First 20 seconds of Compound Clip showing Black

I have a compound clip, you can see the faint orange line at around 20 seconds, everything before that orange line is showing black.  I can't figure out what is setting the boundary of that orange line and how to extend it to the begiing of the compound clip so that the clips to the orange line's left will show up.
Help greatly appreciated.
mbg

You mean the render indicator at the top? If this is inside the compound clip, not much we can tell without seeing the project it's in. Unless it's in the browser, but then you should see the whole thing.

Similar Messages

  • Compound clips showing as missing events

    I started a project on Macpro tower, then copied that project with all it's events and media to a portable hard drive to work on it with my Macbook Pro.  I did not import anything into the event for this project while working on the Macbook, but I did create some compound clips.  After working on the Macbook, plugged the portable drive into my Macpro tower and copied the project back to the hard drive in the Mac Pro.  I performed the copy via drag and drop withinn Final Cut Pro X. I then began to work on the project.  I did not re-copy the events and clips back to the Mac Pro tower, because they are all there already.
    Now, I find that when I eject the portable drive from the Mac Pro tower, the compound clips show up as a missing event, even though the clips within those compound clips are in the current project.  I've tried to re-link the media, but there doesn't seem to be a way to re-link the compound clip.  I could just trash the new project, but I've done some work on it that I don't want to lose.  Any help would be appreciated.

    Scott Odgers wrote:
    now I know to re-import everything back even if nothing has really changed.
    I am glad you got it working. But something did change. You created compound clips in the Event Library when you added them to your project on the MBPro. When you opened the project on your tower there were no compound clips in the event library without the portable drive connected. Once you copied the new events onto the tower event library FCP was happy and all you need to do is replace the old compounds in the timeline with the new ones.

  • IMovie only imports first 10 seconds of video clip which is 14 seconds long

    I have a Samsung HMX20 camcorder, and when I import a few of the clips, which are around 14 seconds long, into iMovie, I only get about 10 seconds imported into my project (so basically I don't get the end of the clip). What's going on?

    It looks like your _High Definition Samsung SC-HMX20_ is NOT listed as supported by iMovie '09.
    http://support.apple.com/kb/HT3290#2
    The only camera listed is the _Standard Definition Samsung SC-MX20_
    There is also an article about it:
    http://support.apple.com/kb/HT2986

  • Getting HDV to stop cutting off the first 5 seconds of a clip

    So I know that HDV capture with FCP is bad about cutting just a wee little bit off the front of a clip, but I'm having it cut 5+ seconds off! It's frustrating because I slated all my clips for the final editor, but stupid FCP keeps cutting of more than just A second. Has anyone found a way to keep it from doing that? I tried unchecking "make new clip on start/stop", but it still made it into tons of clips. It's a little frustrating to say the least.
    BTW, I am capturing 24P 720P off a JVC HD-110U.
    Thanks,
    Matthew

    Tapes need preroll. More than 1 second preroll. HDV is especially susceptible to this. Always roll tape for a bit before action begins. There's a good reason for the incantation: "Rolling... Speed... Scene 1, Take 7... >clap<... ACTION!"
    Patrick

  • Can anyone help me...Why Can't I open a compound clips containing missing files?

    I Have been using FCPX for only a short time and I have a few unfinished projects on the go. But after tidying up an reorganising my hard drives putting FCPx Projects and Events on an external drive. I find some of my projects with compound clips show this horrid warning icon for "missing files". I am want to relink  the missing clips but FCPX will not allow me to open the compound clips so I could see what are the missing ones... so, can anyone help find a way to re-link or recover those missing files.

    File browser? You mean the compound clip is in the project but not in the event? What version of the software are you using?
    Select the compound clip and use Clip>Reference New Parent Clip. Does that work? Try relinking the project files.

  • Preparing clip for website, show first 5 seconds, loop the next 5

    I'm working on a title...
    I would like the first 5 seconds to only show when a webpage is loaded, for simplification, we'll just say this is for QuickTime instead of a website.
    The whole thing: animated background texture, animated texture on the text
    The beginning: text appears using some effects, has the mentioned animated texture
    The end: the background texture continues to animate, as well as the animated texture on the text
    Only difference between beginning and end: the text does not need to appear, it only needs to show once when the video is played.
    In summary:
    Is it possible to have the first 5 seconds play once, and the next 5 seconds loop continuously? How?
    Thanks a million!

