Firmware Upgrade WAG54GP2v2 worse than before

My WAG54GP2v2 suddenly played up after being powered up.
It would kind of boot up then lock up with a solid power red light.
I went online help at linksys and they said to reflash the frimware.
I did this using TFTP and I was only able to connect a few seconds after booting the router before it locked up.
It went well and I got the green sign from the tftp software, went and rebooted the router and now its worse than before cant even ping it or anything, now it just has a flashing green power light.

Try to reset your gateway, remember that this will erase the entire configuration of the device. Press and hold the reset button for about 10 secs then powercycle it. If same problem, re-do the firmware update.

Similar Messages

3.x query performance on upgraded BI 7.0 - worse than before upgrade?

Dear Sirs,
upgraded a BI system this weekend from 3.x to 7.0. Purely technical upgrade so no upgrade to 7.0 queries yet.
What we have seen is that queries with "loose"/lagre selection ? (e.g all plant .. all months) etc have worse performance than before upgrade.
One example: a query went from 26second to 60 seconds to run.
Small selection (e.g one specific plant and date) is same run time.
Has anyone had similar experience?
Is BI 7.0 optimized for 7.0 queries, or are there any performance parameteres I could look at.
Best regards,
Jørgen

Check this thread:
Performance problems on NW04S/BI 7.0 after the upgrade
Additional:
[Improving Query Performance by Effective and Efficient Maintenance of Aggregates|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906de68a-0a28-2c10-398b-ef0e11ef2022]
BI Performance Improvements in 7.0
BI Performance Improvements in 7.0
Hope this helps.
Regards
Andreas

Support getting even worse than before

3 days, and support haven't even acknowledged my SR. Does anyone else feel that its getting even worse than it already was?

"Sorry but the analyst is in the US and won't be available for another 6 hours".
Not good enough, I asked for it to be treated by someone in Europe.
Why not propose that someone in Europe looks at it instead of saying that the analyst isn't available? Plus, she said that she'd look and see if they had enough resources to deal with the SR. Sorry but this bs didn't happen 3 or 4 years ago. I can't say to MY clients that Oracle haven't got the resources to fix a problem.
Good product, bad support.
Matt

New itunes & Firmware - Outlook calendar sync is now worse than before!

I have tried everything in the latest help file. Uninstalled and reinstalled new itunes and firmware. Reset sync history. Turned off all other add-ins except Apple, etc., etc.
At least before, a Cal sync would at least get the holidays from Outlook 2007. Now the iPhone calendar is COMPLETELY blank.
What is going on with this. Does anyone have their calendar synching? Is this a problem for all users on XP or just some?
I cannot believe Apple would let this go soooo long without a proper fix.
DD

Hey PTBoater,
Well, I finally got the Calendar in Outlook 2007 to sync properly!
I have Win XP with Office 2007.
It seems there must have been something corrupt within the Calendar, in the .pst file. Not sure what but the more I thought about that .pst file, I have been using it for many years and continually moving it to my next system or software version.
Despite the fact that I deleted just about all of the entries in the Calendar and just kept the ones from the last month. Still did not work.
Plan A
Go into Outlook and print out your calendar, as far as necessary. Unfortunately, you will have to rebuild your calendar manually. The calendar printout will assist in recalling the date, time and purpose, etc. When I did mine, I simply worried about upcoming appointments and therefore, it was not a big issue. I later added holidays in Outlook, using the holiday add function and that worked fine and sync’d ok.
Go to your .pst file. If it is in its default location it will be C:\Documents and Settings\User Name\Local Settings\Application Data\Microsoft\Outlook.
I copied the original .pst file and made a duplicate copy and left them in their original directory. Then I renamed both files, to oldoutlook.ddd and oldoutlook1.ddd so Outlook could not find them any longer.
I then opened Outlook 2007 and of course it gave me an error about not being able to find the .pst file and it suggested a new .pst file, etc. I accepted the new file.
Then, I went back to the original .pst file and renamed it back to what it was normally, I believe was outlook.pst
I then opened Outlook (which opened the new file, not any of the old files) and used the File>Import, to selectively import all of the items, except the calendar.
Unfortunately, this made the process a little long but I was able to finish it in about 30 minutes.
How-To
In Outlook 2007, Choose File>Import & Export. Choose "Import from another program or file." Click Next. When you get to the “Import a File” dialog box, choose “Personal Folder Files (.pst)”. Click Next.
Then Browse to the location of your .pst file. If it is in its default location it will be C:\Documents and Settings\User Name\Local Settings\Application Data\Microsoft\Outlook.
Once you get to the Outlook structure, you will notice many folders, as part of your .pst file. DO NOT choose the first listing, which will import everything within your .pst file. Rather, go down the list and selectively import one item at a time, being careful to NOT import the Calendar.
Once you have completed this, you can begin re-building your calendar. A lengthy work-around but it is nice the sync is finally working.
Hope this helps!
DD

OS X 10.7.3 WiFi - worse than before?

