Firmware Upgrade trouble

Hi,
I'm currently trying to upgrade my linksys WRT54G v1.1 router using the WRT54G-EU_fw,0 file, however when I press upgrade it comes up with a message saying "Incorrect Image File!". The current firmware version is v1.42.2
Is there any way to fix this so I can upgrade it?
Thanks in advance.
P.S. I'm fairly uneducated about internet stuff so plain english is much appreciated.

wilk34 wrote:
Hi,
I'm currently trying to upgrade my linksys WRT54G v1.1 router using the WRT54G-EU_fw,0 file, however when I press upgrade it comes up with a message saying "Incorrect Image File!". The current firmware version is v1.42.2
Is there any way to fix this so I can upgrade it?
Thanks in advance.
P.S. I'm fairly uneducated about internet stuff so plain english is much appreciated.
what browser are u using ? was it a bin file that u downloaded ?
I believe that I can make it

Similar Messages

Hr2000 firmware upgrade troubles with external triggering mode

Hello,
Has anyone had any problems with the latest Ocean Optics HR2000+ firmware upgrade while using external triggering mode?
I'm using the NI-provided drivers for HR2000+ which used to work without a problem before the driver update. My program synchronizes 3 spectrometers so that they continuously acquire spectra at 1 second integration time while being triggered by a pulse generator running at 20 Hz. It used to be that the specs would trigger again only once the previous integration completed, but now the spectrometers try to trigger with each trigger and don't complete the 1 second integration. My code has not changed at all between firmware upgrades, and I expected it to work exactly the same after the upgrade. I've reinstalled all programs, inf, and sys files related to the driver as well.
Do I have to wait for a new NI-Driver update that adjust to the new firmware update? Attached is the driver package I'm using.
Any clues as to what I can do about this?
Thanks,
Mike
Attachments:
Ocean Optics 2000 4000.zip ‏582 KB

Attached is a sample VI for what we're attempting to do. This used to work before the Ocean Optics firmware update.
Attachments:
specs_with_trig_post_firmware_upgrade.vi ‏57 KB

Firmware upgrade, then lost

Hi,
Quickly following automatic firmware upgrade on 1 week old Time capsule, network is now lost. Airport set up utility can't find Time Machine .. others experience the same problem? TM feels hot .. perhaps overheated due to firmware upgrade. Solutions welcome.

Your computer came with OS 9.0.4 installed. OS9.1 is required for Classic so is handy to have, and apparently your firmware installer requires 9.2.1 You can use free updaters to update to any later OS9 version from any earlier one.
I don't see any option but to obtain a used copy of OS9. Make sure you get the gold full retail version rather than a machine specific version since the latter will only work in those computers for which they were designed. You can get away with a machine specific version as long as it exactly corresponds to the model and build of yours, but that is often hard to confirm until too late in the purchase.
Note that any drive you want to use with OS9 either for purposes of installing OS9 or for running software will have to have OS9 drivers present on it. These are installed when you format a drive and cannot be installed later without reformatting the drive (and losing everything on it). If your computer still has its original drive then those will likely still be on there unless you reformatted the drive with OSX and did not select the keep OS9 drivers option (there's no harm in doing so and it saves a lot of trouble for doing exactly what you are trying to do). You can can have a drive present that doesn't have the drivers but it simply won't be seen by OS9.
Disconnect all third party hardware (including PCI cards) when updating the firmware.
Message was edited by: Limnos

E71 Firmware Upgrade Step-by-Step (Undocumented Ti...

