First page comes out blank

Photosmart 8250 Every time I print after turning the printer on, the first page comes out blank then every thing goes allright. What/how to correct?
Thank you. 

the problem you are facing might be because in first page general attributes you had not defined next page as page 2 ..as you  are saying the desired thing is happening oon pages 2 and 3 but not for 1 and 2
so from this it seems that linking of pages might be missing.
Hope it helps you
RICha

Similar Messages

  • Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

    Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner  works fine.  Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

    Hi Equi_nut,
    Do you have the same printer as the user above? 

  • Canon Pixma 922 - when I copy a document the pages come out blank.

    When I copy a document the pages came out blank.
    Also, when I print an MS-Word document, the pages come out blank, however, if I print an HTML document from a website, the printer prints fine.

    Hi dstei33162,
    Since HTML documents are printing correctly, it is possible that the large black ink tank in the unit may be clogged.  You can print a nozzle check pattern from the printer to see if the inkjet nozzles are dispensing the ink correctly.  To do this, please follow the steps located here.  Once it is printed, please examine it and compare it to a correctly print pattern here.  If all of the colors are not appearing, including the black grid at the top above the colors, performing print head cleanings on the unit may resolve the issue.  To perform the cleanings, please follow the steps located here.  We recommend performing at least one cleaning and two deep cleanings.
    Should you still experience difficulty, the printer may require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • C7280 all-in-one. Suddenly, printed pages come out blank.

    Actsand sounds like it is printing and copying but pages come out blank. No error message on printer or either of the computers connected.

    Hello,
    Please print a Self - Test report.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01448018&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Can you see any of the colors as appear on the report sample?
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have a Canon Pixima MP530, ALL Pages Come out Blank, ink tanks are full!

    I have a Canon Pixima MP530, all ink tanks are full, printer goes through the motions of printing but all pages come out blank. I am using windows 7. all functions seem to work, except no ink comes out it was working perfectly 2 nights ago. I called canon tech support but they have no idea whats going on with it. am thinking maybe the print head is shot? Any suggestions are welcomed, I LOVE this printer and need it to work.

    with that kind of issue it could be the print head oooor it could be the part of the printer that suctions ink into the print head, it's hard to tell. You could take it to a service facility, but it would probably cost you more to repair it to replace it.

  • I have changed cartridges, re-installed drivers, re-started computer. Still pages come out blank

    I have changed cartridges, re-installed drivers, re-started computer, aligned cartridges, cleaned printer head. Still pages come out blank even when just making copies.  What else can I do?

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Print activates but page comes out blank

    I have a Photosmart eStation C510a that I have been using for over two years with no problems.  The problem I have now is that when I send a file to print a page comes out but it is blank like no ink is being disbursed.  I have new ink cartridges installed and they read as full.  Is there a fix or do I need to send for repairs?
    This question was solved.
    View Solution.

    I cleaned the printheads and it fixed the issue for now thanks to the response to another post.  It is great to have a group where you can find potential fixes before having to go for repairs or a replacement.

  • When printing/copying pages come out blank on hp psc 2175

    When I print or copy the printer processes a page like it is printing but the pages are blank.  The ink cartridges are new and the print head (?) goes across the page like it is printing.  The printer is an hp psc 2175 and I am using windows 7.  The last thing I did on this printer before it would not print/copy was to scan several documents using Windows Live Photo Gallery and this scanned correctly.  What can I do to get it to print/copy again?
    Thanks!
    This question was solved.
    View Solution.

    When the printer is not printing black ink and printing out blank sheets ... beware the cartidge sometimes does not insert in proper alignment even though you hear the click. Look closely at the cartridge after you insert it. Make sure it is not slightly tilted. And make sure it is dead center, not further to one side than the other because it will not make proper contact. Also 2 more good suggestions here... http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead/HP-Officejet-6500-Wireless-will-not-print...
    PS- the HP 1210 will print without the color cartridge installed!
    Also it is not that hard to refill cartridges yourself. Look how much ink you get for so cheap... http://www.amazon.com/gp/search?ie=UTF8&tag=ie8search-20&index=blended&linkCode=qs&camp=1789&creativ...
    --ThatPat

  • When I print to pdf on Mac, the first page comes out fine but all the rest are magnified and shifted up and right

    I click File>Print. Whether I open pdf in Preview, save to pdf, or just print, I get this error. The first page is fine, but all the rest are shifted up and to the right and magnified.
    I've never been able to print out a multi-page document on Firefox with my new computer. I can copy/paste the address to Safari (gross) and it prints just fine, either to pdf or to a hard copy.
    Save me from having to use Safari!

