Firmware Version: v1.50.9 on WRT54GS

this firmware creates a problem with DHCP. I is now impossible for wireless devices to connect via DHCP. but works well with wired clients.
I think the new upgrade creates newer problems.

can your wireless pc still see your ssid after the upgrade? after the upgrade you may had reseted the router. what error message are your getting?
Make sure that the wireless settings are all configured correctly.

Similar Messages

  • Firmware version 8.00.2 for WRT54G on a Win 98SE system

    I tried to download the 8.00.2 firmware for the WRT54G on my Win 98SE computer, which is hardwired into the router. I had the laptops with Win XE or with Mac op sys shut down so they would not access the router. I downloaded a file with the extension *.bin. Neither WinZip mor PKZip could expand that file. When I double-clicked the file,  I got asked what program to use to open the file. Please advise on how to use the downloaded file on a Win 98SE system.
    Also, when I tried to download the users manual and the info sheet for this router, I got a blank screen. I'd love to see these.
    Thanks for any help.

    To upgrade a routers firmware, open up Internet Explorer 1st, then on the address bar, type the numbers 192.168.1.1 (username just leave it blank, password as a default is admin). Then go to the Administration tab, go to firmware upgrade, browse, and select the file that you downloaded (the one w/ the .bin extension).

  • I have a WRT54G Wireless modem with firmware version 1.02...

    I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
    What is wrong?

    Which version of the WRT54G do you have?  If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
    The version of the router is important.  Each version has a different set of hardware in it, so each version takes a different firmware.
    You can only load the firmware that corresponds to your model and version.

  • WRT54GS V7 Firmware version?

    Hi all! I've recently bought a WRT54GS V7 cable router/access point. Now, given the problems I've had with previous devices, I'd like to make sure that the firmware is completely up-to-date. However, when I go to the Linksys UK website, and find the product download page, I am asked which version of the device I have. I have version 7, but it is not in the list. Interestingly enough, when I clicked on version 6, and then looked at the firmware version details, it said something like "for version 5 only". My router seems to have version 7.50.0 firmware installed. Maybe this is the version which they all have, and there are not yet any updates available. Does anyone know? Thanks Michael

    vness wrote:
    Change the default country to US.
    Well, I thought I'd tried that already (although it makes no sense to me - I bought the item in the UK).
    However, when I look carefully, I notice that my location is being changed back to 'UK' whenever I try to navigate to the 'Technical Support' page. So this time, I've cleared my cookies, it works, and I can find the file.
    Someone from Linksys might want to get around to updating the UK page, and sort out the location changer so it actually does change when you tell it to. I'm sure that I'm not the only person in the country to have bought one.
    Anyway, thanks for the help, and for the quick response!
    Michael

  • WEBSITE BLOCKING ON WRT54G V6 (Firmware Version: v1.02.8)

    Hello Friends,
    Short: why some webpages block and others don't using this feature in my router?  As mentioned above, I run a small office and  am using an ::: WRT54G V6 (Firmware Version: v1.02.8) ::: router.
    For instance, I have been successful in blocking sites such as "sex.com" and others.  Also, in blocking sites by keywords such as: news, music, vid, nude, etc.  BUT, when I try blocking FACEBOOK or TWITTER either by URL or keyword, guess what: IT DOES NOT WORK...! 
    Any ideas why this happens and how can I be successful in configuring this feature???  I will appreciate this!  Blessings...
    Solved!
    Go to Solution.

    Those sites have a random connection and DNS entries. Your best bet would be to use a DNS servcie like DDNS.com or OpenDNS.com service. Point your router to one of those DNS services and there DNS addresses, then set up one of those services to block FB and Twitter. If you use there DNS addresses on your router instead of the ISP DNS, and you block FB and Twitter, users should beable to get to FB or Twitter after that. 

  • WRT54G V5 Firmware Version: v1.02.5

    Hi I am loking for Firmware Version: v1.02.5 or even older to my WRT54g v5.
    All I can find at web is: 
    10/05/2009
    Ver.1.02.8
    Before I install latest version I would like to have in backup firmware v 1.02.5.
    Is there any archive with old firmwares for linksys products?
    Firmware Version: v1.02.5 
    Firmware Version: v1.02.5 

    I found this on Google:
    http://www.opendrivers.com/driver/284277/linksys-wrt54gv5.0-wireless-g-broadband-router-firmware-1.0...

