First attempt at iCal Publish and ... confused

I published an iCal calendar and time settings do not appear to match.
A regular, weekly event in iCal defined as 08:00 - 09:00 appears in the published form as 3pm or 4pm.
Is the event replicable or the event parameters replicable to others?
With solution?
As an edit: Also, chosen calendar colour code (Red) appears as blue on the published variant.
Should the published variant conform to my chosen colour schema?
Message was edited by: the deebs = an additional observation
Message was edited by: the deebs

Published calendar times: these seem partially solved by declaring Time Zone in iCal on events but, for some reason, of the three adjustments made one insists on remaining 8 hours out of sync with iCal (a repeated weekly event).
Does anyone think it is helpful to have Notes appear as part of a published calendar?
The reason I ask is because we have a weekly event due on Monday of the week that occurs unless the day is a public holiday in the UK. Adding a note along lines of Cancelled on 4 May 2009 (Bank Holiday) seems helpful.
2 - can one do a partial sync? If a calendar event is revised does one need to do a full Mobile Me refresh?
Message was edited by: the deebs

Similar Messages

  • How do you change the drive that my Iphone backs-up to on my computer?  My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

    How do you change the drive that my Iphone backs-up to on my computer?  My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

    dave0915,
    iTunes stores your iPhone backups in the Library folder in your Home folder.
    iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Create and delete iPhone, iPad, and iPod touch backups in iTunes
    http://support.apple.com/en-us/HT4946
    Regards,
    Allen

  • ICal publishing and invite

    I sent out an invite for my calendar and people got that they needed a password and user name. I don't want to give them my username and password. Can I invite them to see the calendar without giving this to them?

    An interesting though I also had, but never took the time to actually try. It's still very annoying that Apple is not capable of fixing this bug that has been posted on Radar last November and by then already was marked duplicate...
    Here is the redict rule that helped me:
    With serverAdmin in your Site configuration create an entry in the Aliases section of your host.
    Type: Redirect Match
    Pattern: (.*)\.ics
    Path: https://myhost.example.com$1.ics
    Replace the part in italics with your host and domain. Please reagard that you don't need to mention any path for subfolders where you calendar files may reside in. (I use phpicalendar to have a (view only) webinterface for the calendars I publish and subscribe with collegues)
    This Redirect Match will only redirect direct access to .ics files like iCal does or if you download them with a browser. It will not affect the way phpicalendar uses these files to display it's webview of these calendars.
    MacLemon
    Thanks jcw9 for finally trying this out.

  • ICal publishing and privacy

    is it just me, or is there something deficient about the whole 'publishing iCal' thing? I have some questions:
    1. Why isn't my calendar available through my .Mac account?
    2. Why can't I publish my calendar, password protect it, and then view it from a browser?
    3. Why can't I add events to my calendar from the web version?
    If anyone can help me out with these issues, I'd truly appreciate it...otherwise, I'll be looking to get my .Mac subscription money refunded :-((
    -J

    I'm having the same problem, so I offer no help.
    I have seen somewhere that its possible to use iWeb to setup a read-only access to the iCal calendar.
    http://discussions.apple.com/thread.jspa?messageID=4910136&#4910136
    What I expected was to have like the Calendar in Hotmail, but with the ability to use iCal also. But no luck yet.
    I'm beginning to suspect the .Mac/iCal was not built for this.
    For example, If all information is stored in a single file accessed using
    Webdav, how is synchronized access to the file guaranteed?

  • Got My First Ever Macbook! Delighted And Confused!

    Hi guys
    finally i got a mac and thrilled abt it! The controls are a little daunting since been a PC user from grade 9th! I had some very basic questions abt the OS so maybe someone thr can help me
    When I shut the lid, airport disconnects. Is that a bug or its a macbook feature? Anyway can I get rid of this cos I may want to download stuff without leaving the LCD Open.
    The Finder has the Macbook HD and all my dmg files also get downlaoed there. Can I avoid that?
    I have downloaed the firefox and msn utility on the mac and there is an option which says Eject Firefox or Msn. What does it mean by Eject?
    In windows when an Exe file is installed one can get rid of it.However does that hold true of DMG files? Cos when I deleted the firefox dmg file the application stopped working.
    When it opens from sleep, there is whirring sound for 2 secs.is that normal?
    My display settings are at the maximum reoslution and when I use safari the web browser is small, can i expand the web broswe?
    Sorry if the questions sound lame but im clueless here! Though very happy with the macbook:)

