First build issues with Thermaltake case connections

I have a Thermaltake Tsunami Dream case with single pin connectors for ieee1394 Firewire and Audio front panel jacks. I've been wondering if there isn't some kind of block plug that fits the MSI Headers? Then I could fit the single pins into the block connectors before plugging into the mainboard.
That would be much easier than trying to fit the single pins into the mobo after it is in the case, wouldn't it? Is there any such single pin to block connector?
The single pins pigtails are because the mainboards don't make standard headers, so it would seem to be something that should be included with the motherboard retail package, shouldn't it?
Seems like such a small item that could save so much trouble for new builders.
Also, the front USB2 connectors are two 5-pin inline blocks that seem to combine into one 10 (or really 9) pin header. I'm reading that one of the grounds (pin 10) must be disconnected in order for the usb ports to work correctly. Is that correct? If so, why is there not an adapter for that also?
It would be a simple thing to include the correct block connector for the usb fron panel connections that are non standard to the MSI blocks, and then so many people wouldn't be screaming about usb not working, or audio problems with the fron panel connections.
I just don't understand why such easy problems to fix aren't included with the retail box?
But then what does a new builder know? I'm just asking for opinions from those who know the way of these strange things.
Oh, and if there are such block to single pin adapters, who makes or sells them? Maybe Newegg? CompUsa?
Thanks for any feedback.

onebyte ,
Given the variety of different pin outs used by both case & mobo manufacturers I prefer the single pin solution to ensure usb & 1394 setup is correct. Having spent some time over xmas moving to a new case with these connectors I have some sympathy with what you say. I actually used cellotape to bind the pins into pairs which made inserion easier.
But yes a small plastic frame through which the pins could be placed and held together, then inserted to the Mobo header would be useful.

Similar Messages

Issues with our SSL connection to the Web dispatcher

HI Alle,
I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
[Thr 368] =================================================
[Thr 368] = SSL Initialization on PC with Windows NT
[Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] =   found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
[Thr 368] =   found SECUDIR environment variable
[Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 368] * ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
[Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 4129 (0x00001021) = "The PSE does not exist"*
[Thr 368] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] << -
End of Secude-SSL Errorstack -
[Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
[Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 368] =================================================
[Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
[Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
[Thr 2128] IcmCreateWorkerThreads: created worker thread 0
Regards

Hi Olivier,
Thanks for replay,
The PSE does exist in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" .
I did tried Again I get this error. I think I missing som parameter
= SSL Initialization on PC with Windows NT
[Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 2292] =   found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
[Thr 2292] =   found SECUDIR environment variable
[Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
[Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
[Thr 2292] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
-*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
[Thr 2292] << -
End of Secude-SSL Errorstack -
[Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
[Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 2292] =================================================
[Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
Her is my profile parameter for https.
h6*#Https parameters for Web dispatcher E:\usr\sap\WDP\W00\sec
#icm/server_port_0 = PROT=HTTPS,PORT=443$$
DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssf/name = SAPSECULIB
wdisp/ssl_encrypt = 0
icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
icm/HTTPS/verify_client=0
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/ssl_auth= 0
ms/https_port = 8400
wdisp/HTTP/use_pool_for_new_conn=1
wdisp/HTTPS/dest_logon_group = HTTPS
#wdisp/server_info_protocol = https
#wdisp/group_info_protocol = https
#wdisp/url_map_protocol = https
wdisp/ssl_ignore_host_mismatch = fals
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
Regards

