Firmware upgrade cannot be installed on my 42UL863

Hi!
My TV does not find the any new firmware on the net, I comes back with the message that there is no any new firmware. I have 19.3.49.227 30 Aug 2011 but there is 19.3.61.7 for UL863G from feb 2012 on the toshiba site..
When I extract and load this on a USB stick (i tried several) upgrade seems (after Yes click) to start, the "upgrade" popup shows up but the progressbar does not change and it comes back after a while with something like "upgrade file cannot be found"
Any ideas?
Cheers!

Hi
Here is another [How to update the firmware|http://fget.dl.toshiba.com/manual/procedure/10002/procedure_of_downloading.pdf?fromPid=%2Ftsb-dtv%2FNA%2FGB%2FEN%2F42UL863G.html&f=procedure_of_ downloading.pdf]
Not all USB Thumb drives will work for Firmware Upgrading. The USB
Thumb Drive should be formatted as a FAT or FAT16 fi le system and NOT FAT32. If the
Firmware Upgrade does not work try a different USB Thumb Drive.
Copy the extracted downloaded upgrade file(s) including directories if present to the blank
USB Thumb Drive. Now follow the instructions in the Installation Instruction.

Similar Messages

Cannot connect to internet after airport firmware upgrade

I bought a new Airport Extreme Base Station, hooked it up, and it worked just fine. Then it asked for a firmware upgrade, which I installed. Now the base station will not connect to the internet. I've tried re-booting my cable modem, re-starting the base station, etc. No luck. Pending an answer to this question, I re-installed my prior Airport Extreme base station, and it worked just fine. It wants me to do a firmware update, but I'm understandably reluctant.
Thanks for your help.
Bob

Thanks Chris. One of posts in this thread mentioned the possibility of a corrupt file in the operating system. I reloaded 10.7 using a flash drive I made and then did a hard reset of my Airport Extreme. That solved the problem. I hope this helps.
Don

Firmware upgrade interference?

Is it possible that a firmware upgrade file can interfear with a printer causing it not to print? Can it also interfear with the computer getting those automatic updates for windows xp? This computer is wired to the router. I was told you can delete the file once the firmware upgrade worked. How do you do that? Thanks for any help that anybody can give me.

It is a well known fact that if a firmware upgrade does not install correctly or completely it may cause various problems. This LINK will show how to properly upgrade your firmware. When you flash it DO NOT refresh the routers settings with a back up copy from before the firmware upgrade. You must reconfigure the complete router settings for the type of internet connetion they are using.
To delete the .bin file (or any other file) you can right click on it then delete it.
Message Edited by Ikester on 12-02-2007 10:54 PM
Richard Aichner (Ikester)

AcrobatUpd11009.msp patch cannot be installed

Hello all,
Another month, another Adobe patching headache! So I have read the Enterprise Administration guide many times, and I have been deploying and patching Adobe Flash,Reader and Acrobat for years now. Usually it goes smoothly, but eventually I always run into an issue. This time my problem is this:
Last month, I created a new Acrobat XI AIP from the bas 11.0 media. I patched this AIP to 11.0.07 (quarterly)
I then installed Acrobat on many clients using the command line option 'PATCH=AcrobatSecUpd11008.msp' to "chain" the OOC patch into my install, without actually applying the OOC to my AIP.
Today, when I try to apply the AcrobatUpd11009.msp to these same clients, I am getting the error in the log file: "PATCH SEQUENCER: minor upgrade patch \\server\share\AcrobatUpd11009.msp is not applicable."And error in GUI: "The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade".
Can someone out there tell me what I did wrong here? I believe I can uninstall 11.0.08 then run a full install of 11.0.09 from a new AIP, but that seems unnecessary.
Thanks in advance!

