First install, and unable to log in

I've just installed Solaris 10 for the first time. The installation eventually went smootly after I put the cd drive on a different IDE channel to the hard drive. It now boots to the login screen, which prompts for a username. However, I haven't set one yet! The installation only asked for a master password, which I set correctly and know, but I haven't got a username.
Please be kind to a noob :)

Use 'root' as your username. Once you are in as root, you can create another user for future logins. I found no other way.

Similar Messages

I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile

I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile.
and I can't install my old adobe X anymore
what to do?
Mika

Change Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

Is it possible to migrate BCM 2003 data to BCM 2010 w/o first installing and migrating it to BCM 2007?

Obviously. I have my BCM built on the Office 2003 Outlook 2003 BCM platform. Now with a change of operating systems and various upgrades including the installation of Office 2010 with Outlook 2010 w/BCM, I seem to have no pathway to import my 2003
BCM Backup. I am now without access to my BCM database information and seriously compromised in my business. Therefore the question: Is it possible to migrate BCM 2003 data to BCM 2010 w/o first installing and migrating it to Outlook
2007 w/BCM?
Thanks Den

The reason I want to use the Back up and Restore process is I really want to retain my original Create Date on my Business Contacts
I will try to answer your questions below:
Question: Is there a URL to download BCM 2007 … I haven’t been able to find one anymore – I saw one a couple years ago but can’t find it now.
As info, I am running this on a Test System so I know exactly how to get BCM 2003 to BCM 2010 with the Create Date intact.
Yes, I have admin status.
BCM seems to work fine after I installed it. I didn’t go through an extensive test though.
What do you suggest I do to confirm BCM is working since I don’t have any data in it?
After I submitted my question to this forum, I tested the Export / Import method of getting my data to BCM 2010.
I confirmed the Create Date is the Import date. Drat!
Then I restored the OS System to the point where I had installed Office 2010 w/ BCM.
Then I Ran the install of the newer version of BCM. It “discovered” there was a BCM version already there and asked me if I wanted to delete it.
I deleted it or the install deleted it … I can’t quite remember.
Ran the install.
OK, here’s some weirdness I noticed:
The Download of the “newest” version of BCM I just downloaded is: V-4.00.12006.00
(KB 2793723.)
When I looked at the version number – File > BCM It stated I had BCM V-4.00.12006.00
This confirms the installation worked.
I ran the Restore from the backup of BCM 2003 and it states it has to convert from 2.03606.0 to 4.0.9812.0.
I knew it would have to do a conversion.
BUT, it states it’s going to convert to version 4.0.9812.0 NOT version 4.00.12006.00!!!!
How did Version 4.00.12006.00
get there?
Which one is the newest one?
Any thoughts??
I clicked “OK” to start the migration.
After a while I got the “Database Migration Unsuccessful” message.
Below are some errors I found in the Event Viewer > Application.
The date on them is about a week before the latest attempt to go from BCM 2003 to BCM 2010.
They are not from the restore I just described because they don’t have the date I ran the latest restore.
Any thoughts??
Event Viewer > Application log:
============================================================
1st Event Error:
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'fulltext_stopwords', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00
============================================================
Event Error somewhere in the Middle of the list of errors.
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'system_columns', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00
============================================================
Last Event Error
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'all_objects', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00

Logged out and unable to log back in

While working on my Mac the computer suddenly logged me out and I am now unable to log back in. When I try to log back on the system logs in for 1/2 seconds before kicking me out to the initial log in page and asking again for the password. I tried shutting down and restarting and safe boot mode but nothing works.
I am however able to log in the account I set up for my son (which is the one I am connecting from).
Anyone knows how to log back in the master account either directly or through my son's account?
Thanks

Hi mazde, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know where that leaves us.
Is it a Filevault account?

Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcome

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

Qosmio G30 display flickering and unable to log into Windows

I have to press F5 to make the display visible everytime I boot up. I thought that it was a software related issue and I tried to format the HDD with original recovery CD. However, the screen keeps flickering from the BIOS stage.
Now, it is even worse. The screen is flickering when power up and I cannot log into Windows MCE after the HDD formated.
After reading the related articles and FAQ, I suspect it was a graphic card (hardware) issue.
My graphic card is NVidia Go7600. Is this true and is it a must to change the hardware (graphic card)?
Appreciate your advice before I contact the local support team.
Thanks a lot!

Hi!
Thats a strange issue. Do you have the same problems on an external monitor?
If a display is flickering, the display itself is defective because the FL-tube is causing the error. I think the best is, when an ASP (authorized service provider) checks your Qosmio G30.
Here you can search for one:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Good luck
Bye

Windows 2008 Server boot loop and unable to log on in Safe mode

The Situation: I used msconfig to reboot Windows 2008 Server r2 into safe mode. On rebooting, boot progresses ok and the log in screen appears very quickly, then disappears and the machine reboots. I've tried typing the password very quickly and whether
I get it wrong or just can't get enough typed in time, I don't know, but the reboot loop continues. So, i can't log on and can't change safe boot back to normal.
I know Server 2008 uses bcdedit and no longer has a boot.ini, so I don't know if it is still possible manually to amend a boot file so it starts in normal mode again. Can anyone help me to break out of this boot loop without having to resort to anything
major, such as reinstallation?
Just to make clear, I haven't updated the system and the only change made was with msconfig to require safe boot on restarting.
Thanks

from the safemode try this syntax
Syntax: bcdedit /deletevalue {default} safeboot
http://technet.microsoft.com/en-us/library/cc721886(WS.10).aspx
http://www.virmansec.com/blogs/skhairuddin
How on earth is that a good answer? Sorry for the necrosis here of bringing up a post 9 months later, but I just ran in to this issue again. The OP said that he was STUCK IN A BOOT LOOP having placed himself in SAFEMODE already.
How is he supposed to type this in if he can't log in?
What worked for me was to keep striking F8 like a cobra during boot and telling it to use the Last Known Good Configuration option, after the 4th autoreboot, it let me log in and let me switch it back out of the safe mode and back to the normal boot. Yes,
I am aware this is quite lucky and now I don't have to rebuild all my server set up, and that your mileage may vary here, but, keep trying, you might be lucky.

