Firmware version N72..Error

Hi
When i try to download the nokia software update for the firmware it downloads but when i install it it gives an error:
MINIUNM MEMORY REQUIRED IS 256MB...but i am using 512mb Memory card with 450mb free space.
pls help me out friends to solve this issue...
my ver is V2.0617.1.0.3
cheers

yes itunes is up to date...
I also deleted my itunes preferences.

Similar Messages

My iPhone 4S . the restore Ends at 60 % with error 1 (not -1). I reinstall iTunes, download iOS 7.0.3 as ipsw and No success :( I Think that is a problem of the iTunes or firmware versions :/. Apple Please Help us!

my iPhone 4S the restore Ends at 60 % with error 1 (not -1).
I reinstall iTunes, download iOS 7.0.1 as ipsw and No success
I Think that is a problem of the iTunes or firmware versions :/.
Apple Please Help us!

You can't Restore to any iOS other than 7.1.
If the error persists, try on another computer. Still no joy, it is a hardware failure.

Problem with restore.I have a 2 gen running firmware version 4.2.1

Hello there !
Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
Thank you tons for the help !
@Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00AAB2F80F513CD0
Current user is an administrator.
The current local date and time is 2011-07-17 18:45:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
IP Address:     192.168.2.10
Subnet Mask:     255.255.255.0
Default Gateway:     192.168.2.1
DHCP Enabled:     Yes
DHCP Server:     192.168.2.1
Lease Obtained:     Sun Jul 17 17:51:16 2011
Lease Expires:     Wed Jul 20 17:51:16 2011
DNS Servers:     192.168.2.1
Active Connection:     Connexion réseau
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is off.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-17 18:43:19.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Contrôleur d'hôte ouvert PCI vers USB NEC. Device is working properly.
Contrôleur hôte PCI vers USB standard étendu. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (2nd generation) running firmware version 4.2.1
Serial Number:     9E01226F201
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

Need a Script to Audit Firmware version of HP components.

Hi Team,
I am new to this portal, I am not sure if i have selected the correct board for this issue. If not please redirect thie thread to the correct team or guide me the link to the HP Blade system portal.
My issue:
We have 285 HP Servers, Where almost 275 are HP Proliant BL460 G7 & G8 Blades and the rest are HP DL380P and DL380 Standalone servers.
We recently did a HP SPP Update on all these machines and now for a reason we want to Audit if the component updates were correctly done by our engineers or not.
How ever for HP OS Components i have a script to Scan the registry and pull the Product version and match it to see if it has the Latest version or not.
But how do i do an Audit for the ILO'S of these machines and the Onboard Administrators and the HP Virtual connect if the firmware versions are correct or not ?
Is there any script or any Method to achieve this ?
We also have HP SIM tool as well, Can we do it form that? If yes then how ? Can any one please help in this ?

Frederik, After some tweaking and testing i was able to get it working, I haven't tested it via GPO as a startup script but standalone it is doing what i was after. I cant thank you enough for helping me on this as i had lost hope after days worth of intense
searching
Change that i had to apply ( space in a network path
was causing a "path not found error", Had to rename the "Office365 update" and update the path in Customconfig.xml or any other location that was pointing to "office365 update" )
set DeployServer=\\contoso\c2r\Office365 update\
REM Set ConfigFile to the configuration file to be used for
deployment (required)
set ConfigFile=\\contoso\c2r\Office365 update\Customconfig.xml
REM Set LogLocation to a central directory to collect script
log files (install log files are set in XML file).
set LogLocation=C:\AppData\Local\Temp

How to determine firmware version of brick?

Is it possible to determine the firmware version that the logic board has installed? I might be wrong about how the firmware operates, but the word 'firmware' to me usually implies flashing the BIOS. I know what version of 'firmware' the OS portion of the HDD has installed, but I'm not sure that it matches the BIOS and I'm still hoping I can revive the unit without repartitioning, etc. Background - I made the boneheaded mistake of trying to run sudo apt-get install -f <whatever> and was left with an SSH session where only bash built-ins would even run. No `ls`, no `cat`, no `sudo`. I tried to revive the system as best I could while the SSH session was still open using the errors reported and using this guide to abuse shell built-ins to recover a system in this state. But I ran out of time and had to close the connection (on a laptop). After this the system would power up but stay at white light LED indefinitely. So I popped the HDD into a spare linux machine and confirmed the drive looks fine - all data there and the OS RAID partitions were easily browsable. So I reimaged the OS RAID partition with rootfs.img from several different firmware versions (I really don't know whch one I was running as I've updated a few times but not sure when last), but still no luck. Am I wrong in assuming there's a BIOS update as well when we talk about 'firmware'? Am I missing some steps after reimaging the OS partition? Any help would be very appreciated.

