Firmware Updates on Mac Mini Intel

I have a mac mini intel. Two firmware updates come up via Software Update:
- Mac mini SMC Firmware Update version 1.0
- Mac mini EFI Firmware Update version 1.1
I have tried to install both of these individually several times. Each time, after I double click on the icon in the Utilities folder I enter my password and choose "shut down". Each time, the system starts the process and never really shuts down. Instead, it hangs on my desktop screen. Eventually, I push the power button. Then, I hold the button down like the instructions say. There is a sound and then it reboots a second time and returns to the login.
The problem is that when I log back in, it says the update has not installed!
I'm using the original Mac Mini Intel (the higher cost version) and the OS is totally updated. I need to update the firmware so that my bluetooth headset will work properly.
Any suggestions?

04-Dec-2006
01:20 PM
salimfadhley wrote:
I have a Mac (Power PC) and a Linux PC. I cannot run "boot-camp" and I do not have any emulation software or a copy of Windows.
I do not have a Windows 2000 or Windows XP computer, and I was not planning on getting one. The only task I cannot do is run the update for my Nokia N80.
I wonder if Nokia are planning to release a "over-the-air" update for this phone? It's a pain that the update process requires such particular software.
I believe v4 of the firmware is downloadable via OTA. It may be network/firmware dependant though. It does mean you'll have to pop along to the local Nokia shop for this update or follow the instructions above.
I have full End User experience of:
5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90.

Similar Messages

  • Tiger Update Crashes my Mac Mini Intel

    I got a new Mac Mini and finally got it going though it was not easy to transfer from my eMac. But I prevailed. Then I made the fatal mistake of updating all that the Software Update software suggested. Now my brand new Mac Mini will not run at all.
    REWIND: I tried to update my eMac a couple of weeks ago to Tiger. I did that and ran Software Update and GUESS WHAT? It crashed my eMac so badly I had to reinstall ALL the Panther software.
    Did Microsoft buy Apple???

    I figured out the problem last night after a week of gnashing, grumping, and general anxiety. Hope this post helps others with a similar problem.
    I have a free Lexmark 1150 All-In-One printer attached to my Mac. Apparently Tiger DOES NOT like the Lexmark application that turns off the printer during Restart and Shutdown. The application is in Library/Startupwhatever folder and I just trashed the Lexmarksleep..app (whatever it is named - I'm at work and cannot remember the exact name) and erased it.
    Now my Mac Mini is back working like a Mac - PERFECT.
    fiat1969
    Mac Mini Intel Dual Core Mac OS X (10.4.6) Brand New
    Mac Mini Intel Dual Core Mac OS X (10.4.6) Brand New

  • Mac mini Intel Updated to 10.4.10 - Won't boot if Airport turned on

    Just updated my Mini to 10.4.10. I have two locations set up - one wired, and one wireless. If the location is set to use Airport, the machine will not boot. It may get to the desktop, but usually hangs before the dock makes it onto the screen. I need to do a Safe Boot, and change the location back to Wired for it to boot. After that, it works perfectly fine until I try wireless again, resulting in the same problem. Taking cues from some of the threads here, I downloaded and applied the Combo update, but it didn't help. It worked just fine under 10.4.9, and is completely reproduceable under 10.4.10. I tried turning off my Linksys wireless router to see if talking to it was giving Airport trouble, but even with the router powered off, the mini still hangs.
    Saw some other threads about people having difficulties after 10.4.10 using HDMI to an HDTV, which I am also using, so maybe there's some combination of DVI->HDMI monitor and Airport???
    Mac Mini (Intel Duo)   Mac OS X (10.4.10)   DVI->HDMI->Vizio GV47L HDTV