Although Nokia’s firmware upgrade claimed to be smooth using Nokia Suite, the fact it is not. There are many things which could interfere with the process. For example upgrading E71-1 firmware from 100.07.76 to 110.07.127 is not always trouble free. Based on experience, here are precautions to take:
Before you begin:
• Make sure your phone and computer/laptop are fully charged.
• Make your personal data is backed up safely.
• The BEST, FASTEST and EASIEST way of saving your personal data is making a copy of your phone memory on a memory card. Choose Tools > Memory > Options > Back up Phone Memory and wait until it will be competed.
• Make sure Nokia PC Suite is not running.
Upgrade Process Instructions:
1. Download and install latest “NokiaSoftwareUpdater” http://europe.nokia.com/A4579163 .Reboot if required.
2. Disable Antivirus or any other interrogative software on your PC.
3. Launch “NokiaSoftwareUpdater” and follow instructions
4. When prompted, connect your phone, in this case E71.
5. A 3-step process will start, identifying your phone, downloading latest firmware and upgrading to latest firmware. (a process of 15 min.)
Following those instructions will ensure a hassle-free upgrade.
Good luck.

I have a related issue on my E71-3 (New Zealand). Since moving to Firmware 501.21.001 contacts I have in 1-touch keep dropping off - not all, just the odd one here & there. In addition, the group ring tones for the same contacts are dropping off. Very odd. Most frequently it is my partners number impacted, which is why the issue stands out to me ... On start up, I'm now getting a message saying not all applications can be loaded from the memory card - on checking app manager, they are all loaded ... Anyone else having these issues?
iPhone 4 is looking more & more tempting by the day ;-p

E90 firmware upgrade problems

Recently, I upgraded my E90's firmware from the version 7.xx to 300.34.84. I backed up all the data on the phone prior to the firmware upgrade - as required for the retention of software certificates and data.
Some of the trouble I'm having now is with the Download! folder, specifically the Applications subfolder - it does not update it's content - actually, it's totally unaccessible. Also, the Windows Live Application no longer works - and I'm unable to download a fresh copy as a result of the problems with the Download! folder. Prior to the firmware upgrade, I had using the Windows Live Messenger application and the Windows Live email/messaging synchronising facility in the Messaging folder hitch-free for about three months.
Any ideas? Thanks
By the way, I don't think the upgrade in this case has much merit. Other than the A-GPS, there's no real substance in 300.34.84.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

I just saw a post for the exact same problem on an E71. Search 'E71 Download! folder: Service Not Available' by hazz on this site. See my problem is I'm not too interested in the third-party software available from ea.mobile.nokia.com/ea/apps/. I'm interested in the ones that become available in the Download! folder, under Applications. When I click on Applications, the chevron appears, followed by the progress bar, which fills almost completely, then shows the this message: 'Catalog update failed!' I believe my internet connection is working fine - I watch youtube on the device often.
This week, a new link appeared - U2 - Get On Your Boots - which great, 'cause U2 rocks. But, Applications remains dead - even if I remove it from the list and click - Options/Select/Refresh List.
I got around the Windows Live problem by using the awesome Nokia Messaging (email) [http://email.nokia.com], and the instant messaging application mxit. Besides those minor issues, I think the E90 is a pretty awesome device.
Thanks
Symbian connected me to the world, to my dreams.. Thank-you Nokia

Amazing improvements since firmware upgrade

Hi, I have had a pretty much trouble free (i still have an annoying CPU whine that applestore says is just my young ears being sensitive. Im 20 not stupid!!)
macbook, week 35.
I updated the firmware and now it runs VERY cool, and the battery life has become amazing!!!
4 hours-4 hours 20 mins, running full brightness and on airport connection.
It used to max out at 2.5 hours..
Also the sound is louder through the speakers.
Also, can I just say WOW I installed windows xp with bootcamp and it is AMAZINGLY fast. I did it for my games,
and the graphics card seems to handle the sims 2 perfectly at high settings.
It looks great!!
SO in my opinion the firmware upgrade gets the thumbs up!!

