First boot does not work

Hello everybody,
Today i decide to do a bench pc test to my Msi z97 gaming 9 ac with I7-4790k and AMD R9 290x as i am waiting for my case to arrive, and start my pc.
I did the bench pc test finally after reading the manual, but my tv with hdmi cable can not recognize any thing, and it keeps showing "no signal". I am a bit worried about missing something, but every thing is working cool without any problems, i can hear the fans, and mother board lights as well as my GPU. I am concerned about what i am hearing from others bending pins in motherboard, but this is my first experience, and i placed the cpu smoothly. I need help guys as i am waiting for my case to arrive. Ram is kingston beast 2400mhz 2 pieces 8GB in slot 1 and 3. Thats it waiting for your solutions guys.

Quote from: Sea Dog on 09-July-14, 03:29:01
0x66 CPU DXE initialization (CPU module specific)
Something is amiss with the CPU. Double check the 8-pin PSU power connection to the mainboard. The CPU may need to be removed and the CPU socket inspected with a bright light and magnifier for any bent pins.
checked the cpu socket there is no bent pins.... and 8 pin psu power is connected to cpu section, but i am worried about something which is the PSU it supports 16A/250v but in my country we are using 10A/240v does this consider a problem ?

Similar Messages

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Change password on the first use - does not work

    Change password on the first use - does not work.
    Created a user and specified 'Change password on the first use' - when user logs in - the 'Change password' window does not pop- up.
    Please advise.

    (APEX 4.0.2) I am running into this same issue - if you don't set the password expiration and locking to 'Yes', the user gets into the app without being asked to change the pw.
    When you do set expiration and locking - after the user logs on with their temporary password, it does take them to the change password page (4155:50) but the username is blank. Because the username didn't get to the page the old password will never match and you get the "Invalid password" message.
    What am I missing? Anyone successful doing this?
    Simple application, default authentication, no javascript, HTTP_SERVER, no ssl.
    Thanks,
    Steve

  • Change Password on first use does not work properly.

    I have created apex application user in Oracle Apex 3.2 as follows
    BEGIN
    APEX_UTIL.CREATE_USER(
    p_user_name => 'NEWUSER1',
    p_web_password => 'secret99');
    END;
    As in the documentation
    p_change_password_on_first_use  IN      VARCHAR2    DEFAULT 'Y',
    User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
    BEGIN
    APEX_UTIL.CREATE_USER(
    p_user_name => 'NEWUSER1',
    p_web_password => 'secret99',
    p_change_password_on_first_use =>'Y');
    END;
    Still does not work. How can I ensure user to change password on first login.
    Hasan Al Mamun
    Programmer
    Bangladesh Bank
    Dhaka, Bangladesh

    Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
    ** NOT TESTED **
    declare
    v_first VARCHAR2(10;
    v_session NUMBER;
    begin
    v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
    select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
    if v_first = 'Y' then
    wwv_flow_custom_auth_std.login(
    P_UNAME => :P101_USERNAME,
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v_session,
    P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
    else
    wwv_flow_custom_auth_std.login(
    P_UNAME => :P101_USERNAME,
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v_session,
    P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
    EXCEPTION WHEN OTHERS THEN
    *** handled **
    end;
    The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
    Not sure if it meets your setup.
    Ricker

  • USB Boot does not work on factory fresh device

    SO we're working on adopting the surface pro 3 for our organization. I've just run into an issue. We're currently bootstrapping the SCCM OSD process off of USB thumbdrives, we have are working on upgrading to a supported PXE platform, but for now we have
    to use the thumbdrives. The issue is, on a fresh, out-of-the-box Surface Pro 3, the Power-button + Volume Down will NOT boot of of USB. The only thing that works is to keep booting in the factory sysprep until it finally asks to take you to advanced recovery
    options where you can then select the USB device and it works fine from there. After the device has been imaged, the volume down + power trick works every time, just not when straight out of the box. This is obviously an issue fore the guys doing the imaging
    as it slows them down considerably. Any ideas why this is happening?

