First imovie, now iDVD.

I have had my 2.4ghz Macbook Pro for three weeks now after converting from PC's.
My first problem was with imovie 7 which i still never solved after i decided to use movie6 HD instead.
Today i went to open iDVD and the icon in the dock bounced once and froze without opening the programme. I have used this programme before successfully and burnt a DVD but now it fails.
I have reinstalled the system from the factory discs twice today and it still doesnt work!
Apple is Pants.

Welcome to the Apple Discussions. Log into another account on your Mac or boot into Safe Mode and see if iDVD will launch. If it does then there's something amiss with your account.

Similar Messages

0 For 3 In Making My First iMovie With iDVD (help!!)

Hello all,
I have just made my first attempt at making a DVD (via iMovie & iDVD). Firstly, this took a while, because the content (our honeymoon) was made w/ a mini-DVD camcorder (we've since exchanged for a Mini-DV camcorder), and I had to upload the movie to my Mac (miniDVD-->miniDV tap-->imported to Mac via iMovie {as one long clip which I segmented by hand later). Not sure if this was the best way of converting, but everything appeared to be going alright. Until....
Yesterday, I made my first attempts at taking my iMovie Project to iDVD to burn a DVD. Now everything looked ok. I played the movie in iMovie (everything good), and I set up everything in iDVD (and everything looked good). Unfortunately, the point where I have issues begin when I start to BURN a DVD.
Info on movie: it's about 59min; some music from my iTunes library; 4.0 Themes.
Attempt #1
After about 2.5hrs, I checked status, and iDVD was in a spinning ball state. This was during the "encoding audio" portion of process. Activity Monitor said iDVD & encoding server were "not responding". iDVD eventually QUIT.
Attempt #2
I then "deleted encoded assets" (found this suggestion from this forum), and made another attempt. This time I checked iDVD more frequently and watched specifically around the point when "encoding audio" began. This time iDVD made it through this process. And after an overall time of ~3hrs, my DVD popped out!!
I plopped it in my separate dvd player (and later MBP DVD Player app), and I got this frustrating result: audio for the menus (4.0 Fish theme), but no audio for ANY movie content! ugh!
Attempt #3
Once again after finding suggestions in this forum, I went about Saving As Disk Image via iDVD, and then went to bed. I woke up this morning to see that overnight, iDVD had "unexpectedly quit".
I'm at my witt's end here. I've read many forum threads w/ similar symptoms, but haven't found anything conclusive. There are a few things I may try:
o Import miniDVD directly to Mac via camcorder (no tape transfer)
o Not use any iTunes music in project
o Try a more "basic" them (not use movie clips)
In case you were wondering Disk Space shouldn't be an issue. The iMovie Project took up about ~20GB, and I still have about 70GB left out of the "spec-ed" 120GB (this is on a MacBook Pro w/ 2GB of RAM).
As you may guess, I'm a total iMovie/iDVD novice. I tried all the obvious things for making this movie and it didn't work. It seems I need a "work-around" here to make this movie. I thought this was "supposed" to be easy!
Please help!!
MacBook Pro (2.33GHz) Mac OS X (10.4.8) 120GB Hard Drive

Hey Sue Thanks for the quick response!!
Yeah, with regards to the DVD camera, that was a wedding gift out of my control (I had a nice miniDV on our registry, too!). oh well!
Is it really encoding audio from a DVD even though I saved the DVD movie onto a miniDV tape & then handled it that way on my Mac?
As for all my music media, they were all from my iTunes library and were AAC files. I had one of them which was "protected" (i.e. an itunes purchase). I just now removed it.
As for the DVD Media, I'm using TDK DVD-R. (should mention I actually have made another movie. However this was with video from someone's camcorder (i.e. really grainy). I just wanted to give it a try. I made this w/ a TDK DVD-R. However this is my first "real" movie.
Ok so, I'm giving it a 4th try. This time I'll:
o Remove the Protected iTunes song from iMovie & Save Project
o Trash the preference files from iDVD
o Run "Repair Disk Permission" via Disk Utility
o Save iMovie Project
o Share iMovie Project to iDVD & then give it another try!
Wish me luck! (& Thanks for the help!)