  • WRT54G, Firmware Version: 8.00.2, Stops routing after a day, Requires Power Cycle to Work Properly

    WRT54G, Firmware Version: 8.00.2, Stops routing after a day, requires a quick 10-15 second power cyc... work properly for a day or so before powering down again….
    I was using for years the BEFW11S4 Model without any issues before it finally failed. Due to loyalty, I went out over a month ago to purchase the current model. The problems did not pop-up until month of December… The issue had me thinking at first was the internet connection…
    Any advice on dealing with this issue… Is it a Software and/or Hardware? It appears to be a software related condition…
    For those other WRT54G users that appear to be having similar issues, regardless of the firmware, it would appear we all seem to be facing the same condition of resolving the issue after a power cycle…
    Is there anyone out there that has already resolved this issue (e.g. Configuration changes)? Does anyone have input that Linksys is actively working on this issue?
    Although I am sure we will find a solution, having to cycle the power is a bit disappointing since my older model had no such flaws with my current internet connection…
    Thanks for the support out there….

    If you have an Intel wireless card you can try this.  I came across this link on the forum a days ago and it seems to help.  The problem is that my problem was much more intermittent than some people are experiencing.  It mainly seemed to appear when undocked the computer or if there was a power outage during the day.  I would be interested to see if it works for you or if I'm just chasing my tail.  I've seen other suggestions for changing the thresholds in the router which may be related.
    http://www.intel.com/support/wireless/wlan/sb/cs-006205.htm

  • How do I determine current firmware version for WRT54G

    I've been poking around the site a bit, and note that there are mandatory upgrades to various firmware versions. I'd like to upgrade if necessary, but have no idea how to determine what firmware version I have right now.Message Edited by shelmart on 12-17-200605:36 AM

    What is the excact hardware version # of your router? U can find that underneath the router itself, there's a sticker there & its just right below the Linksys Logo. If its version 5 or 6, u can go to this website: www.linksys.com/connect . Download  & save Easylink Firmware Tool & then before u run that file after saving, disable first all your internet security like firewalls & anti- virus coz it will block the connection of this software from running properly. That EFL will automatically upgrade the firmware of your router.

  • Firmware Version?

    This may be a very basic question...how do I find out what my firmware version my Airport Express currently has? I just bought my Express yesterday, and have it up and running (with a Linksys WRT54G wireless router); and have read on this forum about problems with older firmware versions (6.1.1) and want to make sure I have V6.3 on mine. Thanks in advance.

    I'm not 100% sure, but most likely, upgrading/downgrading firmware will potentially erase your current settings.
    Sounds like you set up the AX in client mode since you're using an existing wireless router in your network. If so, the following link provides the steps to get it back up and running. (ref: http://docs.info.apple.com/article.html?artnum=302153)

  • Is there a problem with firmware 4.30.5 for the WRT54G?

    Hello experts,
    I have read in this forum that there are problems with firmware version 4.20.5 for the WRT54G.
    Is this so? And if so, where might one find the details?
    Thanks.

    There is now a new firmware update available for the AirportExtremeBase. I had a similar problem as all of you, so I hope this will fix the problem!
    Download the update here: http://www.apple.com/support/downloads/airportextremefirmwareupdate57formacosx.h tml
    PowerBook G4 - 1.67GHz   Mac OS X (10.4.4)  

  • Thank you David ... for links to previous firmware versions

    Thank you david for posting the links to previous firmware versions.  I posted a thread about the WRT54G (V8) and Easylink Advisor not recognizing this router after firmware upgrade.  The timing of your post is excellent.
    Just for some more info for WRT54G V8 users.  I had the Easylink Advisor working before firmware update.  After firmware update it still recognized router but NOT to set up new security settings.  Everything was working and dropped connectivity issues seemed to be resolved so I was happy enough.  But I had a conflict I thought was related to the Easylink advisor intsall (it was).  So, I uninstalled and reinstalled.  Easylink would not recognize the router at all afterward. 
    I think that rolling back to previous version firmware, then going through set up of Easylink advisor should restore functionality to the app. (except for security changes) but I havent tried it yet. 
    I need the new firmware to keep from dropping internet connection.  So, I am hoping that I will only lose access to security changes through Easylink advisor when re-flashing with the new firmware again.  We'll see.
    I assume Linksys will upgate the Easylink Advisor in the near future so that it will recognize the WRT54G V8 router with latest firmware 8.00.4?
    Thanks again David and good luck, all.

