First Line Truncated

Today I noticed in the Bridge and Photoshop forum that my first line of a response does a carriage return about a quarter the way across the page. The first few times I thought I inadvertently hit the enter key. But after it happened each time I decided that was not the case.
Has anyone else experienced this?
It did not happen on this Forum.
Damm, had to retype as it gave me an error message on posting.
Tripple damm, this is the 3rd attempt, "unexplained error has occured", but still logged in. But did a copy before posting and then paste this time.

Curt,
Welcome to the "New & Improved" Adobe forum experience. There is a new feature, the automatic line break. When the editing screen thinks that you need a line break, it gives you one.
Acutally, this is happening to many of us. The published "fix" is to, well fix it.
To date, this normally is happening in the first 3 lines of text, but not always. Keep an eye on the screen, as you type and be ready with the Backspace key. Mine is getting worn out. Normally, by about the third line, you're OK, but I had one instance tonight, where there were maybe 5 and I was on about line six.
I've noticed that when these happen, the justification icons on the Toolbar often flash, and move slightly. Right now, with no auto line breaks, I see that the justification tools are offset about 2 pixels, from the formatting icons above. I do not know what this means, and it's just observation.
Along with this, the Block Quote function is about 1:3, and sometimes cannot be used, regardless of what the user tries.
Also, the camera icon attachment of an image is dead for many. Lately, others have used it, and have no issues. Maybe this is a rolling "fix," and will one day get to Arizona? My "guess" is that this was fixed in San Jose, and progressed westward. That means that I will be the last, but if it does get fixed, I'll live with that.
Keep the faith, and just keep an eye on the screen, as you type. Hope that there is a real fix coming down the pike.
Good luck,
Hunt
PS - see ya' in the PS forum, if I can stay logged-in as the_wine_snob...

Similar Messages

Truncate text after first line in TextFlow

I have a TextFlow object which is rendered in a Sprite with multiple lines.
For a compact display I now want to display only the first line, followed by 3 dots (...).
I didn't find a good approach so far.

