"firmware upgrade failled" ZEN NOMAD FIRE p

Hi there?"Firmware problem" happened at the beginning. After trying all the rescue mode options, I then tried to change and install a new disk by using on of the solutions explain at?www.nomadness.net.Well the problem still maintain: when i connect the NOMAD the rescue mode menu appear straight away but when I tried to reload OS with a newer version (last one), always the same message "firmware upgrade failled". My windows media player is 9 version and I?m running win xp. Anybody helps me??RegardsJA

SSR wrote:
There may be hardware limits that prevent these players from using subscription music, such as a secure realtime clock. Also this petition could probably be extended for all the flash players (whether capable or not).
But remember the Xtra and Touch got PFS support and I dont think they were designed with a secure clock in them.... so based on that flash players could have PFS support

Similar Messages

Firmware upgrade for zen mi

<DIV align=center>firmware upgrade for creative ZEN MICRO. HOW ?
<DIV align=center>
<DIV align=center>i have downloaded the creative software upgrade program but didnt know how to us it. Can any one teach mi how to use the program so that i can update my zen micro software. Currently my zen is using the old software just thinking of changing to the new software as my friend say it is better then the old one . Help mi please !! thankxz....:robotsad:

The upgrade process is listed on the download page (click "show details"). Does this help, and if not what specific problem do you have?

Firmware upgrade on Zen Sl

I would like to install the new firmware on my Zen Sleek to upgrade to 2.0.03.
Unfortunately, both the skinny paper manual, and the more detailed CD-ROM manual don't explain how to do this.
I did try to reset the Sleek by pushing a paperclip into the base and pressing the 'play/pause' button. I never got the option from the player to upgrade the firmware. Instead, it simply went back into the 'now playing mode'. I also downloaded the executable from creative.com that supposedly contained the WMP0 and new Firmware. When I ran this, however, no options appeared to permit a firmware upgrade.

Thanks in advance.

Robert

Basically plug in ur MP3 player. Download the firmware off the internet and double click onit with ur mp3player pluged in. Thats all there is to it.
I own Zen Touch 20gig, Sennheiser MX400
OK, thats what I tried the first time.
a) player plugged in;
b) downloading the upgrade from creative, to wit:
Creative Software Suite for PlaysForSure-enabled Creative Zen Sleek Players (43.87 MB) 9 Sep 05
c) clicking on the icon that was placed on my desktop;
d) answering all questions the upgrade wizard asked as 'yes'
I'll try the process one more time, in case I missed something.
Robert

2.00.12 Firmware Upgrade for Zen Mi

In trying to upgrade the firmware of my Zen Micro to version 2.00.2 to use PlayForSure / MTP software, I get the following message: "An application is interfering with the flash program. Please close all applications and all Explorer windows before proceeding". I have no applications or Explorer windows open, however. I have tried this on my Windows XP machines at home and at work and get the same error.
Any ideas about how to do the upgrade? I got the Zen Micro specifically for its PlayForSure capabilities. If I can't use it, I am returning it. I will also write a letter to PC Magazine about the problems, despite it getting an Editor's Choice rating.

Starting from scratch... you connect your Micro to the dock, MediaSource starts, you exit MediaSource, presumably the Micro doesn't show as docked, you start the firmware upgrade... correct?
Correct
Can you then detail the *exact* error you get?
There isn't an error as such, but when the player reboots (which it has to to install the firmware) Mediasource starts again as it thinks the Micro is docked again, when i close it down (Mediasource) it continues to upgrade the firmware until it says "rebooting player" then it does nothing, it doesn't reboot the player it just freezes.
What firmware upgrade are you trying to apply?
I'm upgrading from .02.05e to 2.0.2.0
Thanks for the help!

PlaysForSure Firmware upgrade for Zen Nano/Nano P

i think that it would be absolutely awesome if us nano/nano plus owners could listen to the suscription service music like Yahoo Music Unlimited and Napster to go. I want creative to come out with a firmware upgrade for the nano to make this possible. If you want this firmware upgrade, please sign.

