First Implementation - Random Questions

Hi all, I've been doing my first implementation for past week and I've come across a few questions that I haven't found the answers to (yet). While scouring the user guides and Google, I figured I might as well ask the forums to expedite my research.
1) I created a new security device, but canceled creation during the process. Now when I try to re-add the device with the same name, it complains that it already exists, however it's not in the device list. Where can I find it?
2) I added my Foundstone device to MARS and configured it to do topology updates. Is there any method for confirming MARS is pulling vulnerability information from Foundstone?
3) When I create a custom rule (keyword specific) to be notified on, a similar built-in rule fires, but mine does not. If I disable the built-in rule, mine will fire and alert me. Does MARS match only the first, or the best rule to fire on?
4) Is it possible to customize the main Dashboard, or only the "My Reports" section.
Thanks in advance for any replies,
TBC

Thanks for the replies. I was able to add the device and schedule the topology updates, but short of watching the Foundstone database for incoming requests from MARS, I'm unable to verify that MARS is actually querying and using vulnerability information from Foundstone.
Thanks again
*Edit*
Progressing through this issue. I found that if I go to Management > IP Management > "Device_Name" > Edit > Vulnerability Assessment that I should be able to see the detected OS and services running on the machines. I do not see that information.
Upon review of the logs, I found the following:
pn va VulnerabilityDiscovererFActory PN-1100: Java message: Unsupported device type: Microsoft,Windows,Generic, use Dummy VulnerabilityDiscoverer
pn va foundstone FoundstoneVulnDiscoverer PN-1100: Java message: Exception caught in getting JDBC connection: Db server closed connection.
pn va ThirdPartyVulnDiscoverer PN-1100: Java message: Foundstone: Can not get JDBC connection.
So it appears to be a configuration issue or at least a database communication issue. I will continue to pursue it.
Thanks

Similar Messages

Question: Singapore and Malaysia not available as an option in First Implementation

Hi,
I am going through the available countries during the editing of the project scope in First Implementations and can't find Singapore and Malaysia as options in the list. Please help.
Thank you.
Liew

The SAP Cloud for Customer user interface is available in the following languages:
AR — Arabic
Note: Functional limitations for this language are described below.
CS — Czech
DA — Danish
DE — German
EN — English
ES — Spanish
FI — Finnish
FR — French
HE — Hebrew
Note: Functional limitations for this language are described below.
HU — Hungarian
IT — Italian
JA — Japanese
KO — Korean
NL — Dutch
NO — Norwegian
PL — Polish
PT — Portuguese
RU — Russian
SK — Slovak
SV — Swedish
TH — Thai
TR — Turkish
ZH — Simplified Chinese
Note
Because Arabic script and the Hebrew alphabet are written from right to left, the following functional limitations currently apply to the support of these languages on the user interface.
SAP Cloud for Sales
Right-to-left (RTL) languages currently are not supported for e-mail integration, analytics or maps. Moreover, the activity timeline, the deal finder, the influencer map, marketing attributes and document flow are only supported for left-to-right (LFR) languages.
SAP Cloud for Service
Right-to-left languages are not supported within the agent workspace for viewing the document flow and the creation of response templates. Furthermore, while right-to-left languages are supported by Adobe PDF output forms, translated examples are not provided. Lastly, the use of the SAP Cloud for Customer Add-In for Microsoft Outlook® is not supported for right-to-left languages in SAP Cloud for Service.
SAP Cloud for Customer for iPad® app
Right-to-left languages are supported in online and offline mode alike, but currently are not supported for contextual help, sales quote previews, the navigation bar, maps, or the analytics dashboard.
SAP Cloud for Industries
Right-to-left languages currently are not supported for SAP Cloud for Customer industries solutions.
Thank you.

