Firmware Upgrade and Battery Life?

Since the firmware upgrade on my Macbook in early February the fan appears to be running at full speed all the time and battery life is crap! Has anyone else noticed this? Is there a fix/workaround available please?

Sounds more like an app stuck processing that shouldn't be....does happen from time to time. Behing hot means it is constantly processing.
To fix:
Try a reboot (described below).
Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
You may also wish to read this tread about reboots and odd application behavior.
http://discussions.apple.com/message.jspa?messageID=5851978#5851978
For me, 2.1 works great.

Similar Messages

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Updated to OS 10.7.3; fan runs constantly and battery life dropped to under 2 hours when 100% charged. How do I get back to 10.7.2, I don't have a backup prior to this upgrade. This is a newer Macbook Pro 13", no modifications.

Help! This new version of Lion is making me miserable. The fan runs constantly, the computer is hot and battery life has dropped to under 2 hours on a fully charged battery. I updated yesterday, nothing but misery today. Even running the mail program alone make the fan run like I have everything open. Using Pages, iPhoto, and iTunes simultaneously makes the computer blistering hot.Yesterday, I could use all three without any trouble. Any suggestions to either jettison 10.7.3 or how to fix without any expense? I haven't modified this computer at all, it is as it came from the box in August 2011: 2.3 GHz Intel Core i5, 4GB 1333 Mhz DDR3.

I updated to Lion 10.7.3 and started noticing my fans running on high all the time and my battery would drain 2-3x faster. I was going to take my computer into an Apple store until I found this thread. I did the SMC reset by shutting down my computer, plugging it in, and then pushing down shift+control+option while also pushing down the power button. Nothing happens on the screen and the computer did not turn on. I then released all the buttons at once after holding them down for 10 seconds.
After that, I simply turned my computer back on and everything seems to be working fine. The fans are not blasting anymore. I have a newer MacBook Pro where I can't access my batteries. The SMC reset may differ for other types of laptops.

I have a i phone 5s model number 1533 its getting little heat and battery life not longer is it a battery problem plz help me...

I have a i phone 5S model number 1533 its getting little heat and battery life keep not longer is it a battery problem please help me...

What troubleshooting have you done so far?

EFI Firmware Update for Retina Display and Battery Life

I recently installed the EFI firmware update (1.0) for the macbook pro with retina display and have found my battery life has reduced from what used to be 5 hours or so to maybe 2 hours. Furthermore, I have noticed that my computer runs significantly hotter than it used to. Has anyone experienced this and know why this is the case? I would like to restore my battery life.

I've noticed the same thing as well. Any word from Apple?

After updated firmware of E71 /Battery life is poo...

After I updated the firmware of my E71 to 200.21.118 version, my phone lack of battery life, I think the problem is mail for exchange version 2.09.158 that have conflicts with the new firmware. After the updated, my phone is always hot and my battery is no longer than 12 hours of use (before at my use 36 hours), I turn the mfe to manual and fix the problem.
Can any body helpme with my problem?.
Regards,

have you performed the three-finger hard reset after upgrading to the latest firmware version? this is often the source of problms, as giving the phone a clean slate to work with will most likely solve these battery issues. remember to backup all your data first to memory card and to computer using Nokia PC Suite as a .nbu file. after hard reset, restore everything back to your phone using the .nbu file. to perform a hard reset, turn the phone off then press the green call key, the 3 key and the * key all at the same time, then press and hold the power button.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

After iOS 8 update wifi is so slow and battery life is much worse

After installing iOS8 on my 5s the wifi and 3G has slowed remarkably down. The facebook app now doesn't refresh unless I turn the phone off and on again and safari takes an age to load it's pages. Also the battery life is even worse than before. I used the maps yesterday for 1.5 hours for a trip and it took me from full battery down to 10% in that time. This is really irritating me now, will it be fixed?

Like you I have a 4S running on iOS 8, and since the upgrade to 8 my battery drains like crazy. I'm not experiencing the wifi issues that some of the other posters are having, but the rapid battery drain seems to be a common issue. I keep hoping Apple will address this with their updates for iOS 8, but it always seems to be overlooked.

