Firmware Version 1.0.2 - Need Assistance

Hi ALL,
OK, I do believe a trip to the Apple Store is needed, please advise..
For the last couple of days, I have been getting the hang of using this great product and while doing so, have noticed it getting rather warm. Today after about 45 minutes of use, it got so hot it was uncomfortable to hold (NO Case, just the iPhone). I ended up turning it off for fear of damage. I think the iPhone needs to be exchanged... Do you AGREE?
Next, with Firmware Version 1.0.2, if I get an iPhone that has this version, do I have to update the firmware to version 1.1.1 in order to use it? OR can I leave it at the version 1.0.2 and activate the phone, sync the phone and in essence do all I do now, but with version 1.0.2? ; THOUGHTS?
If I exchange the iPhone, what is the procedure on activation, since I already had a phone and this is a replacement? ASSISTANCE NEEDED?

You need to take it to the Apple store. It is malfunctioning.
You will not get a phone with 1.0.2. All replacement phones come preloaded with 1.1.1.

Similar Messages

N73 with Navicore needs firmware version 2.0628.0....

Hi folks, I have N73 with v0.0.1 firmware but have been told by Navicore that I need 0.0.3 to run their Personal Europe 2006/1 software. Problem is if you go the Nokia site there is no Firmware upgrade for the N73 handset. Anyone got any idea how to get N73 firmware version 2.0628.0.0.3 or later. Thanks in hope

Well, I took my N73 to the Nokia repair centre and the chap checked my actual phone details against Nokia's internal website and guess what - the model of N73 I have only supports the version of firmware that is currently on it (version 2.0628.0.0.1).
He also explianed there are many different versions of the N73 handset and many different levels of firmware for each version. He kindly re-loaded 2.0628.0.0.1 just to make sure that there were no corruptions. The bluetooth still drops out so:
I have now sent the navicore software back to Mobilefun (who have been excellent) and am contemplating what to do with the Nokia N73 - frisby comes to mind.
I wish Nokia would get there act together BEFORE selling phones rather than using us (mushrooms - kept in the dark and fed) to Beta test their code after - and still no comments back from Nokia on this forum.
EDIT: removed expletiveMessage Edited by jams on 26-Sep-2006
02:24 PM

Need assistance to update Photoshop cs6 and Lightroom to version 2014. Please help!

Need assistance to update Photoshop cs6 and Lightroom to version 2014.
I have a Mac. I am not a member in Creative Cloud, invested big and bought CS6 and LR in the beginning of last year.
Please help!

These are not updates (just as CS6 was not an update to CS5), but upGRADES. They are available to CC (Creative Cloud) subscribers. While in the past you might have been able to pay for an upgrade (e.g. CS5 to CS6) you now have to subscribe. Once you are a subscriber you can upgrade to each new version as it comes along.
As well as the full CC subscription there is a $10/mo plan with only Photoshop and Lightroom. Creative Cloud Photography plan | Adobe Creative Cloud

Need a Script to Audit Firmware version of HP components.

Hi Team,
I am new to this portal, I am not sure if i have selected the correct board for this issue. If not please redirect thie thread to the correct team or guide me the link to the HP Blade system portal.
My issue:
We have 285 HP Servers, Where almost 275 are HP Proliant BL460 G7 & G8 Blades and the rest are HP DL380P and DL380 Standalone servers.
We recently did a HP SPP Update on all these machines and now for a reason we want to Audit if the component updates were correctly done by our engineers or not.
How ever for HP OS Components i have a script to Scan the registry and pull the Product version and match it to see if it has the Latest version or not.
But how do i do an Audit for the ILO'S of these machines and the Onboard Administrators and the HP Virtual connect if the firmware versions are correct or not ?
Is there any script or any Method to achieve this ?
We also have HP SIM tool as well, Can we do it form that? If yes then how ? Can any one please help in this ?