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

Serious issue with MacBook internet connectivity

I have owned a 2009 MacBook since around 2011, when I bought it new. Since then, I have had several relatively minor issues with it, including common ones with the trackpad malfunctioning (it needed a new battery). Since last night, however, it's ability to connect to the Interwebs has suddenly vanished. It's not like the cause of my problem is a huge mystery; there was another problem involving the apparent 'simulated' holding down of the power button, making it impossible to turn on without force shutting down after a few seconds. This seemed to resolve itself eventually, after I sat up too quickly and it narrowly avoided being badly smashed on my floor when it tumbled off of the futon. Ouch. However, there was a minor bump before I was able to catch it. I worried that it would be broken, but it actually managed to somehow resolve my previous issue with random shutdowns when it turned on. After this, though, I was stymied by it's inability to connect to the Internet at all. I tried WiFi, Ethernet, circumventing the router with another Ethernet cable, and many other possible fixes. No luck. I'm currently typing this on a seperate computer, which has got internet connectivity with wireless on the same network. With the wireless connection, which was working before the power button incident, I am able to see the network and connect, but then I can't actually resolve my connection. In the native internet support program, I am reportedly able to connect to the network and ISP, but not the internet or test server. I have contacted my ISP, and they vaguely insinuated after half an hour on hold that it should be working just fine. Very oddly and suspiciously, whenever I try to open the normal network control panel in System Preferences, the pane blinks briefly and stops responding, to the point that I left it loading and went to bed. This morning, it was still attempting to load that preference pane, and I'm really pretty confused. What is going on? In case it helps, the corner that hit the floor was the upper right hand one, I have to think that it may be a hardware issue, since I've spent quite a bit of time on software fixes. This is my first question to the community so far, so if I've misplaced it or doen something wrong, I apologize.
Thank you in advance!

I have a MacBook Pro that I purchased in April 2007 and am having exactly this issue. I went to start up a program, my screen went black and the computer crashed. I rebooted and my screen had the diagonal lines as in your image. I believe it booted up properly once or twice but crashed again before long. Repeatedly now, the ugly lines are there, the boot up screen shows up in the background and eventually it gets to a blank blue screen and nothing else happens. Sometimes it just shuts down. I did get the install disk and try the hardware test by booting up the disk and holding down the "d" key. The first time I did this it kind of made the screen clear up and reported that there were no hardware problems. I restarted from there and actually had my computer back for about 15 minutes. Then it died again The hardware test didn't have the same impact the second time I tried it but still reported no problems. Still stalling at the blue screen. Does it have something to do with Leopard 10.5.8?? I updated to that a couple of weeks ago. Seems kind of random and inexplicable. Oh and I actually saw a wee puff of smoke at one point near the power button. Is something frying? I really would like to figure it out so A) I can rescue all my stuff that's on that machine and B) if I can fix the problem the computer will still be of use.

Dispatching GridSelectionEvent throw exception at runtime - A build issue with FB 4.5

This is a strang probelm I am facing with.
My code dispatches GridSelectionEvent after setting girds' selected item in one logic path. Following is code lines -
myDataGrid.selectedItem = instanceTag;
myDataGrid.dispatchEvent(new GridSelectionEvent(GridSelectionEvent.SELECTION_CHANGE));
Flash player throws following error on above statements encounter -
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at spark.accessibility::DataGridAccImpl/eventHandler()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()
I am saying it is a strang for me because when I use swf file generated by Flex Builder (4.5)'s export to release build, it does not throw error and code works fine as expected.
But, when I user swf file generated by Ant script, I face the above issue.
The Flex builder settings is as shown in following image -
Ant mxmlc script is as follow -
<mxmlc
           file="${basedir}/src/AppMonConfigWizard.mxml"
            static-rsls="false"
           keep-generated-actionscript="false"
           output="${basedir}/bin-release/AppMonConfigWizard.swf" >
     <locale>en_US</locale>
      <load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/>
      <source-path path-element="${FLEX_HOME}/frameworks"/>
      <source-path path-element="${basedir}/src/locale/{locale}"></source-path>
      <compiler.library-path file="${basedir}/../wizard_framework/bin/wizard_framework.swc" append="true"/>
     <compiler.library-path file="${basedir}/../../utils/bin/utils.swc" append="true"/>
      <include-resource-bundles>ErrorMessages</include-resource-bundles>
      <include-resource-bundles>Strings</include-resource-bundles>
</mxmlc>
As mentioned earlier that following statements cause exception -
     myDataGrid.selectedItem = instanceTag;
     myDataGrid.dispatchEvent(new GridSelectionEvent(GridSelectionEvent.SELECTION_CHANGE));
If I change it to
     myDataGrid.setSelectedIndex(<some index value>)   /*selectedItem replaced with setSelectedIndex*/
     myDataGrid.dispatchEvent(new GridSelectionEvent(GridSelectionEvent.SELECTION_CHANGE));
it does not throw exception. I would like to mention that myDataGrid.selectedItem = instanceTag; does sets the selected item but then in that case issue arises when dispatching event.
I my application, similar statemetns were lot at many places (as there were no such issue with SDK 3.1 which was using earlier) so instead of making changes there, it would be better to imitate the build that Flex builder uses when exported the release build.
Thanks in advance,
Prithveesingh Zankat.