One User's Story: iOS 7.1 and Battery Life on iPhone 5

I've been reading the messages from folks that have experienced shorter battery life after upgrading to iOS 7.1. It does appear that there is a real problem with some iPhone 5S models. Some of those users are reporting a shorter battery life along with warm iPhones (when the iPhones weren't doing anything) and repeatedly "coming to life" with the lockscreen slider multiple times after being put asleep.
In my case, the day after upgrading to iOS 7.1 I noticed that my iPhone 5 (not 5S) went from about 90% battery to 55% battery overnight--with no apps open. And since iOS 7, I've disabled background app updates, disabled location services for all but about 4 apps, disabled motion, etc. I also tend to never leave any apps open when I'm done for the day. Anyway, during the second night, my phone went from 40% to about 35%. I suspected that iOS 7.1 may have affected the battery calibration but perhaps not the actual life between charges.
I then turned on the phone, set it to not sleep, and let it completely use up the battery charge and to turn itself off. It took a very long time--more evidence of a calibration issue. I then completely charged the phone. Since then, it appears that not only is the battery calibration correct again, but the actual battery life might be a little longer after iOS 7.1. I'm now seeing about an 8% to 10% drop in battery charge overnight which is what I had before iOS 7.1.
I'm not saying that users who are reporting decreased battery life are wrong. I can only report my own experience.

I love all the Tips out there to save Battery life, turn this off turn this down when the bottom line is you shouldnt have to turn anything off or down because those things are why you bought an Apple iPhone, how about Apple fixes there crap right the 1st time instead of ripping us off,
And another thing Apple should reveal there iPhone 6 on what the heck there going to release , whats with all this bullcrap all the time that its a big secret....
Im really getting sick of this Company...

IPod Touch and Battery Life

Hello guys, just question for you.
I think that soon I'll go get myself a new iPod and still can not decide between the iPod touch 64 gigs and the Classic.
I am looking for a device where I can store all my music and has a good battery life. Now the Classic would be great as I would not need to upgrade for a few years ... the only worry is that it's a bit too fragile, due to the presence of an hard drive and not flash memory.
On the other side I wonder if the iPod touch would resist for a week without charging it....I'm the kind of user who often flickrs tru the list looking for other songs etc and also most of my songs have been ripped at 320kbs so that means the player has to fish into the memory more often
Any advice? Thanx in advance

Hi Antonio,
I've had a classic (original 160gb) for a few years now. It's taken a few knocks over time... nothing hardcore/abusive, but still works fine.
Apple say that you get 36hours of music from a classic and 30hours from a touch
I listen to my classic on my way to/from work, and a few hours of the day at work. I can get a whole week out of one charge easy.
I recently bought a touch with some gift vouchers from a work bonus. The usability of a touch is far superior to a classic. Movies, games, apps, wi-fi are all amazingly good, but drain your battery. A charge usually lasts 2-3 days, but I do use my work wi-fi to check facebook & eBay sometimes (banned on work computers)
I'd say touch trumps the classic, but if your music is all 320k, your going to fill 64gb fast!!! One thing to bear in mind is it's almost new Apple time. With the advent of iPhone OS4, there are many rumours and speculations, all of which are totally unfounded, but it is widely assumed that June/July will yield a new iphone, and possibly a new touch. There is no way to know for sure what the specs will be, but the new touch may come in greater sizes than 64gb

5.1 Upgrade and Battrey Life

The 5.1 upgrade resulted in reduced battery life in my 4S and my iPad. However, the worst hit was to my phone. I was happy with the original performance an that has now been cut by at least 25%. Is there a new fix on the way or something I can do to help return my iPhone Bach to its 5.0 performance level?

I am experiencing the exact same concern. I do not feel I am a heavy user of my iphone on any given work day... before upgrading to 5.1 my iphone 4s had great battery life. My iphone easily lasted from 6am wakeup and news reading, through a 10 hour work day of occasion email, facebook and text activity, and beyond into the evening with reasonable web use and a bedtime around 10 pm.
I now find that after I check my email and news in the morning I notice the battery has dropped so I plug it in before I leave... only to find after my 10 hour work day I am down to warning battery levels under 20%!! And if I want to use my phone when I get home I have to charge it again. This is extremely disappointing.
I have tried turning off Wifi and location services with no marked improvement. My e-mail is the only app that I allow to push notifications.
I am very interested in a fix.