Frederik, After some tweaking and testing i was able to get it working, I haven't tested it via GPO as a startup script but standalone it is doing what i was after. I cant thank you enough for helping me on this as i had lost hope after days worth of intense
searching
Change that i had to apply ( space in a network path
was causing a "path not found error", Had to rename the "Office365 update" and update the path in Customconfig.xml or any other location that was pointing to "office365 update" )
set DeployServer=\\contoso\c2r\Office365 update\
REM Set ConfigFile to the configuration file to be used for
deployment (required)
set ConfigFile=\\contoso\c2r\Office365 update\Customconfig.xml
REM Set LogLocation to a central directory to collect script
log files (install log files are set in XML file).
set LogLocation=C:\AppData\Local\Temp

Need link to WRT16Nv2 Firmware version 11 please.

I recently purchased a WRT160Nv2 router with firmware version 11.
I had it configured to allow remote desktop connection to any of the 3 PCs.
PC1 3389 (External) to 3389 (Internal) on IP aaa.aaa.aaa.aaa
PC2 3390 (External) to 3389 (Internal) on IP bbb.bbb.bbb.bbb
PC3 3391 (External) to 3389 (Internal) on IP ccc.ccc.ccc.ccc
This worked fine.
However, I was having DNS issues that apparently were fixed in firmware version 15, so I upgraded.
And could no longer use the configuration above
As soon as I tried to enter the PC2 details (or PC3) it gave an error saying the port range was already in use.
I'm guessing that the firmware is not recognizing the different IP addresses and thinks the port 3389 is a duplicate.
After much searching, I found a link to firmware versio 8, which supposedly did not have the problems that version 11 has.
However, version 8 has the same issue as version 15 in not allowing the configuration I had.
Ande, after speaking to several online linksys chat people, and waiting patiently for a phone call from a tech, I do not have any link to firmware version 11.
So, if anyone happens to have a WRT160Nv2 with firmware version 11 still on it, and know some way to read the firmware out of it I would really appreciate it
Thanks.

Thanks for the link.
However, when I tried to register it told me my email address was banned (odd, since I've never been to that site).
Also, there is no contact information on the site for contacting the administrators so no way to get email unbanned in order to register to download the firmware.
I'm STILL waiting for the linksys tech to call, was supposed to be 48 hours from when I spoke to the tech online.
ldb.

Need assistance to configure ASA-SSM-10

Hello All,
Can someone assist me on setting up the IPS ASA-SSM-10 module in ASA 5520 firewall . I have just licensed the box. It would be great if someone can help me with relevant videos\docs to configure the SSM module to enable all the required IPS features for the box to run. I am running ASDM 6.4 and if anyone has the configs to enable via ASDM\CLI whichever is feasible is fine . Kindly assist .Below is the module details.
ASA 5500 Series Security Services Module-10
Model: ASA-SSM-10
Hardware version: 1.0
Firmware version: 1.0(11)5
Software version: 7.1(8)E4
App. name: IPS
App. Status: Up
App. Status Desc: Normal Operation
App. version: 7.1(8)E4
Data plane Status: Up
Status: Up
Regards,
Karthik

Do you need the syslogs to be sent or the Events.
IPS sensors do not support syslog forwarding. Syslog is fairly
restrictive in size of messages and is not secure or reliable.
sensor does support sending of events using SNMP
(again with the same sets of restrictions: not full data, clear text,
not reliable).
There is a physical ability to send events as traps. It isn't
recommended for many reasons (or lets say it isn't recommended in the
same way that monitoring using SDEE is). SNMP trap receivers generally
aren't built to handle, say 200 events per second per device. The
sensor isn't capable of sending at the same event rate as it is with
SDEE. The traps are in clear text and are not reliably sent. They
don't contain the same amount of info as an SDEE event, and can't.
If you need the events to be sent to a database you can run cisco IME which can collect all the events generated by the IPS.
Hope this helps.
Sachin

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

No Apple here, user to user forum.
I will not be releasing any version of iOS ever.

Problem with restore.I have a 2 gen running firmware version 4.2.1

Hello there !
Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
Thank you tons for the help !
@Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00AAB2F80F513CD0
Current user is an administrator.
The current local date and time is 2011-07-17 18:45:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
IP Address:     192.168.2.10
Subnet Mask:     255.255.255.0
Default Gateway:     192.168.2.1
DHCP Enabled:     Yes
DHCP Server:     192.168.2.1
Lease Obtained:     Sun Jul 17 17:51:16 2011
Lease Expires:     Wed Jul 20 17:51:16 2011
DNS Servers:     192.168.2.1
Active Connection:     Connexion réseau
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is off.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-17 18:43:19.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Contrôleur d'hôte ouvert PCI vers USB NEC. Device is working properly.
Contrôleur hôte PCI vers USB standard étendu. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (2nd generation) running firmware version 4.2.1
Serial Number:     9E01226F201
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Will firmware version 4.1.7 automatically update to 4.1.9?