Like tcdm said, the timer is based on the rate of drainage at that particular moment. Think of the timer being like the battery indicator of the ipod. On hard drive-based ipods, the battery indicator can tend to make a quick plummet when accessing music or larger files like movies. The battery is basically telling you how much is left based on the rate of power usage at that particular moment, but then when the hard disk stops spinning the indicator jumps back up with just a little taken away. If you see 5 hours at one moment, accessing large files(which kicks the HDD into motion) will suddenly put you at a little less. I set a stop watch on my macbook while it played a movie in MPEG-4 format. after playing movies continuously from full charge to near empty i got about 4 hours (roughly 3:53 by my watch) I count the time from full charge to the moment i get the first battery low warning. after that its just a few minutes before the computer sleeps to decrease the rate of power usage. So far no big changes as far as i can see, I think this firmware update mostly addresses the issue regarding the cooling system readings rather than energy efficiency, but who knows.

Firmware upgrade fails

I am having trouble upgrading the firmware on my WRE54G. My hardware is v.3 and the existing firmware is 3.01.01.
I downloaded the latest firmware and extracted the .img file. I went to the admin page of the expander, pointed it towards the new firmware, and hit "go." After a minute or so it said something like:
Firmware upgrade fail.
Fail!
No reasons are given.
Anybody have any idea what is going on?
Thanks,
Garth

I had a similar problem upgrading firmware with my WRT300N. What i did to solve the problem was first i downloaded and went through the winzip program given for the router, then i went back to the webpage of the router and retried the upgrade and it worked. I actually ignored by routers version, and downloaded and went through each winzip program and each firmware upgrade for every different version . **i only downloaded the firmware up to my version and my version**.
Message Edited by DaveY on 11-15-2007 07:01 PM

BEFW11S4 constant disconnect after firmware upgrade

I was having trouble with my router losing connection every 2 hours or so . I have downloaded and installed the latest firmware and now it keeps disconnecting almost every 30 min. I have a static IP on my main pc and dhcp enabled for my xbox360. I have checked the cables if they were bad by swapping them but the problem was still there. Any help would be very much appreciated.

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Also, please list all the static LAN IP addresses that you are using on your network.
If you are not using the default DHCP server range of 192.168.1.100 thru 192.168.1.149 , then please state your DHCP server range.
Are you running any peer-to-peer (P2P) software? If so, this is a known cause for router slow downs and disconnections. Temporarily stop using the P2P software, then reboot router, and see if this corrects your problem.
Who is your ISP? Are you on a cable system? Some cable systems monitor the MAC address of the devices connected to them, and eventually boot off any MAC address they don't recognize. If you are on a cable modem, try cloning your MAC address (done in the router), and see if this corrects the problem.

Bulk Firmware Upgrade Option in Systems Settings Tab

Has anyone tried to use the bulk firmware upgrade option in the Systems Settings tab? I was able to get all the set up done and chose the 8 cameras that I needed to upgrade. The job seemed to finish successfully. However when I checked the firmware on the 8 cameras that needed the upgrade, THEY WERE NOT UPGRADED!! Instead of upgrading the cameras selected via checkbox, the job chose the first 8 cameras on the original 2600 model list, completely ignoring the cameras that I had actually SELECTED FOR THE UPDATE!!!
Is anyone else having trouble with this dialog?
Cisco, can you repair this ASAP!!!
Thanks.
ka

Kim,
We've experienced the same problem and it is very frustrating. We had to modify the bugfix workaround because it didn't quite work for us either. Here's what we found.
- It doesn't matter if you sort by column name or not; the utility will randomly pick a camera from the filtered list.
- If you write a filter that captures all of the cameras you need to update, and update all of them, it will update as expected.
- If cameras are failing using the utility, check to see if you can install manually. You may be getting bit by the "Bad Magic Number" bug, which requires you to set your camera name back to it's default.
We found ourselves updating all the cameras for a specific location with the same model all at once. We'd schedule a brief downtime with the department and do it all at once. Of course, we tested this in a lab environment first to make sure the firmware didn't break anything.
As for "Not In Recommended Firmware", this worked for us on 4500E cameras as long as we specified what our "Recommended" firmware was under the "Manage" firmware tab.
This was all using 7.2.0. We haven't installed any firmware updates since going to 7.2.1.