Updated new iphone 4s and battery life is poor

Since I upgraded my new iphone 4s the battery life has become really poor. As soon as its unplugged its lost life!
Is this going to be fixed?

Depending on the settings for your social media apps, your usage can very. If, for example, Facebook is checking the status to often, your battery is more likely to be drained. Same for mail and other push/fetch services.
Sometimes it helps to delete the account and set it up again, there have been cases in which those apps got stuck trying to connect to their servers.
If you restored the phone from the latest backup you made, did you reset the phone by holding the sleep and home button for at least 10sec, until the Apple logo came back again?

Memory upgrades and battery scratches

Good afternoon all!
I couldn't find where to email Lenovo directly so unfortunately I'm going to have to post here.
I'm probably going to catch some flak for this but hey ho, so heres the thing, I bought two brand new Lenovo 3000 N100's 5 years ago, all good, they both came with a 512MB SO-DIMM and since I wanted more memory I bought 2x1GB SO-DIMM's which I put in mine and put the other 512MB in the other one giving mine 2GB of RAM and my mum's 1GB of RAM.
Doing this was easy peasy, unscrew *ONE* screw and the flap just slides out of the two slots on the opposite side of the flap to the screw. Job done.
Scroll forwards 5 years and times have moved on... a lot and it seems like we apparently need to MASSIVELY over engineer things now.
So I bought three Lenovo 3000 G570's, all good stuff and all came with 1x2GB and 1x4GB for a total of 6GB, all good but me being me and a Firefox tab whore, what with RAM being so awesomely cheap I decided what I was going to do was get 8GB (2x4GB) SO-DIMMS (Corsair), take out ALL my existing memory, put in the new Corsair 2x4GB SO-DIMMS, take out the 2GB SO-DIMM from the one I got my sister and put in my now spare 4GB SO-DIMM giving me 8GB of RAM, my sister 8GB of RAM, my mum sticks with 6GB of RAM and I have 2x2GB SO-DIMM's left over spare.
SO, my sister and mum have already unboxed theirs and all is well, I unboxed mine, flipped it over and there are no less than *FOUR* screws holding the flap in now, granted there is just one 'flap' covering the CPU/RAM/HDD/WIFI/etc so okay fair enough, it's a big 'flap' after all.
So I undo said four screws and I should just be able to slide the panel out now right? Wrong, obviously four screws were deemed not nearly enough to keep it in place, so there are now tabs which are actually clipped in around pretty much all sides of this panel.
Well okay this can't be difficult right? Wrong. Now I'm a firm believer in the notion that if it won't budge don't just keep applying more and more force until something breaks. So I'm looking all over this thing, testing it gently from different sides to see if I can prise it open but it's becoming quickly apparent that I'm expected to BEND the panel so I can get the tabs out around the sides!
MASSIVELY over engineered and COMPLETELY unnecessary, were the FOUR screws not already holding it in place okay? It certainly seemed that they were? Okay so I need to bend the panel to get the tabs out but I'm guessing it's a reasonably easy thing to do not requiring much force right? Wrong. So it became quickly apparent then I'm going to need quite a bit of force, the problem is it's the kind of force that requires a flat head screwdriver and despite my best efforts it was impossible not to mark the bottom of my nice shiny brand new laptop! But that's not the end of it.....
So I've undone the four screws and I've managed to bend the panel and prize out all that tabs as gently as possible all whilst doing my best to try not slip the screwdriver underneath the panel taking a nice stab at the motherboard/memory/CPU/wifi/etc underneath because that would just *really* make my day, so the four screws and numerous tabs would be it right? Wrong. It appears that there is something underneath the panel STILL holding on, "more tabs?!" I cry in despair as my engineering family background cries out "WHY LENOVO GODS? WHY?!!! Does this panel need to survive a thermonuclear explosion?! Does it need to stay on whilst being driven over by a tank?! WHY?!".
So I'm trying everything, gently wriggling it this way, wriggling it that way, lifting it this side, lifting it that side, EVERY conceivable way of removing the final tab underneath I tried.... and failed. I pour through all the manuals again, maybe I've missed something? Maybe I'm just being completely thick (it's not unknown to happen)? But no, the manual makes it sound as easy as breathing so I give it one last try, I lift the panel putting more and more force through it until eventually BANG it comes off.... and I sit there staring.... laptop on the table.... the panel in my hands.... and the now broken tab.....
link to image
....wonderful.
With sigh I proceeded to install the new memory and replace the panel which now ironically goes on and comes off again SIGNIFICANTLY easier now the tab underneath has broken off and do you know what? The panel doesn't seem to have lost any of it's ability to stay in place? Funny that.
The other funny thing is that when I go to 'upgrade' my sisters laptop, the panel comes off EASILY! Maybe during assemble mine was done differently? Maybe the tolerances on mine just made it too tight to come off easily but with another sigh I go to put the battery in my new laptop so I can check all is well and what do I find?
The battery has scratches all over it:
link to image
All three brand new laptop boxes had the Lenovo seal on them so the retail store couldn't have opened it and my sister's and mum's laptop's were all fine?
So dear Lenovo, I love buying your laptops, I've bought five already, I'd buy again but would you be so generous as to send me a new panel and battery? I'd really appreciate your help.
Regards,
Benji
image(s) >50k converted to link(s).