This is my first time using iphoto, I am trying to make a slide show that I can then burn to a dvd. The slide show is complete, but I'm not sure where to go now. Can I burn the slide show from iphoto or do I have to export to imovie or idvd?

I have completed the slide show i am making, but not sure what to do now. I want to burn it to a dvd, but not sure if i can do that from iphoto or do i need to export to imovie or idvd? If i need to export, will iphoto save a copy in iphoto? This may be really stupid, but I don't see an obvious way to save my slide show in iphoto. Please Help!

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
NOTE: If you're running iPhoto 9.5 the export options will be different.
OT

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I burn my DVD with Toast 11?

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I still burn my DVD with Toast 11?

no need for Toast ..
tell iDVD to create a disk-image
transfer dmg to othe Mac
launch the Disk Utility, burn that dmg .......

Updated to iLife '08 and now iMovie and iDVD won't Start

I received a copy of iLife '08 for Christmas and finally got around to upgrading today. The new iPhoto works just fine but when I try to start iMovie, it crashes (I have included part of the Problem Report below). I have tried restarting and it doesn't help. Then I tried to start iDVD and it flashes the "Welcome" / "Open" screen and then quits before I can do anything -- no error report. Any ideas on how to:
1) Fix both programs so they will launch -OR-
2) Restore the old versions of iMovie and iDVD
Thanks!
Process: iMovie [345]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovie7
Version: 7.0 (471)
Build Info: iMovieApp-4710000~2
Code Type: X86 (Native)
Parent Process: launchd [104]
Date/Time: 2008-01-02 15:53:31.019 -0500
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Creating more than one Application'

Run Software Update (under the Apple menu) and update that software.

I can not see Aperture in the media brower of iMovie and idvd since I have upgraded my iphone 5

I have Aperture 3.4.2 (most updated version I could find). Now when I look to make a movie or dvd with my photos. I can not find any of my recent photos in imovie or idvd via their respective media browsers. Aperture and iphoto are both working fine and great (ie: I can adjust my photos accordingly and print them out). I was able to successfully make both an imovie and then burn it on idvd (added photos to the idvd screens via media browers too), last week.
The only thing I can think that is different with my computer is that I upgraded my iphone from iphone4 to iphone5.
This is what I have looked into already:
Aperture>Preferences>Preview is set to share and set to always>photo preview set to Don't limit (no change)
Tried alt+cmd when opening Aperture and reset Aperture (as well with iphoto). (no change)
Itunes>Advanced>choose photos to share> then a window pops up stating Aperture could not be found open Preferences in Aperture (My first step already proved that it should be fine)
My question is why all of a sudden is Aperture and most of my iphone photos not showing up in imovie or idvd all of a sudden? Does the recent Iphone5 updgrade have anything to do with it?
Any help would be great since I have been looking all over the web for an answer with no success.
Thanks in advance for your help.
TOM

Did you try this link: -> Images or Animations do not load
* http://kb.mozillazine.org/Images_or_animations_do_not_load
If NO, then check it first. If YES then bummer !! I was hoping that would work :-( Anyway here's how you can Downgrade to a previous version.
Uninstalling Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT THE OPTION TO REMOVE YOUR USER DATA AND SETTINGS
Downloading Firefox 3.6.19
* http://www.mozilla.com/en-US/firefox/all-older.html
Installing Firefox on Windows
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