SSR wrote:
There may be hardware limits that prevent these players from using subscription music, such as a secure realtime clock. Also this petition could probably be extended for all the flash players (whether capable or not).
But remember the Xtra and Touch got PFS support and I dont think they were designed with a secure clock in them.... so based on that flash players could have PFS support

Some WMA/DRM files won't sync after firmware upgrade on Zen Touch

I downloaded an eaudio book from my library, which grants a 2 day license. Prior to upgrading the firmware (to the latest available) on my Zen Touch, I was able to upload this book and play it while walking, etc.
At the same time, I was able to upload several other books I had downloaded and licensed. All are WMA/DRM.
After upgrading the firmware, I was able to resync some of the books I'd downloaded to my Zen Touch. Several, however, yield error messages--no matter how I try to upload them (WMP, Creative MediaSource, Zen Touch Media Explorer). All refuse to let me upload.
These books previously uploaded/played just fine. Note: they still play fine using WMP and Creative's software. But, it's a bit difficult to lug my desktop around when walking/running through the woods.
Any idea what the problem might be? All MediaSource says is:
<IMG src="http://herb.thetysons.org/images/CMC-error.jpg">
WMP0 tells me that "an unknown error" has occurred. Neither event is significant to make it to the system's application event log.
Any ideas on why these files--which could be tranferred before--can't be transferred now? The licenses are still valid, and the file format is identical to those that transferred without incident.

OK, my update. After reading the recent responses (thanks!), I performed the following experiments.
1) Reverted to the original v2.0 via factory restore, relinked to the Mac. ATV immediately copied over my entire library (one movie, lots of music) from the Mac, because I have iTunes checked marked for Automatic Sync ("iTunes automatically chooses the audio and video to sync, etc.").
*I consider this to be normal and expected behaviour.*
2) Downloaded and installed the 2.1 update (again...). After reboot the ATV was still on my network and still linked to my Mac. However there was no longer any media content on the ATV (as before).
*I do not consider this to be normal, expected behaviour. Nor, for that matter, is wiping user content acceptable.*
3) Cancelled and relinked ATV to Mac. As soon as the linking code was entered, automatic sync started. Only the one movie was copied, but no music.
*I do not consider this to be normal, expected behaviour.*
4) When that sync was completed I went and checked all the songs in one album in iTunes as a quick test, then sync'd again. That song was promptly copied to the ATV.
Progress!
5) Checked all songs, initiated a new sync and they're being copied as I write.
Success!
So v2.1 requires music to be manually selected in iTunes in order for automatic sync to work. Anyone not spot a contradiction in terms? Furthermore that was certainly not the case in software versions prior to 2.1, nor was this change communicated in any way I'm aware of to the user.
My conclusion is that this is either a bug, or else sheer thoughtlessness on Apple's part.
But my sincere thanks to those who've helped me to restore proper function to the ATV (well, fingers crossed), a device that I've become very fond of.
Neil

Write a Vista firmware upgrade for Zen Micro to Make Upgrading Simple. Not XP upgra

please just write a vista compatible firmware update for the zen micro. don't complicate matters, by telling us to download this: http://us.creative.com/support/downloads/download2.asp?MainCategory=23&Product=0795&dlcentr ic=9304&Product_Name=ZEN+Micro&filetype=4&OSName=W indows+XP first, run in XP, so that it could be used in vista. this is an oxymoron solution. maybe this does not register in your mind, but not all of us have 2 computers or have dual booting systems. this is just a plain lack of regards for your existing customers needs. you want to make this transition to be as difficult as possible for people stuck in this operating system upgrade limbo.

Zen_Micr0_User wrote:
please just write a vista compatible firmware update for the zen micro. don't complicate matters, by telling us to download this: http://us.creative.com/support/downloads/download2.asp?MainCategory=23&Product=0795&dlcentr ic=9304&Product_Name=ZEN+Micro&filetype=4&OSName=W indows+XP first, run in XP, so that it could be used in vista. this is an oxymoron solution. maybe this does not register in your mind, but not all of us have 2 computers or have dual booting systems. this is just a plain lack of regards for your existing customers needs. you want to make this transition to be as difficult as possible for people stuck in this operating system upgrade limbo.
I don't know man but that firmware has been around for years. Why didn't you upgrade? i also have a micro but did not have a problem since i updated the firmware like 3 years ago.Message Edited by rasstar on 05-04-20070:28 PM
Message Edited by rasstar on 05-04-200705:37 PM

How can I Change firmware so that Zen Nomad Xtra will recogniz 250gb hd.

