First install is ok, then the reboot which takes to the config. crashes

Hi, I've got some issues with boot camp. I use an 20 inch iMac Aluminum with 2,4 Ghz etc(midline iMac) and an updated Leopard.
I start boot camp, go through all the wait until windows copies everything, then choose a partition and it copies evrything again onto the partition and everything seems ok. Then, the mac supposedly reboots into the Windows configuration mode. But all I get is a black screen with "Disk error" after a prompt to click any key(which I do, but doesn't help).
I read on the troubleshooting page that formatting the Partition with Windows Setup rather than keeping the original Boot Camp format would help - didn't work.
Thank you in advance! Cheers.
Message was edited by: tonich03

Welcome to the club!
I have say it right from the beginning, Adobe just does not care to fix any thing. The last update was over 3 years ago and the new version CS5 is due this April. You think Adobe will care to provide an update?
This CS4 version I have read that have problems with colors, so I think the Eye Drop Tool bug will not be fix.
Adobe did not fix Icon preview since CS3 but the free program called Bridge can generated icon previews for any Illustrator file version.
Adobe did not fix the extra anchor points bug since CS3.
CS4 has a Crop Mark bug.
CS4 can crash if the program decides that one of the font you are being using before is corrupted.
So in short, I think Adobe is going from bad to worst!

Similar Messages

Hi, when typing an email the font on the first line is different then the second, can you help fix this

Hi, when typing an email the font on the first line is different then the second, can you help fix this

I can offer suggestions, but I can not fix it.
Press enter three or four times before you start typing and then move the cursor back to the start. What happens is your point of insertion gets outside your predefined font range, it is a know bug and that will help you "stay in the lines" Another option is type Rick, go back to the start and then type your message. Anything which keeps the insertion point from the very end of the email really.

So, I made the mistake of updating Garageband 09 to GB 11 without exporting my songs first. When i try to open one of them it freezes up and won't respond then the program crashes.... any ideas?

So, I made the mistake of updating Garageband 09 to GB 11 without exporting my songs first. When i try to open one of them it freezes up and won't respond then the program crashes.... any ideas?

stopmotion wrote:
That's what I figured from what I've been reading. Will have to see what the cost might be and if it's a worthwhile investment considering the age of the computer.
You can get a first-gen Mac Pro on eBay for around $300. It can run OS 10.4 through 10.7. Something to consider, depending on the cost of a logic board and the hassle of replacing it. You transfer your existing drives, as long as you have a spare external drive. You would clone your G5 drives to the external drive as disk images, then move the G5 drives to the Mac Pro, re-format them GUID, and clone back the contents from the disk images on the external. I did this recently when I retired my G5.

I have just updated my iPad to IOS 8.1.3 when I now try to open the emails nothing comes up and then the app crashes and returns to the home page. What should I do?

I have just updated my iPad to IOS 8.1.3 when I now try to open the emails nothing comes up and then the app crashes and returns to the home page. What should I do?

Since yesterday morning about 11:00 I have been having TERRIBLE email problems on this iPad 3G. Email comes in (I hear the sound) but nothing displays -- no folders, no content, no nothing in e-mail. The blank email screen shows up and then disappears after about 10 seconds, taking me back to the Home Screen.
Right now, the only way I can see email on this device is to log onto AOL via the AOL app.
I have been doing a lot of online reading about the problem. It has to do with iOS 8.1.3 and it affects older iPads and iPhones. I'm having no problems on my iPod touch, which -- fortunately -- is so old it cannot update its iOS 6.
I waited to update the iOS on this iPad until iOS 8 was "mature." That was about 2 weeks ago.
Anybody know know if Apple is aware? working on a solution?

Facetime crashes upon connection. I see the other's video under mine, then the program crashes. we are uding emails to connect. my OSX = 10.7.5, dual quad core (5.1)

Facetime crashes upon connection. I see the other's video under mine, then the program crashes. we are uding emails to connect. my OSX = 10.7.5, dual quad core (5.1)

Hi there,
If you purchased FaceTime from the Mac App Store, the first thing that I would recommend is removing and reinstalling the application. Take a look at the articles below for more information.
OS X Lion: How to remove Mac App Store apps that appear in Launchpad
http://support.apple.com/kb/HT4673
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you continue experiencing issues, you may want to review the article below for some further troubleshooting instruction.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Hope that helps,
Griff W.

