First BB and First forum post for Help - UMA on the 8900 - Orange UK

Help!!!
This is my first BB and my first post on a forum.
I got my first BB about 5 weeks ago.  Loving it.  
I got the phone and connected to my home Wi-Fi straight away and the was able to connect using UMA, calls, txt etc.
Today, all of a sudden it will not use UMA, this is a big problem for me as where I live there is terrible network coverage.  The Wi-Fi signal is good, there is a broadband connection, my BB has connected to the Wi-Fi and using the browser it is connected to the Web.
I'm on Orange UK - using BT HomeHub for the Wi-Fi.
Any help would be greatly appreciated.
Thanks 
Solved!
Go to Solution.

I should have read the other posts about this problem sooner!!  
I'm now back and working on UMA.  
Anyone else who has this problem (with common factors), simply turn off, remove battery, turn back on and reconnect with your Wi-fi ( deleting your previous Wifi profile will not hurt!!!) and it should work ok.  It did for me.
Good luck.

Similar Messages

  • When posting for Help on Network Magic Please Include

    Hi All,
    When posting for help on these forums include:
    Your Network Magic Version installed: 4.6.7324.0
    The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.
    The Brand of Modem and its Model Number the router is connected to.
    The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DI-624 Rev. C Firmware 2.70
    The Method of connection your problem computer has to the Router: Wired or Wireless.
    The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, A D-Link DWL-G520 Rev. B
    Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1
    Software Firewall in use: McAfee Personal Firewall 9.0.136 Build
    Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
    Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)
    Post the link to your Router Model, if an off-brand Router or not found in the USA on the Manufacturer's USA's Website. (Why? Posters helping each other, aren't working for Pure Networks or Network Magic, so make it easier on the posters helping on.)
    And any other information you think is important if answering your own post, and the nature of the problem, itself.
    By posting all this information, you can hopefully get help from someone that has the same equipment that you have and theirs is working. Not everyone has the same equipment.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

    mhchiang,
    If you have multiple systems that all show the same symptoms,
    then it is probably not a problem in the computers.
    You may need to investigate the rest of your network hardware
    and your campus network software.
    Your campus network administrators may have made some recent changes.
    Ethernet switches may have power supply problems, or they're getting old.
    Firewall software may heve had recent changes to its configuration.
    If the cabling goes over long distances, from building to building,
    there may be damage to wiring.

  • Dear Apple I buy a refurbish iPhone 5s the IMEI ******* and ICCID ******** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.  Best regard

    Dear Apple
    I buy a refurbish iPhone 5s the IMEI ******** and ICCID ********** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.
    Best regard
    <Edited by Host>

    This is a user forum. You aren't talking to Apple here.
    Return your iPhone for a refund. There is no way to remove the Activation Lock. Apple won't get involved.
    <Edited by Host>

  • On my iphone 5 ios8, i have an apple id for App store and a defferent id for Icloude. i forgot the pw for the icloude id. how can i reset or delete icloude ?

    on my iphone 5 ios8, i have an apple id for App store and a defferent id for Icloude. i forgot the pw for the icloude id. how can i reset or delete icloude ?

    Greetings chaimba216,
    After reviewing your post, I located an article that can help with resetting your iCloud password:
    iCloud: Change your iCloud password
    Your iCloud password protects the privacy of the information (such as your email) stored in iCloud. Your password also protects your ability to locate or remotely erase your device using Find My iPhone. You should regularly change your iCloud password to protect your information. Your iCloud password is the password for the Apple IDyou use to sign in to iCloud.
    Important: If you use the same Apple ID for iCloud as you do with other Apple services such as the Apple Online Store, iTunes Store, App Store, or to purchase products in iPhoto or Aperture, changing your iCloud password also changes your password for these services. Make sure you sign in to those locations using your new password.
    Go to the My Apple ID website (appleid.apple.com) and follow the instructions to reset your Apple ID password.
    For more information, see the Apple Support article Apple ID: Changing your password.
    After changing your iCloud password, make sure you update it on all your devices and in any email apps you use to get your iCloud email.
    On your iPhone, iPad, or iPod touch: Go to Settings > iCloud, then tap your iCloud account.
    On a Mac: Choose Apple menu > System Preferences, then click iCloud.
    On a Windows computer: Open iCloud for Windows.
    In your email apps: Check the help provided for the email apps you’re using.
    If you set up iCloud on your iPhone, iPad, or iPod touch, make sure to set up a passcode lock on your device for added security. (Go to Settings > Passcode or Touch ID & Passcode.)
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • After I update to ios5 and I am trying to update my apps on my ipod and its asking me for my password but the username has my old username on it

    After I update to ios5 and I am trying to update my apps on my ipod and its asking me for my password but the username has my old username on it

    You can go to Settings>Store and log out of one account and log into another.  However, apps are tied to the account that originally purchased them.  You have to use that account to update them.  Also, if you have apps from more than one account that need updating, you have to update them individually using the correct account until the ones left are from only one account.  Then you can update all.