Generating random questions without duplication

I have 10 questions in my java program,
I can get them randomly generated but how can I do without duplication ?
Any help much appreciated

My approach would be, when you first generate the questions put them in a List. Then use java.util.Collections.shuffle(List) to randomize the List.
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#shuffle(java.util.List)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/List.html

Certificate Widget and Random Question Slides

I am in the process of evaluating Captivate 4. Twice now I have had an issue with using the random question slides with the certificate widget. In both cases I converted a Captivate 3 course in which the random question slides and corollary question pools had worked as they should. In both, I successfully added the certificate widget to the new course (Captivate 4) following the instructions in help.
In the first course, only one question pool would work. The others simply showed up as a blank slide. I was able to fix that by merging all the questions into the one working question pool. Wasn't the way I had wanted to randomize the questions, but it allowed me to publish the course. The certificate widget did work.
In the second course, none of the questions pools are working and the published version of the course skips right past the random questions that had been interspersed after each topic area. One again, this course had worked just fine in Captivate 3 and with Captivate 4, without the certificate widget. I do not wish to combine all the questions into one question pool. As I noted, I published the course without the widget and the questions worked just fine.
This leads me to believe that I am doing (or not doing) something when I include the widget that is causing the problem. I can't imagine what that would be, but the fact that no one else seems to have posted this issue makes me think it is something I'm doing.
I am not using an LMS. I'm publishing to .html file that resides on our LAN.
I hope someone can help!
Thanks!
Susan

Hi Peter,
A number of users (myself included) have encountered issues with the random question slide feature - some of which is due to browser cacheing. If you can spare the time please use the web address I have included below to report this issue to the Adobe Captivate team.
Adobe Captivate Feature Request/Bug Report Form
Best - Mark
Visit the macrofireball blog

[captivate 3] random question slide doesn't work

hello,
I'm noob in Captivate.
I use Captivate demo (in french).
I want to make a quizz for my students.
So, I create a "question pool manager" with 1 pool project
"reseau_locaux".
This pool project have 13 questions.
Then I click "slides" on the filmstrip, I add a "Random
question slide" and I click on the "Question pool menu" to select
my pool project "reseau_locaux"
After generating project, I have only 1 question from my
question pool project.
I read the help guide but it's not help me.
It gets me crazy...
I hope you understand my english.
thanks

Welcome to our community, Anthony
Basically you are doing everything right. I'm a bit unclear
on what you were expecting to see. Perhaps it will help you if I
explain how the Question Pools and Random Questions work.
You define a pool of questions using the Question Pools
Manager. You advise you have done that. So far so good.
You then insert a Random Question Slide. When you insert one
of these, you point the slide at a Question Pool. You advise that
you have done that too.
I'm guessing here that perhaps you expected that by inserting
a single Random Question Slide you would end up presenting all 13
questions from the pool. Just in random order?
If so, that's not how it was designed to work. What happens
is that a single random question from the pool is presented. If you
desire to see all 13 of your questions, but in random order, you
need to insert 13 Random Question Slides and point them at your
Question Pool.
You may wonder at this point if you do this, will it would be
possible to see perhaps question 2 multiple times. And the answer
to that is no. Once a question has been presented, it is removed
from consideration in the pool. So after the first one is
presented, Captivate randomizes from what remains in the pool.
Hopefully that helps better explain it.
Cheers... Rick

Scorm will not load random questions

Good afternoon.
Moodle 1.9
Cp7
My SCORM will not load when I have used random questions from a pool. I published the same course with a set amount of questions and it loads perfectly.
Does anyone know of an issue with using random questions?
Thank you in advance.

Blackboard Learn in Compass 2G
Cp8
Our SCORM reports when using random questions not-from-a-pool, but the report is useless. It says, for instance, that the user selected answer b for question 1, but because we randomized questions, we have no idea what answer b was for that student.
If anyone knows of a way to get the actual question into the report, please respond. Meanwhile, we're turning the randomizing off.
This seems like a pretty big hole in the data reporting architecture. I am working with my Compass administrator to see if we figure out if Captivate is reporting the data to Blackboard, or if it's the SCORM reporting implementation in Captivate that is responsible.

When I attempt to sign up for the Samsung website using Firefox on my macbook, it returns an error that the random question answer is wrong

I was attempting to create a user at this site:
http://www.samsunggalaxys3forum.com/forum/register.php?do=addmember
It asks a "random" questions "Floors are horizontal, walls are ___?" When I hit submit, it returns an error that the answer was wrong. I tried several times using my macbook running firefox.
I get to work, where I am using an intel based machine running Windows 7, IE 9 and am able to register on the site and answer the question with no problem.
I have had the same problem on sites that use captcha - I cannot get past inputting the captcha phrase, as it returns an error every time, while using IE9 is problem free.
Is there something wrong with my setup of Firefox?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Two random questions

hey guys.. i have two random questions..
1) when you recalibrate your battery... after you drain the computer and leave it for 5 hours.. when you RECHARGE IT (before its fully recharged) are you allowed to use it? or are you only allowed to use the macbook AFTER it's recharged... (because in the instructions it only talks about using it for the 2 hours AFTEr it's rechaarged)
2) also... i always wondered if there was a better alternative between amc the ripper and handbrake (since mac the ripper apparently can rip different region coded dvds)... but ir ealised mac the ripper does FULL dvd rips whilst handbrake converts it into like mp4 and stuff... is that true? (as in.. u cant do vice versa on each?)
thanks a buncho everybody! go the mac..