There is some support for truncation. It's limited to label use cases and requires using the TextLine factories. There is no support for editable text with truncation. Example below.
Hope that helps,
Richard
ADOBE SYSTEMS INCORPORATED
Copyright 2011 Adobe Systems Incorporated
All Rights Reserved.
NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source
other than Adobe, then your use, modification, or distribution
of it requires the prior written permission of Adobe.
package
 import flash.display.DisplayObject;
 import flash.display.Sprite;
 import flash.display.StageAlign;
 import flash.display.StageScaleMode;
 import flash.geom.Rectangle;
 import flash.text.StyleSheet;
 import flash.utils.ByteArray;
 import flashx.textLayout.container.ContainerController;
 import flashx.textLayout.conversion.TextConverter;
 import flashx.textLayout.elements.TextFlow;
 import flashx.textLayout.formats.TextLayoutFormat;
 import flashx.textLayout.factory.StringTextLineFactory;
 import flashx.textLayout.factory.TextFlowTextLineFactory;
 import flashx.textLayout.factory.TruncationOptions;
 [SWF(width="500", height="500")]
 public class Truncation extends Sprite
 public function Truncation()
 stage.align = StageAlign.TOP_LEFT;
 stage.scaleMode = StageScaleMode.NO_SCALE;
 // sample of truncation with the StringFactory
 var stringFactory:StringTextLineFactory = new StringTextLineFactory();
 var stringSprite:Sprite = new Sprite();
 stringSprite.x = 25; stringSprite.y = 25; addChild(stringSprite);
 // this bounds has no maximum height
 stringFactory.compositionBounds = new Rectangle(0,0,200,NaN);
 stringFactory.text = "This is an extremely long and overly verbose string of text that I would like to see trunctated.";
 // truncate after two lines
 stringFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,2);
 stringFactory.createTextLines(function (obj:DisplayObject):void { stringSprite.addChild(obj); });
 // sample of truncation with the TextFlowTextLineFactory
 var flowFactory:TextFlowTextLineFactory = new TextFlowTextLineFactory();
 var flowSprite:Sprite = new Sprite();
 flowSprite.x = 25; flowSprite.y = 75; addChild(flowSprite);
 // this bounds has no maximum height
 flowFactory.compositionBounds = new Rectangle(0,0,200,NaN);
 // truncate after three lines with a big red ellipsis
 flowFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,3,TextLayoutFormat.createTextLayoutFormat({ fontSize:24, lineHeight:0, color:0xff0000 }));
 flowFactory.createTextLines(function (obj:DisplayObject):void { flowSprite.addChild(obj); },TextConverter.importToFlow(Data.markup, TextConverter.TEXT_LAYOUT_FORMAT));
class Data
 public static const markup:String = "<TextFlow xmlns='http://ns.adobe.com/textLayout/2008' fontSize='10' textIndent='15' paragraphSpaceAfter='15' paddingTop='4' paddingLeft='4'>" +
 "The following excerpt is from Ethan Brand by Nathaniel Hawthorne." +
 "There are many such lime-kilns in that tract of country, for the purpose of burning the white marble which composes" +
 " a large part of the substance of the hills. Some of them, built years ago, and long deserted, with weeds growing in the vacant round of the interior, which is open to the sky," +
 " and grass and wild-flowers rooting themselves into the chinks of the stones, look already like relics of antiquity, and may yet be overspread with the lichens of centuries to come." +
 " Others, where the lime-burner still feeds his daily and nightlong fire, afford points of interest to the wanderer among the hills, who seats himself on a log of wood or a fragment " +
 "of marble, to hold a chat with the solitary man. It is a lonesome, and, when the character is inclined to thought, may be an intensely thoughtful occupation; as it proved in the case " +
 "of Ethan Brand, who had mused to such strange purpose, in days gone by, while the fire in this very kiln was burning.The man who now watched the fire was of a " +
 "different order, and troubled himself with no thoughts save the very few that were requisite to his business. At frequent intervals, he flung back the clashing weight of the iron door, " +
 "and, turning his face from the insufferable glare, thrust in huge logs of oak, or stirred the immense brands with a long pole. Within the furnace were seen the curling and riotous flames, " +
 "and the burning marble, almost molten with the intensity of heat; while without, the reflection of the fire quivered on the dark intricacy of the surrounding forest, and showed in the " +
 "foreground a bright and ruddy little picture of the hut, the spring beside its door, the athletic and coal-begrimed figure of the lime-burner, and the half-frightened child, shrinking " +
 "into the protection of his father's shadow. And when again the iron door was closed, then reappeared the tender light of the half-full moon, which vainly strove to trace out the " +
 "indistinct shapes of the neighboring mountains; and, in the upper sky, there was a flitting congregation of clouds, still faintly tinged with the rosy sunset, though thus far down " +
 "into the valley the sunshine had vanished long and long ago.</TextFlow>";

Adding extension "line-size 255" to a standard report on the first line

Hi Experts,
i want to modify the statment from Report ztest1 message-id zm to Report ztest1 message-id zm and line-size 255.
I am going to add the extension line-size 255 to the report statement in a standard report. There are no enhancement points near the first line. I have access key available, so i can make the changes to core mod.
The problem is that if i run the report in background, out of the 8 fields, i only see the first 6 columns in the spool. remaining 2 fields are truncated.
The reason for truncation is bcoz the line-size extension is not given to the report. What procedure do i have to follow to add the extension line-size 255?