    Making sure the fonts were embedded helped some, but it's still hit and miss. Sometimes I'm still missing pieces. One workaround I have found that works is just print one page without security to PDF, and then go back and replace the bad page(s) with them. So it will print properly, just not all the time. I have a copy of a word page and then what acrobat did to it. I just need to figure out how to post it here.
    Kim

  • I try to print a 4 page site at less than 100% the first page comes out right and the others revert to 100%. How can I change this?

    I am working on an iMac, OS10.6.8.
    There is a certain web form that I must fill out regularly. It is long and consists of several pages. I wish to keep either a PDF or printed copy of my completed forms. I change the percentage in Page Setup and when I go to print or make the PDF the pages after page 1 revert to 100% and copy is omitted between pages 1 and 2.

    You may have to crop pages to get the effect that you want. If you have the original, it would probably be easier to edit that and create a new PDF.

  • The first sheet coming out is always blank Also how can I have the pages come out 1-9 instead of

    first page come out blank    I want sheets to come out 1-9  not 9-1

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?  Do you have a separator page selected?  The page order typically may be changed in the Advanced tab of printer preferences, look for a "Page order" selection with an option of "Front to Back" or "Back to Front"
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Deskjet 5740 Printer acts like it's printing, but blank pages come out.

    I have an HP Deskjet 5740 printer. It has worked until recently and now when I try to print it won't out of any applications. It acts like it's printing, but pages come out blank. When I do a test it works or when I try on my work mac it works as well. So I know it's not a printer problem or USB cord. I have tried to reinstall the driver and also to "repair disk permissions," but to no avail. Thanks for your help!

    Take out one of the cartridges and make sure you pulled off the tape covering the head and pin hole. I haven't dealt with Epson printers for a while but I remember buying cartridges for one of my printers that the tape always seemed to peel off leaving the hole plugged.
    If this isn't the problem then it boils down to two things: bad cartridges or printer problems. Different printers are susceptible to two different problems; dried ink in the ink lines and air bubbles. You can try cleaning again and again, using the power cleaning mode if Epson offers that. This wastes ink but you have little choice if you want to resurrect the printer. If this doesn't work try returning the cartridges for a refund and see if that works.
    Three simple rules tend to keep inkjet printer problems at bay: print something at least once a week. This will keep the ink from drying out. When the printer tells you ink has run out get a new cartridge. This will reduce the chances of getting an air bubble in the line. Buy ink only from reputable vendors and don't fill your own.

  • Why does my printer work but the paper comes out blank. ink cartridges are full.

    My printer sounds like it is printing but the paper comes out blank.  The ink cartridges are full.

    What printer model - there are about a dozen HP Photosmart Premium models including the c309a, b, c, g, h and n and the c410a,b,c,d and e. 
    There are a few things to check - I would suggest running up to three cycles of print head cleaning from the front panel or toolbox.   Do copies also come out blank?  Try the steps in this page, starting at about Solution 6.  Does any ink at all print on the test page? 
    For some models there are firmware updates available that are only delivered through the web connection.  Make sure the printer has been connected and perform any updates that are available for the firmware.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Suddenly after years a web page comes up blank

    Suddenly after years a web page comes up blank, I can get the page on my iMac and iPod.

    If you want to keep using adblock, and have the latest 2.6.4 version - check its Options - Customize page hasn't somehow got a rule which might block that site; & if nothing shown, look at Filter Lists & disable all but adblock & easylist.
    Sometimes, uninstalling  then reinstalling it will solve problems - copy any custom filters first, unless they're simple to reset.

  • Web pages come out tiny, I must use control + to view every page. How can I set a defult size for every page I vivit?

    After upgrading to 3.6 all the web pages come out tiny. The text and the pictures. I must use the Ctrl + in order to make the web page fill my screen. What do I have to do to set a default size for every web site I visit?

    ■ Easiest method, if you allow firefox to tabs you used then on restarting I believe it also retains the zoom settings
    * '''Tools -> Options -> General -> Startup = use current pages'''
    ■ There are also extensions that can be used, some allow individual sites to have individual settings. Look at the [http://support.mozilla.com/en-US/questions/772884 this thread] which also discusses related matters.
    ■ The best method if you need the same effest accross all sites is probably changing one of the preferences within the config files, it is discussed in the above linked thread and also in this MozzillaZine article http://kb.mozillazine.org/Layout.css.dpi

Maybe you are looking for