I recently upgraded to OS 10.3 from OS 10.0 on my Imac 700MHz G3. The installation documentation said that I would be prompted to upgrade the firmware if I needed to. I was not prompted so I went ahead and did the OS 10.3 installation. The firmware remained version 4.1.7f4 after the install.
Not too long ago I went through the same procedure on my Imac 400MHz DV. The only difference is that I started the upgraded process from OS 9.I, then to 9.2.2 using the updates (ending at the latest version of 9), then to 10.0, and then to 10.3. And finally updating with 10.3.9 combo to OS 10.3.9. During that whole process I never new about firmware and never checked to see what version I had before starting this process. After all of the above installations were finished I ended up with firmware version 4.1.9f1.
My concern is with the 700MHz G3 IMac. I'd like to update to 10.3.9 using the combo update but I'm concerned about the firmware. Will firmware 4.1.7f4 be updated automatically to 4.1.9f1 after the combo OS 10.3.9 is installed? Or should I erase the disk again and start over by first installing firmware update 4.1.9? Actually if that were the case I wouldn't be able to update my firmware since I don't have the correct bootable version of OS 9 on disk that is required for that computer. However my previous experience with the installations on the 400MHz DV suggests to me that that the firmware will automatically be updated. But I would like confirmation from the experts. I'd hate to spend all that time downloading and installing all of the latest updates (Combo 10.3.9, etc.) only to find that the firmware version is incorrect.
Thanks!
Al

Al,
I don't understand your anger. In your first message
you posted that you installed OS 9 and updated it to
9.2.2. So why don't you do that again on the 700 MHz
iMac?
I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

How do you determine the firmware version for a laptop docking station?

How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin

atenpo wrote:
How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin
WA995AA#ABA shows to be a hard drive, not a docking station