Photosmart d110 - fatal error on install AND unable to uninstall?

I purchased a d110 yesterday and receive a fatal error upon install (1935). I looked up the problem on HP support and one of the steps is to uninstall the software (how is there software there anyway when I get an error message that says it can't be installed?). I have tried EVERYTHING to do this - via the uninstaller in the Hp d110 folder, via the control panel, even a 3rd party cleanup tool. It is still there. I attempted the solution to the error 1935 code without bypassing that step and still get the fatal error. This is the most frustrating thing! Anyone been through this? Thanks!
Peggy

Hello bakura510
The Fatal Error can be caused by quite a few different things. There is an article meant for troubleshooting a variety of them. I would suggest taking a look at it and reading through to figure out the most appropriate method for fixing your particular error.
Fatal Error
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Restored to test databases and unable to log in to test DB

Good morning,
I restored current SQL backup to our test databases, however I am not able to log in to the test databases. I receive the error: Microsoft SQL Invalid Object Name dbo.cnf company info.
What does this indicate?
The main database that we use daily is OK.

Hi,
Try to restore by using the below steps :
How to Restore Database Backup in SQL Server 2012</title> <TITLE>How to Restore Database Backup in SQL Serve…
How to Restore Database Backup in SQL Server 2012</title> <TITLE>How to Restore Database Backup in SQL Serve…
Regards,
Prasad

I lost my i phone 4 s and unable to log in i cloud

Hi I lost my I phone 4s on 25th of april now ia m trying to log in to i cloud but its not supporting.... please hekp me

Where are you trying to log in to iCloud? The website, or the Find my iPhone app?
If the website, from where are you trying to log in? Your computer, or an iOS device?
To use iCloud.com you need to be using a computer web browser, not a mobile device.

100% Freight in First Installment

Hi Experts
Our client receive payment in installments they charge 100% taxs and 100% freight in first installment.For tax we can define it in payments terms but how to include 100% freight in first installment.
looking forward for help..
Warm regards
anand

Dear Anand,
The only workaround that comes in my mind is modifying the first installment in a way that it will consider the freight.
E.g. if we supposed that
the item price is 100 and we have quantity 1
and there is a VAT.
You can select the option 'pay tax on the first installment' and calculate the first part of the 100 for that installment plus the freight.
When you find the total write it in the first installment value.
This is a valuable workaround if the customer knows in advance how much the freight will be for a specific Business Partner.
Can this work for you?
Marcella Rivi
SAP Business One Forums Team

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?m

I experience similar problem with working in internet. Also use Safari.

Unable to log in to user account after installing windows 7 using Bootcamp

Hi everyone,
I need help. I have been at it for days, I have googled every which way but I am not able to fix this. Basically my problem is that I am unable to log in to my user account after I used Bootcamp to install windows 7. I will explain what I did up until I couldn't log in.
I backed up my user account using Time Machine(I was logged in as the user). The account had FileVault activated and I neglected to disable FileVault before back up. I just didn't think to, it did not even occur to me! Then I partitioned Macintosh HD, I was doing this with my step son and he thought we were supposed to partition the hard drive first before running Bootcamp! After that was done, I couldn't run Bootcamp because obviously we had whipped the HD clean! Anyway, I reinstalled the OS X using the internet, after which I run Bootcamp and successfully installed windows 7. Then I went on to restore my account using Time Machine, only when I try to log in I get the error message "you are unable to log in to the user account at this time". I tried every possible solution I could find on here, including creating a new admin account, deleting the old account but saving the user folder and then routing the new account to the old user folder. Still nothing. I have tried logging in as a root user, reset the master password and deleted FileVault files from Library/keychain in the hope I would access the user account, but to no avail. What's more is that I can't even see the sparse bundle or sparse image files that people keep referring too. I can't even find it on the Time Machine back up! I then thought I would cut my losses and try system recovery using Stellar Phoenix Mac Data Recovery (cost me £81) but it did not recover any of my photos, music, videos or documents.
I honestly can't come to terms with the fact that I am unable to login to an account with 3 years worth of pictures and documents. I am having a hard time letting go. Is there anyway possible to crack this?
Thank you in advance.
By the way, I am running Mountain Lion OX 10.8.4 on MacBook mid 2010

I have this exact problem. Installed Bootcamp on a networked iMac running Mountain lion and and can no longer log in to my Mac user account. Would love if any of the pro users on here can shed a bit of light.

I am unable to log in and do not get an error message

I have not been able to log in to install flash player to my MacBookPro. I have been on chat and the advisor recommend I go through this forum.
My login ID [email removed - just don't want you to get a mountain of spam]
While I am able to login to the adobe site, I am unable to log in after downloading the installation file when I get to the directions box that says"Install Adobe Flash Player is an application downloaded from the Internet. Are you sure you want to open it? I click OPEN and then get a box which says "INSTALL ADOBE FLASH PLAYER wants to make changes. Type your password to allow this" It is at this point that the box jiggles after I enter my username which is my email address and my password and I am unable to proceed with the instalation.
I am trying to set up my new MACBOOK PRO, but this happens on both my old macbook pro and the new one.

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240

Mac OS X 10.5: Unable to log in after an upgrade install fix does not work?

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

First install, and unable to log in

Similar Messages

Maybe you are looking for