  • Please I'm frankly tired and in need of your help to activate the iPhone5 it does not account Icloud Old I know of has been good, I did not get before Fargo as a result of your help and thank you and appreciation

    please im tired and in need of your help to activate the iphon5 it does not account icloud old iknow of has been good, idid not get before fargo as aresult of your help and thank you and appreciation

    please im tired and in need of your help to activate the iphon5 it does not account icloud old iknow of has been good, idid not get before fargo as aresult of your help and thank you and appreciation

  • Find an iphone 5 in the club and i want you to help me find the owner and return it to the user.  its been erased and no sim card in it .when i try to configure , it says i should enter an apple  and a password.

    find an iphone 5 in the club and i want you to help me find the owner and return it to the user.
    its been erased and no sim card in it .when i try to configure , it says i should enter an apple
    and a password.

    Since it was erased and no sim card the owner probably got rid of it of some reason.

  • Hi All  I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first? Thanks for help

    Hi All
    I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first?
    Thanks for help

    The language(s) that a film is available in should be listed on its description page in the store e.g. (this is from a Mac's iTunes, I don't have Apple TV so I'm not sure if you see the same description pages) :
    If a film doesn't have any alternate languages or subtitles then you will just see the 'primary' language mentioned.
    If it is available in other languages, then to select it when playing it : iTunes: Language settings for video

  • 1st generation MacBook, battery and Leopard issues; looking for help please

    I have a 1st generation MacBook that started having battery problems immediately after installing Leopard. it was the same issue many others have complained about; battery life shortened and shutting down while on battery power with no warning. I have never had that problem while using Tiger. I experienced this with both 10.5.0 and the stand alone upgrade of 10.5.1 using an erase and install method.
    (BTW, as a side note: I'm religious about calibrating my battery every month and use a program called "CoconutBattery" to document the results. Prior to Leopard, the battery measured 97-99% capacity. Three days after Leopard was installed it was time for another check, the result was 74% capacity.)
    I had a clone backup of Tiger and immediately restored my MacBook, but the problem followed Tiger. I have Applecare and called support. Both myself and the tech found it rather hard to believe that the battery just suddenly failed coincidentally after the Leopard install. We went through the regular things; SMC reset, firmware checks, diagnostics, repair permissions, etc.
    We believe it has to do with the Battery Updater package. I had gone between both versions of 1.2 and 1.3, but the problem remained with both Tiger and Leopard. The tech decided to send me a new battery (it's on the way) and I wish to try installing Leopard again. As long as I have my cloned Tiger image, all I have to lose is my time, but hopefully, not another battery! I would honestly like to get Leopard running on this machine.
    But... here's my question. In reading through these discussions in both the Leopard and MacBook forum, there doesn't seem to be any consensus of which BatteryUpdater package to use. The Apple tech honestly told me he didn't know. Also, if the BU package "writes" to the battery (which it states it does), can it be downgraded once v1.3 has been installed? I mean, should I leave the battery out, install Leopard, then manually update BU to v1.2 before installing the battery (if possible)? I do plan on testing the new battery with my Tiger install, just to verify it is working as it was before.
    There are a lot of people here claiming to be knowledgeable about Leopard, never had any problems with a variety of machines, etc, etc, so I would appreciate your input. Please don't speculate, but if you're using a version of BU that works with Leopard and your 1st Gen MacBook, I would appreciate you telling me about it. I have tried to document and methodically relate everything I've done so far, but if you need additional information, just let me know.
    I noticed Leopard had installed BU v1.3 when I checked it, so it must use that as default, since I noticed Tiger had v1.2.
    OR, am I way off base on this? Can anyone think of another reason I may have had this problem? Am I barking up the wrong tree by concentrating on the BatteryUpdater package? Is it possible all these batteries are failing under a Leopard install maybe due to some unknown reason?
    Any knowledgeable advice or suggestions are welcome, thanks!

    Well, Ding Dang y'all... it appears the battery was the culprit. I received my replacement battery from Apple and followed the same steps and everything seems to be working fine.
    It sure was strange that the battery started this problem immediately after Leopard was installed... I don't know what to say about that, unless BatteryUpdater v1.3 started the chain of events.
    In case it helps someone else, here's exactly what I did (rebooted through each step):
    - Backed up data; unauthorized computer from iTunes
    - Erase and install from the Leopard disc, while keeping the old battery in
    - Installed Leopard, did software updates except for delta 10.5.1 update
    - Applied combo update of 10.5.1 from separately downloaded file
    - Found BatteryUpdater Bundle (BU) of v1.3, moved to trash, rebooted
    - Ran software updates, BU v1.2 was found and installed
    - Then, swapped out battery to new battery
    - Tested unit, seems to be okay now, no shutdown issues, battery runtime seems normal
    Thanks to all that had advice and suggestions. It was enough to get me to try it again. Now, I have two more machines to upgrade, since these are production machines, I'll probably wait awhile. But, having this is a real treat.
    Have a great holiday everyone!

