Firmware upgrade on Toshiba 50L2436DB

Hi
Does anyone know how to upgrade firmware on this model?
I`ve downloaded firmware and moved bin file which is only file that decompresses onto usb drive but tv doesnt appear to see it.
Any help greatly welcomed.
Thanks

Have you read the installation instruction before, that can be found on the same site, from where you also downloaded the file ?
What happens at which step of the instruction, when you try to update ?

Similar Messages

Toshiba Stor.E tv 1TB PA4209E-1HJ0 SYSTEM FIRMWARE UPGRADE?

Hey
I just purchased a toshiba stor.E tv 1tb multimedia player but it doesn't support mkv video formats & others like rmvb
Is there any system firmware upgrade that i can flash into the bios?
If so pls provide me with the link to it ?
Note : i did not find it on the support page
But i have read that the Stor.E tv 2TB's support the video file formats i'm looking for.
Would it be possible to use the same firmware bios on the 1Tb ?
thanks & regards

hey there,
i just purchased the same hdd. my problem is: after some trys to make it compatible to my mac (i created two partitions - one fat32 and the other in mac-format) it didnt work any longer. i mean i dont have access to the data when i connect it to my tv. even after turning it back to the former status (one fat partition) its the same. i can see the screen, when i turn it on, but i dont have a menu to choose any file. setup is working as well...
so obviously its not possible to get any firmware or other support. does anyone have a solution? maybe a soft-/firmware i can use???
thanks,
stefan

Toshiba 47M7463DG no Cloud service after firmware upgrade

Hi All,
I have a problem with my Toshiba 47L7463DG. The Cloud services (accessible from the Home button) stopped working after the recent firmware upgrade. Is there something I can do to roll back to the previous firmware version or fix this problem?
Details:
Toshiba 2014-051
May 21 2015
Software Version 8.1.97.09.01.1
MBoot Version 00813201
Shipout G
Thanks in advance.
hysten

Hello,
I have the same problem.
I have above mentioned TV since 3 months So far, everything was wonderful.
Yesterday an update is installed automatically.
After that all stations were adjusted and I no longer get into the cloud menu.
So if I press the button with the "house", nothing happens.
Wi-Fi is enabled and network test was successful. The Red button also works. So I'll be over in the individual libraries.
Three times I set back the TV .Without Success.
Once I was able to get into the cloud menu. When I went out of it and want into the menu again nothing happened.
I also can not access the contents of my USB flash drive.
The latest firmware is installed.
Did someone have an idea?
Thanks in advance
Jan

Toshiba STOR.E TV+ firmware upgrade

Hello,
Is there any unofficial firmware upgrade for the STOR.E TV+ product series? I can clearly see that there's no official firmware upgrade...
The one shipping with the product looks like "work in progress" (you can see this throughout the entire user interface, which is clumsy and very "90s", but especially if you access the device using your browser - though this one could be useful if your math is rusty and need a little help to perform basic additions :) ).
Moreover, despite the fact that the product is on the market for over 1 year now, there's no firmware upgrade available (despite the obvious need for one). Sometimes I wonder when would have been the release date if the product's time to market would have been extended in order to have a fully functional product upon the release!
@ Toshiba developers: if you don't bother to release a firmware at least give the code "as is" to the community. This way you will certainly find someone willing to do (out of pure passion) whatever you were supposed to do (for the money you make as developers, part of those we pay for this product as customers).
Thanks.

Hi there,
As expected, the software is... archaic!
You can telnet into your box (user: root, no password required) and you'll see the software specs: it is based on BusyBox 1.1.3! There's nothing wrong with BusyBox (a Debian-based Linux distribution, originally intended to run from a single floppy disk, but now able to run to almost anything: phones, routers, NASs...), except for the version: 1.1.3 has been released on May 17, 2006! (Yes, it was already 4 years old when Toshiba decided to put the STOR.E TV+ on the market!).
The newest version is 1.19.3, released on October 29, 2011 (and, if you follow the release notes, there have been some tremendous improvements form 2006 to 2011!).
So.. Toshiba guys, when can we expect an update? (I sure would like to have a proof that you're actually working!)
It is certainly not enough to just throw an update to the CLI-based code; it must be linked to the remote and OSD as well (besides, since Toshiba is not mentioned in the products list on the BusyBox site, I don't expect them to have been used an open code). So just changing the routines, without changing the way they're called for, is useless, and could brick your product.