I ended up soldering leads on the main board and captured the boot log. I managed to find only one other boot log to compare to (here) but comapring the two hasn't given me much insight. On the surface it seems like my issue is that the AHCI SATA loader is trying and failing to get port 0 to respond. I've posted the full boot log here, but I'll post the last bit here in hopes that someone can point me in the right direction. Thanks. Hit any key to stop autoboot: 0
init_sata:
serdes: 24Mhz ref clk
Serdes 1 : CMU OK
Serdes 1 : Lane OK
Serdes 2 : CMU OK
Serdes 2 : Lane OK
cap 0x6f26ff81 port_map 0x3 n_ports 2
P#SERR 0x4050002
IS 0x0
Port 0 control: 0x300
Port 0 status: 0x123
P#SERR 0x0
IS 0x1
Port 1 control: 0x300
Port 1 status: 0x0
GHC 0x80000000
GHC 0x80000002
ahci_init_one: SUCCESS
SATA Controller Info:
AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part
Enter start port: 0
Port 0 status: 123
cmd_slot = 0xb06000
Device not ready. BSY, DRQ or ERR in TFD!
Can not start port 0
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 7 not an environment
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 8 not an environment
timeout exit!
GPT header not found
Bad Magic Number
arg1 char: s
Barebox-C2K >/

Need link to WRT16Nv2 Firmware version 11 please.

I recently purchased a WRT160Nv2 router with firmware version 11.
I had it configured to allow remote desktop connection to any of the 3 PCs.
PC1 3389 (External) to 3389 (Internal) on IP aaa.aaa.aaa.aaa
PC2 3390 (External) to 3389 (Internal) on IP bbb.bbb.bbb.bbb
PC3 3391 (External) to 3389 (Internal) on IP ccc.ccc.ccc.ccc
This worked fine.
However, I was having DNS issues that apparently were fixed in firmware version 15, so I upgraded.
And could no longer use the configuration above
As soon as I tried to enter the PC2 details (or PC3) it gave an error saying the port range was already in use.
I'm guessing that the firmware is not recognizing the different IP addresses and thinks the port 3389 is a duplicate.
After much searching, I found a link to firmware versio 8, which supposedly did not have the problems that version 11 has.
However, version 8 has the same issue as version 15 in not allowing the configuration I had.
Ande, after speaking to several online linksys chat people, and waiting patiently for a phone call from a tech, I do not have any link to firmware version 11.
So, if anyone happens to have a WRT160Nv2 with firmware version 11 still on it, and know some way to read the firmware out of it I would really appreciate it
Thanks.

Thanks for the link.
However, when I tried to register it told me my email address was banned (odd, since I've never been to that site).
Also, there is no contact information on the site for contacting the administrators so no way to get email unbanned in order to register to download the firmware.
I'm STILL waiting for the linksys tech to call, was supposed to be 48 hours from when I spoke to the tech online.
ldb.