IMovie and iDVD, Stupid Upgrade Questions, Sorry Must Ask

Okay, the deal is I have a PowerMac G4 Version 2.1 with a Combo Drive. I am upgrading to Mac OSX 3.0 so I can do certain things in iMovie and acquire a better browser. (My constraints on the iMovie project about which I've been inquiring are that at least 40 people have been waiting for copies of it for about a month and wondering why I don't come through with it--I sent a lengthy explanation to the guy who'll be duplicating it in case anyone asks. That's one reason I'm in such a hurry I have to ask urgent questions at forums and newsgroups and don't take the time to read every word ever written on every one of these systems and their various applications, abilities, and uses.)
I started out thinking I was about one step from having a completed project and the more I learn, the more grim the situation looks. Yet I've done ALL THIS WORK already to create beautiful titles and elaborately-edited outtakes. I HATE to ditch it all if any faint hope flickers into sight!
My Mac came with the following:
iMovie 3.0.3 -- which seems to be working fine, only problem is, due to deficiencies in other equipment, I'm having trouble getting my movie to DVD or into any other form where it can be played anywhere outside the Mac!
iDVD 2.1 -- My feeble brain, inadequate as it may be, has so far gathered the information that to go to DVD, a project can't be played in iMovie and sent straight to a DVD burner (can it?) There has to be some intermediary step. (Right?) People have argued the various merits of iDVD vs. Toast to accomplish this step. I hadn't opened my copy of iDVD because I am in no way near the point of being ready to make a DVD--I have not yet finished editing the project in iMovie. I made the hideous error of ASSUMING that since this came installed in my Mac, it would work fine when needed, just as iMovie did. When I tried to open it just to see what version I had, it wouldn't open and told me this:
System Requirements
iDVD 2 requires a PowerMac G4 computer with 256 Megs of RAM, a built-in DVD-R Superdrive and Mac OS 10.1.3 or later.
Stupid redundant bonus question #1: WHY would this come installed on a Mac which lacks the hardware to use it? (iMovie could still be used to edit, and then copy projects--if I had a digital video camera--which I don't. The only other way we've figured is to send it back through the Canopus ADVC110 converter I used to get the video in there, and play it out to a VCR--a cumbersome process I've been assured will result in crummy quality.)
Okay, here are the REAL questions:
1. I don't suppose there's any way the Canopus could be connected to the DVD burner and the information sent to a DVD that way? Just asking.
2. Obviously the upgrade isn't going to fix things to make iDVD work, as I'm already using Mac OSX 10.2.8, so I would assume its discontent stems from not having the Superdrive--at least, it was complaining something about inadequate hardware and I think that's what it meant. Will connecting a DVD burner via FireWire convince iDVD to work (either automatically or after some sort of tweaking), or am I stuck replacing the drive? I bought a DVD burner the minute I realized my drive was a Combo Drive and not a Superdrive (which is the first time I stuck a blank DVD in it and nothing happened) before learning details about this intermediary step and that there is more than one way to accomplish it.
3. Is it even worth replacing the Combo Drive with a Superdrive or is it more worth buying a whole new Mac? If I am FORCED to buy a new Mac, what should I do with the old one? (Not only am I ethically opposed to tossing a perfectly good piece of electronic equipment into the ravine, I might get fined for littering. Can a good home be found for it? For that matter it would be a pain as I've saved all sorts of stuff to the Hard Drive which would have to be transferred to the new one before I could get rid of the old one. So can I keep the old one...PLEASE?)
4. After making the system upgrade, will I be able to bypass iDVD entirely by using Toast, or does Toast also have all sorts of requirements my hardware does not possess so I'll still be SOL, stuck replacing drives or even the whole Mac, or going directly to crummy-quality VHS as there is NO OTHER WAY OUT?
5. After making the system upgrade, would I be ready for more advanced versions of iMovie and iDVD? Are any upgrades free, or does every improvement cost? Do I get them all at the Apple site, order some of them from some supplier or other the way I did with the Mac OSX upgrade, or what?
Thanks for helping to clear up my massive confusion!!!