hey LondonBenji,
awesome post that looks like a TARDIS... "Bigger on the inside". Anyway, sorry to hear on what had happened, I suggest giving our support team a call via
Tel. +44 (0) 870 608 4465
Mon-Fri 9am-6pm
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Question about full cycle charges and battery life

So I've had the new iPad since day 1 and absolutely love it, though recently I've noticed that my battery life doesn't seem to hold up as well as it has in the past. I've done three full cycle charges since getting it however during my latest one I accidently brought along my iPod wall charger and not the one that comes with the iPad. My iPad was fully discharged and I plugged it in assuming that in the 7 hour window I had that it would be fully charged within 5 hours, but this was not the case due to me having the wrong charger. After about 7 hrs of charging it was only at around 60-70% so I had to unplug it, bring it home, then plug it in once more using the correct charger. Probably a fairly obvious question but does this not count as a full cycle charge because I unplugged it? Should I perform another full cycle charge even though this most recent one was not even a week ago. I know you're supposed to completely discharge your battery as few times as possible so it worries me having to do it again so soon.
About battery life, I've noticed lately that my iPad battery seems to be depleting quicker than normal, and was hoping that perhaps this was caused by being overdue for a full-cycle charge which I may have flubbed as seen above. I'm aware of a majority of the little tips and tricks to prolong battery life however I'm not so knowledgeable on the "do's and don'ts" of charging the actual iPad so any information on that would be helpful. I should also note that unfortunately I accidently left by iPad in a hot car for a little over an hour and was tremendously devastated knowing what this can do to the battery, so could this be the main cause for a seemingly weaker battery?
Thanks for any feedback!

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

New 15" 2.2 GHz is heating up very hot and battery life is very short

I just bought a new 15 in MBP and the thing heats up so hot I can't hold it on my lap and all I am doing is sufing the web and downloading apps for my iPad. I am using a 3G USB modem and with a full charge am only getting an hour and a half of battery life max! Is this normal? Or should I send this thing back to the store? Thanks for any info you can give me.

this happened to me a while back, even after replacing my battery. what might be happening is that there is a print job waiting in the que which could be hogging up a lot of CPU (why this happens is beyond me)
anyway, the way i fixed my issue was going into the activity monitor and sorting the processes by CPU load. if you see something taking up 95% of it, try and quit the process. my battery life jumped back up to 3 hours after that