Satellite Pro M10: firmware upgrade issue DVD UJ-830B FW:1.50, HW:1.00

Hi,
I had tried to replace the old DVD/CDRW with the above UJ-830B ( FW: 1.50, HW: 1.00) but the result was IDE error. It is not recognize it in Windows at all.
I have tried to solder the contact 48 and 49 but result is the same.
How can I make to work this UJ-830B ( FW: 1.50, HW: 1.00) on Toshiba Pro M10?
Is any one have any solution like firmware upgrade or some hardware soldering/desoldering?
Thanks.
Regards

This is not possible because such software is not placed or released on any of Toshiba webpage.
Fact is that not all CD/DVD drives are compatible with all notebooks due to different master/slave/c-sel settings.
Therefore its always advisable to contact the ASP in your country or to check the user manual to get the details about combatable drives.
I can recommend only buying an compatible and supported ODD.
Bye

Firmware upgrade cannot be installed on my 42UL863

Hi!
My TV does not find the any new firmware on the net, I comes back with the message that there is no any new firmware. I have 19.3.49.227 30 Aug 2011 but there is 19.3.61.7 for UL863G from feb 2012 on the toshiba site..
When I extract and load this on a USB stick (i tried several) upgrade seems (after Yes click) to start, the "upgrade" popup shows up but the progressbar does not change and it comes back after a while with something like "upgrade file cannot be found"
Any ideas?
Cheers!

Hi
Here is another [How to update the firmware|http://fget.dl.toshiba.com/manual/procedure/10002/procedure_of_downloading.pdf?fromPid=%2Ftsb-dtv%2FNA%2FGB%2FEN%2F42UL863G.html&f=procedure_of_ downloading.pdf]
Not all USB Thumb drives will work for Firmware Upgrading. The USB
Thumb Drive should be formatted as a FAT or FAT16 fi le system and NOT FAT32. If the
Firmware Upgrade does not work try a different USB Thumb Drive.
Copy the extracted downloaded upgrade file(s) including directories if present to the blank
USB Thumb Drive. Now follow the instructions in the Installation Instruction.

Qosmio F15: card reader firmware upgrade to read type M xD cards?

I've done a little research and haven't found an answer to this question...
Is there a firmware upgrade to a Qosmio F15 laptop that will allow the multiple card reader to read Type M xD cards?
It reads the standard xD cards but I bought a 512Mb card and it will not read it.
Thanks

Some units support only a certain cards and not all card sizes.
Possibly this card is not compatible with the card reader slot.
I have investigated a little bit on the US Toshiba site and found out that this notebook supports secure digital cards 256MB SD-M256B3 and 512MB SDM5124B3
However, you can try to update the texas instrument flash media driver:
Have found this interesting Toshiba document:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1474485&BV_SessionID=@@@@07 57628877.1158743881@@@@&BV_EngineID=ccciaddilfkkee gcgfkceghdgngdgnj.0
good luck

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

Firmware upgrade crippled cp1025nw

LaserJet CP1025nw color: was working flawlessly
received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
ran upgrade 4/3/2012 from iMac, OS10.6.8.
got error: 'update failed'
print queue says 'printing', cp1025nw doesn't respond.
printer lights: orange triangle enclosed exclamation mark plus green semicircle
This means: fatal error, per the user manual.
manual instructs to turn off, unplug, plug-in, turn on. I did this several times.
printer lights still indicate: fatal error.
HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                  tried to print configuration page: got error 'cannot establish two-way communication with the device'
                  printer and computer are connected with USB cable, (this cable / port communicates without issue to Epson inkjet printer)
Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                  has routinely printed from this computer previously.
error message in printer queue: 'error - printing',
Dell said 'found new hardware' tried to install with HP cd-rom
                  error message said 'the hardware was not installed because the wizard cannot find the necessary software'
ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
print test page: no response from the cp1025nw
What should I try next?

Since my last post I’ve retried the same troubleshooting described before, this time just from the PC. The result is still the same. Lights on the cp1025nw indicate “fatal error”.
Does anyone know how to put this printer into ‘bootcode’ mode? I’ve read about this in some other posts about HP firmware updates trashing printers.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
and
http://www.fixyourownprinter.com/forums/laser/63535
Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
HP: How do you start up these printers when they are just manufactured to load the firmware?

HDMI output not working since firmware upgrade

I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.

Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

Sky Router firmware upgraded - can no longer login with credentials

I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

After review the events of the morning.....
I normally keep my routers in the basement where my eth jacks all hub. High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor. I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor. So it was moved to the first floor, on a counter. That morning the router started acting up a bit, not bringing an iphone online. It was looked at - and a couple of post cards that had been placed on top, removed. Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.
1. There is no way to look at temperature - maybe the device doesn't even know its own temp.
2. There is no fan that I can discern. Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow". Temp controlled fans is simple, well proven tech.
3. This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
me

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Firmware upgrade correct steps?

We are carrying out a firmware upgrade on our 9509’s from 3.3(1c) to 5.2(2) and I want to know if the steps below are correct?
Check hosts for paths to both Fabric's.
Take a backup of the config for all the switches.
On Fabric A upgrade switch 1 to 4.1(x)
Upgrade switch 2 in Fabric A to 4.1(x)
On Fabric A upgrade switch 1 to 5.0(x)
Upgrade switch 2 in Fabric A to 5.0(x)
On Fabric A upgrade switch 1 to 5.2(2)
Upgrade switch 2 in Fabric A to 5.2(2)
When happy, then do the same for Fabric B for the other switches.
Thanks

looks good, just follow the release notes to go to the correct intermediate code level so that upgrade is non disruptive

Firmware upgrade on Toshiba 50L2436DB

Similar Messages

Maybe you are looking for