Wow, thanks. It's good to know iDVD is still an option, even if I don't buy the Superdrive (is that even possible, to get the Combo Drive taken out of my current Mac and a Superdrive put in? There's a question still unanswered.)
(I think this is good to know--because part of my reasoning in asking the question was to eliminate one option or the other, and now I'm ending up with options of options, but hold on for Part 2 as I do have some questions concerning the capabilities of iDVD and Toast.)
Partly answering one of my own questions (although I'd appreciate confirmation from someone who actually knows,) if these Toast 7 requirements mean what I think they do, I don't see anywhere that it says the computer MUST have a Superdrive and CAN'T use an external DVD burner!
Toast 7 Titanium
Requirements:
* PowerPC G4 processor or faster (G5 recommended for viewing DivX files on your Mac)
* PowerPC G3 processor and Mac OS 10.2 users, see Toast 6 Titanium or Popcorn
* Mac OS X v10.3.9 or later
* 300 MB of free disk space to install
* Up to 15 GB of temporary free disk space during usage
* QuickTime 7 or later
* CD or DVD burner and recordable media
If this is true (that I can use an external DVD burner) I like Toast already! My Quicktime Player is only version 6.5.2--is it going to be difficult, expensive, or both, to upgrade that? If it is or the other System Requirements are not met I can just go with Toast 6.
As far as those requirements, I promise you I don't understand a word of it but here is what my System Profiler says my Mac has. Maybe someone can make sense of it and help me decide which version of Toast to get or, if not, what to do:
System Profile
Software Overview:
| |
| System version : Mac OS X 10.2.8 (6R73)
(As I said, I'm upgrading to 10.3.0 soon, and obviously if I want Toast 7 gotta figure out the best way to go to 10.3.9 or higher.)
| Boot volume : Hard Drive |
| Kernel version : Darwin Kernel Version 6.8: Wed Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC |
Hardware Overview:
| |
| Machine speed : 867 MHz |
| Bus speed : 133 MHz |
| Number of processors : 2 |
| L2 cache size : 256K (times 2) |
| L3 cache size : 1MB (times 2) |
| Machine model : Power Mac G4 (version = 2.1) |
| Boot ROM info : 4.4.6f2
Memory Overview:
Location Type Size
DIMM0/J21 DDR SDRAM 256 MB
DIMM1/J22 DDR SDRAM 512 MB
DIMM2/J23 empty
DIMM3/J20 empty
Network Overview:
Built-in:
| |
| Flags : 0x8051<Up,PpoinToPoint,Running,Multicast> |
| Ethernet address : 00.00.00.00.00.00 |
| IP : 67.0.142.95--> 67.0.128.6 |
| Subnet Mask : 255.0.0.0 |
| |
Devices and Volumes
PCI:
SLOT-1(AGP):
| |
| Card Type : NVDA,GeForce4MX |
| Card Name : NVDA,Parent |
| Card Model : GeForce4 MX |
| Vendor ID : 10de |
| Device ID : 172 |
| ROM# : 1121 |
| Revision : a5 |
| |
USB Information:
USB Bus 0:
Apple internal modem:
| |
| Product ID : 33282 ($8202) |
| Vendor : HCF USB V.90 Data/Fax Modem |
| Device Speed : Full |
| Power (mA) : 500
FireWire Information:
No FireWire devices found.:
(Unsure why it says this as the Canopus Converter is a FireWire device and it's connected, turned on, and has been working.)
Bus:
CD-RW/DVD-ROM:
| |
| Disc Burning : Fully supported.
(Obviously this means CDs only, not DVDs.)
Hard Drive:
| |
| Disk Size : 57.26 GB (1K = 1024) 62 GB (1K = 1000) |
| Unit Number : 0 |
| ATA Device Type : ata |
| Device Serial : VNC303A3L6AAHA |
| Device Revision : VA3BA52A |
| Device Model : IBM-IC35L060AVVA07-0 |
| |
Hard Drive:
| |
| Volume Size : 57.26 GB (1K = 1024) 62 GB (1K = 1000) |
| Ejectable : No |
| Writable : Yes
One thing which may really sway me in favor of Toast is, will it make possible burning 2-hour DVDs? Supposedly iDVD will not enable anything longer than 90 minutes, and when I get to the other big project for which I really want to use the Canopus ADVC 110 converter, that is, converting my home movies from either VHS or 8mm video camera tape to DVD--well, ALL of my tapes are two hours long, because that's the way they come!! I don't see being limited to making 90-minute DVDs as anything but another GIANT PAIN of which I'm already amply supplied! So if Toast will fix this dilemma I'm ALL FOR IT!
As always, thanks for help and advice.

Are there glitches in iMovie or iDVD that would create problems with viewing a finished project on a standard dvd player?

Everytime I render a new project in iMovie and share it with iDVD to produce a video, there always seems to be glitches in the finished project. I have gone back and tried to recreate the slideshow, but have not had a whole lot of luck. I am wondering if I need to delete the iMovie and iDVD applications from the computer??? If I do that will it fix my problem or will I even be able to redownload the programs without having to pay for them again? I have spent more time and $$$ trying to get a viewable disc to burn and am ready to get rid of the computer altogether. Hopefully that will not have to happen, but this is a constant issue that I go through everytime I work on a project. Any suggestions???