    Curiously, of the 3 users I have with Intel minis who updated to 10.4.10, none have boot problems with Airport enabled. None are using any unusual adapters etc, but the systems are behaving correctly none-the-less.
    However, there are obviously some users who do have problems, and just to be clear, since this is a user-to-user support forum, Apple do NOT read these threads. Well, to be more accurate, the forum hosts do, but solely from the standpoint of 'policing' content, and from time to time other staffers may, though not for the purpose of identifying technical issues. It is expected that users wishing to report a problem contact Apple directly to do so, and for all those suffering this anomaly (and others like it should they occur) it cannot be stressed too much that if the answer cannot be found here from another user, contacting Apple directly to make them aware of the problem is the best way forward.
    In many instances, these issues turn out to be caused by issues that already pre-existed in the system before an update was installed, but in other instances where there is a genuine issue with an update and a specific piece of hardware or software or in certain operating circumstances, often the only way Apple will know is if users report it to them directly so they can then examine the details of each reported case to help identify the cause and then release a fix if it is necessary.
    A useful resource for reporting and troubleshooting issues like these is http://www.macfixit.com/ though it's interesting to note that they don't seem to indicate this particular issue has been reported to them. They do, however, have a comprehensive guide on reinstalling MacOS at http://www.macfixit.com/article.php?story=20070709083546267 for those who want to downgrade from 10.4.10

  • Symantec AntiVirus LiveUpdate hangs my mac mini intel

    Hello. I have an intel mac mini running mac osx 10.4.6 I
    installed norton antivirus corporate edition (site-licensed
    at my university) and all worked well.
    That is, it did until I installed the firmware update on
    the mini. Since then, when I try to run live update, the
    system hangs, and all I can do is move the cursor around
    the screen with the mouse. Can't click on anything, can't
    break out with the keyboard, nothing. Need to reboot.
    I can't find any information on this on the symantec site.
    crDo you guys know anything about it?
    Based on another thread I read here, I looked at crontab
    (crontab -l), and it said "no crontab".
    Thanks very much
    Mac Mini duo intel   Mac OS X (10.4.6)  

    I don't know what is causing your issues, but in the meantime you can get the latest virus definitions from sites such as MacUpdate (just type "norton" in the search field).
    FYI definitions for Norton Antivirus X 9 will also work with Norton AV X 10.
    BTW there have been two firmware updates for Intel-based Mac minis (Firmware Update 1.0.1 and SMC Firmware Update). Which one did you install before the issue came up ?

  • HT1338 Why can't i update my Mac mini above 10.5.8

    Why can't i update my Mac mini above 10.5.8?

    See:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Brand New Mac Mini (Intel 2.53 320HD 4gb - January 2010 - new Airpot Extrem

    I purchased a new Mac Mini Intel Duo 2.53 320HD 4gb and a new Airport Extreme, new iWorks, wireless Mouse and keyboard, ipod touch 8gig and have a iphone 3gs 16g already few months old. My Mac Mini keeps trying to install something in System/Library/CoreServices and halts permission check until Disk Utility saying that it has been altered and will not repair. I did notice in that directory everything about Apple Remote Desktop, including ARDAgent / AppleVNCServer.bundle which contains curtainlock, kickstart, remote desktop.incs, RemoteDeskoptAgent, lock.jpg, networkUser.tiff, Lockscreen, lockscreekLeopard386, VNC Gues, sshHelper, writesettings, VNC PrivilageProxy, AppleVNCServer, Screensharing, Upgrade User, UserAccountUpdate, WorkflowServerRunner, Ticket Viewer and so on. My new Apple Extreme Dual Band, paid $179 for it, shows another base station when trying to re-set to factory settings that doesnt match mine, and I have no other apple stuff in my apartment. Also, before I can even enter the password and set it up, the Amber solid light turns green, and thanks me at the end for setting up my wireless with a usb printer. I don't have, nor ever setup a printer, no in my sharing, and under Airport at the top of my screen listing all the networks in my area also has a second section listed Devices - and it shows a hpsetup under my computer's airport.
    Would buying techtools deluxe help fix this problem? Or norton Security for mac? or use the PGP Corporation Whole Desktop security Apple recommends to encrypt everything and re-install my operating system after I do a full erase with a one zero clean on both empty and disk02 - Machintosh HD?
    Also my iphone 3gs is acting strange. It says the AT&T firmware is 5.11.7 and 3.1.2 (7D11) but the actual model number has changed from whatever M..L/A to now just M...LL (no /A).
    Thanks for any help.
    Rick
    [email protected]

    Actually, he has 2GB of RAM and a 2.26 GHz processor.
    I'd suggest trying it. Worst thing that could happen is your system is too sluggish to use, in which case you reformat the partition (or remove if you want) and install a different, more compatible version of Windows. But personally, I could see it working well for you. However, if you're using an Apple Wireless keyboard and Mighty/Magic Mouse, you may run into some problems with pairing, however, this is a Boot Camp driver problem and can be fixed fairly easily.
    I can't see it creating any problems, I'm running Windows 7 32 bit on my Mac mini with only 1GB Ram and a 1.66 GHz processor. And it's running really smooth. I should also note that Windows 7 uses far less resources than Vista, thus it runs a little better on slower machines than Vista did.

