First Generation Ipod Nano gives error message when using Windows Vista
I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
Conclusion: Early Nanos work with XP, but do not function properly with Vista.
Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.
All of the following programs should work with Vista.
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
Similar Messages
-
How to get rid of error messages when booting Windows Vista on a Mac
I know there's a way, I've seen a page where there were step by step instructions on HOW TO do it. I just can't seem to find it now.
Hi and welcome to Discussions,
doing some guessing 'Unrecognized partition table for Drive 80' error ?
Have a look here for solution: http://www.lancelhoff.com/unrecognized-partition-table-for-drive-80/
Or use the BCD approach described in here: http://discussions.apple.com/thread.jspa?messageID=6265406
Hope it helps
Stefan -
A friend told me that if I give my first-generation iPod nano can renew it, that's true?
a friend told me that if I give my first-generation iPod nano can renew it, that's true?
please respond quicklyWhat are you talking about? You can't "renew" an iPod. You also cannot trade it in to Apple. Apple will recycle it for you and give you a 10% discount on the purchase price of a new one.
-
Hello! I have a first generation Ipod Nano!
Hello! I have a first generation Ipod Nano! Unfortunately he is not working as it used to, in this regard, I would like to clarify: Can I change it at the official Apple store, a new one? If so, how much will it cost? (no money to buy a new Ipod, and I would like to change to the new surcharge).
In advance, thank you!At an Apple Store they will give you 10% off the price of an new one if you recycle your old one.
But if you have a 1st Generation iPod you need to go this route: http://www.apple.com/support/ipodnano_replacement/ -
I have two iPods, one IPod touch from the fourth generation and another one that must be from the first generation iPod nano. Can I trade them both in?
The Fourth generation- 16GB
First generation-4GBApple does not have a "trade in" program for iPods, other than the recycling program that gives you a 10% discount on a new iPod (at an Apple Retail Store).
http://www.apple.com/recycling/ipod-cell-phone/
There are some third-party (non-Apple) companies that provide compensation for old iPods. You can also sell them yourself on eBay. -
Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"
Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip. It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted. PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client. Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone.
Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card. Don't think I have any plugins. I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that. Think I deleted it.
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program. I am using the non-CC version because I am 68 years old and only do seminars and documentation video. Don't need so many bells and whistles, and definitely don't need learning curves every few weeks. CS6.0.3 works fine for me. By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that. Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December.
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door. If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that. So far it just happens with clips in my video that have RGB color correction.
Rick -
Do all first generation ipod nano's prebuffer the next track?
do all first generation ipod nano's prebuffer the next track?
have they always? the first gen that is.
what i mean by prebuffer is does the firmware load the next track in memory as the current track is being played ?As far as I know, the flash memory used in the nano is one big buffer.
It doesn't work like hd based iPods where the songs are pre-loaded into a 32mb (or 64mb) buffer and played from there. -
Error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'.
I'm continually getting an error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'. The message being 'Table BAPIADTEL entry to be changed not found in target system'.
I have looked up this message but all links seem to refer to FM 'BAPI_BUPA_CENTRAL_CHANGE', which I'm not using, and has different parameter settings.
I'm simply trying to update the telephone number and I'm updating strcuture BAPIADTEL and BAPIADTELX but still the message appears. I know that there is a really simple reason for this, but I have been double-checking everything and experimenting with lots of different areas, but with no effect.
Has anyone encountered this problem using the specific FM ''BAPI_BUPA_ADDRESS_CHANGE' ?.
JasonHi Jason,
In case your database tables had already value for field telephone number, then only the flag should be "U".
If the telephone number field was empty, and we will try to change it by using the flag as U, it wont work. In this case, we should be using "I".
I even wrote that before in this post, but somehow I guess the post was locked, and a lot of comments from you and me were not visible apart from the first two. So, I couldnt get any update from you.
Anyway, its good that its working for you. Thank you for the update.