HI,
You do not need any enhancement for it.
If you have the access key then just add the additon line-size 255 to the repport statement.
Regards,
Ankur Parab

RFFOCA_T: DME with file descriptor in first line (RBC)

Hi All,
I've customized the automatic payment run for a company located at Canada - including generated DME- file by the report RFFOCA_T. The DME file looks good - but sadly the house bank (RBC, Royal Bank of Scotland) is expecting two things different:
"Different formats now exist for the Royal Bank and CIBC from the default CPA-005 specification.
u2022 Type 'A' and 'Cu2019 records have been modified to handle RBC and CIBC
u2022 A parameter was added to job submission to request the bank type
This process has been revised to include two headers as part of the tape_header code segment.
u2022 The first header must be the first line in the file and appear in the following format: $$AAPDCPA1464[PROD]NL$$
u2022 The second header (positions 36 to 1464) must be filled with blanks, not zeros"
(taken from "SCT Banner, Finance, Release Guide - January 2005, Release 7.0")
In our DME-file the second header (position 36 to 1464) is correct, but the first header is completely missing.
RBC wrote me in an email:: "The first line of the file needs the file descriptor ($$AAPDCPA1464[PROD]NL$$). The date format and the client number is correct. When the $$ file descriptor has been added please upload the TEST file":
I could not find any solution at SAP/ OSS - can anybody help, please?
Thanks a lot!
Sandra.

Hi Revi,
I'm not sure if I understand you in the right way.
I do not have a problem only with the $$ at the beginning. The whole first expected line as the file descriptor is missing. As we saw in the report code, it's not considered. At least I hope, there is a simple solution - like an update or else - but maybe we need to enlarge the report itself by a programmer?
Thanks,
Sandra

Arraylist only reading first line of file

I am reading a text file using an arraylist. my file has a single value on each line e.g.
2
3
4
5
however this method is only reading only the first line of each file. is it because of this statement:
String s1[] = number.split("\\s");
I would like to change the method so its not expecting numbers in a single line.. but reads each line and adds it to the collection... how can I do that?
here is getData method that gets the file and processes it.
 public static List<Integer> getData(String Filename) {
 List<Integer> array1 = null;
 // BufferedReader for file reverse.txt
 try {
 array1 = new ArrayList<Integer>();
 BufferedReader bf = new BufferedReader(new FileReader(Filename));
 String number = bf.readLine();
 String s1[] = number.split("\\s");
 for (int i = 0; i < s1.length; i++)
 array1.add(Integer.parseInt(s1));
 } catch (Exception e) {
 e.printStackTrace();
 return array1;

Faissal wrote:
while(bf .ready()){
readline() will return null if the end of the stream has been reached. ([http://java.sun.com/javase/6/docs/api/java/io/BufferedReader.html]). This condition can be used to determine when to stop reading thereby ensuring that all lines have been read.
EDIT:
Here's a code snippet from [Java Developers Almanac|http://www.exampledepot.com/egs/java.io/ReadLinesFromFile.html]: notice how they close() the stream when they're finished with it.

Text node not showing first line?

I'm trying to figure out some unexpected behavior with the layout of Text. If I create an example program based on the API documentation
http://java.sun.com/javafx/1.2/docs/api/javafx.scene.text/javafx.scene.text.Text.html
Like so:
Stage
    title: "Application title"
    width: 500
    height: 500
    scene: Scene
        content: [ Text {font: Font { size: 20 } content: "First row\nSecond row" } ]
}The resulting screen only shows "Second row", the first line is moved out of the screen above. I need to set y to 20 to show the first line.
Is that normal?

Right, Text nodes have an textOrigin, which is default set to the base line. That means that y=0 is just below the letters.
But the behavior is unexpected when simply adding a Text node and nothing is visible.

Anchored objects and first line in InDesign CS3

Hi, thanks for reading. I know that when you want an achored object at the beginning of a text block to all push away ("wrap around") the text, including the first line, you have to put it into a line before that.
What I don't like about it, is that I then have an empty first line and everything else is pushed one line down. Now I could move the whole textbox up, to fit to the rest of my layout, but that's not the way one should work in InDesign. Is there a way to get around the first line?

T-
Select the anchored object and put text wrap on it. Then select the anchored object and go to Object/Anchored Object/Options. Select Position: Inline and set the Y Offset to the negative number that aligns your text where you want it.

