First character typed in a safari 7.1 form not being recognised

Since I have updated safari to 7.1 on OS X 10.9.5 the first character in a form (such as a password) is not being recognised.  Up to now this has been working fine.  Does anyone else have this problem and does anyone know a fix?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Similar Messages

  • First character typed in a field disappears

    After having navigated into a field (alpha, date or number) either by a mouse click or by tabbing, the first character typed into the field disappears. No trigger is fired (checked with Tools->Preferences->Runtime tab->Debug messages chacked).
    If there is already some data in the field, I can reposition the caret, but the first character typed forces the caret to go to the beginning of the field and the character typed disappears.
    Behaves similarly in forms 6 and forms 9.
    Any ideas about the reason?
    Forms versions:
    V6
    Forms [32 Bit] Version 6.0.8.16.1 (Production)
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    JServer Release 9.2.0.1.0 - Production
    Oracle Toolkit Version 6.0.8.16.0 (Production)
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.15.0 Build #722 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 6.0.7.1.0 - Production
    Oracle Virtual Graphics System Version 6.0.5.37.0 (Production)
    Oracle Tools GUI Utilities Version 6.0.5.35.0 (Production)
    Oracle Multimedia Version 6.0.5.34.0 (Production)
    Oracle Tools Integration Version 6.0.8.16.0 (Production)
    Oracle Tools Common Area Version 6.0.5.32.1
    Oracle CORE Version 4.0.6.0.0 - Production
    V9
    Forms [32 bits] Version 9.0.2.7.0 (Production)
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    JServer Release 9.2.0.1.0 - Production
    Oracle Toolkit Version 9.0.4.0.23 (Production)
    PL/SQL Version 9.0.1.3.1 (Production)
    Oracle Procedure Builder V9.0.2.0.7 Build #1022 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 9.0.2.0.0 - Production
    Oracle Virtual Graphics System Version 9.0.1.5.0 (Production)
    Oracle Tools GUI Utilities Version 9.0.4.0.9 (Production)
    Oracle Multimedia Version 9.0.4.0.9 (Production)
    Intigration des outils Oracle Version 9.0.2.0.0 (Production)
    Oracle Tools Common Area Version 9.0.1.0.0
    Oracle CORE     9.0.1.2.0     Production

    Hi,
    I get this a lot too. It is, as you say when it has been left for a short while and you go to type and it misses the first letter. There was an update for a keyboard issue recently from Apple but it did not seem to cure this problem for me. It is completely intermittent though. Sometimes it's ok, like now, and others it is bad. Cheers.

  • First character typed not recognized

    Hi,
    I'm using a macBookpro with Tiger 10.4.11 from five months and I suddenly realized that the first
    character typed in different fields like 'Search' or other in general is often not recognized.
    Anyone can help in that ?
    bye
    Roberto

    There have been many, I mean a real lot, of posts on this subject. I used to have the issue myself. In your case it may be a MBP issue as stated here.
    Some more posts.
    The older threads I was involved in are archived now.
    My solution was this;
    First, try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    I unplugged all firewire and USB so there were no conflicts with their buses.
    Then I Repaired Permissions.
    Then I downloaded the 10.4.11 Intel combo update from this site, not Software Update. You can apply it right over what you have now with no issues.
    Repaired Permissions again (this procedure should be used with all updates).
    Then I ran the free Yasu to run scripts.
    I also did a repair with DiskWarrior, but you may not own that.
    This solved the issue for me.
    I would also register a complaint in Apples feed back area.
    Good Luck!
    DALE

  • Why is the first character typed delayed and showing up as the 3rd or 4th character?

    For about 2-3 weeks now, I've been running across this problem. It shows up all over the OS. I can be typing something into Spotlight or Safari and a lot of other apps and the first initial character typed doesn't show itself until the 3rd or 4th letter typed. It is really getting annoying.
    Does anyone have a fix for this?