    Is it possible to have the first 5 seconds play once, and the next 5 seconds loop continuously? How?< </div>
    Not in Livetype, no. all you do in LT is create the content. How it is played out or displayed is controlled in your streaming controller.
    bogiesan

  • Making compound clip adds unwanted black between clips

    I have a 2 minute psa that was shot in HD on the NX5 and edited on FCPX. I needed to put it together with other PSAs to make a longer show so I selected all the clips on the timeline and made a ‘compound clip’. The compound clip looks like one clip on the timeline and it should be able to be copied to another timeline. When I watched it back though, FCPX had introduced flash frames of black in between all of the cuts on the timeline, throwing all of the titles out of whack as well. Why did this happen?
    1.  Original Storyline
    2.  Original storyline made into a compound clip.
    3.  When I play it back I get flash frames in-between each clip so i checked the compound clip and found that it introduced black between each clip.

    I ran into this problem too and found a quick solution that may work for anyone who encounters this bug.
    THE PROBLEM: In one of my Projects, when creating a compound clip of the entire Project (so that I could apply Project-wide color and audio correction), gaps were inexplicably added to certain cuts. I don't know why. I first tried to work around this by exporting a Master File, but this also created the same gaps. Ugh.
    THE SOLUTION: Duplicate your Project and in the duplicate, select all and create a compound clip. After creating the compound clip, double-click the compound clip in the Event Browser. This will open the compound clip, with all its bits and pieces exposed, in the Timeline. Go to the bottom-left corner of the Timeline and click the little button there to open the Timeline Index. Do a search for "gap". Select all the results in the list and press the delete key.
    NOTE: Don't forget to duplicate your original Project (before creating a compound clip with the duplicate) so that you have it as a reference and a backup in case something goes wrong. I have not carefully analyzed this glitch and am not 100% sure this workaround is bulletproof. I also am not sure what is causing the OP's titles to be "thrown out of whack" as I didn't have that particular issue, so this "fix" may not actually fix that part of the problem.

  • How do I get chapter markers defined in a compound clip to show up in the DVD menu?

    I have created a timeline to burn a DVD/Blu-Ray. The timeline contains 3 compound clips. Each compound clip contains roughly 25 chapter markers.
    When I open the Share > DVD dialog, it shows the Chapter button in the preview, but the DVD itself doesn't have the chapter markers.
    Expected Result: When I define Chapter markers in a compound clip, they should show up on a DVD burned from a timeline that used the compound clip.
    Actual Result: The DVD does not contain the chapters button, nor do the chapter skip buttons do anything. It's as if the chapters were never defined.
    Workaround: Redefine all the chapter markers in the new timeline over the compound clips - Annoying!
    Is there a simple way to get FCPX to recognize the chapter markers defined in the compound clip when I burn the project? It would save me quite a bit of time!!
    Thanks, all, for your help!

    Thanks for the tip. I was looking for this feature, but it was not included in the context menu. It can be found in the "Clip" menu.
    I think the best workflow for me would be this:
    Edit in a master timeline
    Select the entire master time line, send to compound clip.
    Create a new project, add the compount clip
    Add the chapter markers to the new project
    Select everything in the new project, create a second compound clip.This makes the chapter markers portable.
    Open up the "burn" project, insert the second compount clip.
    Select the newly inserted compound clip, and select "Break Apart Clip" from the "Clip" menuThe result is a managable compound clip with chapter markers.
    Thanks for taking the time to answer my question!
    db

  • In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

    In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

    Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
    Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
    Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

  • Compound clip imported into project not showing up in the event browser

    I have learnt that when one imports any clip into the project from anywhere else other than its associated event folder, the new clip also gets automatically added into the event folder. I have seen this occur when I had imported audio from the music browser onto my timeline directly.
    Today I happened to place a compound clip [a common template which I use for introduction to the video] onto the beginning of a project which I have started recently. I broke the compound clip apart and made the necessary edits. What puzzles me is that this compound clip has an audio clip and this clip was not being shown in the event browser. Is this normal?
    Ps. I have very recently updated my FCPX from version 2 to 5.
    DR.SOMANNA

    Let me explain the matter in a different way...
    I have made a compound clip of the intitial generator clip, titles and music clip which I had used for my first project. The intention to do so being that I could reuse the same for my future projects as well. I placed this compound clip in a new project which I named as templates.
    When I had started upon a new project a few days ago, I copied and pasted this compound clip from the 'templates project' and added it to the beginning of the timeline of the new project.
    Now, for purposes of editing the titles, I broke apart the compound clip and changed the text of the titles. Also, when I had ungrouped the compound clip, there did appear the music clip below the timeline. I know that clips imported from the generator browser and the titles that are added to the project do not show up in the events browser, but should not the audio clip make its appearance in the event browser? I know that when we add an audio from the music browser, this audio clip will be automatically shown in the event browser.
    My question therefore is this: is an audio track that gets added to the timeline of a project via a compound clip that has been added and ungrouped on the timeline an exception to the rule?
    Hope I have made myself clear.
    DR.SOMANNA