    When I shut the lid, airport disconnects. Is that a
    bug or its a macbook feature? Anyway can I get rid of
    this cos I may want to download stuff without leaving
    the LCD Open.
    The only way, as far as I know, to shut the lid and continue to download via wireless would be to connect an external monitor. If you do that, you can close the lid and wake the computer only using the external monitor.
    The Finder has the Macbook HD and all my dmg files
    also get downlaoed there. Can I avoid that?
    You can download files to anywhere you want. When you're in safari go to the safari menu and choose preferences. You'll see an option where you can choose where to download to.
    I have downloaed the firefox and msn utility on the
    mac and there is an option which says Eject Firefox
    or Msn. What does it mean by Eject?
    You can only 'eject' the original white installation folder. Once you've installed the application by simply dragging it from that folder to your applications folder or anywhere you want it to be, you can just eject the left-over white folder.
    In windows when an Exe file is installed one can get
    rid of it.However does that hold true of DMG files?
    Cos when I deleted the firefox dmg file the
    application stopped working.
    As above. Once you've installed the application, it's ok to simply delete the dmg file. But make sure you've installed the application first!
    When it opens from sleep, there is whirring sound for
    2 secs.is that normal?
    Yes, that's the computer checking the dvd drive. When the mac is sleeping all power is cut to these devices and it checks everything when you wake it.
    My display settings are at the maximum reoslution and
    when I use safari the web browser is small, can i
    expand the web broswe?
    yes, just click and hold the lower right corner and expand the window as you see fit. there is also a script that does that which is very useful - http://www.jydesign.com/safari/
    Sorry if the questions sound lame but im clueless
    here! Though very happy with the macbook:)
    No need to apologise. Hope the above helps a little.

  • Can I allow two attempts and after the first attempt have a new window open to a url?

    I would like to allow the user two attempts to answer a question. However, after the first attempt, if they get it wrong, I would like a new window to open that takes them to a tutorial Web site we have, where they can find the answer. Then I would like them to be able to close that window and return to the question for the second attempt?
    Is this possible?
    Right now, I have designed a very clunky version of this. I have one question slide with one attempt and if they answer wrong, they go to the next slide, which has a button to the tutorial page. Then the same question slide is repeated, again with one attempt. In this same scenario, if the person got the question right the first time, they moved on to a new question slide. This works, but is bad for scoring and eliminates the possibility of using question pools and putting questions in random order.
    Thanks,
    Carrie

    100 feet would normally not be a problem......if the AirPorts have line-of-sight with each other......but if there are obstructions like walls, ceilings or furniture in the direct signal path between the AirPorts, little if any of the signal will even reach the extending AirPort.
    Try locating the extending AirPort at about 50-60 feet away to see if can pick up a stronger signal to extend.
    It would be much better if you connect the AirPorts using an Ethernet cable, as there is no signal loss in an Ethernet cable up to 300+ feet.

  • First attempt at Producer Consumer Architectu​re: continuous read and dynamicall​y update parameters​.

    Hello,
    I am currently working with two instruments; an Agilent E3646A and an NI 6212 BNC. My objective is to have the 6212 to be continuously taking measurements according to predefined parameters while the E3646A's parameters can be continuously updated. This simple instrument combination is intended to help me learn the necessarry achitecture; continuous measurement, dynamic output control, and more instruments will be added in the future.
    I've previously posted on a similar, but more complicated, setup (http://forums.ni.com/t5/Instrument-Control-GPIB-Se​rial/Split-second-lag-when-controlling-two-instrum​... and was advised to try the Producer Consumer Architecture. I've found relevant literature on the site (http://www.ni.com/white-paper/3023/en/, https://decibel.ni.com/content/docs/DOC-2431), searched the forums and constructed my own VI. While my first attempt at a Producer Consumer Architecture has resolved some of the issues I was having when I first posted on the subject, however, new issues have arisen with regard to reading and stopping the VI.
    I am currently able to run the VI and update the device parameters. Previously, I would get a freeze while the instrument was being updated and could not toggle parameters until it was done. This has been resolved although the read only updates when a parameter has been updated although it is outside of the event structure. Furthermore the Stop button does not work in any context. I've also gotten occasional errors regarding the Deqeue Element but the bulk of the trouble is Error -200279 "Attempted to read samples that are no longer available" at DAQmx Read. I realize that there is a problem in my Producer Loop but haven't been able to figure out how to resolve it.
    This is my first attempt at a Producer Consumer Architecture and already I can see that it is a powerful tool. I read as much as I could and looked at the relevant examples but expected to have some issues in the beginning. Would really appreciate any advice so I can take full advantage of the architecture.
    Hope to hear from you,
    Yusif Nurizade
    Solved!
    Go to Solution.
    Attachments:
    DCe3646A_DAQ6212_Prod_Con_4_13a_2014.vi ‏89 KB

