Firmware Versions 8.0(4)SR1 - Release notes
Hello I'm trying to find the release notes for the 8.04sr1 firmware. I clicked the link in the readme, and the page is not found on Cisco. Is there another place I can look to find the fixes in this release?
It is under the downloads page: http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
Here is the direct link (you need a valid CCO): http://ftp-sj.cisco.com/cisco/voice/ip-7900ser/cmterm-7911_7906-sccp.8-0-4SR1-readme.htm
Similar Messages
-
ISE version 1.2 patch 6 release notes
Hi Everyone,
I notice that Cisco has released patch 6 for ISE version 1.2 yesterday.
I am trying to locate the all the "resolved" issues for patch 6; However, when I look at the ISE release notes
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/release_notes/ise12_rn.html#wp407339
It only shows resolved issues up to patch 5.
Where can I find the list of "resolved" issues that comes with patch 6?
Thanks in advance.Due to the high demand for patch 6, it was released prior to the release notes. The Release Notes will be updated within 24 hours.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton -
OK, my original iphone has just completed a factory restore. It's connected to my laptop, and ITunes restored it to firmware 3.1.3. Now, I can't connect to the ITunes store. I get an error message every time stating connection timed out, or something to that effect. Well, both my IPod Touch 2nd gen and 3rd gen connect perfectly to ITunes, so I doubt it's related to proxy settings, firewalls, or anything of the sort (believe me, I've spend 15 hours researching this without an answer). So, is there a problem with the original iphone with version 3.1.3 syncing with ITunes version 10.5.1 (the most recent one)?
I would LOVE an answer as this is driving me crazy.
Thanks.Mine had a SIM in it. Originally, when I took out the SIM and tried to restore it with nothing in it, it wouldn't work without a SIM card. So ... I took the SIM that was in that phone previously, put it back in and completed the system restore. I then proceeded to go through the process with AT&T of adding a data plan, which I did, and then it successfully completed the system restore. However, now if I run diagnostics on it, it will not verify ITunes Store. If I try to connect to ITunes store, I'll get the network connection timed out error I referenced earlier in this thread. I'm considering jailbreaking it and putting on an earlier software version. Your thoughts?
-
Version Change Information, Dates and Release Notes
Hi,
We have a (fairly common) problem with our release and development environment whereby a customer has upgraded their environment without informing us, and I am trying to analyse the difference between releases of OC4J.
We are running 9.0.4 and they are now running 10.1.2.
Is there anywhere the release dates and notes of this product, and hopefully other products, are maintained.
I have searched the web, otn, and associated user groups to no avail, so any help gratefully received.
Thank youhujirong wrote:
Hi All
I am setting up a standard configuration management, build & deployment automation and change & release management process for all types of applications including Oracle eBS, Informatica, Siebel, Cognos, Java etc. As you know, SCM for Java and .Net types of applications are very matured, but not for other types of applications such as Oracle eBS.
Can you give me some hint or point me to some documents on how to manage Oracle eBS applications from SCM's perspective? For example,
1. How to version control eBS artifacts? e.g. what kind of eBS artifacts need to be version controlled?
2. How to build eBS artifacts and then deploy to a new environment? How to move an eBS application from one environment (DEV) to test environment?
3. How to manage changes?
We have a standard SCM tool called RTC from IBM, which has version control, build and change control functions.
Thanks
JirongPlease do not create duplicate threads -- Software Configuration Management of Oracle eBS -
WRT54G Firmware 1.02.6 Release Notes
I was wondering if anyone had the release notes for this firmware? I am curious as to what bugs/fixes are addressed in this version.
Thanks!I guess there are no release notes for WRT54G v5/6 router's...You have to wait until they put the Release notes on their website...
-
My company has just received a number of new BB 9300's and I've noticed that the firmware isn't up to date on them. So I've downloaded and installed the latest firmware (977), but can't find any release notes to say what's been fixed/improved. Can anyone point me in the right direction?