  • E-Commerce Gateway and EANCOM D96A - request for help

    Hi All,
    I have no experience with e-Commerce Gateway and hence the following questions.
    We have a customer who is looking for a quote for the following:
    1. On Ship Confirm of an order, an Advance Shipment Notice (ASN) needs to be generated and sent to the customer visa EDI; and an SSCC pallet label needs to be generated
    2. We had assumed that the ASN is a x12 856 DSNO – but it turns out that the required document is a EANCOM D96A
    The questions I have are:
    1. Does anyone have experience in implementing a solution to the aforementioned problem using e-Commerce Gateway?
    2. If yes, what is the best approach? The way I see it is, e-Commerce gateway can be configured so that on Sip Confirm, an EDI message is generated and dropped into a pre-configured EDI outbound folder/directory. We then expect that a third party translator is used to pick the message from the outbound folder, translate it, and send it to the recipient. Do I understand correctly, or am I missing something?
    3. Re: #2 above, is there a preferred third party translator in the UK? I found that GXS provides gateways/translators for eBS which seem to be referred to in quite a few forum/blog posts
    4. Again Re: #2 above, is there a preferred solution method avoiding third party translators and using a custom built SOA object - a BPEL process maybe? (Assuming the customer has SOA suite licence)
    5. While e-Commerce Gateway supports 12x 856 DSNO, I cannot find any document to suggest that it supports a EANCOM D96A. Any comments?
    Btw, I have skimmed through the e-Commerce Gateway implementation guide and users guide, and I still have this questions :-)
    I know this is a lot of questions. Would highly appreciate any kind of answers to/pointers regarding any/all of my questions
    Regards
    Kiran
    PS: I have posted the same question in the "Technology - Integration and Events" forum. Repeating here hoping it reaches a different audience. If you are seeing this twice, apologies for the trouble!

    Hi Kamleshwar
    You can replace both of them by taking the data from b2b and putting them to staging tables( in case of orders) using integration tools like bpel or writing simpel PL/SQL to dequeu message from ques. One the data is in staging then u can write concurent porgrams
    This approach is good if you have lot of customizations to be done.
    But if you want to follow the standards then use XML gateways/ECG gateways. Its just need confugring(like TP) and you get the whole bunch of data. ECG generates .dat files and u need some transaltor to read these files and then load to b2b.Same goes with XML agetways. ECG and XML getway both have there own benifits, best of XML ebeing we get evrything in XML format making it easy to translate
    Regards
    Sahil

  • Hi, am marvie. 1st time on the forum asking for help

    I was using the BB 8520 curve before, and now I've bought a BB 9300 curve. The problem's that I can't get access to the BB app world with this new phone. It says the email that I'm using already exist, I'm using my old email and password that I was using whilst I was still using BB 8520 curve. Please help because I can't get any access to app world with my new phone.
    Solved!
    Go to Solution.

    marvie wrote:
    And when I try to create a new ID it says: an account with this email address already exists. Please use a different email address.
    Exactly as expected...you cannot create something that already exists.
    marvie wrote:
    When I log into my existing BB ID with this new device it kepts saying: an error has occurred. Please try again later.
    While not quite exact, please refer to the remedy steps listed in this KB:
    KB25882 "An error has occurred. Please try again later" is displayed when the user attempts to login to BlackBerry App World
    Also, are all voice-related services working fine? Voice calls? Voice Mails? SMS?
    Are you subscribed, from your mobile service provider, to a plan that enables the BB-proprietary data services? Typically, a generic data plan is not adequate...a BB-specific plan is required.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I swear I've read the FAQ and past forum posts

    <SPAN>Hello all,
    <SPAN>As I said above I have spent time reading the FAQ and past posts, I have found some very useful comments and have learnt a lot (for me anyhow), my problem is this.
    <SPAN>I want to connect a soundcard to an external home cinema amp\decoder via a digital connection, either coaxial or optical is fine..
    <SPAN>I currently have an Audigy LS but am prepared to trade this in for a better model if that?s what the majority of people think is best..
    <SPAN>As I understand it I can pass the stereo signal through my card and digital cable into the external box for decoding into 5. for ac3\dvd movies etc.. Now this is the part where I get lost, apparently this cannot be done for games as EAX is needs to be decoded at the card for the 5. to work, if this is sent via digital I only get stereo, right?
    <SPAN>So the big question is, how do I get both to work in 5. with the same external amp\decoder?
    <SPAN>Thanks in advance for any help, and as I said I have looked through past posts for an answer but I don?t seam to be able to find a definiti've answer.
    <SPAN>K<SPAN>

    you can ONLY pass multichannel signals to a receiver if the original signal is multichannel.
    basically, what's working: DVD, AC3 files, stereo streams...
    what's not working: games (as the stream is computed by the card and isn't ready to be read).

  • What happened to my earlier post for help

    Oh and by the way, problem has now been resolved

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click on any checkbox will select or unselect them all - and you should then have continuous playback.

  • Looking for help to update the certificate for my Exchange Email Account...

    I'm trying to update the certificate for my Exchange Email Account...Dell had me delete the account, install the new certificate on my phone, and set up the email again...But it still won't work and acts like it can't find/use the new cert.  Any suggestions besides a hard resest of the phone?

    That's a great question, LSchmitz!
    Is the e-mail account on your cell phone? Which device? If its on your phone, an Exchange e-mail, may need to be provisioned/ set up by your employer/ IT department.
    VanessaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for