Need assistance conscerning Zen V (Application/Driver CD missi

Hello. I have lost my driver/application CD. I have installed drivers and can access my mp3 player trogh windows, but id doesn't suffice for me. I want to install Creative MediaSource As I did when I first got the player (using the supplied CD) Why is it so hard to navigate your site and find this download.. I cannot find it anywhere.. only updates (Which by the way requires Creative MediaSource) so.. LOL! Get smart and fix it!! Good player by the way. Can you tell me the exact url I need to paste into my browser to get to the download? If not, explain why! And explain well... AND explain what I can do to get a hold of it pretty soon! -Section 8 out- Oh.. and by the way here is a paste -> -------------------------------------------------------- Pasting awailable downloads on your page, as you can see Creative MediaSource is not available for download!: Title Date . Creative ZEN V PlaysForSure Firmware .0.03 (2.9 MB) 20 Oct 06 Download Now Download Now This download contains an improved version of the firmware found on your Creative ZEN? V. It adds support for new languages. For more details, read the rest of this web release note. Show Details... Filename: ZENV_PCFW_L20__0_03.exe This download contains an improved version of the firmware found on your Creative ZEN? V. It adds support for new languages. For more details, read the rest of this web release note. Added Features or Enhancements: * Adds Polish, Turkish, Czech and Hungarian support for your player. * Allows your player to work better with new Creative speakers like TravelSound? ZEN V and PlayDock? Z500. * Adds the Set Clock menu item. Select Main Menu -> System -> Clock Settings -> Set Clock. Fixes: * Improves your player's overall performance and connectivity. * Removes the Organizer option from the default main menu. * Enables the display of picture thumbnails from your player's icon in Windows Explorer (for computers with Windows Media? Player only). * Enables playback of audio tracks downloaded with Rhapsody? version 3. and Rhapsody version 4.0. Requirements: * Microsoft? Windows? XP Professional x64 Edition, Windows XP (Service Pack or higher), Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004 * Windows Media? Player 0 or later * USB . port (USB 2.0 recommended for faster transfers) * Creative ZEN V Notes: * To install this firmware, do the following: . Download the file into your local hard disk. 2. Close all application and Windows Explorer windows that are currently running on your computer. 3. Connect your player to your computer. 4. Double-click the downloaded file and follow the instructions on the screen. Applications Title Date . Creative Media Explorer Update for Creative ZEN V or Creative ZEN V Plus (5.0 MB) 6 Nov 06 Download Now Download Now This update resolves compatibility issues between Creative Media Explorer or Creative MediaSource?, and Windows Media? Player (WMP). For more details, read the rest of this web release note. Show Details... Filename: ZNV_PCPatch_LB.exe This update resolves compatibility issues between Creative Media Explorer or Creative MediaSource?, and Windows Media? Player (WMP). For more details, read the rest of this web release note. You must already have ZEN? V Media Explorer version 5.40.0 or later, or ZEN V Series Media Explorer version 5.4.0 or later installed on your computer to perform this update successfully. To check your current version of this application, see Notes below. This update may not fully support pre-release versions of WMP. Fixes: * Transfers album art and picture thumbnails correctly to your player. Requirements: * ZEN V Media Explorer version 5.40.0 or later, or ZEN V Series Media Explorer version 5.4.0 or later installed. Notes: * To check your application's version number, . Double-click the ZEN V Media Explorer or ZEN V Series Media Explorer icon on the desktop. 2. On the Menu bar, click Help and select About ZEN V Media Explorer or About ZEN V Series Media Explorer. The version number is displayed in the dialog box that appears. 3. Click the OK button to close the dialog box. * To install this software package, . Download the ZNV_PCPatch_LB.exe file into your local hard disk. 2. Double-click the downloaded file and follow the instructions on the screen. 2. Creative PlaysForSure Devices Plugin 5.00.3 for Creative MediaSource 5 (27.22 MB) 8 Oct 06 Download Now Download Now This download contains the Creative PlaysForSure devices plugin, a component application for use with Creative MediaSource? 5 version 5.00.20 or later. Creative MediaSource 5 is currently available on selected installation CDs only. Show Details... Filename: CMS5_MTP_PCAPP_LB_5_00_3.exe This download contains the Creative PlaysForSure devices plugin, a component application for use with Creative MediaSource? 5 version 5.00.20 or later. Creative MediaSource 5 is currently available on selected installation CDs only. To check your Creative MediaSource 5 or player firmware version number, see Notes below. This download includes: * Creative MediaSource 5 ? Creative PlaysForSure devices plugin 5.00.3 The plugin enables you to organize, transfer and manage music tracks in your player using Creative MediaSource 5 version 5.00.20 or later. * Creative Sync Manager version 6.02.20 Sync Manager synchronizes music tracks, pictures and videos in your computer with your player. It also updates your player with Calendar, Tasks and Contacts information from Microsoft? Outlook? or Microsoft Outlook Express. * Video Converter version 5.5.3 Video Converter enables you to convert video files to a format and size suitable for your Creative portable media player. Use the application also to transfer converted video files to your portable media player. Requirements: * Microsoft? Windows? XP Professional x64 Edition, Windows Media Center Edition 2005 or Windows XP (Service Pack or higher) * Creative MediaSource 5 version 5.00.20 or later (currently available on selected installation CDs only) * Creative ZEN? Vision W, ZEN V Plus, ZEN V, ZEN Vision:M?, ZEN Vision, ZEN Sleek Photo or ZEN MicroPhoto OR Player with PlaysForSure firmware 2.00.00 or later (available from the Internet): Creative ZEN Sleek, ZEN Micro, ZEN Touch or NOMAD Jukebox ZEN Xtra Notes: * To check your Creative MediaSource 5 version number: . Launch Creative MediaSource 5 Player/Organizer. 2. Click Help on the menu bar. 3. Click the About Creative MediaSource option. The dialog box shows the version number. 4. Click the OK button. * To check your player's firmware version number: . Turn on your player. 2. From the main menu, select System -> Information. For NOMAD Jukebox ZEN Xtra, select Settings -> About. 3. The firmware version number is indicated under "Version". * To install this download, do the following: . Download the CMS5_MTP_PCAPP_LB_5_00_3.exe file into your local hard disk. 2. Double-click the downloaded file and follow the instructions on the screen. 3. Creative ZENcast Organizer .02.2 Suite (24.35 MB) 4 Oct 06 Download Now Download Now This software suite has been updated and combined for your convenience. For details, read the rest of this web release note. Show Details... Filename: ZCST_PCAPP_LB__02_2.exe This software suite has been updated and combined for your convenience. For details, read the rest of this web release note. ZENcast Organizer .02.2 * ZENcast Organizer seamlessly integrates ZENcast media files with Creative portable media players and/or your computer. Some portable media players may only support ZENcast audio files. Enhancements: * Transfers QuickTime? audio and video files more quickly * Adds the Scheduler setting to set a fixed time for channel updates * Enables concurrent downloads of multiple channel items * Resumes interrupted downloads of channel items * Adds cleanup feature for removing old ZENcast downloads from your computer. Sync Manager version 6.02.7 * Sync Manager enables you to synchronize various types of data stored in your Creative portable media player and your computer. Sync Manager can quickly compare two repositories, and automatically match all files in the two locations. Video Converter version 5.5.3 * Video Converter enables you to convert video files to a format and size suitable for your Creative portable media player. Use the application also to transfer converted video files to your portable media player. Requirements: * Microsoft? Windows? XP Service Pack (SP) and above, Windows XP Media Center Edition 2005 or Windows XP Professional x64 Edition * Microsoft DirectX? 9.0 and above * Microsoft Windows Media? Player 0 * Microsoft Internet Explorer 6.0 and above or Mozilla? Firefox? .5 and above Notes: * To install this software package, . Download the ZCST_PCAPP_LB__02_2.exe file into your local hard disk. 2. Double-click the downloaded file and follow the instructions on the screen. 4. Gracenote Update for Creative applications (4.00 MB) 30 Aug 06 Download Now Download Now This update addresses a security vulnerability that Creative users face when using Gracenote? services like MusicID? (formerly known as CDDB?). For more details, read the rest of this web release note. You must already have one of the following ap..... Show Details... Filename: CDDB_PCApp_LB_2_40_02.exe This update addresses a security vulnerability that Creative users face when using Gracenote? services like MusicID? (formerly known as CDDB?). For more details, read the rest of this web release note. You must already have one of the following applications listed in Requirements below on your computer to perform this update successfully. Fixes * Secures your computer against the vulnerability caused by using some Gracenote services with a Creative application. Requirements * Creative MediaSource version .00.2 or later * Creative Media Explorer version .00.06 or later * Creative Media Toolbox version 5.00.0 or later * Creative Playcenter version .00.57 or later Notes * To check your Creative application's version number: . Launch the Creative application. 2. Click Help on the menu bar. 3. Click the About option. A dialog box displaying the version number appears. Drag the scrolling area to see the version number. 4. Click the OK button to close the window. * To install this update . Download the file into your local hard disk. 2. Double-click the file and follow the instructions on the screen. * More information about the Gracenote security update is available from http://www.gracenote.com