2) I use handbrake if I am planning on watching the
DVD on my ipod etc and Mac the Ripper to copy
(Backup) full DVDs. Obviously I do this in America as
it's illegal for some reason in the UK.
It is illegal in the US too. Seems "fair use" does not apply to DVDs and disabling the copy protection (which you do when you rip your DVD via mac the ripper or handbrake) is against the law.

Some random questions about integration features

Greetings,
after working for a few weeks with Autovue's ISDK (web server) and having some sucess with its integration with our custom CMS, I have a few random questions about what can be done and what can't be done. So, instead of opening many new threads, I'll post them here together.
1) Translation. We are localised in Russia, and its translation is incomplete. I have found a tra_en.properties file in AutoVue/bin, and a description about how to create a properties file for custom actions. But no information about how to translate to other languages - and russian translation appears to be packed within the jar of the applet. Is there a clean way to translate, or refine the current translation, so we don't get a mix of russian and english commands in the applet? Because my tries using EXTRABUNDLES have failed, as I don't want to add a bundle for extra actions, but to replace it for existing ones.
2) Attachments in markups. Markups allow to attach other files, but since our CMS is custom, we only get the option to attach files from our local drives. We did no browse integration with the CMS, as people with different levels of permission will have different access to files there, and we considered unnecessary to provide that level of integration. We are considering to remove this action from the GUI, but before that I'd like to evaluate how hard would it be to generate an upload file action, so the attached file would be stored in the custom CMS and linked to it so the whole thing worked. My guess is "it will be hard and time consuming", so for now, we are considering to delete this feature in our integration.
3) Is there a way to resize the Open markup dialog? We have several properties displayed, and fit well within a standard screen, but the dialog is small and you have to scroll the table to see all properties.
Thanks for any assistance with these issues

As always, thanks for the fast answer, Artash.
Yes, now I see attachments are stored inside the markup file. The problem is, when I open markup mode for the attachment, since the attachment uses some kind of default access method, my url's from the integration with the background CMS are broken completely. I believe the ideal state here would be to make some kind of inner markup for the attachment, maybe stored within the original markup file along the attached file. Or maybe it works that way, and I need to access it with the default gui action instead of my custom one. If that is the case, is there any way to tell the gui file how to differentiate a standard opened file from an attached one? If so, the issue has solution. If not... Well, then maybe something escapes me.
Edited by: Jordi Bosch on Apr 6, 2012 12:27 AM

Publishing w/ Random Questions

Hi,
I am using random questions in one of my programs and about
to send it off to the client. This client has Captivate and would
like for me to send the CP files. My question is, if I send the CP
file for the program, will the random questions in the pool go with
it? If not, how do I get them there?
Many thanks for your help!

Hi gbcvette
Yes, your random questions would be contained inside the .CP
file.
Cheers... Rick

HTML random question score incorrect. SWF works fine

Version 8.0.1.242
Question pool 25 questions. Random Question slides inserted. All questions set to score 1. 24 are multichoice, all standard.
Published as HTML
Score reported is 1 out of x.
I have tested with 3, 5 and 25 random questions from the pool. But the score is always 1 out of x
Published as SWF
Works correctly
I really need the HTML version.
Closed, reloaded. Saved as - retested. Turned it off and turned it back on. Sacrificed a mouse...
Andy

Correct questions
....Should be same as total points scored anyway as there is 1 point for
each question.