Slow i7 MacBook Pro startup and battery life issues

Hi Everyone,
My i7 2.66GHz 15" MacBook Pro with 8GB of RAM does a couple of things that worry me
1. The battery life is poor, 127 Charge Cycles, 6 months old. I'm sat on Chrome with one window open and it's reading 3hr 16 min on 83%
2. The startup into 10.6.5 is painfully slow. It seems to load up the menu bar at the top and hang mid flow, just before the battery status and time remaining appear.
Any ideas?
Thanks in advance! Mike
Here is a copy of my startup log:
Jan 8 00:49:06 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_manager): Bug: launchdcorelogic.c:6487 (24208):22
Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_server): Bug: launchdcorelogic.c:6487 (24208):22
Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_start): Bug: launchdcorelogic.c:6487 (24208):22
Jan 8 00:49:12 localhost blued[15]: Apple Bluetooth daemon started
Jan 8 00:49:12 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting
Jan 8 00:49:12 localhost configd[14]: network configuration changed.
Jan 8 00:49:12 MikeMBP15 configd[14]: setting hostname to "MikeMBP15.local"
Jan 8 00:49:12 MikeMBP15 configd[14]: network configuration changed.
Jan 8 00:49:12: --- last message repeated 1 time ---
Jan 8 00:49:12 MikeMBP15 mDNSResponder[18]: Adding registration domain ibodge.members.mac.com.
Jan 8 00:49:14 MikeMBP15 configd[14]: network configuration changed.
Jan 8 00:49:21: --- last message repeated 1 time ---
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 18: uname: command not found
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 20: [: -lt: unary operator expected
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 31: [: -lt: unary operator expected
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 35: [: -lt: unary operator expected
Jan 8 00:49:24 MikeMBP15 com.rogueamoeba.hermes[57]: unknown action: update
Jan 8 00:49:25 MikeMBP15 com.apple.launchd[1] (com.rogueamoeba.hermes[57]): Exited with exit code: 1
Jan 8 00:49:28 MikeMBP15 com.autodesk.backburner_start[60]: /usr/discreet/backburner/backburner: line 16: whoami: command not found
Jan 8 00:49:28 MikeMBP15 com.autodesk.backburner_start[60]: Must be root to run.
Jan 8 00:49:28 MikeMBP15 com.apple.launchd[1] (com.autodesk.backburner_start[60]): Exited with exit code: 1
Jan 8 00:49:31 MikeMBP15 bootlog[48]: BOOT_TIME: 1294447746 0
Jan 8 00:49:31 MikeMBP15 awacsd[24]: Starting awacsd connectivity-32 $Rev: 907 $ (Sep 29 2010 19:07:17)
Jan 8 00:49:31 MikeMBP15 awacsd[24]: Connecting AWACS client: ibodge hello.connectivity.me.com
Jan 8 00:49:32 MikeMBP15 com.apple.usbmuxd[29]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit
Jan 8 00:49:32 MikeMBP15 VMware Fusion 332101[82]: Starting VMware Fusion:
Jan 8 00:49:32 MikeMBP15 com.vmware.launchd.vmware[55]: VMware Fusion 332101: Starting VMware Fusion:
Jan 8 00:49:38 MikeMBP15 WDSmartWareD[53]: Daemon Start -- User registered
Jan 8 00:49:40 MikeMBP15 repair_packages[84]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:49:40 MikeMBP15 com.vmware.launchd.vmware[55]: 2011-01-08 00:49:40.719 repair_packages[84:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:49:40 MikeMBP15 repair_packages[84]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:49:40 MikeMBP15 com.vmware.launchd.vmware[55]: 2011-01-08 00:49:40.723 repair_packages[84:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:49:42 MikeMBP15 com.vmware.launchd.vmware[55]: Verifying files from package 'com.vmware.fusion.application' on '/'.
Jan 8 00:49:42 MikeMBP15 com.vmware.launchd.vmware[55]: Finished verifying files from package 'com.vmware.fusion.application' on '/'.
Jan 8 00:49:50 MikeMBP15 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: UUID: Unable to open /dev/mem: No such file or directory
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Adapter: en1, Inactive
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Failed to read SCproperties for key: State:/Network/Global/IPv4
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Stopping bridge for:
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Started bridge for 2, en1
Jan 8 00:49:52 MikeMBP15 com.apple.launchd[1] (0x1005020b0.anonymous.vmnet-netifup[117]): Failed to add kevent for PID 117. Will unload at MIG return