Hey you can download the Creative Zen V Plus CD Installation here:
http://files.filefront.com/Creative+Zen+V+Plus+InstaDrar/;855920;/fileinfo.html Message Edited by justjoe on 09-7-200708:04 AM

Nokia N80 new firmware version 4.0707.0.7

It's so bad firmware version!
I have lots of problems with new firmware version 4.0707.0.7 that I haven't with past version 4.0623.0.42 !
I can't understand what's going on with NOKIA Software Updater!
>I can't enter to my "Gallery\Images & Video" from "Camera Mode"
>My OS speed decrease
>Captured photos don't show in "Images & Video" until I restart my N80
>For each new files you add, you need to restart your N80 until your N80 find them in memory!!!
Why past version haven't these PROBLEMS and new version have them!!!
Does anybody know how can I return to my past firmware version (mean 4.0623.0.42) ? Is it possible?Message Edited by zoologist1 on 03-May-200712:28 PM

04-May-200710:53 PM
djassa1 wrote:
Basically it means that BB5 phones like N-Series including N80 and E-series cannot be downgraded to a previous version once they have been upgraded. Trying that with third party tools, because it's not possible through NSU, will brick (dead) your phone, period.
That's why I said you'd have to take the phone to a service center.

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Firmware Version 1.0.2 - Need Assistance

Similar Messages

Maybe you are looking for