Excel upload with header in the first line

Hi ,
I have to upload a Excel sheet with data where the first line will be the Header .
I am using the FM
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 I_LINE_HEADER = 'X'
 I_TAB_RAW_DATA = IT_TAB_RAW_DATA
 I_FILENAME = P_FILE
 TABLES
 I_TAB_CONVERTED_DATA = IT_FS00_C
 EXCEPTIONS
 CONVERSION_FAILED = 1
 OTHERS = 2.
But the data is not getting uploaded in the IT_FS00_c table.
is there any other way to do it.
thanks and regards,
Vikki.

Use the folllowing coding.....
 CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = p_file
 i_begin_col = 1
 i_begin_row = 2
 i_end_col = 7
 i_end_row = 9999
 TABLES
 intern = t_alsm_tab
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 SORT t_alsm_tab BY row col.
 LOOP AT t_alsm_tab INTO r_alsm_tab.
 AT END OF row.
 l_append = 'X'.
 ENDAT.
 IF r_alsm_tab-col = 1.
 r_input_tab-kokrs = r_alsm_tab-value.
 ELSEIF r_alsm_tab-col = 2.
 r_input_tab-bukrs = r_alsm_tab-value.
 ELSEIF r_alsm_tab-col = 3.
 r_input_tab-rprctr = r_alsm_tab-value.
 ELSEIF r_alsm_tab-col = 4.
 r_input_tab-pline = r_alsm_tab-value.
 ELSEIF r_alsm_tab-col = 5.
 r_input_tab-sdatst = r_alsm_tab-value.
 ELSEIF r_alsm_tab-col = 6.
 r_input_tab-sdated = r_alsm_tab-value.
 ELSEIF r_alsm_tab-col = 7.
 r_input_tab-kostl = r_alsm_tab-value.
 ENDIF.
 IF l_append = 'X'.
 APPEND r_input_tab TO t_input_tab.
 CLEAR : l_append , r_input_tab.
 ENDIF.
 ENDLOOP.
ENDIF.

ALV-Need to display total in top/first line!!!

Hi,
i have 3 numerical fields in my ALV output. I need to display the total in top/first line in output and download the same in excel into local system.if possible send me the sample code to how to do it.
Regards,
Nandha.