    That sounds rough...  I have new surface pro 3 devices and haven't encountered this problem.  If I had to speculate, I would say you have a firmware issue. 
    Try this to confirm.  Let the device boot up into the out of box image, and then let windows update patch the thing to completion and try again.  Not all that comforting if indeed you have this problem... did you purchase them a few months ago
    and are just now firing them up?  Maybe the ones we have here have a later firmware. 

  • Call Transaction Skip First Screen does not work

    I want to use 'Call Transaction' to execute the transaction /sapapo/scc_tl1 in Change Mode.  I want to  skip the first screen.  I have added 'and skip first screen' to the CALL TRANSACTION but it still stops on the first screen.  The first screen has three buttons: Display, Change and Create.  The function key assigned to Change is F6.  What is the code to select the F6 key so the first screen can be bypassed.
    Thanks and best regards,
    Sandy

    THE ONLY THINK U HAVE TO DO IS RECORD THE TRANSACTION FOR
    CHANGE MODE. AND FILL INTERNAL TABLE OF TYPE BDCDATA AND CALL TRANSACTION.
    EXAMPLE: I CALLED SE93 IN CHANGE MODE. COPY AND RUN THE FOLLOWING PROGRAM, U CAN UNDERSTAND WHAT IAM TELLING.
    REPORT ZTESTH messAGE-ID ZV.
    DATA: IBDCTAB TYPE TABLE OF BDCDATA WITH HEADER LINE.
    IBDCTAB-PROGRAM = 'SAPLSEUK'.
    IBDCTAB-DYNPRO = '390'.
    IBDCTAB-DYNBEGIN = 'X'.
    IBDCTAB-FNAM = 'BDC_OKCODE'.
    IBDCTAB-FVAL = '=CHNG'.
    APPEND IBDCTAB.
    IBDCTAB-PROGRAM = 'SAPLSETX'.
    IBDCTAB-DYNPRO = '0120'.
    IBDCTAB-DYNBEGIN = 'X'.
    IBDCTAB-FNAM = 'BDC_OKCODE'.
    IBDCTAB-FVAL = '=NEXT'.
    APPEND IBDCTAB.
    CALL TRANSACTION 'SE93' USING IBDCTAB.

  • "Revert to Original" does not work.

    I recently upgraded from iPhoto 4 to 5 (5.0.4). While browsing, I decided to revert some edited photos (edited in iPhoto 4) back to their original state by using the "Revert to Original" menu item. I got a confirmation dialog which I clicked "OK". Nothing happened! The "Revert to Original" menu item was not grayed out after this attempt so I repeated the process no to avail. I have verified that the original/unedited file is in the "Original" folder inside the iPhoto Library folder.
    I am able to revert to the original if I edit a previously unedited photo in iPhoto 5 for the first time. The problem seems to be limited to just those photos that were originally edited in iPhoto 4 and then converted to the new iPhoto 5 library.
    Any ideas?

    Mike:
    First try manually setting the permissions on your iPhoto Library folder and contents as follows:
    Setting Permissions for iPhoto Library Folder
    1 - Select the iPhoto Library folder and type Command-I.
    2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
    3 - Then click on the "Apply to enclosed items..." button.
    If that doesn't help you can, after making a duplicate copy of your iPhoto Library folder, rebuild the library by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options but the last one, orphans may bring in those non-recoverable originals as new files. You can select it or not. If you have a large library you might want to to save having to go back and redo in case the first rebuild does not work.
    OT

  • My Apple TV (2nd Gen) woun't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..

    My Apple TV (2nd Gen) won't boot it'a a blinking fool, and Reset does not work... Is it time to by a new WD Live or is it just me? Thanks All..
    If I mess this up ... sorry it my first time....

    I found this after posting here:
    http://trick77.com/2011/02/04/apple-tv-2-with-white-led-flashing-blinking-fast/
    It appears that this is due to firmware corruption and you can fix it by using the micro USB cable and hooking it to iTunes.  I have not tried it yet but supposedly several people were able to resolve their problem this way.  If you do try it, let me know.  I don't have the cable at this time.