SB wow wireless not working after firmware upgrade

Hello,
In the beginning of this year I bougth a pair of Sound Blaster World of warcraft wireless headset. And there have been alot of trouble with them, I've been using the latest software but not the latest firmware ever since then.
And every now and then my mic stop to work, I could hear sound but the mic was totally dead, and all of a sudden, of no logical reason the mic started to work agian.
So I thought a firmware upgrade could make them work better, but no, i upgrade firmware from .9.x to .0.x.
And guess what happens? Nothing works no, not the sound, not the mic, the USB trasmitter cant even sync with the headset anymore.
Ive tried a million things now, some of them are:
. Just tried to reinstall it, didnt work
2. Tried to install it in winxpsp3 compability mode, didnt work.
3. Tried to clear all temp-folder (the temp-folder under c:\windows\temp and the user-temp) after Ive uninstalled it, didnt work.
Im running on Windows 7 Professional x64 edition.
What could cause this? I havnt tried to install them on a XP-computer yet tho. But I have to get them work in Win7, since i cant downgrade just because of a headset, huh?
Thanks,
Johan

Ok, please redirect me to a tecnical supportpage where I can find potential solutions,
- and instructions how I do for example a downgrade of firmware?
PS, This page does not include any potential solution:
http://support.creative.com/Products...tDetails.aspx?
catID=437&CatName=Headphones+%26+Headsets&subCatID =23&subCatName=MIDI+Keyboards&prodID=9068&prodName =Sound+Blaster+World+of+Warcraft+Wireless+Headset& bTopTwenty=&VARSET=prodfaqRODFAQ_9068,VARSET=CategoryID:437

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

Firmware upgrade crippled cp1025nw

LaserJet CP1025nw color: was working flawlessly
received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
ran upgrade 4/3/2012 from iMac, OS10.6.8.
got error: 'update failed'
print queue says 'printing', cp1025nw doesn't respond.
printer lights: orange triangle enclosed exclamation mark plus green semicircle
This means: fatal error, per the user manual.
manual instructs to turn off, unplug, plug-in, turn on. I did this several times.
printer lights still indicate: fatal error.
HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                  tried to print configuration page: got error 'cannot establish two-way communication with the device'
                  printer and computer are connected with USB cable, (this cable / port communicates without issue to Epson inkjet printer)
Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                  has routinely printed from this computer previously.
error message in printer queue: 'error - printing',
Dell said 'found new hardware' tried to install with HP cd-rom
                  error message said 'the hardware was not installed because the wizard cannot find the necessary software'
ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
print test page: no response from the cp1025nw
What should I try next?

Since my last post I’ve retried the same troubleshooting described before, this time just from the PC. The result is still the same. Lights on the cp1025nw indicate “fatal error”.
Does anyone know how to put this printer into ‘bootcode’ mode? I’ve read about this in some other posts about HP firmware updates trashing printers.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
and
http://www.fixyourownprinter.com/forums/laser/63535
Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
HP: How do you start up these printers when they are just manufactured to load the firmware?

HDMI output not working since firmware upgrade

I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.

Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

Sky Router firmware upgraded - can no longer login with credentials

I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

After review the events of the morning.....
I normally keep my routers in the basement where my eth jacks all hub. High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor. I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor. So it was moved to the first floor, on a counter. That morning the router started acting up a bit, not bringing an iphone online. It was looked at - and a couple of post cards that had been placed on top, removed. Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.
1. There is no way to look at temperature - maybe the device doesn't even know its own temp.
2. There is no fan that I can discern. Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow". Temp controlled fans is simple, well proven tech.
3. This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
me

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

Firmware Upgrade trouble

Similar Messages

Maybe you are looking for