Still no answer on this?    We have the same problem on all our computers. Seem that after installing 11.08 update, something isn't updated because the 11.09 patch thinks it is still 11.07.   (yes, going to help/about shows version 11.08)
Here's what the patch spits out with the /lv switch:
=== Verbose logging started: 10/8/2014 15:52:15 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\windows\System32\msiexec.exe ===
MSI (c) (C8:D0) [15:52:15:285]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C8:D0) [15:52:15:285]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C8:94) [15:52:15:285]: Resetting cached policy values
MSI (c) (C8:94) [15:52:15:285]: Machine policy value 'Debug' is 0
MSI (c) (C8:94) [15:52:15:285]: ******* RunEngine:
           ******* Product: {AC76BA86-1033-FFFF-BA7E-000000000006}
           ******* Action:
           ******* CommandLine: **********
MSI (c) (C8:94) [15:52:15:285]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (C8:94) [15:52:15:301]: Cloaking enabled.
MSI (c) (C8:94) [15:52:15:301]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C8:94) [15:52:15:301]: End dialog not enabled
MSI (c) (C8:94) [15:52:15:301]: Original package ==> C:\windows\Installer\88c84096.msi
MSI (c) (C8:94) [15:52:15:301]: Package we're running from ==> C:\windows\Installer\88c84096.msi
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: Uninstall Flags override found.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: Uninstall VersionNT override found.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-1033-FFFF-BA7E-000000000006}'.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (C8:94) [15:52:15:332]: MSCOREE not loaded loading copy from system32
MSI (c) (C8:94) [15:52:15:332]: Opening existing patch 'C:\windows\Installer\4fefa807.msp'.
MSI (c) (C8:94) [15:52:15:332]: Original patch ==> C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp
MSI (c) (C8:94) [15:52:15:332]: Patch we're running from ==> C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp
MSI (c) (C8:94) [15:52:15:332]: SOFTWARE RESTRICTION POLICY: Verifying patch --> 'C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp' against software restriction policy
MSI (c) (C8:94) [15:52:15:332]: SOFTWARE RESTRICTION POLICY: C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp has a digital signature
MSI (c) (C8:94) [15:52:16:143]: SOFTWARE RESTRICTION POLICY: C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp is permitted to run at the 'unrestricted' authorization level.
MSI (c) (C8:94) [15:52:16:143]: SequencePatches starts. Product code: {AC76BA86-1033-FFFF-BA7E-000000000006}, Product version: 11.0.07, Upgrade code: {AC76BA86-0000-0000-BA7E-7E8A45000000}, Product language 1033
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: verifying the applicability of minor upgrade patch {AC76BA86-A440-FFFF-A440-7A8C40011008} against product code: {AC76BA86-1033-FFFF-BA7E-000000000006}, product version: 11.0.07, product language 1033 and upgrade code: {AC76BA86-0000-0000-BA7E-7E8A45000000}
MSI (c) (C8:94) [15:52:16:143]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (C8:94) [15:52:16:143]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: minor upgrade patch {AC76BA86-A440-FFFF-A440-7A8C40011008} is applicable.
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: verifying the applicability of minor upgrade patch C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp against product code: {AC76BA86-1033-FFFF-BA7E-000000000006}, product version: 11.0.07, product language 1033 and upgrade code: {AC76BA86-0000-0000-BA7E-7E8A45000000}
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: minor upgrade patch C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp is not applicable.
MSI (c) (C8:94) [15:52:16:143]: SequencePatches returns success.
MSI (c) (C8:94) [15:52:16:143]: Final Patch Application Order:
MSI (c) (C8:94) [15:52:16:143]: {AC76BA86-A440-FFFF-A440-7A8C40011008} -
MSI (c) (C8:94) [15:52:16:143]: Other Patches:
MSI (c) (C8:94) [15:52:16:143]: Unknown\Absent: {AC76BA86-A440-FFFF-A440-7A8C40011009} - C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
C:\windows\Installer\88c84096.msi
MSI (c) (C8:94) [15:52:16:143]: Product: Adobe Acrobat XI Standard - Update '{AC76BA86-A440-FFFF-A440-7A8C40011009}' could not be installed. Error code 1642. Additional information is available in the log file C:\Users\x.xxxxxxxxx\Desktop\v.
MSI (c) (C8:94) [15:52:16:143]: Windows Installer installed an update. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.07. Product Language: 1033. Manufacturer: Adobe Systems. Update Name: {AC76BA86-A440-FFFF-A440-7A8C40011009}. Installation success or error status: 1642.
MSI (c) (C8:94) [15:52:16:143]: Note: 1: 1708
MSI (c) (C8:94) [15:52:16:143]: Product: Adobe Acrobat XI Standard -- Installation failed.
MSI (c) (C8:94) [15:52:16:159]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.07. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1642.
MSI (c) (C8:94) [15:52:16:159]: MainEngineThread is returning 1642
=== Verbose logging stopped: 10/8/2014 15:52:16 ===