My iPhone opens up my app (clash of clans) it loads half way then the app crashes and closes HELP!! And yes I have updated the game :(

My iPhone opens up my app (clash of clans) it loads half way then the app crashes and closes HELP!!

Hello, Dirk.j.fourie2525.
Thank you for the question. I have had issues with third party applications myself and I will do my best to help you. I am attaching an article below that covers most troubleshooting steps for third party applications.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
If you are still experiencing the issue after processing the steps in this article, you may have to contact the developer of the application to report an issue.
Cheers,
Jason H.

HT202879 recently saved a Pages document to Dropbox. Now I cannot open it in the new Pages app, and I cannot use the previous Pages version to open it. Attempting to open the document gives me a flash of a page and then the program crashes. Anybody have a

I can go to Time Machine and find the document, even read it in Time Machine, but when I try to restore this version I get the same crash. I cannot open with Text or RTF. Preview opens a fuzzy version and can save out as a .PDF, but when I try to convert the .PDF to Word I get a bunch of unusual characters. Any help anyone can give would be greatly appreciated

OK, I've tried all these tips. Here's what I finally have to do: I open Time Machine. I click on the Pages file and open the Pages file in the Time Machine window. (Restore does not work; nothing works).
When the Pages file opens, I begin taking screenshots using shift-command-3. I take shots of all 200+ pages of this document. The screenshots are saved to my desktop.
I then move all 200+ screenshots into one folder, because, face it, that's too many icons to work with on one desktop screen.
Then I select all the screenshots in the folder at once and open them all in Preview. Then I crop every screenshot using command-K, and save using command-S, and then close that image using command-W.
When I have cropped all 200+ screenshots, I go back through the folder one by one and adjust the color on each one, moving the mid-range color up to about 75% and the sharpness filter up to about 75%, in order to compensate for the fuzzy image of the screenshot. You can't create a searchable PDF with an image that fuzzy. I do this one by one.
I make sure everything is saved.
Then I open all 200+ edited screenshots in Preview and print them out.
Then I take the 200+ pages of this ****** Pages file and run them through my scanner, making searchable 600 dpi PDFs.
Then I go to each of the 200+ PDFs and highlight the text, copy, and paste into a NEW word processing document.
If I'd had 300 pages like the last manuscript, or 700 pages like the one before that, I would have created an Automator program to do all that, but hey, this is not the kind of **** you expect from Apple. Really. It's taken all week.
So thanks for your help guys, but no other suggestions worked. I tried to force a download of the file from Dropbox, but got the same result. Besides, my Dropbox folder is saved locally on my harddrive, so it's not their fault. In fact, there is no data in the Dropbox folder under this file name, only preview files. Somehow the Time Machine will open the complete Pages file while in Time Macine, but will not import the saved Time Machine version to the working desktop because it is a preview (i.e., not Preview) image. This is a Pages problem, not a Dropbox problem. Pages did not save the full file.
If anybody knows a better way to do this, I'd like to know about it. If anybody knows whether I will ever be able to trust Pages again, I'd like to know that too.

I consolidated my library to an external hard drive then the drive crashed. How can I restore it?

I consolidated my library to an external hard drive, a few days later the drive crashed. Everything still exists on the local computer in the old locations. How do I tell iTunes to use the old locations again? I don't need to redownload anything, I hadn't purchased anything between the consolidation and the crash.
Due to space contraints, the way it was stored before was not the iTunes default. Most things were in the default location, but the media folder location was on a separate hard drive.

Sort of. My media was on multiple hard drives, some local, and actually some networked, and then I conolidated it to a single external hard drive. Renaming drives and moving files sounds like a recipe for disaster.
When doing a consolidation, files are copied to a new location and the old ones are left untouched. Does iTunes create a backup database of the file locations before doing a consolidation? I could use the backup if that were the case, since everything still exists in the original locations.
I've recieved my replacement hard drive for the one that crashed and I may be able to copy everything back manually if I knew where it went. I looked inside the iTunes Music Library.xml to see if I could figure out the folder structure, but for some reason they all say they're located in the iTunes folder in My Documents. They're not, of course.
Would the Previous iTunes Library.itl be of any use, or is that for another purpose?

HT201210 I received a pop up asking if I wanted to update my software. I accepted and the (long) process started. Then the update "crashed" and I was told an unknown error had occurred.