    Yes, that was good news for V:M users but when are Creative going to release new firmware for the Zen Nano Plus and the Muvo players so that it contains FM Recording again?Could the Mods try and find out, please??PBMessage Edited by PeeBee on 2-09-20060:48 AM

  • Latest firmware version

    I have a wrt54g v6 can any one tell me what the latest firmware version is?

    You can login to http://linksys.com/download .... type the correct Model number .... & choose the correct version ....the latest firmware is ...1.02.2 (7/02/2007)

  • Problem with restore.I have a 2 gen running firmware version 4.2.1

    Hello there !
    Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
    Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
    I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
    Thank you tons for the help !
    @Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 00AAB2F80F513CD0
    Current user is an administrator.
    The current local date and time is 2011-07-17 18:45:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 9500 GT
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
    Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
    IP Address:     192.168.2.10
    Subnet Mask:     255.255.255.0
    Default Gateway:     192.168.2.1
    DHCP Enabled:     Yes
    DHCP Server:     192.168.2.1
    Lease Obtained:     Sun Jul 17 17:51:16 2011
    Lease Expires:     Wed Jul 20 17:51:16 2011
    DNS Servers:     192.168.2.1
    Active Connection:     Connexion réseau
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is off.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was unsuccessful.
    The network connection timed out.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-07-17 18:43:19.
    **** Device Connectivity Tests ****
    iPodService 10.3.1.55 (x64) is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Contrôleur d'hôte ouvert PCI vers USB NEC.  Device is working properly.
    Contrôleur hôte PCI vers USB standard étendu.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod touch (2nd generation) running firmware version 4.2.1
    Serial Number:     9E01226F201
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

  • How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

    The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
    I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4).  Everytime I open the airport utility I get the following message: "
    This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
    I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
    One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
    I'm getting the exact same message on my other computer, a Mac Air.
    So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
    Thanks!

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Will firmware version 4.1.7 automatically update to 4.1.9?

    I recently upgraded to OS 10.3 from OS 10.0 on my Imac 700MHz G3. The installation documentation said that I would be prompted to upgrade the firmware if I needed to. I was not prompted so I went ahead and did the OS 10.3 installation. The firmware remained version 4.1.7f4 after the install.
    Not too long ago I went through the same procedure on my Imac 400MHz DV. The only difference is that I started the upgraded process from OS 9.I, then to 9.2.2 using the updates (ending at the latest version of 9), then to 10.0, and then to 10.3. And finally updating with 10.3.9 combo to OS 10.3.9. During that whole process I never new about firmware and never checked to see what version I had before starting this process. After all of the above installations were finished I ended up with firmware version 4.1.9f1.
    My concern is with the 700MHz G3 IMac. I'd like to update to 10.3.9 using the combo update but I'm concerned about the firmware. Will firmware 4.1.7f4 be updated automatically to 4.1.9f1 after the combo OS 10.3.9 is installed? Or should I erase the disk again and start over by first installing firmware update 4.1.9? Actually if that were the case I wouldn't be able to update my firmware since I don't have the correct bootable version of OS 9 on disk that is required for that computer. However my previous experience with the installations on the 400MHz DV suggests to me that that the firmware will automatically be updated. But I would like confirmation from the experts. I'd hate to spend all that time downloading and installing all of the latest updates (Combo 10.3.9, etc.) only to find that the firmware version is incorrect.
    Thanks!
    Al

    Al,
    I don't understand your anger. In your first message
    you posted that you installed OS 9 and updated it to
    9.2.2. So why don't you do that again on the 700 MHz
    iMac?
    I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

Maybe you are looking for