  • "Show Photo Settings", my clip is black

    De Javous all over agan. I am using HD 6.03, and have been for quite a while. Back a couple of years ago there was a software flaw the was fixed, now it has come back to haunt me.
    When i have a clip I want to modify, I go into "Show Photo Settings", my clip is black, why is this happining again?
    paul

    Hello, Paul,
    Yes, my workflow is similar to yours. I think the main thing is to do the photos first and the music last, as you are doing.
    I put in my videos first, cropping out the parts I know I won't need. Then I put in the photos. I know that I will eventually have to crop the video clips again to get what I want with the photos, but initially I just put the photos in the correct order. Then I 'fix' the photos to be the right size, duration, etc.
    Next I adjust/crop the video clips and move the photos to their more correct place. If I want the audio to play from the video clip, but over a photo instead of the audio, I make that correction. I do that by either extracting the audio and pasting over the photo, or using WireTap to record the audio from the video clip and just laying the audio clip under the photo and deleting the video clip. I lock all this type of audio clip to its corresponding photo.
    Then I evaluate where I want/need Ken Burns effects on my photos and add that. Sometimes I use Photo-to-Movie for a panning of a large group where I want to title the people.
    Next I do titles and transitions.
    Last I add music.
    Sometimes if the movie has a lot of short audio clips or many video clips and/or photos, I find that the playback becomes slow or stilted or the audio continues and the video lags.
    If I have done all the editing I need to on the clips, I then export the movie as Full-Quality QuickTime. This of course results in a movie that is one long single clip, but it plays audio and video correctly. It can still be edited, but it is a bit tricky to do so, since the audio and video tracks are now one.
    If my movie is long, I usually add chapter markers to the original iMovie, just to know where they should be.
    I then put the new QuickTime movie into a new iMovie project and use that as the movie I burn to DVD. I add music to it, add my chapter markers and then I am ready to use it in my iDVD project. Having placed chapter markers in the original iMovie makes it much easier to create those markers in the QT iMovie. You can open both iMovies at the same time and use the time codes for each marker.
    Most of my movies are of family videos and photos for the year. Each one is nearly two hours. Some years require several DVDs, depending on the activities for that time; some years everything fits onto one DVD. I even went back to the earliest family photos we had.....from the 1890s...and have made DVDs of each side of the family as a history for our kids and grandkids.
    Hope this is helpful!
    PS. Matti's comment about deleting the trash is absolutely correct....I forgot to add that in my first reply

  • My Ipad (4?) screen went black but I can hear it. I tried hitting both the sstart button and sleep button for 10 seconds and the apple icon comes up, my screen saver shows for 1 second and it returns to black screen again. I can hear SIRI. How do I fix?

    I had been using the IPAD and all of a sudden it started talking back to me and when swiping apps to close them they would not close. She (the IPAD) kept talking back to me such as "use three fingers" etc. Then the screen went blank and if I touched it I could get it to beep at various touch points. SIRI would also communicate, but the screen stayed black.
    As was suggested here, I tried getting a reboot by holding the sleep key with the home key and after 10 seconds the apple logo shows and 5 seconds later my screen saver comes on for just one second, and then it goes back to a black screen. SIRI tells me shes not available and someone else, must be her sister, says things like 90%, 85%, 80% if I continually swipe the screen. Can anyone help me?

    Hello, Juniorjr2. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, try reaching out to us here. 
    Cheers,
    Jason H. 

  • In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

    in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds.  How do you get this to remove noise from the very start of the clip?

    Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds.  How do you get this to remove noise from the very start of the clip?

    insert a 5 second gap in the beginning of the timeline.

  • Why are compound clips not showing as such in FCPX any more?

    I opened a project in FCPX which has been languishing for a while. It consists if a number of compound clips. However these are not being treated as such by the application anymore. They appear as regular clips, and I have to right click on them and select "open in timeline" to get them to show their contents. When I go back out of the clip! they retain their regular clip appearance.
    How can I get proper compound clip behaviour from them?

    Tom -
    TBH, I really can not remember how I made them - I started this some time ago, and I decided I really should get back to it an finish it. I started this sometime late 2011/early 2012, so the compound clips would have been made using whaever option was available at the time.
    So, this is what I see in my timeline. The clip “Moscow” is a compound clip.
    When I right-click on it, I see this:
    Selecting Open in timeline gets me into the compund clip:
    A couple of the clips in there are are compund clips too - but you won’t know it from looking at the interface. This seems to be the only project I have that is affected like this.

Maybe you are looking for