TABLES : BSEG , BKPF.
TABLES: SSCRFIELDS.
TABLES: ITCPO.
DATA :FLAG TYPE I, MAINTAIN TYPE I,
 FLAG1 TYPE I,
 FLAG2 TYPE I,
 FLAG3 TYPE I.
DATA :BEGIN OF ITAB_BKPF OCCURS 0,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BELNR LIKE BKPF-BELNR,
 BLART LIKE BKPF-BLART,
 BUDAT LIKE BKPF-BUDAT,
END OF ITAB_BKPF.
DATA :BEGIN OF ITAB_BSEG OCCURS 0,
 BUKRS LIKE BSEG-BUKRS,
 GJAHR LIKE BSEG-GJAHR,
 BELNR LIKE BSEG-BELNR,
 BUZEI LIKE BSEG-BUZEI,
 BSCHL LIKE BSEG-BSCHL,
 HKONT LIKE BSEG-HKONT,
 DMBTR LIKE BSEG-DMBTR,
 MWSKZ LIKE BSEG-MWSKZ,
 ZUONR LIKE BSEG-ZUONR,
 KOSTL LIKE BSEG-KOSTL,
 FISTL LIKE BSEG-FISTL,
 FIPOS LIKE BSEG-FIPOS,
 SGTXT LIKE BSEG-SGTXT,
END OF ITAB_BSEG.
DATA BEGIN OF ITAB_BKPF_BSEG OCCURS 0.
INCLUDE STRUCTURE ZBKPF_BSEG.
DATA END OF ITAB_BKPF_BSEG.
*DATA ITAB_BKPF_BSEG LIKE TABLE OF ZITAB_BKPF_BSEG WITH HEADER LINE.
DATA i_print LIKE TABLE OF ITCPO WITH HEADER LINE.
TYPE-POOLS : SLIS , kkblo.
DATA:TEXT2(30) VALUE 'Voucher Print',
 GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
 CT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 WA_SORT TYPE SLIS_SORTINFO_ALV,
 WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
 WA_I_EVENT TYPE SLIS_ALV_EVENT,
 TEMP_CAT TYPE SLIS_FIELDCAT_ALV
DATA : TEXT2538(16) VALUE 'Voucher Printing'.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_BUKRS LIKE BKPF-BUKRS OBLIGATORY.
"Company code
SELECT-OPTIONS : S_BELNR FOR BKPF-BELNR MODIF ID M01.
"Accounting Doc No
PARAMETERS: P_GJAHR LIKE BKPF-GJAHR MODIF ID M02.
"Fiscal year
SELECT-OPTIONS: S_BLART FOR BKPF-BLART MODIF ID M03,
 "Document type
 S_BUDAT FOR BKPF-BUDAT MODIF ID M04.
"Posting date
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
IF S_BELNR IS NOT INITIAL.
 FLAG = 1.
ENDIF.
IF S_BLART IS NOT INITIAL.
 FLAG1 = 1.
ENDIF.
IF P_GJAHR IS NOT INITIAL.
 FLAG2 = 1.
ENDIF.
IF S_BUDAT IS NOT INITIAL.
 FLAG3 = 1.
ENDIF.
SELECT
 BUKRS
 GJAHR
 BELNR
 INTO CORRESPONDING FIELDS OF TABLE ITAB_BKPF
 FROM BKPF
 WHERE BUKRS EQ P_BUKRS
IF SY-SUBRC NE 0.
 MESSAGE E000(ZPROJ).
ENDIF.
IF FLAG NE 0.
 DELETE ITAB_BKPF WHERE
 NOT ( BELNR IN S_BELNR AND GJAHR EQ P_GJAHR )
ENDIF.
IF FLAG1 NE 0.
 DELETE ITAB_BKPF WHERE
 NOT ( BLART IN S_BLART AND BUDAT IN S_BUDAT )
ENDIF.
IF FLAG2 NE 0.
 DELETE ITAB_BKPF WHERE
 NOT ( GJAHR EQ P_GJAHR )
ENDIF.
IF FLAG3 NE 0.
 DELETE ITAB_BKPF WHERE
 NOT ( BUDAT IN S_BUDAT )
ENDIF.
SELECT
 BUKRS
 GJAHR
 BELNR
 BUZEI
 BSCHL
 HKONT
 DMBTR
 MWSKZ
 ZUONR
 KOSTL
 FISTL
 FIPOS
 SGTXT
 FROM BSEG
 INTO TABLE ITAB_BSEG
 FOR ALL ENTRIES IN ITAB_BKPF
 WHERE
 BUKRS EQ P_BUKRS AND
 BELNR EQ ITAB_BKPF-BELNR AND
 GJAHR EQ ITAB_BKPF-GJAHR
LOOP AT ITAB_BKPF.
 LOOP AT ITAB_BSEG WHERE BUKRS EQ ITAB_BKPF-BUKRS AND
 BELNR EQ ITAB_BKPF-BELNR AND
 GJAHR EQ ITAB_BKPF-GJAHR.
 MOVE-CORRESPONDING ITAB_BSEG TO ITAB_BKPF_BSEG.
* MOVE-CORRESPONDING ITAB_BKPF TO ITAB_BKPF_BSEG.
 APPEND ITAB_BKPF_BSEG.
 ENDLOOP.
ENDLOOP.
LOOP AT ITAB_BKPF_BSEG.
ITAB_BKPF_BSEG-ZMENG = ITAB_BKPF_BSEG-DMBTR.
MODIFY ITAB_BKPF_BSEG TRANSPORTING zmeng.
ENDLOOP.
PERFORM CHANGE_CATALOG.
PERFORM ALV_DISPLAY.
FORM CHANGE_CATALOG .
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'BUKRS'.
TEMP_CAT-SELTEXT_L = 'Company Code'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 30.
TEMP_CAT-HOTSPOT = 'X'.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'BELNR'.