Hi
Yes and No.
There are Bugs and ways to make better or Worse DVDs - see if this can help.
There are two "Bugs" (or at least one)
• In iDVD - do not go back to video editing program - if You got Chapters set in Your movie - if You try - then now back in iDVD it will ask You to up-date ==> all Chapters will point to Chapter one. Medicine - create a brand new iDVD Project.
• There MUST NOT BE any Chapter mark set in very beginning of the Movie - or in any transition or within 2 seconds from them.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser ( AND AS MEDIUM - not HD etc as DVD then will suffer in quality ) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

IPhoto Slideshows: major loss of quality when passed to iMovie or iDVD

Problem: Slideshows created in iPhoto and exported to a Quicktime movie lose quality when exported from iMovie or iDVD.
I've read through many threads in both the iMovie and iDVD forums, and I've done a lot of testing to find the source of my frustration. Now I want to spell out my findings and see how they compare with what others know of this process. I'm posting the thread in this forum because iPhoto seems to be the common denominator.
I create slideshows in iPhoto, adding Ken Burns effects to each photo individually. I then export the slideshow as a Large (640x480) movie. The resulting movie looks good when played in Quicktime.
I import the Quicktime movie into iMovie, add some music and themes and then export it. No matter how I export it, the quality greatly suffers.
I try bypassing iMovie and import the iPhoto-created movie directly to iDVD. I burn the project and the quality of the video suffers.
As a final test, I create a similar slideshow in Photo to Movie, using pan and zoom effects and music, just like the iMovie project. I export the slideshow to a Quicktime movie and it looks great. I send that movie to iDVD and burn the project -- the quality is much better.
All this testing tells me that iPhoto's exporting of the slideshow creates some problem when running the movie through iMovie or iDVD. At first I thought it was just the conversion of the video to Quicktime movie and then it being encoded again by iDVD. The thing is that Photo to Movie also creates a Quicktime movie and the result after iDVD is still good. I don't have a real technical explanation for what's going on, but surely somebody does!
Sorry for the length of this post, but I needed to lay out all of my findings to try and get a good discussion going. Anyone have some insight into all this?
PowerMac G5 1.8 GHz Mac OS X (10.4.6)

Running into the same problems with video books. I created some video books (using iPhoto's book feature and exporting to iDVD) and the Quicktime files don't look good.
However, I have created some slideshows prior and didn't run into any quality issues. I used the Share - Send to iDVD, but that shouldn't change anything.
If you hear how to resolve video quality issues, I'd love to know. I haven't yet burned my video books to DVD (just exported to QT), but I'm hoping on the TV from 10+ feet away it will look fine.

VH to iMovie to iDVD?

Hello,
I will put this as simply as I can..
1: I have is a recording from satellite which I put onto DVD.
2: I have then opened/added the disk within VisualHub and and chose the DV option.
3: Then I opened it within iMovie to edit it and then the finished project is then shared to iDVD.
4: Within iDVD I then create the add a theme etc and then choose burn to disc which actually works fine.
5: Playback on the dvd player is fine but the picture is very grainey and looks like a VHS type of recording. Is the big loss of quality to do with extracting via VH and passing it from iMovie to iDVD?
6: The original was recorded from some of my sky+ recordings and is pin sharp.
Any ideas?
Cheers
Oh one other question is how would I transfer the video from iDVD to USB for playback on my DVD?
Message was edited by: macbookair