Ever since first buying this iMac (2011, i5, 69701GB, 8GB, 1TB) it did not find my wireless network when waking from sleep. Sometimes I had to turn the WiFi off and on to get it to work.
Subsequent updates and upgrading to Lion helped - a bit. Now I only have to refresh the list of available networks and my connection resumes automatically. A pain but I can live with it.
The latest update which claims to fix WiFi has actually made it worse though! Now my WiFi show zero signal when resuming from sleep and does not reconnect to my home wireless network. I have to manually select it and then it reconnects.
Any ideas?

To answer my own question it seems a workaround is to wake the iMac up using the power button rather than the keyboard. The WiFi reconnects this way.

Aperture book quality - worse than before?

Hello everyone,
My photo studio has been using Aperture for 8 months now and we are very happy with it. We love the organization, web output, etc. We also LOVE the book design layouts, but the quality of the book printing has been degrading over that past few months.
The first books we printed with Apple (around Nov/Dec 2006) were great, then about 3 months ago, we noticed the labels on the hardcover books went down in qulaity (almost like they were just using a color laser printer), and today we received five books in the mail and the quality is terrible. Also, two of the books have the "Made on a Mac" page in the back (like iPhoto).
It seemed to me (since I have had books printed by both Aperture & iPhoto) that the older Aperture books were of higher quality than the iPhoto books. Now, it seems as though they are one-in-the-same and our studio cannot have this lower quality book - it is not up to our standards.
I would gladly use another manufacturer, but every other design software out there for each respective company is terrible and takes three times as long for us to design a single book. I LOVE the integration of the books in Aperture and it makes our timeline two weeks shorter with our clients and that is what sets us apart from other studios in this town.
Has anyone else had these problems or noticed the change/degridation in the quality of the books?
Thanks!

C'mon Apple,
There is no way you don't know that the quality of your "sticker" covers is horrible. Maybe when you first launched your book service, but it has now been years. I just received three books, and all three have tacky, peeling front stickers.
Please give us an alternative, even if it costs more, that allows us to show our work with pride. After spending thousands and thousands on computers, software, cameras, lenses, etc., the cover of the books drags that first impression into the ground.
Thanks!

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

IPad 1st gen with iOS 5 is worse than Vista - Downgrade?

I have a 1st generation 3G iPad. I updated to ios 5. iOS 5 has rendered my iPad nearly unusable. Honestly, this is upgrade is WORSE than Vista. Apple should be ashamed of releasing a major OS upgrade that renders a whole generation of machines unusable.
Yes, I have tried nearly everything. I have "restored" and I have rebooted numerous times.
The thing that is the most frustrating about this is that before the ios5 update my iPad was the highest quality computing experience I had ever had. Now it is the WORST computing experience I have ever had. Every single application crashes. Typing is dead slow. The iPad hangs. Videos will not play or will play audio only, or will crash on load.
Again, I have restored, and rebooted numerous times. APPLE should be ashamed of this!!!!

iCloud does this from time to time. It usually is a result of a corrupt contact or calendar entry. Killed the battery and performance on my 3GS, 4, 4S, iPad (first gen), and even my MacBook Pro until I found the corrupt contact and deleted it. No problems since.
Also, to the OP, just because a few people have problems, doesn't mean that it "renders a whole generation of machines unusable." I have 6 first gen iPads in my family and all are working fine... Try resetting, restoring from backup, and restoring as new. see what happens then...

Firmware Upgrade: p1102w, p1606dn, m1210 series, cp 1025nw

The following products require a firmware upgrade (FW older than 20130210 ) and re-registration with ePrint center for use of the ePrint feature. Please print a configuration page to see what version of firmware your printer has.
HP LaserJet P1100 Series
HP LaserJet Pro P1102w
HP LaserJet P1600 Series
HP LaserJet Pro P1606dn
HP LaserJet M1210 MFP Series
HP LaserJet Pro M1212nf MFP
HP LaserJet Pro M1213nf MFP
HP LaserJet Pro M1214nfh MFP
HP LaserJet Pro M1216nfh MFP
HP LaserJet Pro M1217nfw MFP
HP LaserJet Pro M1218nfs MFP
HP LaserJet Pro M1219nf MFP
HP LaserJet Pro CP 1020 Color Printer Series
HP LaserJet Pro CP1025nw
If a customer has one of the above devices, has FW older than 20130210 and has registered the device with HP ePrint Center, they will need to update the firmware on their device in order to continue to use the ePrint feature.
To obtain the firmware, please visit www.hp.com/go/eprint and do the following:
Select your device series from the list.
NOTE: Reference above list for help on finding your device series.
Select the appropriate operating system for your PC.
Click the RUN button.
Follow the on-screen instructions to download and install the firmware upgrade for your device.
After firmware upgrade is complete, you may need to reset Web Services on your device and re-register the device with the HP ePrint Center by doing the following:
Access the Embedded Web Services (EWS) by entering the IP address of your device in your web browser’s address bar.
Click on the HP Web Services tab.
Click the button to remove Web Services.
Click the button to enable Web Services.
Print the information sheet to get the new ePrint printer code for your device.
Go to www.hpeprint.com
Sign in to your ePrint account.
Select “Add a Printer” to your Account.
Enter the new printer code for your device (from the information sheet).
10. Enter a new customized email address.
NOTE: Your previous customized email address may be unavailable. If that occurs, please choose a new customized email address or enter your old customized email address and choose from one of the suggestions presented.
11. Change your ePrint settings as needed.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