TEMP_CAT-SELTEXT_L = 'Document No.'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-HOTSPOT = 'X'.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'GJAHR'.
TEMP_CAT-SELTEXT_L = 'Fiscal Year'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
TEMP_CAT-HOTSPOT = 'X'.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'BUZEI'.
TEMP_CAT-SELTEXT_L = 'Item'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 5.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'BSCHL'.
TEMP_CAT-SELTEXT_L = 'Posting Key'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'HKONT'.
TEMP_CAT-SELTEXT_L = 'Account'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'DMBTR'.
TEMP_CAT-SELTEXT_L = 'Amount'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
TEMP_CAT-DO_SUM = 'X'.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'MWSKZ'.
TEMP_CAT-SELTEXT_L = 'Tax'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'ZUONR'.
TEMP_CAT-SELTEXT_L = 'Assignment'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'KOSTL'.
TEMP_CAT-SELTEXT_L = 'Cost Center'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'FISTL'.
TEMP_CAT-SELTEXT_L = 'Fund Center'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'FIPOS'.
TEMP_CAT-SELTEXT_L = 'Commitment Item'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
CLEAR TEMP_CAT.
TEMP_CAT-FIELDNAME = 'SGTXT'.
TEMP_CAT-SELTEXT_L = 'Text'.
TEMP_CAT-TABNAME = 'ITAB_BKPF_BSEG'.
TEMP_CAT-DDICTXT = 'L'.
TEMP_CAT-OUTPUTLEN = 15.
APPEND TEMP_CAT TO CT_FIELDCAT.
GS_LAYOUT-ZEBRA = 'X'.
GS_LAYOUT-TOTALS_BEFORE_ITEMS = 'X'.
data : text like slis_ev_subtotal_text value 'total'.
gs_layout-subtotals_text = text.
*gs_layout-totals_only = 'X'.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'BUKRS'.
WA_SORT-SPOS = 1.
WA_SORT-UP = 'X'.
*wa_sort-group = '*'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'BELNR'.
WA_SORT-SPOS = 2.
WA_SORT-SUBTOT = 'X'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'GJAHR'.
WA_SORT-SPOS = 3.
WA_SORT-SUBTOT = 'X'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'DMBTR'.
WA_SORT-SPOS = 4.
APPEND WA_SORT TO IT_SORT.
gs_layout-subtotals_text = 'total'.
ENDFORM.
FORM ALV_DISPLAY.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = SY-REPID
* I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
* I_STRUCTURE_NAME =
 IS_LAYOUT = GS_LAYOUT
 IT_FIELDCAT = CT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
 IT_SORT = IT_SORT[]
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
 I_SAVE = 'A'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE 0 = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IR_SALV_LIST_ADAPTER =
* IT_EXCEPT_QINFO =
* I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = ITAB_BKPF_BSEG
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "ALV_DISPLAY
*i_calLback_user_command = 'USER_COMMAND'.
FORM USER_COMMAND
USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
DATA wa LIKE LINE OF ITAB_BKPF_BSEG.
DATA itab LIKE TABLE OF ITAB_BKPF_BSEG WITH HEADER LINE.
READ TABLE ITAB_BKPF_BSEG index SELFIELD-TABINDEX INTO wa.
APPEND ITAB_BKPF_BSEG TO ITAB.
 ENDLOOP.
CALL FUNCTION '/1BCDWB/SF00000204'
* EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS = i_ctrl
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS = i_print
* USER_SETTINGS = 'X'
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
TABLES
 ITAB_BKPF_BSEG = ITAB
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "user_command