Solved it: had set the only public surface contracts checkbox by mistake and the cosntructor was protected...
Luis Abreu

X200 WWAN (f3507g) compatibility issue with Juniper Network Connect VPN

I have just recently received my X200 with the build-in WWAN which is a Ericsson f3507g card and found that it causes my Juniper VPN software unable to load, and I have also noticed other applications like Outlook is rather slow. When I "Disabled" the WWAN card in "Device Manager"->"Network Adapters", all apps work perfectly. I am using 32-bit Vista Business.
Can someone test and see if you have the same problem as mine? I am wondering if this is a driver issue of the f3507g WWAN card.

Hello
I have just spent all day trying to work out why Outlook takes forever to connect on initial start. It was purely by luck/perseverance that I happened to notice an "ipconfig" stuck for a second on LAN2 - which is the ericsson card.
I too then disabled this adapter and found Outlook performance cured. I had popped along to these forums to find a fix but at least I can verify the issue with you.
Bloody annoying since I've only had the X301 1 day - I bought it for use whilst my X300 is having its wireless-freezing issue sorted. Not a good advert for Lenovo I think.

HP Pavilion 15t Issues with Limited Internet Connectivity on Windows 8

So, I just received my new HP Pavilion 15t-e000 CTO Notebook PC last week, it runs Windows 8, & it's a 64 bit.
The only problem I've had is staying connected to my wireless Internet. The connection will cut out at random intervals saying "Limited" instead of "Connected". I constantly have to disconnect and connect to my wireless Internet. It is especially frustrating when I am trying to download something that takes longer than a couple of minutes because the Internet connection cuts out and I have to start the process all over again.
I have tried pretty much every "fix" people have posted that have worked for some people. No such luck for me. Sometimes it seems like it will stay connected and then I try to connect to a web page or download something and it goes out again.
- Turning off the "Allow computer to turn off this device to save power" under Power Management in the Properties section of my Wireless connection.... DID NOT WORK
- Using the command prompt to reset the network adapter ... DID NOT WORK
- Running the Network and Internet and whatever else Troubleshooters ... DID NOT WORK ***Update: If I run the network connection test via the HP Help/Support center on my desktop while the connection says Limited, I receive the notice that the "default gateway was not available" and the router was reset and issue fixed, etc. BUT, if I run the test while the wireless says Connected, the test always says there is no problem. And even though the test "fixed" the issue, it didn't because the Internet always cuts out again.
- Windows Updates has installed new updates a few times ... DID NOT WORK
- Forgetting the Wireless Network and Setting it Up as a new one again ... DID NOT WORK
- Using my computer right next to my wireless router ... DID NOT WORK
The wireless router being used is: Cisco Linksys Wireless-G 2.4GHz Broadband Router and our network is WPA with a security code. We also have a SpeedStream DSL Internet thing (sorry, I don't know what it is called). The compatibility center says this router is compatible with Windows 8 by the way. Other computers running Windows 7 and Windows Vista, iPhones, and iPads all work fine.
My laptop uses Intel(R) Centrino(R) Wireless-N 2230 and the light is on and it always says "device is working properly" in Properties.
Any help or suggestions would be greatly appreciated because I am at my wits end.
Thanks
This question was solved.
View Solution.