Regards, AStaley.It is extremely rare that OS upgrade release notes are even leaked to the public, and most often only the carriers themselves are given any release notes.
So, no, there is no where to point you to. Your best bet is read other users' experience with the release version you intend to upgrade, check forums like Blackberryforums.com and Crackberry for threads whith more information.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
6300 V7.21 Firmware Release Notes
I note that a version 7.21 firmware has been released for the 6300.
Does anyone know where the release notes that detail what has been fixed/improved located?elcado wrote:
Up !
Thanks
"Up !" what? where?
"Thanks" for what? -
Hi,
Are the release notes for the 6140 firmware available publicly anywhere?
Or a list of the changes in v7 vs v6 ( I saw raid6 was added but not sure what else.. )
Thanks,
DanYou need to look at the Release Notes for CAM 6.1 (http://dlc.sun.com/pdf/820-4191-10/820-4191-10.pdf) which is the first version which brought the FW 07.xx.
The major new features are:
■ RAID 6 (6140 arrays only)
■ >2TB LUN Support
■ Portable Volume Groups
■ Batch Volume Operations
■ 8K Cache Block size
The latest version of CAM is 6.4.0_10 and for the FW 07.xx it brings the revision 07.50.08.10.
Nicolas -
Is every ios release overtakes the previous firmware version ?
Well I dont Know from where to start ....
I am using an Iphone 5 the problem is I am stuck in the recovery mode due to error 1 which is obviosly a hardware issue and most likely to be a baseband problem but here it is why am I asking this question because I was running ios 7.0.6 and suddenly the iphone became in ''Searching..." mode so tried the factory settings by erasing all data and settings but couldn't help so I went DFU mode and restored my iphone using 7.1 IPSW and Wizardry the iphone worked for just one day then the same problem ''Searching..'' .
So I went DFU mode again but this time I let itunes to update to the latest firmware version which is IOS 7.1.1 and then amazingly the phone worked for few hours but then again same problem '' Searching..." and BTW EVERY THING WORKING FINE EVEN WIFI EXCEPT THAT NO CALLS,TEXTS OR CELLULAR DATA AND THERE IS NO IMEI OR FIRMWARE.
So I went DFU for the third time but I got the error 1 alert message and Now I am stuck in Recovery mode.So .. Is that means that every IOS release over takes the previous firmware ... which means if I waited for the next IOS 7.1.2 or IOS 8 hopefully I will be able to get out from the recovery mode and run away from the error 1 alert monster ? ... and I know the problem searching might occur again but I think I might give up then for this handset then. But I want to try all the solutions and options I have in my hands since I got no AppleCare/Store in my CountryIt is true that updates may potentially bring changes to some firmware as well as software, but not every thing changes in each update. If your hardware is failing compatibility with the current firmware, I would bet money that you are going to have issues with future versions as well. The iOS assumes that your hardware is in working order when it was designed and a failure in that hardware results in these errors and the inability to operate using the firmware. To assume that a different firmware (especially a future firmware update) will fix you issue is close to absurd, unless that firmware version made all iPhones (or even most) have hardware communication issues. Until that day, Apple is not going to alter the firmware. Also you stated that it worked then stopped multiple times and now you receive error 1, which during the update basically means the iPhone is not passing the hardware test, so even with a future update, the hardware is not going to pass the diagnostic test when installing firmware, therefore you will still need service.
Even if you have to send it off to a friend in the country of purchase, it's going to be better and faster than waiting on something that has a 1% chance of success. -
Hi all!
I have one problem with firmware v.6.10 (this ver. from official site\ NSU)
Applications list is empty always. And I cant change it.
So, the question is:
This problem was resolved in the next firmware ver. (6.43) ???
Some release notes with bug fixes are available???
Maybe anyone have next ver. installed, could you check this?!
I just want to add applications shortcuts to the GoTo menu.
PS 6.10 - 21/12/2006!!!!
How often new ver. are arrived????