+can I still download iMovie 06 and is the 09 part of iDVD ok to import the finished movie?+
You can no longer download iMovie6 from Apple, but you might be able to get it elsewhere, buying iLife 6 on ebay or something. You can try here: http://www.macrumors.com/2009/01/27/imovie-hd-6-no-longer-available-for-download /
Yes, iDVD versions 8/9 (the same thing, different numbers) works great with iMovie 6.
If you do extract the footage, you have to expect a quality loss. If you don't have iM6, you can still do it for iM9, You might try it this way, recommended by AppleMan, who is pretty knowledgeable about iMovie 9:
+I have found I get the best results when I use MPEG Streamclip (which is free). You also have to install the Apple QuickTime MPEG2 Playback Component which costs about $20. Once you install the QuickTime MPEG2 Playback Component, you don't have to interact with it, but MPEG Streamclip needs it.+
+Insert your DVD in your drive. If DVD player runs automatically, shut it down. You should see your DVD as an icon on the desktop. Open it is a finder winder. You should see a folder which has VOB files.+
+Open MPEG Streamclip and drag these VOB files into Streamclip. If it offers to fix timecode breaks, say yes. You can do the VOB files one by one if you want to deal with shorter clips. Or, you can drag all the VOB files at once and create one long clip, or use streamclip to separate them into smaller clips.+
+In Streamclip, select File/Export using Quicktime and choose Apple Intermediate Codec. You may want to check "Deinterlace" in this step. Try deinterlacing and see if you like it. It depends on your final target media as to whether this will help.+
+Now you should have MOV files in Apple Intermediate Codec which can be imported into iMovie.+
+If you want, you can create a folder under iMovie Events and export these clips from MPEG Streamclip directly to that folder. The next time you open iMovie, it will generate thumbnails.+
Hope this helps. I don't know how to get iDVD projects to play in a DVD player via USB connection. You probably should post that as a new topic. Do a search first, as I think someone else has asked that same question. Simpler solution? Burn a disk and play that.
Message was edited by: Beverly Maneatis

IPhoto, iMovie or iDVD

Trying to make slide show of daughter's wedding. Would like to be able to have a couple of movies also on it w/ a sound track from iTunes in the background. Ken Burns effect might be a nice touch. - Suggestions of which program would be best to use? Or a combination? Would like to be able to save to a DVD to be played on DVD player for TV use. As you can tell - a really extreme rookie here. Thanks for any insights.
~bruce.

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie 6 as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 8 from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Problems converting from iMovie to iDVD

First of all, I'm new to this so I apologize if this is a ridiculous question.
I just spent days building a movie in iMovie, complete with photos and music. Because I couldn't figure out how to chop the songs to the lengths or starting positions I needed, I just used the volume control (click on the line and a yellow ball shows up and you can drag it down) to fade out songs as new ones were started. As a result, two songs are often playing at once but you can't hear one of them as I have that particular song turned down (which is good).
Problem: When I converted the movie to iDVD so I could burn it, the volumes were all back up and the songs play at once.
HELP!
Thank you.

Hi S
Go back to Your iMovie project.
Play it. Is it still OK ?
IF not. iMovie rendering process has harmed it. Re-import the photos and re-edit it.
Now - Don't use the "Share/Export to iDVD" function in iMovie.
Just close iMovie.
Locate Your movie project icon (with a Star on it). (I use to store it on my DeskTop.)
Start iDVD and import the movie icon.
Now iDVD will do the rendering an so much better.
This might work for You.
Yours Bengt W

Sectioning videos using iMovie and iDVD

I did my first conversion of some video from Mini-DV to DVD using my new iMac yesterday. I read the "Getting Started" tutorials for iMovie and iDVD and successfully burned a DVD. It came out good in the end, but I'm not sure I did things the best way. I wanted to section the video so when I watch the DVD I can click on a "button" from the menu for whatever section I want. So, I transferred all the video from the camcorder to iMac. That was easy. Then, I went into iMovie and marked off the sections of the video I wanted as "favorites" and it put a green line above it, then I selected the option for it to only display the favorites. So, it was easy to edit out the bad parts. Then, I dragged it all from the Event Library to the Project Library. I went to Share-Media Browser and clicked on Publish. Then, I went into iDVD and was able to get the video into it. But, I couldn't get it into sections like I wanted.
So, I went back into iMovie and did a File-Duplicate Project and named it with a "-1" at the end. Then, in the Event Library I selected the first section of the video (so it had the yellow boarder around it) then dragged it to the Project Library. Then, I did a Share-Media Brower and clicked on Publish. I went back to the original and did a File-Duplicate Project and named it with a "-2" at the end, and repeated the whole thing for the next section. I did this for each section, "-3", "-4", etc. Then, I went into iDVD and was able to get the video into sections like I wanted. I renamed the "-1", "-2" stuff to what I wanted and burned the DVD.
Did I do this right or did I do this the hard way? I have iMovie '08 7.0 (471) and iDVD '08 7.0 (1068).
Someone told me that the "sections" I'm referring to are called "chapters". I did a search for chapters and the only reference I can find is in the "iMovie '08 Getting Started" document where it says "Click Import. You can also import video from a project created in iMovie HD. … All chapter markers are also lost".