NEW F5, F55 Firmware Version v4.11 and AXS-R5 v4.1

All,
We are releasing firmware version 4.11 for the F5, F55 and version 4.1 for the AXS-R5 RAW recorder
(Version 5 firmware is expected before the end of the year)
Please note:
If you proceed to update firmware, you must update both the camera and AXS-R5 RAW recorder, you must not update one without updating the other
The cameras must be minimum v2.0 firmware before updating to this release v4.11 firmware version
Do not upgrade AXS-R5 to this release v4.1 firmware unless you are at minimum v1.20 firmware on the recorder.
Interval Recording:
There is no change regarding the Interval Recording feature in V4.11. Thus Interval Recording is not included in this release.
Usage of AXS-A256S24 memory card:
You MUST update the AXS-R5 recorder to V4.1 if you want to use the new 256GB card.
See release notes below
PMW-F55/F5 Firmware Version V4.11 Release note
August 8th, 2014
This document explains about firmware update of PMW-F55/F5 V4.1 to V4.11. The latest firmware version of related products is below.
Product name
Latest firmware
Release date
PMW-F55/F5
V4.11
This announcement
AXS-R5
V4.1
Aug 8th, 2014
AXS-512S24
V1.2
June 5th, 2013
AXS Utility Software
V1.3
Feb 28th 2014
RAW Viewer
V2.2
Feb, 28th, 2014
This firmware can be updated from V4.1, V4.0, V3.0, V2.0, V2.10 and V2.11. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013.
F55/F5 must not be downgraded to previous versions after updating to V2.11.
NOTE: The new Firmware V4.11 for PMW-F5/55 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older Version please update to current Firmware V4.1 the same time.
<<Modification from V4.1 to V4.11>>
<Functional Improvement>
1. Corrected Payload ID on 4K SDI output
We corrected an error of the Payload ID on the 4K SDI output stream.
2. Fixed malfunction of Auto Iris function while using CA-4000
While using CA-4000 (4K Live System) and Auto Iris function, the Iris sometimes moved unintentionally after turning “Auto Iris” off. We fixed it.
<Notification we would like to share>
1. Interval recording function
You can see “Interval Rec” on recording menu page, but V4.11 firmware doesn’t support Interval Recording function
2. Assignable button of Marker
When you assign Marker On/Off as an Assignable button, Marker on VF and SDI Out setting is changing below.
Marker on VF
Marker on SDI
Message
Push 1
ON
OFF
Marker ON
Push 2
OFF
ON
Marker ON
Push 3
OFF
OFF
Marker OFF
Push 4
ON
ON
Marker ON
3. iOS setting for Wi-Fi Remote
While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
4. All file Support
All files which are created with Firmware V4.11 are not compatible with an earlier firmware version.
<< Version up procedure >>
Please refer to “Version Up Guide for PMW-F55 and F5”.
AXS-R5 Firmware Version V4.1 release note
August 8th, 2014
This document explains about firmware update of AXS-R5 V4.0 to V4.1. The latest firmware version of related products is below. PMW-F55/F5 must be updated to V4.1.1 or V4.1.0 at the same time. For details about PMW-F55/F5 V4.1.1, please refer to “PMW-F55/F5 Firmware Version V4.1.1 release note”.
Product name
Latest firmware
Release date
PMW-F55/F5
V4.11
August 8th, 2014
AXS-R5
V4.1
This announcement
AXS-512S24
V1.2
June 5th, 2013
AXS Utility Software
V1.3
Feb 28th 2014
RAW Viewer
V2.2
Feb, 28th, 2014
Attention: You must update R5 to V4.1 from V4.0, V3.0, V2.0, V1.21 and V1.20. If your R5 is not yet updated, please update to V1.20 first and go to this updating procedure.
<<Modification from V4.0 to V4.1>>
<Functional Improvement>
1. Support of new AXS-A256S24 memory card
The new firmware will enable the support of the new 256GB AXS-A256S24 memory card.
Attention: The new smaller AXS-A memory cards are only compatible with the AXS-R5 (RAW recorder) and the AXS-CR1 (Card reader) by using the new appropriate card adapter. (Included in the box in USA)
2. Enhancement of Metadata
The new S-Log3/S-Gamut3.Cine & S-Log3/S-Gamut3 settings will be written into the Metadata XML files.
<< Version up procedure >>
Please refer to “AXS-R5 Version Up Procedure”
For AXS-R5_4.10_1621-AXS.f.bin
Download all files here:
https://www.dropbox.com/sh/ylhb6imitvu9n0u/AADe6zvWmZEnPVtmBDtbQtlTa
Regards
Peter

Xplorer wrote:
Will Sony ever release a firmware update with interval recording?? This is getting ridiculous. Fortunately it is still possible to do some pretty decent 4K time-lapse recordings with the camera as it is right now. http://vimeo.com/103176638

Firmware version details

Hi everybody,
I'm using the nokia 5800, and updated to firmware version 30.0.011. I could'nt find any official description of the changes or addition in that update. anyone have any idea where it can be found.
Thanx,
Dodo

I'm not "the man on the inside", so I can't answer for Nokia's policy, but I do know that some other companies don't publish such information because it can have a negative affect on consumer standing if a long list of errors on a finished device are owned up to...

Is every ios release overtakes the previous firmware version ?