@jrboozer,
Have you tried going into your Start menu, looking for the HP folder, then using the wireless configuration utility? When I set the wireless up on my machine, this was how I did it and it worked beautifully.
Please let me know if you need any other help.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

My battery dies quicker than before, even without using the phone .aslo it shuts down unxpectedly (sometimes shuts down at 30% then i cant restart it until i blog it to the charger) and sometimes jumps from 40% to 20% or from 20% to 3%

hi!
my battery dies quicker than before, even without using the phone
aslo it shuts down unxpectedly (sometimes shuts down at 30% then i cant restart it until i blog it to the charger)
and sometimes jumps from 40% to 20% or from 20% to 3%
i have done many things people recommanded it for me like :
restore : i've done two restores and it gets better for the first 1-2 weeks then it gets worse than before.
also deleted my music list (19gb) in order to make this better (as recommended) but it still the same
my screen brightness is always ALWAYS low , almost the lowest.
i close the apps when i finish using them ALL OF THEM
i dont use the camera and flash , almost rarely. just to save battery.
i dont use the location service always.
i dont charge my phone until it shuts down and i dont unblog it until it reachs 100%
basically i have tried eveything.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Firmware Upgrade - OLD Text Messages/Photos Appearing BEFORE I Text

I recently went through the Thunderbolt Firmware Upgrade. All is well EXCEPT when I go to answer a text message. BEFORE I start typing, old messages and photos that I had sent to a totally different recipient months ago, are already entered into the response text box. I have to back out (back space) to get rid of text or I have to delete an arbitrary photo which was AUTOMAGICALLY inserted for me!
Not only does this waste my time, it can be very confusing! I could also inadvertently send private photos or private texts which were meant and sent to someone else MONTHS ago, to someone they were never intended for....!
Anyone else have their text messaging being hijacked by the operating system since the recent firmware upgrade??
Not sure who is responsible for the fix on this but, from what I see on this forum, I am lucky by comparison, to the other issues being experienced by those who updated their firmware (2/11/2013) when Verizon forced it onto us.
THIS NEEDS TO BE FIXED! Does no one BETA TEST these upgrades before they are forced upon us?

Hi Loonlady!
I understand your concern w/your messaging! I use messaging all the time and would not be happy either. I have some troubleshooting steps for you. Please give it a try and keep me posted:
Wipe Cache Partition
Before booting into Recovery, ensure that fast boot has been turned off:
1. Tap Menu
2. Tap Settings
3. Tap Power
4. Uncheck the box for Fast boot.
Once fast boot has been turned off, reboot into Recovery to wipe cache partition:
1. Power off the device
2. While holding down the Volume Down button, press the Power button. The device will boot into the bootloader which is a white screen with 3 Androids at the bottom screen.
3. Using the Volume Down button, select RECOVERY
4. Press the Power button to select the option. Device will reboot into a black screen with a red exclamation mark in a red triangle atop a device.
5. Press Volume Up and Power button to get into the Recovery menu.
6. Using Volume Down button, highlight the Wipe cache partition option.
NOTE: Be sure that Wipe cache partition is highlighted. Do not choose Wipe data/factory reset as this will result in loss of data!
7. Press the Power button to select the option
8. When the process, is complete, ensure that Reboot system now option is highlighted.
9. Press the Power button to select the option and reboot the device into the OS.
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Upgraded to ADSL2 now get slower speeds than befor...

Hello
Well last Tuesday my line was upgraded to the 20mb ADSL2 and I was looking forward to some increase in bandwidth (even though before the upgrade my line was pumping 7mb most of the time which I was happy with)
Now for some reason I am getting slower speeds than before I upgraded. Something tells me I should not have bothered with the amount of effort it took to get the upgrade.
I cant understand why my DL is saying 3000+ and before upgrade it was reading 7500+
I have not reset my hub manually all disconnections have been done automatic.
Here are my router stats and I have been reading a few posts and I am hoping someone can shine some light on this for me:
BT Home Hub - DSL Connection
DSL Connection
Link Information
Uptime:
2 days, 0:36:48
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
687 / 3,347
Data Transferred (Sent/Received) [MB/GB]:
177.59 / 3.69
Output Power (Up/Down) [dBm]:
9.5 / 0.0
Line Attenuation (Up/Down) [dB]:
14.5 / 28.0
SN Margin (Up/Down) [dB]:
12.5 / 19.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
2 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
17 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 97
HEC Errors (Up/Down):
0 / 96
Line Profile:
Fast
Software version: 6.2.6.H
Solved!
Go to Solution.

That's good to hear
Enjoy the speed
-+-No longer a forum member-+-

Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before. Has Microsoft taken over Apple software?

SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.

Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done...

Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?

Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?

Have a cup of coffee.

I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Firmware Upgrade WAG54GP2v2 worse than before

Similar Messages

Maybe you are looking for