I would consider the usage of iMHD6 plus a slightly different 'structure' of workflow and final DVD ...
'problem' with Chapters, as they are implemented in iDVD, is, that they really functioning just as a bookmark... you jump directly to some specific position in timeline.. but then, the disk play 'til the end of a movie... (showing the next and the next and... chapters...)
iDVD allows sub-menus, think of it as 'Folders' ... which also could keep Folders..
create a movie, showing the whole program/dance...
now, select (in iMHD6) the few clips which show 'Right Hand Pass'
in the Export/Quicktime/Full Quality dialog of iMHD6, check the box 'selected clips only' ...
now, you get a/many .movs on your harddrive, with all the individual segments ...
due to lossless export, you can import that short clips into new iM projects and add content.. a slow-mo, a chart, some narration, recordings of other dancers doing the same 'move' etc ...
in IDVD, switch to 'map view' .. illustrated how-to here:
http://www.apple.com/ilife/tutorials/#idvd-create-67
now, create a structure for YOUR how-to... on top should be a button for the movie which shows the whole dance; create a sub-menu containing other sub-menus for 'spins', 'turns', 'passes' (= I have NO idea of Square Dance ); inside each sub-menu item (which is a 'Folder'), you place the concerning clip(s) (drag'n drop/choose form Media) ...
structured that way, you are allowed to add much more than just a chapter = a part of your movie; editing a 'standalone' clip of your section allows to 'process' that part, as mentioned above: you can repeat it, you can add slowmos, you can add stills/charts/paintings, explaining specificly that 'move', add a narrated and a no-audio version, whatever ... there's a nice plug-in from geethree.com for iMHD6, *Slick 6* (click here), called 'White Board', which allows drawings on videos..
when the 'chapter', which is now a clip/movie on its own, is finished, the dvd will jump back to the menu/submenu... and the viewer is allowed to watch it again, choosing the next one, a different one, or jumping to 'top level' to choose a different section or watching the whole dance...
only limitation: all movies added together should stay under 120min..

Can't get a project from iMovie to iDVD to burn

I did this once before when I was making a test DVD and it worked very simply. I shot about 50 min of video with my camera, downloaded it into iMovie and burned it to a CD-R from iDVD. It played back perfectly on my DVD player. Now that I'm trying to do it with a 2 hour video I shot, I cannot figure out how to get the (3 part) movie from iMovie to iDVD to burn? It all seemed obvious the first time and now nothing is working. I have the almost 2 hour video saved in both my Event Library and Project Library but cannot figure out where to go from here. Help!

Share to Media Browser (large) then import into an iDVD project?
mish

IMovie to iDVD to burn

I created an iMovie and now want to burn it to DVD. I use the "share" menu option in iMovie and select iDVD and that brings up iDVD. iDVD seems to force me to have one of its themes at the begining of the burned movie. So I take it I have to select an iDVD theme, set it up (some have drop zones and others do not) and then create a disk image from the iDVD File menu. Then use Disk Utility to burn the DVD. Is that procedure correct?
What if I don't want to add an iDVD theme to the iMovie at all?
I'm new to this (my first movie) and am just trying to figure this all out!
I am using iMovie and iDVD 6 plus and OS 10.4.6

Under the file menu in iMovie or in iDVD? I have made 12 minute movie in iMovie. I have done this before and exported to iDVD when I wanted to use themes (I just read that importing from iDVD is better, so I'll do that from now on). However, this time, I will be using my movie in a loop. It will continue to play at our school auction all evening, so I will want it to repeat when it comes to the end. I think that if I put in themes, I will have to push play in order to make it begin again each time. I'm hoping that if I burn a DVD straight from the iMovie, I can make it repeat using the settings on the television automatically, but I'm having trouble following these instructions. I don't see the "Onestep DVD from Movie" under my file menu. I see that it iDVD can make a movie directly from my video camera - is that what you were talking about? I'd love to know if it's possible to burn a DVD without any themes. Thanks in advance for any help!

First imovie, now iDVD.

Similar Messages

Maybe you are looking for