I received a 'pop up' asking if I wanted to update the software in my iPhone. As I always accept these messages to keep my phone up-to-date, I accepted.
A long (25minute) process started, but at the end of it, the process "crashed" saying an unknown error had been encountered!.NOTHING has changed with my computer of my iPhone, so I say this is an Apple problem. I cannot start or use my phone now - all that shows on the screen is the iTunes logo and a connectivity graphic - see attached photo

Hi Kalaivani Krish18,
If you are having issues with your iPhone attempting to update, you may want to try the troubleshooting steps in this article -
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
Thanks for using Apple Support Communities.
Best,
Brett L

How do I manually uninstall 3.5.6? Each time I attempt to upgrade to 4.0 the install program asks me to reboot which I have done numerous times. Add/Remove Programs prompts the same message when selecting "REMOVE" option.

Attempting to upgrade Firefox from 3.5.6 to 4.0 but it prompts me to Reboot to finish install. Rebooting PC does not resolve the issue. I get this message when attempting to remove via Windows/XP Control Panel "ADD/REMOVE" programs and if I attempt to execute "FIREFOX 4.0 SETUP" program.
How can I manually uninstall FIREFOX?

The easiest way of doing it is to click '''Help '''| '''Check For Updates'''. The first time you do it, it will upgrade to v3.6.16. So you'll have to repeat the same steps to get to version 4.0.

Can't just install 6.0, must first install 4.8, then upgrade

HI,
Anyone else had this? I did a clean install of XP and installed 6.0 (thank goodness I have all install files since 4.7). However, though it installed okay, it left me with the problem of QT playing mp3 samples on websites, though I had all settings set to play them on my QCD player. BUT, when I installed 4.8 first then 6.0, the problem went away. ???
Thanks

well, i think i fixed it.
i did some searching through all the apple discussions and via google and the one solution that kept cropping up was booting from the install DVD and running disk utility. after that, if verification or repair won't work, zero out your disk, then reformat it.
i did it. now i am running in an almost completely naked OS X and its weird
but, the problem seems to be fixed now. we'll see.

Windows Server 2012 R2 (VM). KB3000850 installed successfully but then after reboot it couldn't complete update & uninstalls

Hi,
Every time we try to install KB3000850 on a Windows Server 2012 R2 (Virtual), it says it installs successfully, reboots, but then before the logon screen comes up it says "We couldn't complete the updates, undoing changes..." and it uninstalls
the update. Yet, when you look at installed updates, it shows KB3000850 yet it's still availabe when you look for new updates, and if you run the update again manually, it doesn't say that it's already installed. What gives? :)
(no hyper-v)
Thank you!

Hi,
Please refer to Dave’s suggestion and check if help you to solve this issue.
Just addition, please also refer to following KB and check if can help you.
"Failure configuring Windows updates. Reverting changes.
Do not turn off your computer" error when you try to install Windows updates
Meanwhile, please check Windowsupdate and CBS log files if fine more relevant clues.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Pages print in draft mode. first line normal and then the rest faint, how dop I restore this please

Pages printing in draft mode. First line normal and the rest is faint.
Please, how do I reset this.
Thanks
Bruce

If you are using a printer (e.g. HP) that has an Economode (powersaver) setting, leave this off. Otherwise, your prints will look washed out as though toner was depleted.
Since Pages itself does not have a selectable “draft” mode, the focus will be on your printer hardware and configuration.

I made a book called Mya in Iphoto and sent it to Apple to which I received. Since then the book crashed out of Iphoto and wondered if Apple has the file so I can order it again.I have a back-up called Rocstor and can't retrieve it

I made a book called Mya in my Iphoto projects and it has crashed out of Iphoto. I was wondering if the Apple company still has that file so I can order the book again. I backed up my data in a machine called Rocstor last october but when i went to retrieve that book it said I had to download Iphoto back into my computer and i had already updated Iphoto with Ilife and it would not go back in

Apple keeps files for 40 days for reorders according to a previous web site - give them a try
LN
BTW - Once a year is NOT a backup - I use TM so I have at least one per hour plus do a daily clone for a second one and an occasional offsite one (10 or 12 times a year) for the third one

I tried to update firefox, then the update crashed. I cannot open firefox any more because the "firefox.exe" has been "changed or removed". How do I fix this?

I was trying to update firefox to open a pdf file from a website that said on the top of the page that my plugins are out of date.

Hi,
Run an antivirus program first. It's very possible you just got stung.
If that didn't fix it, reinstall firefox.
Hope that helps.
Ian

First install is ok, then the reboot which takes to the config. crashes

Similar Messages

Maybe you are looking for