So, it seems my issue with the Limited Internet connection has been resolved. I didn't use my computer for two days and this afternoon when I turned it on I was still having issues. However, I went into the HP Support Assistant and it popped up that I had some updates to download and install, so I let it do its thing. It took a while because the Internet kept cutting out, but once the update for the Intel Wireless finally installed, my connection has STAYED CONNECTED. Finally!
I don't know why when I went into the wireless properties it said "device is working properly" and when I tried to Update the driver it said "your driver is the latest version" or whatever.
I suggest you go to the HP Support Assistant and check for updates in the "Updates and Tune-Ups" section. It was kind of random, but knock on wood my Wireless connection issue looks to be gone.
Hope this helps
P.S.
Here's a screen shot of what the HP Support Assistant (it is the one with the big question mark logo) main screen looks like :

Issue with MSSQL server connectivity from ODI 10.1.3

Hi,
In one of the interface we are populating data to target table in MSSQL server version 2005.
The physical topology connection results successful.
Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.d.a(d.java)
     at com.sunopsis.graphical.component.b.h.e(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.a(h.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.bp.bN(bp.java)
     at com.sunopsis.graphical.frame.bp.bL(bp.java)
     at com.sunopsis.graphical.frame.a.is.bH(is.java)
     at com.sunopsis.graphical.frame.bo.r(bo.java)
     at com.sunopsis.graphical.frame.bo.bv(bo.java)
     at com.sunopsis.graphical.frame.bo.z(bo.java)
     at com.sunopsis.graphical.frame.bo.b(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I have verified below:
The SQL server version is: MSSQL server 2005
the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
Java version: jdk1.5.0
There is no change in source or target db. Please help me to fix this issue

Hi,
Thanks for the reply. The link is helpful and its the same what is there in the environment.
"The JDK version is 1.5 and JRE version is 1.4.2."
But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
Thanks,

Labview 2012 Installer builder issues with Windows 7 64 bit

I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this??
Attachments:
BuildErrors.txt ‏11 KB

It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Issue with web part connections : won't display data when the lookup field is a calculated field

Hello,
I have a list A with a calculated field named A.A. I have a list B that has a lookup field to list A, to field A.A, named B.A. I add the two lists in a wiki page and I try to connect them - I.E., select a row from A and the rows from B would be automatically
filtered.
The B\Connections\get filtered values from A and select Provider:A.A, Consumer B.A doesn't bring any results. If I do the exact opposite: A\Connections\get filtered values from B and select Provider:B.A, Consumer A.A works fine. But, this is not what
I want.
If the A.A isn't calculated field, everything works fine. So, it looks like there's an issue with calculated fields acting as consumers.
Is this a known issue and are there any know workarounds? A workaround is to abandon calculated field and use sharepoint designer workflow.
Thank you
Christos

Hi,
According to your post, my understanding is that you had issues about connecting web parts.
I try to reproduce the issue, however, everything works well.
Create a custom list named List A, add a caculated column named A.A(Formula: =Title).
Create a custom list named List B, add a lookup column named B.A(List A: A.A).
Create a page and then insert the two list view web parts.
Edit page, select List B->Connections->Get Filtered Values From List A.
Then I can filter the List B.
I recommend to create another caculated column and get filter value form it to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Issue with SQL Developer connecting to databases

Hi all,
I would be really grateful if anyone could advise me on the below issue.
I have 64bit laptop running Windows 7 and I get the following error message when I try to connect via SQL Developer to an external database for work purposes:
Status: Test Failed: C:\app\Terra-PC\product\product\11.2.0\dbhome_1\BIN\ocijdbc.dll: Can't load AMD64-bit .dll on a IA 32 -bit platform.
Thanks for your help.
Luke

Hi,
Actually, I resolved this issue with the help of a colleague. SQL Dev was not able to see my TNSnames file, because the Oracle_Home path was not defined. Something like that, anyway.
Thanks,
Luke

Will I have Issues with Screen if Connected to PC for long periods?