  • How to use a mac mini intel with 30" cinema display

    Arg, I just bought an Apple 30" cinema display to go with my new Mac mini intel, but oops the 30" apple cinema display has to use a dual link dvi card. Anyone know how to get out of this horrible situation without buying another new computer.
    Thanks!

    If you want to run the LCD at it's high 2560x1600 resolution, then you have absolutely no option whatsoever than to buy a PowerMac or MacBook Pro. Otherwise, you will be able to run the panel at 1280x800 with the Mac mini, which wouldn't make much sense though.

  • Mac mini intel shut down problem !! please help !!

    hi !
    following problem, mac mini intel single core does not shut down, shut down process last 10 min and more (bluescreen, black wheel running) but does not shutdown at all!!
    When I log off my user and then press the shutdown button at the login window, it shuts down normally.
    Any ideas???
    Feeling like being in windows times???
    please help
    thanks
    tobias

    Good catch. I would never have though of that since I eagerly anticipate each chance I get for a clean install.
    I much prefer to get a clean start and consciously change the things I need to work - often I find that the defaults really are better and would otherwise be stuck in habit...

  • I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.

    I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.

    You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11.  The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
    The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
    The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.

  • Mac Mini Intel Core Solo 1,5GHz won't turn on

    Hi at all!
    I'm in a trouble with a Mac Mini Intel Core Solo-based.
    Well, when I connect power cord, after a while, Power LED self-turns on (without powering on the Mac), but Startup Chime isn't played, there aren't no video signals on screen, Optical Drive mechanics isn't initialized and no Hard disk Drive noise is audible.
    I can hear only (if I put my ear on Mini's body) a bit Fan Noise (and a bit air flow on the back).
    If I stay-pressing power button for 4 seconds, Mac turns off. It I re-press that button, Mac turns on again. Finally, if I long-press the power button, Mac DON'T perform PMU reset (with classical speed flashing of power led, Long beep and Startup Chime).
    What can I do to fix this problem?
    Thanks very much to all readers!

    You're right!
    I wrote PMU instead of SMU.....in fact, mine is an Intel-based Mac, and PMU is present only in PowerPC Architecture.... ^_^
    Sorry for my expression error.....:)
    While I'm writing..... I thought that, in my Self-repairing operations on the Mac Mini, I've also replaced the internal 3V battery (because, with a multimeter, I'd can verify that battery voltage was only 1,75V instead of near 3V). After that, I left Mac turned off for a certain interval of time (I was busy in other personal activities). So, when I turned on again the Mac (after the complete reassembly of the entire computer), the Startup chime was played and the Mac beguns to work.
    Is possible that, in the Mini - Intel Core Solo 1,5GHz, a low internal battery can cause problems like in the old dear iMacs G3 ????

  • HT1338 when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

    when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

    Open the General tab of the Finder's preferences and set it not to be displayed on the desktop. Alternatively, if it's a disk image or external disk, just drag it to the Trash.
    (83576)

  • How to install mac os (PPC) on an external hard drive, through a mac mini (intel) ?

    Hi all,
    Let me explain:
    -  my iMac G5 iSight has a dead HDD and dead superdrive: No way to get it to run
    - I have the installation disc of Tiger (PPC)
    - I have an external HDD in FW
    - I have a mac mini (Intel)
    How to install the Mac OS PPC on the external HDD with the mac mini (Intel)  ?

    Hello,
    You must use the Intel iMac as a Firewire Optical drive.
    How to use FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    http://en.wikipedia.org/wiki/Target_Disk_Mode
    Put the PPC Install Disc in the Intel iMac.
    Put the Intel iMac into FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    Boot the G5 iMac holding the Option/alt key, & see if the Install Disc in the Intel iMac shows up as a boot choice.

  • Hitachi PJ-TX300 projector and Mac Mini Intel Core 2 Duo?

    My PJ-TX300 projector is hooked up via its PC connector to my Mac Mini Intel Core 2 Duo, via a DVI to VGA adapter (which came with the Mini from Apple) plugged into the Mac mini. I cannot get a clear screen picture at any resolution: there is always ghosting. Can you advise me?