    Jon,
    Thank you for the response and the suggestions.
    I created the Local Variable for the Stop Button and moved the original into its own Event Case. It is now able to stop VI execution although I get Warning -1073676294 which I understand to be the buffer issue. The warning says that this was incurred on VISA Open for the E3646A's Initialize VI which is outside both loops, however, which I don't understand.
    I tried increasing buffer size by decreasing the Number of Samples as per suggestions I found on NI forum threads. I've brought it down as low as 1 but the graph still only updates when an Event occurs and I keep getting the same buffer error. You suggested that the problem could be that they are in the same loop; does this mean that the DAQmx read should be outside both Producer and Consumer Loops or moved into the Consumer Loop? I found a couple of links ( http://forums.ni.com/t5/LabVIEW/Producer-Consumer-​Design-Pattern-DAQmx-Event-Structure/td-p/2744450 ,  http://forums.ni.com/t5/LabVIEW/Producer-Consumer-​Architecture/td-p/494883 -first response) on dealing with an Event Structure that my own VI is based. Alternatively, I found another link ( http://forums.ni.com/t5/LabVIEW/Producer-Consumer-​Design-Pattern-DAQmx-Event-Structure/td-p/2744450 - first response) on a DAQmx Read with an Event Structure that places the graph in the Consumer Loop.
    The core of my purpose in setting up this Producer Consumer Architecture is so that I could read continuously while the instrument parameters are updated dynamically so it's very important that I understand how this works. I am particularly struggling with how the Event Structure is controlling the While Loop's Execution.
    Hope to hear form you,
    Yusif Nurizade
    Attachments:
    DCe3646A_DAQ6212_Prod_Con_4_14a_2014_Edit_I.vi ‏90 KB

  • IBooks Author. I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

    I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

    The recommendation is always to make another ID for use with a paid books account. And while I can't swear this is at the root of your issue, you should in any case reach out to Apple for assistance on this one, I think.
    Account Applications:
    [email protected]
    Global Phone Support
    We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
    Country
    Phone Number
    Australia
    1300 307 504
    Note that this is a low tariff number.
    France
    0805 540 117
    Germany
    0800 664 5307
    Italy
    800 915 902
    Netherlands
    0800 0201 578
    Spain
    900 812 687
    U.K.
    0800 975 0615
    U.S.
    +1 (877) 206-2092
    Toll-free from U.S. and Canada.
    Good luck

  • If someone trying to call me on there first attempt they can hear that it's busy even if its not and then on 2nd trial it's fine. Or stay busy for an hour or the call failed ,How can I fix it.? iPhone 5, iOS 7.0.4

    If someone trying to call me on there first attempt they can hear that it's busy even if its not and then on 2nd trial it's fine. How can I fix it.?
    iPhone 5, iOS 7.0.4

    Contact the carrier to troubleshoot.  The issue described has nothing to do with the phone.

  • I can copy and paste from mozilla to word in second attempt only first attempt fails and paste a zero sized dot on the word document

    i can copy and paste from Mozilla to word in second attempt only first attempt fails and paste a zero sized dot on the word document.more ever i can not drag fevicon from address bar to my desktop.

    Maybe:<br />
    Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

  • I have images in aperture and in my picture folder that I want to burn to DVD. I need them to be viewable on pc and possibly via a DVD player. My first attempt proved to work only mac. Can anyone help?