Jan 8 00:49:52 MikeMBP15 com.vmware.launchd.vmware[55]: Started network services
Jan 8 00:49:52 MikeMBP15 vmnet-bridge[105]: Preferences changed called
Jan 8 00:49:52 MikeMBP15 com.vmware.launchd.vmware[55]: Verifying and re-installing files from /Library/Application Support/VMware Fusion/thnuclnt
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Starting Aladdin USB daemon
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: /Library/StartupItems/Digidesign Mbox 2/Digidesign Mbox 2:start
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Starting Digidesign Mbox 2 Configuration Service
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: PACESupport - launchd already started us
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Requesting load of /System/Library/Extensions/DigiDal.kext.
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: /System/Library/Extensions/DigiDal.kext loaded successfully (or already loaded).
Jan 8 00:49:54 MikeMBP15 configd[14]: network configuration changed.
Jan 8 00:49:54 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
Jan 8 00:49:54 MikeMBP15 vmnet-bridge[105]: Started bridge for 0, en1
Jan 8 00:49:57 MikeMBP15 coreaudiod[157]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: Sat Jan 8 00:49:57 MikeMBP15.local coreaudiod[157] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:49:57 MikeMBP15 coreaudiod[157]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: coreaudiod: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Jan 8 00:49:57 MikeMBP15 loginwindow[37]: Login Window Started Security Agent
Jan 8 00:49:57 MikeMBP15 WindowServer[90]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:49:57 MikeMBP15 com.apple.WindowServer[90]: Sat Jan 8 00:49:57 MikeMBP15.local WindowServer[90] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:50:08 MikeMBP15 SecurityAgent[159]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Jan 8 00:50:09 MikeMBP15 loginwindow[37]: Login Window - Returned from Security Agent
Jan 8 00:50:09 MikeMBP15 loginwindow[37]: USER_PROCESS: 37 console
Jan 8 00:50:09 MikeMBP15 com.apple.launchd.peruser.501[172] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.folabs.proremote[197]): open("/var/log/ProRemoteServer/out.log", ...): No such file or directory
Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.akamai.client.plist[199]): Bug: launchdcorelogic.c:4139 (24208):13
Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.folabs.proremote[197]): open("/var/log/ProRemoteServer/error.log", ...): No such file or directory
Jan 8 00:50:16 MikeMBP15 com.folabs.proremote[197]: /Library/Application S
Jan 8 00:50:16 MikeMBP15 com.folabs.proremote[197]: upport/ProRemote/ProRemoteServer.conf
Jan 8 00:50:17 MikeMBP15 ProRemoteServer[197]: Listening for MIDI: /var/tmp/com.folabs.proremoteserver/socket
Jan 8 00:50:17 MikeMBP15 ProRemoteServer[197]: Listening for Remote: [8183]
Jan 8 00:50:19 MikeMBP15 com.apple.launchd.peruser.501[172] (com.apple.Kerberos.renew.plist[193]): Exited with exit code: 1
Jan 8 00:50:19 MikeMBP15 ServerScanner[189]: Preference says we shouldn't scan
Jan 8 00:50:22 MikeMBP15 StatusMenu[205]: Attempting to monitor /Library/Application Support/WDSmartWare
Jan 8 00:50:22 MikeMBP15 StatusMenu[205]: Monitoring /Library/Application Support/WDSmartWare
Jan 8 00:50:23 MikeMBP15 MediaLinkHelper[212]: MediaLinkHelper: Starting up…
Jan 8 00:50:23 MikeMBP15 Rowmote Helper[214]: Est <AsyncUdpSocket: 0x317cc0> (5843)
Jan 8 00:50:26 MikeMBP15 netsessionmac13d7a2d[199]: * __NSAutoreleaseNoPool(): Object 0x608460 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:26 MikeMBP15 netsessionmac13d7a2d[199]: * __NSAutoreleaseNoPool(): Object 0x608490 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:26 MikeMBP15 MediaLinkHelper[212]: DeviceManager: Initializing local device: NRMediaServerDevice…
Jan 8 00:50:26 MikeMBP15 MediaLinkHelper[212]: RootContainer: Root container initialized!
Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRAlbumArtTranscoder…
Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRDirectTranscoder…
Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRJPEGTranscoder…
Jan 8 00:50:28 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRMEncoderTranscoder…
Jan 8 00:50:28 MikeMBP15 MediaLinkHelper[212]: DeviceManager: Registering remote device class: NRPlayStation3Device…