Unable to install OfficeJet Pro 8000 firmware upgrade BZM1FN1006BR

My OfficeJet Pro 8000 A809n has the original firmware, 0842BR. My understanding is that the upgrade to 1006BR will address some issues I'm having with paper handling and network connectivity.
When I use the HP Download and Install Utility (DAIU), it downloads the firmware download utility (HP Officejet Pro Firmware - OfficejetPro8000_R1006BR_ENG.exe) to my hard drive. However, when I use the "Install" feature, I get this error:
"Firmware Download Utility has stopped working A problem caused the program to stop working correctly. Please close the program."
I've tried to run the software directily from my hard drive as well but it gives the same results. Some have reported that the issue may be related to running firewall software on my laptop (Lenovo W530 with Windows 7 64-bit) but I get the same problem when I disable Symantec Endpoint Protection.
I would appreciate any help in resolving this issue!

Hello there
I have some more suggestions for you! I would first suggest printing out a test page, see the below image for instructions on how to print out a quality page. I ask you to try this to see if the printer will produce a test page from the unit itself (without involving the computer). Basically, this makes sure the printer is in good working order before we continue software troubleshooting. If this page prints, continue the steps below the image, if not, let me know!
Also, please let me know some more about the paper handling and network connectivity problem you have been facing. Ex: Does the printer loose it's wireless connection? Will it not pick the paper and feed the paper through?
Source
Software troubleshooting if the printer printed a quality page fine:
Run the Microsoft Fix it tool here, to uninstall the printer: Fix problems that programs cannot be installed or uninstalled
Restart the PC.
Perform a Clean Boot again and restart the PC afterwards.
Disable any firewalls and anti-virus.
Run the installation again.
Happy Wednesday!
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I install my Firmware Upgrade

I have a befw11s4 v4 router. I have downloaded the need firmware upgrade but I can't find instruction on how to install it. It downloads as a .bin file.

There's a much better reference that you could follow. Go to linksys.com/kb, look for the answer id 557.

How do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS x 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

how do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS X 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

Retail Leopard disc looks like this;
(The disc itself has the same logo). If the one you've got is grey it simply won't work.
Given the retail and second hand prices of Leopard (usually some on Amazon MP), you'll probably find it cheaper to go directly to Snow Leopard, although there could be software updates and printer driver problems that could nullify the difference.

Cannot open install assistant. I get this error message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Pleas

How can I downloade a trial of Adobe Elements 12?
I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.

Hi alposer,
Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
Regards,
Rave

Adobe upgrade error : The upgrade patch cannot be installed..."

Hi,
I work in an office and while I was trying to patch up some computers that have Adobe 7.0 Pro (others have 8.0 Pro), I received the following message
"The upgrade patch cannot be installed by windows installer service because the program to be updated may be missing, or the update patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch"
I would like to mention that I used the check for update option and did not manually download the patches. Also, this problem seemed to occur on computers where adobe was not registered...
Any comments and suggestions will be appreciated.
Thanks

Be sure to install the updates in order from the current version, unless the info on the update says otherwise. The updates are available on the download>updates part of the Adobe site, with comments of order.

Why every time when im going to install games that cannot be installed and asking for newest version of iphone software, how can i upgrade newest version of iphone software?

why every time when im going to install games that cannot be installed and asking for newest version of iphone software, how can i upgrade newest version of iphone software?

Plug your phone into your computer running iTunes. Click on the phone in the left pane of iTunes. Click the "Check for Updates" button on the right.
If you have a 3G, the highest you can go is 4.2.1.

I just purchased OS X Mountain Lion Upgrade. When I went to install it is says "Os X Mountain Lion cannot be installed on Macintosh HD" please help!

Just purchsed upgrade OSX Mountain Lion. Went to install and it says "OSX cannot be installed on Macintosh HD" Why?