Removing first line in text file... Memory and HD concern

Hello all,
I want to remove the first line of a text file. This is easy... One way
to do it, is to find the first "end of line" caracter, strip the string
and re-write the sting in file with the "strip to sreadsheet" VI.
Since the file can be quite large (about 120000 lines), is this a good
way to do it. Will it re-write all the line or just moving the "begin
of file" pointer to the second line? If it re-write the whole file,
this option is not very good since I could have to do this operation
quite often. (I want the file to be a kind of circular buffer / backup).
What do you think is the best way to do this?
Thanks!
Vincent

I think you would have to read in all the data and write it to a new file, you could either keep the data in RAM or simply write to another file then delete the original, and then rename the temp one. So obviously that is a lot of data and memory.
My main question is are you trying to use a text file as a circular buffer? If so can you tell us more about the data, ie is it strings of a constant length? Does a user ever need to read the file or could we head binary?
A solution would be to truly make the file a binary file, so you could actually seek through the file easier, and maybe make the first data chunk the location of the most recent write. The obvious danger is then writing over existing data. This solution is still risky because of the data writes.
You may want to look at some of the other file formats like HWS which maintains a hierarchy of data for you so you can simply add and remove data from it. However, a user will not be able to easily read it.

How to get First line item in Table control for BDC.

Hi,
I have a requirement while creating the return order from the reference Sales order for BOM.
Once I compare the line items and delete the items not to be returned, I want to read the first line item which in fact is header, to make some changes.
How to read this as cursor points to the last line item.
-B S B

Hi Bsb,
What is exactly unclear to you? =POPO will give a popup screen in which you can enter the order position number. This number will then be on the top of the table which means you can refer to it in BDC with "(01)".
Regards,
John.

Copy the data from first line while dynamically adding a new line in table

Hi,
1. There is a table
2. An add button adds a new line to the table using 'AddInstance'
3. A record is entered in the first line
4. When the add button is clicked it adds a new line and along with it copies the data entered in the first line
My question is how to copy the data from the first line and show it in the new line added. This is required so that user can use most of the common values in the first line.
Thanks,
Nikhil

You can use the following Java Script in the Click event of the button.
// Get the number of rows in the table
var nrows = xfa.resolveNodes("page.table.DATA[*]").length;
// Add a new instance(row) to the table
page.table.addInstance.instanceManager(1);
xfa.form.recalculate(1);
// Copy the values from the first line to the newly created row
page.table.DATA\[ nrows \].field1.rawValue = page.table.DATA\[ 0 \].field1.rawValue;
..........field2
..........field3
Thanks,
Chandra Indukuri

FB05 - trans to be processed and first line item PK for doc type

Hi all,
Me quite confused of the entry for the following document type in FB05
DG - cust credit memo
DR - cust invoice
SA- gl acc doc
SB - gl acc posting
KG - vdr credit memo
DZ - customer payment
Need the help to let me know for document type above, what radio button to choose in transaction to be processed and also what posting key use at first line item.
Also if i choose the wrong transaction to be processed radio button, any impact?
thanks
rgds

Document type is primarily used to distinguish different various types of transactions. Ultimately, there are only two effects in accouting - debit and credit. Thus, doc type helps distinguish btw various types of accounting entries. It also controls certain field status while document posting and also drives the number range for the accounting document.
Posting keys determine whether a transaction will be a credit or a debit. They also have an influence over the field status of the document entry screen. Posting keys are broadly divided into those belonging to
Customer                             - Acct type C
Vendors                               - Acct type V
GL                                       - Acct type G
Fixed Assets                        - Acct type A and
Material Mgmt. transactions   - Acct type M
For each account type there are both debit and credit posting keys. You can clik on F4 on the posting key field and see the various entries. You will understand.
Thus, which posting key to enter depends on the transaction you want to enter.
Regards,