Jan 8 00:50:29 MikeMBP15 MediaLinkHelper[212]: MediaLinkHelper: DeviceManager ready.
Jan 8 00:50:31 MikeMBP15 VMware Fusion Helper[213]: Could not connect the action buttonPressed: to target of class NSApplication
Jan 8 00:50:32: --- last message repeated 3 times ---
Jan 8 00:50:32 MikeMBP15 pkgutil[224]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:50:32 MikeMBP15 [0x0-0x16016].com.vmware.fusionDaemon[213]: 2011-01-08 00:50:31.999 pkgutil[224:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:50:32 MikeMBP15 pkgutil[224]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:50:32 MikeMBP15 [0x0-0x16016].com.vmware.fusionDaemon[213]: 2011-01-08 00:50:32.002 pkgutil[224:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100b1c960 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e419c0 of class NSURL autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e53020 of class NSURLRequest autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e42580 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e51380 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e52970 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e54350 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:51 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100b788c0 of class NSHTTPURLResponse autoreleased with no pool in place - just leaking
Jan 8 00:50:51 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e54540 of class NSCFData autoreleased with no pool in place - just leaking
Jan 8 00:51:28 MikeMBP15 Apple80211 framework[178]: Scan() error 16 (Resource busy)
Jan 8 00:51:28 MikeMBP15 Apple80211 framework[178]: __performScan() EBUSY, sleep 1 sec, try again
Jan 8 00:51:46 MikeMBP15 [0x0-0x1b01b].com.apple.Safari[229]: Canceleld; 0; Empty 1
Jan 8 00:52:23: --- last message repeated 162 times ---
Jan 8 00:51:46 MikeMBP15 [0x0-0x1b01b].com.apple.Safari[229]: Canceleld; 0; Empty 1
Jan 8 00:52:25: --- last message repeated 6 times ---
Jan 8 00:52:25 MikeMBP15 System Preferences[236]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 8 00:52:57 MikeMBP15 System Preferences[241]: dlopen_preflight failed with dlopen_preflight(/Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane/ Contents/MacOS/AkamaiNetSession): no suitable image found. Did find:\n /Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane/Contents/MacOS/Ak amaiNetSession: GC capability mismatch for /Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x7fff7101c490 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x10210bcd0 of class NSURL autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e3fcf0 of class NSURLRequest autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x10210bcd0 of class NSURL autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e45460 of class NSCFDictionary autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e43e50 of class NSError autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e46e60 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e45100 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e1cf30 of class NSConcreteMutableData autoreleased with no pool in place - just leaking
Jan 8 00:55:10 MikeMBP15 [0x0-0x20020].com.apple.Safari[244]: Canceleld; 0; Empty 1
Jan 8 00:55:11: --- last message repeated 317 times ---
Jan 8 00:55:11 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: [0108/005511:INFO:/b/build/slave/chrome-official-mac/build/src/chrome/app/break pad_mac.mm(89)] Breakpad disabled
Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class CrApplication is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.
Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class NoOp is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.
Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class TaskOperation is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.

There seems to be a lot of unanswered questions floating around here.
Its kind of scary seeing some of these "issues" and not seeing any answers.
I just spent 3 g's on a 2011 mbp, and I am really hoping all the great things that I've learned about Apple still rein true. Those are the only reasons I bought one.
My startup is very slow as well.

Firmware Upgrade and Battery Life?

Similar Messages

Maybe you are looking for