Oracle EBS R12 Pre - Implementations phase question air

Oracle EBS R12 Pre - Implementations phase question air
Posted: Jun 30, 2009 10:22 AM Edit Reply
Dear all Gurus,
We are going to implement Oracle EBS r12, for industrial concern, we have following quires if any peer may suggest.
1) we heard the oracle R12 has build new release with 11g db , is it been practical for choosing it for corporate ???
2) Linux Read hat which version is more stable like 5 releases is compatible with R12 new release?
3) We are also thinking for 64 bit architecture rather than 32 bit, could any one figure out the practical pros and cons for this.
4) We are also wondering about the server machine brand and its configurations like HP DL380 G6, DELL 2850? could any one share abut his experience about the same.
5) What sort of Server configurations (Processor , 2way -4way , RAM , HD and other accessories ) for r12 Multi node setup for 150 clients (DB Server , Apps Server , Test Prod )
6) What should be backup strategies like tap backup and how much space requirements we must have provisioned for retaining almost 2~3 month backup.
7) Application implementations methodologies?
8)
I know to address our queries would be time consuming for you bust peoples , but I would really oblige for being shared your journey this would defiantly the PATH way for other like mentoring for others.
looking forward your valuable instructions ASAP.
Thanks & Best Regards
Muhammad Waseem
Manager IT
Neee-Has Textiles Divisions
31-Q Gulberg II Lahore
Pakistan
92-0333-4240949

Duplicate post.
Oracle EBS R12 Pre - Implementations phase question air
Oracle EBS R12 Pre - Implementations phase question air

Random question slide not shown when FP 8 or FP 9 output

Hi everyone
I've just begun to use Captivate a month ago, so it is not
that much experience I can contribute with by now.
One thing I have recognized is that I get some problems with
random questions slides made from different question pools when
using Flash Player 8 or 9 in the output otions.
When using Flash Player 7 everything works as supposed: one
random question is shown for every random question slide using one
distinct question pool for each random question slide.
When using one of the two others some of my random question
slides are not shown. There are slides that are played - meaning
that the player shows an empty slide for the time of 3 seconds -
but the content is not shown. This happens only for some of the
random question slides, and those are the same question slides each
time, I publish - but when working or dragging around with the
random question slides and publish again, the problem would come
with some other random question slides, not positioned the same
place as before, but showing the same problem in each published
version.
As written before each question pool is only used once. The
different question slides used in the question pools are all
duplicates, naturally with adjusted content.
Does anyone has experienced something like that before? Could
there be any other trouble with the content when using Flash Player
7 in the output options, like quiz not playing in newly updated
Flash Players ore something like that? Anything?
I appreciate your suggestions or comments! Thanks in advance
and kind regards,
Lars

Some more info - and a working solution...
I have worked on this topic a bit more - and found out, that
I have a problem with output option set to Flash Player 7, too.
When I delete every other navigation option than the "next
question" (what is it called in english?) button, I get this
problem:
The quiz now "freezes" randomly, not every time, but again
and again. The quiz has both random slides from question pools and
simple question slides.
I have found out, that putting the simple question slides
into question pools and then showing a random slide from those
question pools fixes the problem.
Has anyone experienced problems like that? Other solutions?
Kind regards
Lars
Maybe someone has a similar problem.

Convert to Question Pool random questions?

We are updating a course we developed last year (prior to
Captivate 3). This year we want to apply Captivate 3's "Question
Pool random questions" to this course. Is there a way to create the
question pool(s) in this existing quiz, and then add last year's
questions to them without having to re-enter each question into the
Question Pool Manager?
Thank you for any tips!

Hi Jan
Sure thing. Just convert the version 1 or 2 project to a
version 3 project. Then define a Question Pool. Once you have done
that, switch to Storyboard view. Select the question slides you
wish to add to the pool and right-click. You should be presented
with an option to add the selected slides to the pool.
Once you have moved the question slides to a pool, you would
then insert Random slides that point to the pool.
Cheers... Rick

How to make Random questions work without closing and restarting?

I have a quiz using random question slides and random pools.
The random slides display random questions when I run the CP4 file, let it close then relaunch it. I'm using an LMS.
I would like to be able to repeat the quiz again without closing and relaunching, but my method does not work.
I tried using a button (retake) on the last slide to 'jump to' slide 1 when clicked. The quiz does repeat, but show the exact same questions.
I thought there might be a variable that would reset the quiz, but could not find one.
Does anyone have method to do this?
Thanks,
Dave

I don't know of a way. My experience is the same as yours. The quiz questions are selected and shuffled when the lesson is launched. When 'retake' is clicked, the quiz repearts the same questions. The only way to get a new set of questions is to close and relaunch it.
I suppose there's be some function to invoke or array to manipulate via AS, but I've no idea what that may be...
So no help here, just backing what you're seeing.
Erik

First Implementation - Random Questions

Similar Messages

Maybe you are looking for