I picked up a new 80g ipod to replace my old 20g gen 2, and I want to use it at work to play music through my computer. I am concerned about the Do Not Disconnect message with the flashing icon being displayed for 10 hours at a time every day. Am I going to get any characters or images burned on the display? I didn't think LCD's were subject to burning, but seems that some folks out there have had some issues.
Many thanks,
Ken

Geddy1961 wrote:
yes you will have issues with infinity.theyll tell you a speed you will get,which you wont,plus they will never give you a straight answer,your best going with another provider.look through this forum nothing but complaints
you said you get this speed here http://community.bt.com/t5/BT-Infinity/bt-infinity-superslow-broadband/m-p/614636/highlight/true#M59...
hi.here are my results from the test
download - 71.90mbps
upload - 12.07mbps
ping latency (ms) - 42.38

Issue with SQL Developer connect to SQL server

I'm using "SQL Developer 2.1.1.64.45" to work on a migration project which needs to convert a SQL server database to a Oracle 11g database. But I got an issue when I setup the SQL server connection. The SQL Developer let me connect by selecting a SQL server database name (For example: Northwind), but once connected, it always connected to "master" database instead. The "SQL Developer" is running on Windows 7 Professional (x64) platform. My Oracle database is 11g, and SQL server database is SQL 2005. And my SQL server instance name is "SQL2005". Anyone have ever experienced this problem? Thanks in advance.
Edited by: user8276338 on Feb 8, 2011 1:05 PM

Hi Bob,
Thanks for the feedback, lets stick with SQL Developer 3.
Correct me if I'm wrong,
You attempted to migrate from SQL Server to Oracle including target generation and datamove in one go, by filling in each step of the migration wizard to the end.
During the datamove you got
ORA-01000:maximum open cursor exceeded
So it looks like SQL Developer during the migration is not closing cursors fast enough and hits the maximum number of open cursors in your Oracle database.
I think the default max open cursors is 300 in Oracle.
There are a few things we can do here.
You should be able to see the new migration project in your Migration Projects navigator.
By navigating down the project tree to "Converted Database Objects" we can attempt the data move again by right clicking and choosing "Data Move".
But first I would restart SQL Developer so as to free up any lingering open cursors.
That may allow you to complete the data move, as the only cursors being open are being used in the data move and not some cursors which may have been left open from previous steps in the migration.
Now from my perspective I would like to identify where are we leaving open the cursors, so I'm going to setup some testcases my end to see if I can replicate.
From your perspective Id presume you just want to move on with the migration.
So if the above (shutdown and attempt just the data move) doesnt workyou could
A) Increase the MAX OPEN CURSORs on your Oracle databases so it complete the data move
or
B) Use the offline data move technique.
A) Increase MAX OPEN CURSORs
This wiki explains how to do that, looks like 1000 is fairly common, but even a much larger number is not a problem
http://wiki.oracle.com/page/OPEN_CURSORS
ALTER SYSTEM SET OPEN_CURSORS = 10000;
OR
B) Offline Data Move
If you are moving large amounts of data (say > 1GB), then the standard data move (we call it online), which just uses JDBC to SELECT * FROM and INSERT INTO may not cut the mustard.
In this case you can try using our offline technique. SQL Developer will generate a set of scripts for you.
unload_script.bat will use SQL Servers BCP tool to dump out the table data into DAT files.
oracle_ctl.bat will load the data in the DAT files into Oracle.
As we know the names of all the tables, columns ,both SQL Server and Oracle, we can generate fairly good scripts.
The benefit of this technique is large amounts of data can be migrated and you get to use tools designed to dump data and load in data, so you have better error logging and tweaking.
To attempt this in the Migration Wizard , Data Move page, select offline.
If you can describe your database a bit (number of tables, number of procedures, amount of data to migrate) I may be able to define my testcase better so I can replicate the issue.
Thanks
Dermot
SQL Developer Team.