Regards,
Susanta -
ERROR MESSAGE WHEN USING PACK COMMAND Missing file ////presenter.css Command then fails
Also: "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." I have Java enabled in all browsers
Thoughts? Using Presenter 10 Win 8.1 Intel I7 new HP with plenty of memory
ThanksI had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O. -
Error message when using xrpcc in JWSDP 1_0_01
Dear all,
I've got the following error message when using xrpcc of JWSDP 1_0_01 for my config.xml file.
D:\jwsdp-1_0_01\Message>xrpcc -classpath build -both -d build config.xml
error: invalid element "{http://java.sun.com/jax-rpc-ri/xrpcc-config}configurati
on" in configuration file (line 2)
The content of 'config.xml' is shown as follows.
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/jax-rpc-ri/xrpcc-config">
<rmi name="MessageService"
targetNamespace="http://messageuri.com/wsdl"
typeNamespace="http://messageuri/types">
<service name="MyMessage" packageName="Message">
<interface name="Message.MessageIF"
servantName="Message.MessageImpl"/>
</service>
</rmi>
</configuration>
Thank you for your kind attention!
Regards,
EddieThanks all! I've already solved my previous problem, however, i got another one now.
=========================================================
error: unknown model info in configuration file (line 5)
=========================================================
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<rmi name="MessageService"
targetNamespace="http://messageuri.com/wsdl"
typeNamespace="http://messageuri.com/types">
<service name="MyMessage" packageName="Message">
<interface name="Message.MessageIF"
servantName="Message.MessageImpl" />
</service>
</rmi>
</configuration>
Thanks,
Eddie -
Error message when using search
why do i keep getting an error message when using the "search" tabe in iTunes. This happend whe i upgraded t the latest version of itunes.
Well, I believe JHeadstart does not really have this functionality.
One way is use a Query Operator 'startsWith', but then you always query like LIKE '<entered search value>%'
This is probably not what you want...
But you could hack it into advancedSearch in YourApplicationModuleImpl
try {
if (viewCriterium.getQueryValue() != null) { //This is where exception JHS-00116 is raised...
value = viewCriterium.getQueryValue().toString();
} else {
value = null;
catch (NumberFormatException ex) {
//insert check for wildcard
value = viewCriterium.getValue().toString();
if (value.indexOf('%')>=0) {
sLog.debug("Ja, een wildcard!!!");
operator = "LIKE";
} else {//original exceptionhandling code here...
...and a bit later, add test for "LIKE":
if (viewCriterium.isDate() || viewCriterium.isString() || "LIKE".equals(operator)) {
value = "'" + value + "'";
very nasty code, and does not raise an exception for searches like '%xxx'
Good luck,
HJH
Edited by: HJHorst on Mar 5, 2009 12:03 AM -
Error Message-When using DataScroller
Hi
I get the following error message when using DataScroller. I am using Oracle Jdeveloper 9i production release.
Application Error
Return
Error Message: null
java.lang.NullPointerException
int oracle.jbo.server.ViewRowSetIteratorImpl.scrollRange(int)
int oracle.jbo.server.ViewRowSetImpl.scrollRange(int)
int oracle.jbo.server.ViewObjectImpl.scrollRange(int)
int oracle.jbo.html.jsp.datatags.RowsetNavigateTag.doStartTag()
void DataHandlerComponent.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.GetParametersRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.EvermindPageContext.include(java.lang.String)
int oracle.jbo.html.jsp.datatags.ComponentTag.doStartTag()
void Rate.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.GetParametersRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.EvermindPageContext.include(java.lang.String)
void BrowseTab.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
void com.evermind.util.ThreadPoolThread.run()Issue has been resolved .Ingnore this
-
Adobe Air error message when using PSE 10
When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7
Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070. This is the install log.
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
Native installation package creation succeeded
Starting silent combined runtime update and app install.
Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Unpackaging complete
Download success
Runtime updated downloaded
User has selected immediate install of the update
Starting runtime background update installation
Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
Runtime updater successfully launched
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -update
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_704_0 -ei
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Clearing unused background update directory
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Runtime Installer end with exit code 6
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4784_0 -ei
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_3840_0 -eu
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_764_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_5396_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
Received download status 200
Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download success
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
Native installation package creation succeeded
Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Relaunching with elevation
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
Application Installer end with exit code 0
Date: Thu, 12 Apr 2012 17:10:46 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air error message when using PSE 10
Re: Adobe Air error message when using PSE 10
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties. Please feel free to respond to this thread if you have any questions about the steps listed within the document. If you could also respond with the specific error message you receive it would be appreciated.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Licence error message when using automation software
Error message when using Rational Functional Tester 7.0.1.1
to record a Flex application. The message seemed to come from the
Flex application.
I can record a fiew step in the application, then I have the
message : "Licence are not present. Eith the trial version only
limited record are allowed". But, my license of my Rational
Functional Tester application is activated.
I am using a Flex builder 3 trial version and the trial is
not over.
Is there any problem to get the license in the File compiler
with "D:\apps\IBM\SDP70\FunctionalTester\bin\rft.swc"? That RFT
file is supposed to be included in the flex application once
compileDoes anyone know how to build with automation support in a
linux environment?
We simply run an ant script build and have the SDK installed.
We purchased Flex Builder Professional, but cannot install on Linux
(we don't want to use the alpha version).
Thanks for any pointers :) -
Dreamweaver CC generates one of 3 error messages when using find and replace is used more than twice in succession. "While executing onLoad in bc_afterSave.htm, the following JavaScript error(s) occurred: At line 188 of file C:\Program Files (x86)\Adobe|Adobe DreamweaverCC|Configuration|Shared|BC\JS\bc_sites.js": out of memory"
or
While executing runCommand in File_Save.htm, a JavaScript erroroccurred.
or
While exciting getDynamicContent inAdressURL.htm, a Javascript erroroccirred.
Any thoughts - I end up closing DWCC and reopening. Will work for two additional Find and Replace before the error messaged\s popup again.bkaufman43 wrote:
Thanks Jon. I tried all of those solutions before posting. Same problem. It seems that the problem is tied to DWCC. Do not have the problem when using DW6 on Win8.1. When running DWCC on a Win7 pc, we get the same error message. When running DW6 on Win 7, f&c works fine. It seems to be a bug in DWCC. DWCC works flawlessly on our Macs.
The same steps apply to DWCC, you just need to choose the CC folders rather than the DWCS4-6 versions that the page talks about. The layout of CC's folders hasn't changed from the older versions which is why, I think, Adobe hasn't updated the troubleshooting page as of yet.
As Nancy mentions, a 38,500 page site is sort of ridiculously large for a static website, that could be part of the problem, but your response quoted above leads me to think you may have tried the troubleshooting steps in the wrong version of the program. Could you confirm that?
Maybe you are looking for
-
How to add LOGO to the print version of a webreport
Hi experts..can anyone tell me the detail steps for the below query? Q)how we can add a logo to the print version of a web report. The report is displayed in pdf and the logo should come on every page of the pdf.
-
I am connected to wifi but it says i'm not connected?????
I can't connect to wifi even though i put in the network and password and looks like it should be connected but it says not connected.......works on my coworkers with android but my co workers who have iphone we are all having the same issue
-
Mail: no saving of multiple attachments
Ups, this must be a bug: I cannot save multiple attachements all at once in Mail like it was before. I click on the attachment symbol in a single mail and then "Save All" - saves only one attachment. I click in the Menu on "Ablage" (is it file in Eng
-
Message when trying to download an app
I've been trying to download text plus on my Alcatel one touch fierce phone in play store. But when I do I get an error message...your content filtering level does not allow you to download this item. How do I change the content filtering level?
-
How to transport SAPUI5 components from ABAP repo
Hi All, Please suggest me how can I move the SAPUI5(deployed in ABAP repo) apps from Dev system to QA . Thanks in advance Rajesh