Thanks in advance!It is extremely rare that OS upgrade release notes are even leaked to the public, and most often only the carriers themselves are given any release notes.
So, no, there is no where to point you to. Your best bet is read other users' experience with the release version you intend to upgrade, check forums like Blackberryforums.com and Crackberry for threads whith more information.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
WRT610N Firmware Release Notes
Hi All,
Where can I find the release notes for the new firmware version? It is not clearly stated in the linksys website (http://www.linksysbycisco.com/US/en/support/WRT610N/download).
Even though I selected my hardware version 1.0, I can only see on the release note the v2.0 as the initial release (which is obvious that is not true).
Regards,
AKThe release notes are confusing. This firmware is supposed to be working on both hardware v1 and v2, but firmware v2.0 is about the 4th published firmware for the WRT610N v1. Hopefully, they will correct it so that users don't think they have mistakenly downloaded the v2 firmware (even though in this case they are the same).
-
Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?
We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert. -
WRT54GS Version 5. Firmware 1.50.9 Apple Computers do not work
Can anyone tell me how to downgrade the firmware in my router. The newest version of the firmware does not work with Apple computers, it works with my windows computers. Apparently this is a known problem with this firmware upgrade.
Unfortunately, the new firmware is only for the WRT54G. You'll find a solution for the WRT54GS here (the short version):
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=16882#M16882
including a source for firmware version 1.50.8 which is what you need for the WRT54GS
If you want the long version, you'll find it here:
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=10007 -
Where to find release notes for firmware v20 of 58...
Anybody know where i could find the release notes for firmware v20? I wish to know what are fixed. Thanks!
Changelogs are considered confidential information by Nokia. You'll not see an official document reporting the changes made. What you might see is leaked documents on some websites, and you have to take those with a pinch of salt.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
2.1 firmware update listed signal strength display fix in its release notes
Summary to those who haven't read Apple's latest letter to iPhone 4 owners:
Apple is saying 'death grip' only affects the graphics of the signal strength not signal itself. Who accepts that? And will therefore fix this in the next firmware update.
But wait! This seems to be fixed in the 2.1 firmware update already!
See 2.1 firmware update changelogs.
Google it, I don't want to post direct link as Apple may start pulling that information down.
Message was edited by: VenomrushLetter from Apple Regarding iPhone 4
(emphasis mine)
{quote}the formula we use to calculate how many bars of signal strength to display *is totally wrong.*{quote}
{quote}We will issue a free software update within a few weeks that incorporates the corrected formula. *Since this mistake has been present since the original iPhone*, this software update will also be available for the iPhone 3GS and iPhone 3G.{quote}
But the 2.1 firmware had in it's release notes as one of the improvements:
{quote}improved accuracy of the 3G signal strength display{quote}
So in 2.1 they improved the accuracy of a totally wrong formula?
Something is rotten in Denmark.
Maybe you are looking for
-
My iPhone is set up with my old iCloud details - how do I change it to my new Apple ID - my email has changed. I can't remember old password and it's not recognising my date of birth. I no longer have the trusted device or key thing??
-
Customer payment in different currency
hi friends, I have received a payment in euro that i am not able to post because i need to have the customer number or name of the company that has made the payment. how can these type of payments dealt. any suggestions. regards Katya
-
We have an issue, where release codes used by other countries, show up in our purchase orders along with our release codes. Does anyone know is there setting that will help us?
-
Hard Disk stuck !!! What can I do ?
I got a 60GB Black iPod on October 29th. Debated for 4 months whether to drop my loyal flash Rio 1gb and get an ipod. Flying to NY from Chicago the ipod starts making this funny loud noise, the wheel would not work, the song that was being played did
-
Hello! I am a bit confused and need your help. I presently have an iMac with system 10.2.8 and Adobe Photoshop Elements 2.0. I wish to buy a new iMac with Tiger (10.4) and have been told that my Elements 2.0 will not work. Will Elements 3.0 work with