Message Edited by FrJimT on 02-22-2009 03:22 [email protected]

You may want to read this? http://www.anythingbutipod.com/forum...ad.php?t=33598

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

Nomad Zen extra jukebox Firmware upgrade for Naps

I am sure that this has been posted before however, I am very keen to find out when this upgrade is available for my 30G jokebox?
Cheers!
Steve

This is the long-awaited Zen Xtra firmware upgrade; all current discussion about it is in the sticky at the top of this forum. (Per their policy, the moderators will eventually lock this thread in favor of the sticky.)
SSR, the top poster on this board (and an expert on Creative players), has an email list on his own website for new Creative player downloads: http://www.stainlesssteelrat.net/njb.htm . Though it's not specific to any one player, you can be sure the Zen Xtra firmware upgrade for MTP/Janus (the technology behind Napster To Go) will be announced there when it's available. (And it works, too: I just got word of the new Audible firmware for my Zen Micro thru that list.)Message Edited by RBBrittain on 09-8-2005 04:07 PM

Creative Zen Xtra Firmware Upgrade Problems v1

While trying to upgrade the firmware on my Creative Nomad Jukebox Zen Xtra, there was a problem with the upgrade. I'm now stuck in rescue mode v.3. When I plug the MP3 player into the computer, Windows will recognize it and asks me what to do. I exit that window and try to run the firmware update again. The firmware program tells me "Your player is not connected, please connect your player."? there are 2 options "Upgrade" and "close". Upgrade is greyed out, but close is clickable. I've tried
1. clean up,
2. format all,
3. reload OS and
4. Reboot.
None of those options seems to do me any good. I've uninstalled all the Creative software from my computer, but still no luck. Please help me. I'm doing my best to avoid having to go buy an iPod, but if I can't get my Creative Mp3 player to work, I guess I will have to. I have spent a lot of money between cables, the docking station and the leather case. I'd hate for all this to be wasted, so please help me.
I've tried to "reload the OS" and then clicked on the language the moment the Player told me to start the update. Someone please shed some light on this for me. I've tried email Customer Support. I've searched Google. I've put my best skills on it and of course I've scoured this website to no prevail. Someone help me out.

READ ALL BEFORE PROCEEDING You do need to install the driver. http://support.creative.com/Products...e=MP3+Players# When you get to the page for your player bottom left the manual selection choose Xp & clik submit the driver should be the first one version 2.0.00 .After the driver is installed when you plug in the player check in device manager to see that it shows up there Start>Control Panel> System>Hardware>Device Manager look under Portable Devices or for the name of the player. Use a rear USB Port to assure a good connection. Then run the firmware file on the computer ,choose reload firmware or Os on the player,choose language when player asks for update(the pop-up from windows indicating that it "sees" the device DO NOT CLOSE IT.)

Had a failed Firmware Upgrade on a Zen??? LOOK INSIDE FOR POSSIBLE

From the Nomadness.net forums: (I had the same problem and user inferno9 at those forums posted this which fixed my issues - hope it helps!)
The problem was that I had formatted the dri've and attempted to reload the firmware, when, BOOM, the firmware updates would not detect the player. I tried all kinds of different strategies, different drivers, different applications, safe mode, etc...until I FINALLY figured it out.
Buried deep within Microsoft's website, I found this link...
http://www.microsoft.com/windows/windowsmedia/player//readme.aspx#RollingbacktoapreviousversionofthePlay er
Quote:
Issues updating firmware on Creative ZEN portable devices after installing Windows Media Player
If you have a Creative ZEN device, make sure the device has the latest firmware before you install the beta release of Windows Media Player . To download the latest firmware, go to Creative Worldwide.
If you try to upgrade the firmware on your Creative ZEN after you install the beta release of Windows Media Player , the Creative firmware upgrade software might not recognize your device.
In this case, remove Windows Media Player , update the Creative firmware, and then reinstall Windows Media Player . Creative plans to address this issue in future firmware updates.
For information about removing the beta release of Windows Media Player , see Rolling back to a previous version of the Player.
Endquote:
Good luck all.