    Ghosting would typically implicate the video cable. Where did you get it? It sounds like you may have a very cheaply constructed VGA cable and a better one is needed.

  • Dual Powermac G5 vs Mac mini Intel Duo

    I'm sure this has been discussed already, but I would some more input on this.
    I am looking to upgrade to a faster Mac. I am currently running a G4 1.25 DP with 2Gigs of RAM. It's a fine machine, but I would like to take advantage of some of Apple's more powerful units. Anyway, I am considerering a Dual Processor 2.0 G5 Powermac with about 2.5 to 4gigs of RAM, or my other choice is one of the new Mac mini Intel Core Duo models with RAM maxed and a faster larger HD.
    My question is--what machine would give me a better performance running Universal Apps, such as Logic, Soundtrack Pro, ect...? Obviously, the Apples are all going to way of the Intel and I have been hearing great things about the new Intels. The Mac-mini has limited expandabiltiy and one Firewire port, but runs Intel. What to do? I may consider the Imac G5 core duo as well.
    Any feedback would be appreciated.
    Thanks, Randy

    well here' my experience...
    i recently sold a dual 1.8 G5 with 2GB RAM. reason being simply to get rid of it while it was still worth something. on top of that, it was really large, loud and put out a ton of heat. i bought the Core Duo mini with a GB of RAM as a sort of temporary machine until the next Intel "Pro" towers come out. i've been using it for about a month now for Logic Pro, GarageBand, Ableton Live and Reason and soon my SoudTrack Pro Universal disks will be here as well. i was really concerned that the system would feel slow coming from the G5 but i can totally recommend this machine with confidence as it feel and performs as fast as (and sometimes faster than) by dual G5. i'm talking when using Universal binaries of course. these Intels are fast. the mini is a silent, snappy little machine. there are a few things i miss that will eventually prompt me to buy a tower such as:
    limited internal storage options - i believe the largest 7200RPM hard disk you can put in the mini is the 100GB from Seagate. of course, external Firewire and USB storage is always an option.
    the limited graphics card could be an issue for some. it doesn't seem to directly affect audio performance but just knowing that it's using your hard RAM is a bit unsettling.
    i miss FireWire 800, even though the G5 had serious slow-down issues when writing to fw800.
    i miss using two displays.
    having said all that; the speed, quietness and cool running temperature of this mini is enough to outweigh any negatives. i notice zero speed decrease from the dual g5 and cost me about a third of the price. it will make a great temporary workstation for me and when the next towers come out it will make a great livingroom entertainment system and perform node duties over gigabit ethernet. don't hesitate. it's a great system.

  • Should I update my Mac Mini to Mavericks???

    Hi,
    I have a late 2012 Mac Mini which I purchased mid 2013. It is running OS X 10.8.5 (12F45) (Mountain Lion I believe) and I am able to upgrade for free to OS X 10.9.5 Mavericks. I have read many review comments for Mavericks and they seem to be very mixed as to if it is good or bad.
    I want to update my Mac Mini but I can not find any specific information on if the upgrade will work fine for a Mac Mini as most questions and answers are more specific for a Mac Book or iMac.
    I am very much a noob at all this so your help (and understanding) would be very much appreciated .
    Cheers.

    Based in my experience with a very newly acquired new late 2012 mac mini, I would not update.  I already had an older mac mini that ran perfectly under Snow Leopard.  And indeed it still does run perfectly under 10.6.8 and indeed Windows 7.
    But there have been continuing annoying issues with Mavericks.  E.g. the dock disappears without reason  As for email, the new mail program is dire - keeps reverting to conversation mode, and when BT changed me over to the new servers in the UK this week - used by millions here in UK) - the IMAP account parameters are so automated that Apple just default to the old servers that don't work.  There is no obvious way to define the new servers.
    OK there may be a workaround but it's a farce.  The web is awash with complaints about mail - some suggesting using Thunderbird.
    I have 50 years IT experience - a real geek - so how do less experienced users get on.
    So I am running my new mac mini permanently on Windows 7 under boot camp 5.  It just works - unlike Mavericks.
    Incidentally the new mac mini hardware is great - a lovely balance of design, portability and power.
    Both Apple and MS have surrendered their product development to marketing.
    I wish I could put Snow leopard on my second mac mini but there seems no sensible way.

Maybe you are looking for