    In the meantime, plug your USB cable into your computer. It may say "Not Charging", however, it will charge, but slowly.
     Cheers, Tom

  • First Character Typed Often Not Received

    Ever since upgrading, I've been noticing that many usernames and passwords that I type into character fields in Safari and elsewhere have been missing the first letter I type. I then have to add that first character or retype the string.
    Has anyone else noticed this? I'm not sure if it's something I'm doing wrong or not noticing, but it's definitely different. Maybe the field has been selected, but the cursor isn't there and ready for entry?

    So glad to hear many others are having this problem. I wasn't sure if I had a dirty laptop keyboard from leaving the lid up all the time. It might also be that I use TypeIt4Me which requires I have 'Enable Access for Assistive Devices' checked in the Universal Access system preferences. I think I tried disabling TypeIt4Me quite a while ago when I first noticed this issue but it didn't fix the problem. I've also rarely noticed that the first TWO characters get missed, but that's not anywhere near as common as missing the first one.
    This is a REALLY annoying problem...

  • Safari Version not being recognised

    Websites keep telling me I need to upgrade Safari to version 6 or higher.  I'm actually running v.7.0.4 (9537.76.4) on OSX 10.9.3. Even iCloud is telling me to upgrade and some sites - like soundcloud - refuse to let me past the warning page because it's detecting a version lower than v6.  I've reinstalled the OS and this hasn't helped.  It's been happening for some time but has recently become a problem as I'm now being actively blocked from sites. Any ideas?

    It's likely that the user agent is being altered by software or a hidden setting in your usual account. What did that page show ?.
    Have you tested with all Safari extensions disabled ?
    The following command in Terminal will remove a custom setting for the Safari user agent. Use it after quitting Safari.
    defaults delete -app Safari CustomUserAgent
    If you get an error message 'Defaults have not been changed' then it wasn't that, and there's some other reason

  • Safari 4 - Customize Toolbar not being remembered.

    Okay so I downloaded the new Safari 4, and as always found that I really don't like the default toolbar mainly cause the home button is never one of the default buttons among other ones.
    I do the old control click, and customize toolbar.
    I set it up exactly how I want.
    At some point I quit Safari, the next time I open Safari the toolbar reverts back to the default Safari toolbar, so every time I open up Safari I have to reset my tool bar, or just don't quit safari.
    There has to be something I'm missing here.. Anyone know what is wrong and why I have to keep doing this every time I open up Safari again?
    -Stuart

    Hi Stuart
    Welcome to Apple Discussions
    May be a corrupted preference file. Via the Finder: move the com.apple.safari.plist file to the desktop and restart Safari. You can find this file in your User Account>Library>Preferences folder. Restart Safari.
    This resets Safari preferences to default values. You'll need to reset any custom preferences settings, as well as any special settings in the Edit (spelling) or View menu (custom icons, status bar, etc.)
    Also, reset the toolbar to your liking. Quit/restart Safari.
    Post back

  • First character missing sometimes when i type

    it doesn't happen all the time but when i type something the first letter is missing iv'e noticed it mainly happening in safari
    any suggestions? thanks

    hmm, mine seems to be fixed
    history: ever since 10.4.3 the first character typed after an idle period doesn't register, tried combo updater, 10.4.4, blah blah, problem got more/less frequent but still hit several times a day
    three days ago by chance i ran disk utility and selected "verify disk", it said i had an "illegal name" and bailed, booting the tiger dvd and running disk utility could not fix it, nor could booting single user und using fsck
    some surfing turned up an issue linked to vietnamese characters in filenames that are installed as part of adobe creative suite 2 (and also in some standalone cs2 apps)
    this causes problems that once present can eventually result in serious damage to the disk structure, disk warrior was cited as being able to detect/fix the damage (apparently several other similar apps will not do it)
    two days ago i got dw, it showed several of the adobe-linked issues as well as a few other (imho minor) things, it fixed the disk
    since then the missing keystroke problem seems to be fixed too
    maybe this is just chance, maybe the zillion reboots did it, maybe starting single user did it, could be anything really
    so i decided to carry out the ultimate test and tempt fate by posting that mine seems ok now
    i'm not suggesting dw fixes the missing keystroke, but if you have any adobe cs2 apps it might be worth seeing if disk utility shows any issues when you choose the "verify disk" option

  • Delay when typing in Safari, the first character is always missing.

