mac in question is a PowerPC, I would doubt the need for Rosetta installation. -
I have a Macbook purchased in 2009. I am running Mavericks, which has caused several programs to stop opening (Calendar, Quicktime...) so I have been trying several things to fix it. One thing is to try to do a Apple Hardware Test over the internet. In order to do this I need to restart my computer while pressing the option and D keys.
When I did so I got the message "4403D". I had to hold the power button down to turn off the computer in order to restart normally so I can use it.
What does this mean? And how do I fix the programs?Can you provide the link of the website on which you are having problems ??
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
-> Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Logic won't start! I got the message "Logic Pro 9 did suddenly quit!
Hi.
I had the same problem with Garageband a while ago...
Now its time again!
When i used Garageband, i downloaded cubase on my mac. And after that when i was tryed to open Garageband i got the message "Garageband did suddenly quit" (Translated from swedish).
And now i installed Ableton Live Trial version and i got the same message "Logic Pro 9 did suddenly quit!
PS: I have uninstalled the Ableton Live (I think... if i did it the right way)
Help!!!
Info:
Logic Pro 9.1.0
Snow Leopard
Operative system: The newest xD *** do i know? :P
Thanks.
Message was edited by: bohusOk so i figured it out. I will explain if any one had the sam problem... Follow
Finder/Macintoch HD (Your Harddisk)/Library/Applications Support/Propellerhead Software/ReWire/And Delete MelodyneEssentialReWireDevice.plugin (8.4 MB)
Hope it will help.
Maybe you are looking for
-
Multiple pre-orders on a single receipt?
First time that I've pre-ordered multiple games at the same time. I thought the cashier would ring them seperately, since they are for different systems and different release dates. Instead, they were all rung on a single receipt in a single transa
-
Although Firefox is used by P-02E of DoCoMo, many problems are troubled recently. If it is going to see specific URL, it will force to terminate certainly. (Example) The logo of Yahoo Japan (and all other graphics file) http://k.yimg.jp/images/top/sp
-
Report on non conformed dimension
Hi All, I am using OBIEE 11.1.1.5 We have 2 facts and 4 dimensions out of which only 1 dimension is conformed. We have a report requirement of using the conformed dimension and filtering based on 2 non conformed dimensions and include the measure fro
-
Upgrade from CRM 5.0 to CRM 7.0 - ISA
Hi All, Currently we have CRM 5.0 implementing ISA applications, and soon we wil be upgrading to CRM 7.0. We have some customised ISA applications running on 5.0, so during this Upgrade process, what would be the techincal approach for the ISA applic
-
hello... i have a written code for retrieving mail from pop3 server...and its working fine except one problem....(if it is a problem).... when i retrieve mails i open outlook express and it again retrieves the same mails i have retirieved from my cod