  • Hello, I am trying to upgrade to yosemite, but I get the "disk cannot be used to startup your computer" error. Resizing the partition does not work, I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot

    Hello, I am trying to upgrade my macbook pro to yosemite, but I get the "disk cannot be used to startup your computer" error.
    Resizing the partition does not work for me and I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot and the disk manager is lost.
    Anyway to tell the yosemite installer that it should not pay attention whether the disk is bootable or not ?
    If I am doomed, any way to delete the installer and downloaded OS from my hard drive ?
    Thanks for your help

    As usual, the Linux installer wrecked the partition table. You would have to boot from your OS X installation disc and repartition. Doing so will of course remove all data from the drive, so you must back up first if you haven't already done so.

  • HT203167 My iTunes Match does not work, it stops after the first step and won't do anything else!!!

    Hello, I purchased iTunes Match for my new iPhone five and it is intended to move the music from my computer to my other computer, but it stopped working on my MacBook Pro, it stopped after the first step. So, my question is, can iTunes Match work if the iTunes in question has other accounts attached to it, of not, can I get a refund on a service that does not work?

    I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

  • Unable to install "Mavericks" as it asks for my 'Admin Password" and it does not work. Have not used it since I got my iMac in 2008. First upgrade to do so. Any solutions please?

    I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safely tucked away so entered it, it rejected it each time. Am sort of lost now, as if my "Admin P/W" does not work here can I go from here?
    I have seen many others with this problem but so far most of the solutions seem to be for the "log in" or "User" password not the Admin one.
    I am running Mountain Lion successfully.
    I have my original disks as supplied and also a Snow Leopard install disk.
    I have seen some info about fixing this via Lion Recovery partition which I must have due to using Mt Lion.
    How can I repair this situation.
    Thank you to all those who respond.

    Thanks for your reply.
    I have visited both the sites you listed but it seems to me that the solutions mentioned are to fix the User or log in p/w's.They do not seem to refer to the admin one again.
    I understand about it being just like other user accts but the fixes do not really refer to it only the above two.
    I have no problem booting up my Mac, I do not use a log in p/w so my problem is with the Admin p/w that was set up back in 2008. This is what I need to reset etc.
    I am quite confused over these pw's as to just what is what and I need to make sure I understand all before I get into deeper trouble following these links.
    This Admin p/w that was set up has never been used and is the only p/w I have except for my Apple ID. All previous upgrades only required my user name log in which has no p/w set up.
    I hope you can follow me here butI have read so much on this it is becoming very confusing about whcih p/w's are what.

  • My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    Hello wilsontot_too,
    Thank you for the details of the issue you are experiencing on your iPhone.  It sounds like you are not noticing transparency on your iPhone.  It may be that you have "Increase Contrast" turned on in your iPhone settings.
    I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
    iPhone User Guide - Large, bold, and high-contrast text
    http://help.apple.com/iphone/7/#/iph73b89c6
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS1381 My left arrow does not work on my macbook pro(model A1226).  I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work)  - HELP!!

    My left arrow does not work on my macbook pro(model A1226).
    I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow). 
    In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work. 
    I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
    Here is the kicker!  In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
    I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
    Can anyone think of any other rabbit holes I can search?
    thanks and regards
    vats3

    I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

  • My MacPro 1,1 will only boot if I resert PRAM each time, and then that does not work each time. When it does boot all is fine. Any idea before I head off to genius bar.

    To boot my MacPro now, I have to go thru the reset Pram. Doesn't work each time. I usually don't turn my machine off. Booting in Safe mode does not work...when it doesn't boot I get only a gray screen, no icons in the screen like bad disk etc. I have replaced the battery. My professor son tells me to setup a new drive internally and install a new system and see if the new OS works. I have 3 internal drives with all data on bays 3 and 4... Bay 1 is the system drive with apps only. I'm 70 miles from the closest Apple store and thought I would ask tonight before driving in.

    Replacing the PRAM ("backup") battery on the machine may be needed.  Here's how, go to page 50 of the user manual:
    http://manuals.info.apple.com/en_US/Mac_Pro_User_Guide.pdf

  • I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate? I am in Delhi, India.

    Hi,
    I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
    Satish

    would be best if you can download the guide here
    http://support.apple.com/manuals/#iphone

Maybe you are looking for