    Can anyone help me with burning DVD with images in Aperture and picture folder. I need the to be viewable on pc and DVD player if possible.
    My first attempt only works on mac.

    Eh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved. 
    For future reference.
    My TC is a 3rd gen.
    I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
    The airport utility then signaled to issues remaining:
    1) Internet access was cut - this I solved by simply reseting the cable modem
    2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
    I did have AppleCare....
    I'm online again and I hope for good.
    Thanks a lot
    PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration

  • If someone trying to call me on there first attempt they can hear that it's busy even if its not and then on 2nd trial it's fine. How can I fix it.?

    If someone trying to call me on there first attempt they can hear that it's busy even if its not and then on 2nd trial it's fine. How can I fix it.?

    Hey there holla0,
    It sounds like the person calling you has to call 2 times to get through. The first time they get a busy signal and the second time it goes through. I want to recommend the following troubleshooting assistant for cellular connections to help troubleshoot the issue:
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Start at step 2, and work your way down as needed. Here is step 2 to get you started:
    Reset network settings
    To reset your network settings, tap Settings > General > Reset, then scroll down and tap Reset Network Settings.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Confusion about BI Publisher and Dashboards

    Hi All,
    I am new in BI EE. I create a report in BI publisher and after that I want to publish that report in BI Dashboards...Here my confusion is start, I create repository to the required schema,Now I need to build report again in BI answer?? and then publish that report in Dashboard ????
    Please rectify my confusion I am very grateful to you...
    Regards

    Hello,
    You dont need to confuse. To build the report in BI Answers Report you need to develop repository. To build the reposity you must aware of Datawarehouse modeling so you can build the repository very well. You can save those BI Answers Report. Create a new dashboard and just drag this report to your Dashboard section to run your report in the dashboard.
    For BI Publisher its just a simple query reporting which not depend on any repository. You can create data source connection and build your own query or take help from BI Publisher query builder to built the query for you by selecting proper db objects and joins.

  • My iCal will not let me add new events since Jan. 1,2013. I get an error message that directs me to the console, whatever this is. Frustrating and confusing!!!

    My iCal will not allow me to add any new entries. I get an error message that says I encountered a critical error while saving to data base and directs me to te console whatever this is??? This just started after the first of the year?

    My iCal worked fine on my MacBook Pro so I ran Chronosync between my MacBook Pro laptop and iMac, the problem seems to have disappeared. Both computers have a working iCal now and I have my fingers crossed that they will stay so!!!

  • First time using ical.  Adding an invitee and ical does not accept address

    First time using ical.  adding invitee and ical does not accept address

    CHRIS A123,
    Welcome to Apple Discussions.
    1. Quit iCal, and open System Preferences...>Language & Text>Formats>Region:>reset/choose the appropriate region...also check what you have set in Dates/Times
    2. If that is unsuccessful, I also recommend using the Mac OS X v10.6.2 Update (Combo).
    ;~)

Maybe you are looking for

  • FCP unexpectedly quits when I try to capture HDV footage

    I'm trying to capture HDV footage shot on the Canon XHA1 and my FCP unexpectedly quits every time. I've used this type of footage and camera before with no issues. I've trashed the preferences, tried setting the scratch disk to an external drive and

  • Exchange 2010 Internal Email Delayed for 5 Months

    Today I got an email from a user saying she just received an internal email that was sent November 5th 2013. I tried using Exchange Tracking Log Explorer but nothing shows as being received on 11/5/13 and nothing from todays date that matches the Sub

  • How to use  array of obects  in jsp

    I had passed an array of objects (Bean object) by using request.setAttribute("Bean",req); but how i display the values in my textbox on clicking next or prev button of my jsp. Customer ID      <input type="text" name="customerid" value=<%=req.getCust

  • Format-less Printing of reports

    I need to print a report (Developer 6) without any format. Means just like DOS-base printing. I have a dot matrix printer and require to print my report with defualt draft printing of dot matrix. If any one can help me, just mail me at [email protect

  • I am having trouble opening Firefox. Is anyone else? Are they down for repairs?

    When I try to open Firefox it times out and I get an error message stating there's a problem opening the page. Also, it times out with the following as the page location: http://flyingincognitosleep.com/cgi-bin/h.plp. I can open Internet Explorer. I