Hi,
If you bought the iMac in 2010 it should be supported indeed, however be aware that the information refers to the manufaction date which might be different than the purchase date.
Please verify the following information:
Click the Apple icon.
Click About This Mac.
Click More Info.
What is the listed Model Identifier?
You may identify the exact model by comparing it with the Model Identifier below:
http://support.apple.com/kb/HT1758
Now go back to your Desktop, click the Go menu and select Utilities.
Open the Disk Utilitiy.
Select Macintosh HD from the left pane.
You may find the Available space listed in here.
As well, what it the listed Format within the same screen?
Shlomi

HT201364 I tried to download OS X Mavericks v10.9.2 into my iMAC purchased on June 25, 2007 and upgraded to Snow Leopard OS X10.6.8 When I tried to download Mavericks OS X, the message came up that it cannot be installed in my computer. Why?

I tried to download OS X Mavericks v 10.9.2 into my iMAC purchased on June 25, 2007 and upgraded to Snow Leopard 10.6.8 When I tried to download OS X Mavericks v 10.9.2 into my iMAC, the message came up that it cannot be installed in my computer. Why?

Because there is a flaw in the App Store that gives you an alert you can never ever get rid of telling you to download Mavericks, even though when you click it then tells you your machine is too (I have to say 'darn' here because Apple automatically astersiks out the first word I used that also begins with d and is four letters) old. So you have to live with that little "1 update available" alert, though in reality, you cannot install it. You can imagine that either it is a sinister plot to wear away at you to buy some new hardware, even though yours is working just fine, or that it is a programming error Apple just doesn't care enough about to correct.

Will the Software Update to 10.4.7 install firmware upgrade for SuperDrive?

Will the Software Update to 10.4.7 install firmware upgrade for a SuperDrive?
I have a Mac mini and I've just let the Software Update run as needed, but I am confused by the number of Apple update downloads listed.
I don't believe I need them, when I just use Software Update?
Seems like a simple question, but I was on Windows for the last 10 years.
Thanks,
--Todd
Mini Mac OS X (10.4.7)

Believe Software Update.

"Mac OS X cannot be installed on this computer" used upgrade DVD up-to-date

I'm using an OS X 10.5 Leopard "Upgrade DVD" I bought with the up-to-date program when I bought a 2007 Macbook Pro (3,1) with Tiger bundled.
I tried to use it on my PowerBook G4 500 MHz (PowerBook 3,2), but it gave me the message:
"Mac OS X cannot be installed on this computer"
My upgrade DVD looks like the retail version (aside from the "upgrade DVD" text), and it doesn't have any text explicitly suggesting that it's a restore DVD for any specific model. Can I still assume this is effectively a retail DVD?

Came with 2007 Macbook Pro (3,1) implies that it can't be use with PowerBook G4 500 MHz (PowerBook 3,2). That violates the terms of use. Additionally, it's machine-specific, as described in http://support.apple.com/kb/HT2681 If you want to put Leopard on the PB, buy the retail version.

Shaman - cannot re-install, unresolvable dependencies after upgrade

after the most recent pacman upgrade, i cannot re-install shaman. error message: unresolvable dependencies pacman <3.3. does shaman need to be updated before it can be installed now? any workarounds? or recommendations for a pacman front-end? (i use pacman & yaourt from bash and shaman both, but having a gui to work from is sometimes more convienent for somethings). i have arch on two other machines that upgraded with the same result.
thank you in advance for any help,
rg
Update: it's a problem on Chakra, too http://chakra-project.org/bbs/viewtopic.php?id=1187
in the meantime i've been trying to compile shaman versions from aur, git etc., but getting a couple errors, debug, debug, debug...
Last edited by oorollergirloo (2009-08-05 23:45:45)

we had a little snafu when archlinux-extra released their split packages. suddenly all dependencies were broken because the split pkgs didn't "provide" the whole kde modules anymore but just it's part (which is of course fine and the way to go), which resulted in two of our devs emergency-rebuilding our whole repo yesterday ^^ I don't know whether i686 is done yet, but x86_64 is already done (but the packages are in kdemod-testing)
just follow this link for x86_64 and this link for i686 to find out how you should configure your pacman for the moment.
(oh and we can't build shaman either for the moment, pacman 3.3 seems to have broke something in shaman with the new libalpm. our dev should be working on it)
cheers
Phil

Firmware upgrade cannot be installed on my 42UL863

Similar Messages

Maybe you are looking for