Well I dont Know from where to start ....
I am using an Iphone 5 the problem is I am stuck in the recovery mode due to error 1 which is obviosly a hardware issue and most likely to be a baseband problem but here it is why am I asking this question because I was running ios 7.0.6 and suddenly the iphone became in ''Searching..." mode so tried the factory settings by erasing all data and settings but couldn't help so I went DFU mode and restored my iphone using 7.1 IPSW and Wizardry the iphone worked for just one day then the same problem ''Searching..'' .
So I went DFU mode again but this time I let itunes to update to the latest firmware version which is IOS 7.1.1 and then amazingly the phone worked for few hours but then again same problem '' Searching..." and BTW EVERY THING WORKING FINE EVEN WIFI EXCEPT THAT NO CALLS,TEXTS OR CELLULAR DATA AND THERE IS NO IMEI OR FIRMWARE.
So I went DFU for the third time but I got the error 1 alert message and Now I am stuck in Recovery mode.So .. Is that means that every IOS release over takes the previous firmware ... which means if I waited for the next IOS 7.1.2 or IOS 8 hopefully I will be able to get out from the recovery mode and run away from the error 1 alert monster ? ... and I know the problem searching might occur again but I think I might give up then for this handset then. But I want to try all the solutions and options I have in my hands since I got no AppleCare/Store in my Country

It is true that updates may potentially bring changes to some firmware as well as software, but not every thing changes in each update. If your hardware is failing compatibility with the current firmware, I would bet money that you are going to have issues with future versions as well. The iOS assumes that your hardware is in working order when it was designed and a failure in that hardware results in these errors and the inability to operate using the firmware. To assume that a different firmware (especially a future firmware update) will fix you issue is close to absurd, unless that firmware version made all iPhones (or even most) have hardware communication issues. Until that day, Apple is not going to alter the firmware. Also you stated that it worked then stopped multiple times and now you receive error 1, which during the update basically means the iPhone is not passing the hardware test, so even with a future update, the hardware is not going to pass the diagnostic test when installing firmware, therefore you will still need service.
Even if you have to send it off to a friend in the country of purchase, it's going to be better and faster than waiting on something that has a 1% chance of success.

N78 firmware reinstall---Ovi Error 12017

I have owned my N78 for about 2 years now, a little late to the game, so as far as I know it came with firmware version 30.014.
I am now trying to reinstall 30.014 from Ovi 3.1.0.91 on Windows 7 via the Software updates tab and the green "reinstall" text.
After clicking reinstall, the phone backs up and then the installing screen opens. I get a Windows toolbar pop up that tells me my N78 USB has disconnected--and the Ovi screen says to ignore those. When it reconnects, an error screen tells me "Something's gone wrong" with error code 12017.
I would greatly appreciate a solution to this problem. Thank you in advance.

same problem here (((((((((

N95 firmware version - where?

Please excuse a noob question but how do I find the firmware version on my N95? (it only arrived today!)
Malc

http://europe.nokia.com/A4579163
Follow the link, install NSU on your PC, plug the phone and start it.. But don't hurry, Nokia server is down so you won't be able to download anything yet..
Scroll down and read few topics related to that error.

How to change firmware version for N73

Hi
I wanted to force an upgrade for my firmware.
Can u let me know how to do it?
it says " No software updates available for your phone
n73 Rm132 4.0728.3.1.1 .How can i change this version to lower one so that it updates?

hi
me also having a problem with my mobile firmware version, i have a latest version V 4.0812.4.0.1. when ever i try to install a software to my mobile the EXPIRED CERTIFICATE error is shown. i change my mobile date to back years but the problem remains.
i want to go back version, is it possible otherwise what to do, Plz let me know.
Thanks

RV082, intermittent dhcp, Firmware Version: v4.0.0.07

Hello,
I have an RV082 using firmware version: v4.0.0.07. I do not have a separate dhcp server in my workgroup. I have checked the "Enable DHCP Server" box and been running my workgroup this way for a few years successfully with a group of six or seven Win XP desktops and several iPhones, printers, plotters, etc. I just recently seem to be having intermittent dhcp issues.
Specifically, when users log in on our desktops they get an error regarding the connection being low and no IP address is assigned. I can log in to the configuration utility from a machine that has successfully connected to the network and upon refreshing the DHCP status a few times, I see that the machine in question may only receive an IP address for 36 seconds or 60 seconds. After some time and rebooting of the desktop machine, an IP address will be assigned.
Any help you can provide would be much appreciated.
Thank you in advance for your time,
Ryan

I too started experiencing this exact problem a few days ago. Some of the clients (the ones that actually receive an IP address from the RV082) only have a DHCP lease time of 60 seconds. None of my DHCP clients are receiving addresses even with the RV082 DHCP server enabled. No other DHCP server exists on the network. It is a small office network with the RV082 connected to a cable modem, all workstations and other devices connect directly to the router or to the switch connected to the router. I have only one gateway to gateway vpn setup to another remote office with the exact same setup. I also have the PPTP server enabled with 2 clients that are getting IP addresses when they connect.
Any help will be appreciated.
Thanks,
CJ

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Firmware version N72..Error

Similar Messages

Maybe you are looking for