Last line item gets changed to first line item for cs01

HI experts,
           I have writen a BDC for Tcode cs01.
I am facing a problem in that.If sucppose there are 4 line items,
the first three line itmes are getting uploaded correctly but the kast line item gets changed to first line item.
below is part of my code.
DELETE ADJACENT DUPLICATES FROM T_MAT COMPARING MATNR.
SORT T_MAT BY MATNR. "HEADER DATA
SORT T_BOM BY MATNR1. "ITEM DATA
*CLEAR : COUNTER, ITEM_NO.
LOOP AT T_MAT INTO W_MAT.
REFRESH GT_BDCDATA.
CLEAR   GW_BDCDATA.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR' W_MAT-MATNR.
                             'lejn44001'.
perform bdc_field       using 'RC29N-WERKS' W_MAT-PLANT.
                             '4600'.
perform bdc_field       using 'RC29N-STLAN' W_MAT-BOM_USAGE.
                             '1'.
*perform bdc_field       using 'RC29N-DATUV'
                             '22.06.2010'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
LOOP AT T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
cnt = cnt + 1.
CONCATENATE '0' CNT INTO VAR.
   ADD 1 TO COUNTER.
   ITEM_NO = 10 * COUNTER.
   OVERLAY ITEM_NO WITH '0000'.
   W_BOM-ITM_NO = ITEM_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-BOM_COMP.
clear new_mark.
CONCATENATE 'RC29P-MENGE(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY.
clear new_mark.
CONCATENATE 'RC29P-POSTP(' VAR ')' INTO NEW_MARK.
perform bdc_field USING new_mark W_BOM-ITM_CAT.
clear new_mark.
clear VAR.
ENDLOOP.
loop at T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR' V_CNT.
                             '0010'.
perform bdc_field       using 'RC29P-IDNRK' W_BOM-BOM_COMP.
                             'PURCHASECOST'.
perform bdc_field       using 'RC29P-MENGE' W_BOM-QTY.
                             '20'.
perform bdc_field       using 'RC29P-MEINS'
                              'M'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
V_CNT = V_CNT + 10.
ENDLOOP.
CLEAR V_CNT.
perform screen_data. " IS ALL ABOUT CALLING TRANSACTION......
ENDLOOP.
following is The input file format m providing.
Material     Plant     BOM usage     Item No     Item Cat     BOM component     QUANTITY
WRJN46106     4600     1     10     z     PURCHASECOST     10
WRJN46106     4600     1     20     z     SOURCINGCOST     15
WRJN46106     4600     1     30     z     INVRESERVE     12
WRJN46106     4600     1     40     Z     INVRESERVE1     20
in this the first 3 line items are coming correctly but the 4th one gets changed to
first line item.
e.g INVRESERVE1 changes to purchasecost.
plz help.
Thanks n regards,
Ashmita singh.

Hi Suneel,
I hardly can't believe that. There must be an mistake by your own in the smartform itself. Would you please share some screens or better, the smartform-XML itself. You can pass out everything else and just share the table and a dataset to try this.
I'm pretty sure that there is something wrong with the settings or even the loop itself. I never faced a problem like that or even heared about such things.
I would love to have a look inside.
Before you share it, create a new one with just the table inside and try it with the same data. Perhaps it is just of to much folders or something like that, so the generating comes in trouble.
Regards
Florian

TEXT_IO ... replace first line

Hello,
i have a small Problem with the TEXT_IO.PUT_LINE builtin
I want to write and read a .txt file with TEXT_IO
It workes fine but if i use put_line to write something in, it replace all inside my .txt file
My Question: Is it possible to replace only the first line inside my txt file
Example Forms:
Declare
     filename           varchar2(30) := 't:\test\Laufzettel.txt';
     file_handle TEXT_IO.FILE_TYPE;
     umrechnung number;
BEGIN
If :parameter.intervall is not null then
     file_handle := TEXT_IO.FOPEN(filename, 'W');
     umrechnung := :button.intervall;
     umrechnung := round(((umrechnung*60)*1000));
     TEXT_IO.PUT_LINE(file_handle,umrechnung);
     TEXT_IO.FCLOSE(file_handle);
end if;
END;
and the .txt file looks like this:
6000
CT
CT2
Mammo
MR
US
Bestrahlung
MRT
NUK
SD
i want to replace the 6000 with another number without rewriting all the other entrys?!
Sorry for my bad English :)
Message was edited by:
user628271

If you are unix use grep command to replace the string. And this grep command can be called using host.
If you are in Windows , create a new file from the original and while creating you
can replace which ever line you needed.
Once you create the new file , delete the original file using host command.
Once you delete the old file, copy the new file to the original file name using host command.
Rajesh Alex

First Line Truncated

Similar Messages

Maybe you are looking for