    Recently when I go to type in a address or text in the search window, the first first character is always gone. Resulting in me having to back space to the beginning to re-type the first character.
    My father is a Mac user too and he experiences the same thing.
    Any suggestions?

    Hi,
    The problem you described sounds reminiscent of a problem many MacBook, MacBook Pro and even PowerBook G4 users have been experiencing. If you do a Discussions-wide search for the phrase "first key" in quotation marks, you'll get an idea of how wide-spread the problem is. Apple recently released a firmware update for the MacBook and MacBook Pros, but reports of first-key-unrecognition persists.
    While I hope your problem isn't of this variety, the point I'm trying to illustrate is that if it is, Apple has yet to pin down a proper fix for it. Until they do though, perhaps some workarounds you can try are banging on a modifier key before typing anything, or clicking twice to ensure focus has been given to a window element and not just the window.
    Yang

  • I cannot open pdf files in safari.  It tells me first character is invalid.  I have deleted plug-ins and reinstalled program.  HELP

    cannot open PDF files in safari.  It tells me first character is invalid - I have deleted plug-ins and reinstalled the program.

    HI..
    If you are using Adobe Reader ...
    Try uninstalling the current copy of Adobe Reader first.
    Best to use a utility to do this to make sure all the associated files are removed as well >  Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
    Then reinstall >  http://get.adobe.com/reader/
    Quit then relaunch Safari to test.

  • Safari cannot open the page because the first character is invalid, how can I fix?

    I cannot open PDF's.  Error message appears saying, Safari cannot open the specified webpage because the first character is unrecognizable".  What do I need to do to fix it?

    Hi..
    Go to   /Library/Internet Plug-Ins
    Move the Adobe PDF browser plugin  (or PDF browser plugin) to the Trash.
    Quit then relaunch Safari.

  • Mac Book Keyboard Still Misses First Character When Typing....

    Hi all,
    This is an old problem that was supposed to be fixed with a software and firmware update but it still seems to happen on my MB. The first character I type generally does not register. Anyone else with this problem? I already had the keyboard replaced. Cheers.

    Hi,
    I don't use growl... so I can't say if it may be related to the problem. In my experience, I cannot relate the problem to anything, neither could people here. There used to be a huge thread on this problem, but it got deleted (maybe because the issue is considered solved).
    Another thing that makes it hard to isolate the cause is that it seems impossible to replicate a situation in which the keystrokes are missed. Sometimes I have the problem once or twice a month, then there are days when it happens all the time. I also think it was there from the beginning, but I'm not sure about that, since it took me some time getting used to the keyboard, and I may have attributed missed keystrokes to my lack of typing skills
    Support told me to install OSX again, and see if the problem is still there. I could not do it so far since I really need my MB for work right now, but I will try it and report back. I think if it doesn't vanish then, it can't be a software problem. Any opinions on this?

  • Friends,  i  have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google

    Friends, 
    i  have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google. I have attached a sample screenshot of the safari problem which i am facing. In this particular example i wanted to write Print Screen, however halfway,my typing automatically shifted to google bar?? can you guys help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

  • How can I stop when the first character I type into start page search matches my thunderbird password the whole password is revealed.

    Typing into the Mozilla start page my thunderbird/gmail password is revealed as a suggestion pop-up when the first character is typed.

    See:
    * http://kb.mozillazine.org/Deleting_autocomplete_entries

  • The first character I type often ends up at the end of the word.

    It's been going on since at least Snow Leopard, I'm on a clean Lion install now. It happens relentleslly in Safari. When I type in a search or fill a form on a webpage - even something simple as google, the first character I type often ends up at the end of the first word I type. Sometimes it ends up in the middle. If anyone esle has even observed it, i'd like to hear just to confirm I'm not mad.

    See:
    * http://kb.mozillazine.org/Deleting_autocomplete_entries

Maybe you are looking for