EnsRegis wrote:I'd really love to see a firmware upgrade that gives the Zen Touch a color screen instead of a black-and-white screen. It can't be that hard to program, can it's If you made this, the Touch would be better than any other player on the market! It'd beat the iPod! Just kidding.
I think so

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on 05-30-2006 :7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

ZEN TOUCH 20GB - Stuck in Recovery Mode, during Firmware upgrade. HEL

Ooooh dear.
Me and my Zen Touch are completely stuck. Decided to upgrade the Zen's Software and Firmware and am now in deep trouble. Here are the steps I took.
First I sensibly backed up the 2000 songs on the player to my computer. Then I updated the MediaSource software and restarted the computer. Then I decided to go for the big change and downloaded the new PlayForSure firmware installation and that's where the problem starts - It never completed the installation, which I had to manually stop. I knew as part of puting this new Firmware onto the player, the Zen would be wiped clean, which it has. However, I now cannot get it out of recovery mode and it will not respond to attempts to download the new (or any) Firmware onto it.
What I now get is:
-Plug the Zen in, the computer recognises that there is plug and play equipment attached and makes the appropriate noise.
-The Zen will switch itself on as a response (or I can do it manually), with a normal-looking startup. It then briefly flashes a screen saying "Firmware Problem" before going into recovery mode.
-If I choose Clean Up, it takes a few seconds to clean the now empty disk, and returns to the recovery menu
-If I choose Format All, pretty much the same as Clean Up
-If I choose Reload Firmware, it warns me that the firmware will be erased. And asks if it should reload it via USB. You say 'yes' and it briefly flashes up "Start firmware update now" before returning to the recovery mode menu.
And finally, if I select Reboot, that's exactly what it does; the computer recognises that it's turned off, makes the noise, and recognises when it's turned on again.
Trying to download the Firmware from the computer, however, has turned into a nightmare. I've tried downloading the PlayForSure firmware and old Firmware from the files on my computer (running XP, by the way). And I've also tried prompting the Zen starting up the Media Source software, BUT they all claim that the player is NOT connected! Even though it is! The Zen switches on and Windows makes a sound every time I connect or disconnect it!
So what to do? I'm stuck in this vicious circle and no matter what random tricks I try, I can't get out. The player needs Firmware, but the software on the computer claims the player's not connected.
The player is now more than a year old, so I can't return it, and Creative's less-than-generous telephone support is not an option, so I'm left to any imaginati've and kind-hearted subscribers to this list to offer suggestions.
HELP!
Mark in the UK

My son?s Zen simply turned on one morning and refused to do anything except enter recovery mode, giving a firmware problem error and Creative Zen v0.0.58After an hours research I solved the problemI hope this helps someone out, but remember anything you do is your responsibility not mine, continue at your own judgment
Creative site SingaporeDownload driver and firmwarehttp://sg.creative.com/support/downl...ype=0&x=30&y=6
download driverCreative Zen and Jukebox Driver Upgrade version .30.03
firmwareCreative Zen Firmware .00.02
Install driver, connect Zen, should show up in my computerAnd yes, when you open the Zen from there it WILL say not correctly connectedBecause the firmware is corrupted! But it is connected Go to the firmware file and double click, the firmware software will connect to the ZenAnd overwrite the firmware. Follow the on screen instructionsYou may get a warning that the firmware is the same version etc. just do it, as at the moment the Zen is useless. Good luck and if it works repay me by helping someone

Creative Zen Microphoto - "Firmware upgrade failed&qu

Hi,
two days ago my Zen Microphoto started in "Recovery Mode".
I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
Then I downloaded the latest firmware version for it:
ZENMicroPhoto_PCFW_L6__3_0.exe
Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
ZENMicroPhoto_PCFW_L6__3_0.exe
detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
I also tried the same procedure with
ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
Any ideas how to "repair" the player
Toddl
Message Edited by Toddl on 04-2-2008 09:40 AM

I have this same problem except with the Zen Vision: M. Any help would be appreciated.

"firmware upgrade failled" ZEN NOMAD FIRE p

Similar Messages

Maybe you are looking for