Permissions Issue with Infopath Data Connection

I'm not really sure how else to title this....
Issue - InfoPath Form on SharePoint 2010 gives 'You do not have permissions to access a SharePoint list that contains data required for this form to function correctly."
It gives a correlation ID
Log file shows
"Exception Message: The form cannot run the specified query. The list could not be found."
Note the look-up is to a SharePoint list on the same content database.
We have two Web-Front End servers with a load balancer. We've had a number of other permissions type issues when the 'token' gets switched from one server to another, so we have the HOSTs file on each server pointing back to itself, so that once a
server is 'grabbed' it stays on the same one.
The error we are having currently, only seems to be occurring on the first Web Front End Server.
Also we have sharepoint setup with an address of
http://sharepoint.domain.com as well as an alias. http://sharepoint.
The error we are having currently, only occurs if I use the fully qualified domain
" http://sharepoint.domain.com" on the InfoPath data connection. If I use the shortened alias, the error does not occur. That is the current/easy solution, but I would like
to fix it 'correctly' if possible.
So, it appears to me that only on one of the Web Front End servers, it isn't liking the fully qualified path when doing a data connection.

Hi ,
Is the above issue fixed . if not please check below option
Check the List / Library [Source for dataconnection ] permission setting .
If the permission is unique [ restricted from root site]. we will the above type error message
Velu K

Issues with client looses connection with 6.0.196.0

Hi,
We recently upgraded our Wisms to version 6.0.196.0 and after the upgrade we have seen the clients sometimes looses connectivity and has problems to connect. We use an network with 802.1x and PeapMschapv2 with dynamic WEP.
We have disabled aggresive load-balancing but still see the issues.
Any ideas anyone?
Regards,
Martin

Hi,
Any news for these problems? Did the version 7.x fix these CAPWAP UP/DOWN problems with HREAP APs? It seems that I'm having these same problems now. Local APs seems to be fine, but HREAP APs goes UP/DOWN with versions 6.0.196.0 and 6.0.199.4.
There are three 4404 WLCs, where are different sites' office and warehouse APs connected to. The environment is configured as N + N + 1
like following:
WLC1 is for officeAPs. APs are 1131 and they're configured as H-REAP
WLC2 is for warehouseAPs. APs are 1242 and they're configured as Local
WLC3 is for backup and I used this for testing.
After I updated all the WLCs at summer to version 6.0.196.0, there have been issues where the clients looses randomly WLAN-connections. But the complaints just came from the two largest offices. And these didn't happend immeaditly after the update, but after few months. It can be that the summer holidays was reason for it. After some investigations, I updated the WLC3 for version 6.0.199.4, which just got released at the time, and moved these two largest offices' APs to there. Complaints stopped but after a month the second largest office informed that the clients' disconnections started to raise again and the WLAN-network has become unstable again. First there was just couple of issues but it have been raised as the time goes by.
When I made some more investigation to this site, I noticed that the APs' CAPWAP goes DOWN and UP randomly for a second:
*Nov 12 07:39:29.537: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN
*Nov 12 07:39:29.590: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Nov 12 07:39:29.590: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Nov 12 07:39:29.759: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Nov 12 07:39:29.811: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Nov 12 07:39:29.812: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Nov 12 07:39:29.849: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Nov 12 07:39:29.850: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Nov 12 07:39:29.889: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
Then I investigated some more and noticed that this happens on all of the H-REAP APs and almost in the same time:
*Nov 12 07:39:29.537: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC3, second largest site's AP (6.0.199.4)
*Nov 12 07:40:17.439: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC3, second largest site's other AP (6.0.199.4)
*Nov 12 07:41:20.297: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC3, largest site's AP (6.0.199.4)
*Nov 12 07:42:31.928: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC1, random site's AP (6.0.196.0)
When I checked the warehouseAPs, which are configured as local in the WLC2 (6.0.196.0), there was nothing like this in the logs. Logs are clean.
But when H-REAP is configured for these APs, the clients should not be disconnected when the CAPWAP goes down? And this whole "process" seems to last just for a second. Not sure if this is the real reason for these client disconnections, but at least this is not normal. I haven't heard complaints from smaller sites, even when APs at them also does the same.
I don't feel great to update the WLCs for the version 7.x, because it just seems to be new feature release, but if it fixes these, then I should think about it. Has someone, who had these same problems, got this fixed with version 7? Or has TAC provide some other patches for this?
Thanks,
Joni

First build issues with Thermaltake case connections

Similar Messages

Maybe you are looking for