First Page is Blank

Hi All,
I'm new to Oracle Report Builder, i created a report using Grouping on 'Type'. The result is ok but the problem is that i wanted every new 'Type' on new page. So i set the 'Page Break Before' to Yes. The result came out but the first page is blank.. Any help would be appreciated.
Regards,

Hello
U set Page Break Before property to "Yes" .Don't do like that u again set that property to "No".
And u set Maximum recors per page property to 1
so u will get 1 type of records on 1 page.
U set this property of your type field's repeating frame.
Enjoyyyyyyyyyy

Similar Messages

  • PDF document first page is blank when executing in background

    Hi,
    I am creating spool before displyaing report output by using GET_PRINT_PARAMETERS and NEW PAGE PRINT ON option and displaying report header and report final internal table. calling NEW PAGE PRINT OFF
    finally i am sending mail, by using SO_NEW_DOCUMENT_SEND_API1 function module in foreground executing and background execution.
    When we execute in foreground i am recieveing mail and pdf is perfect.
    when we  execute in background i am recieveing mail. But when i opend the pdf document in mail, PDF doucment first page is balnk and second page onwards i am able to see the report output
    why the PDF first page is blank when i execute the same report with same variant in back ground.
    Please help me in this issue.
    Thanks in advance
    Raju

    Hi Raju,
    <li> Call ABAP4_COMMIT_WORK function module after NEW-PAGE PRINT OFF command.
    NEW-PAGE PRINT OFF.
    CALL FUNCTION 'ABAP4_COMMIT_WORK'.
    Thanks
    Venkat.O

  • New page for group headers - the first page is blank

    In the Section Expert, if you set the Group Header #1 to "New Page Before", and there is a Page Header section, the first page will show the Page Header with no further data. The rest of the report does the page breaks correct, that is, a new page every time the grouping changes.
    How do you stop this blank page at the beginning?
    If you assign New Page After in the Group Footer, there is a blank page at the end of the report, which is also annoying. What am I missing?
    Robert

    If you are using "New Page Before" then use the condition by clicking on X+2 corresponds to it and write
    Not OnFirstRecord
    For "New Page After" write
    Not OnLastRecord
    Regards,
    Raghavendra.G

  • First page appears blank when viewing a Crystal Report in the web viewer

    I have seen threads and KB articles regarding this issue but the suggested solutions do not correct the issue. (KB articles [1423482 and 1439109)
    The issue only started after upgrading from CR 2008 runtime to CR 2008 SP4 runtime.
    When the page containing the viewer control first loads, the report pane is completely blank.
    The viewer toolbars appear as expected, and the report can be exported using the Export button on the viewer toolbar without issue.
    Changing the zoom level causes the first page of the report to appear as expected, and reverting the zoom level does not cause the report pane to become blank again.
    Navigating to the next page of the report works and the second page appears as expected. Returning to the first page shows the first page of the report as expected.
    Our application is installed on dozens of servers but this issue only has occurred on a few installations at this time.
    Steps attempted to resolve the issue:
    1. Uninstall CR 2008 SP4 runtime, confirm the CrystalReportViewers12 folders were removed from the folders C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727 and C:\Program Files\Business Objects\Common\4.0, then reinstall CR 2008 SP4 runtime.
    2. Ensure there are no underscores in the server name.
    3. Change the crystalreportsviewers12 Virtual Directory to use the folder C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727\CrystalReportViewers12
    4. Remove and recreate the crystalrep[ortviewers12 Virtual Directory.
    5. Replace the C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727\CrystalReportViewers12 folder from a server that does not exhibit the issue.
    Any new ideas or suggestions? Thanks

    Moving post to .NET SAP Crystal Reports forum
    Hello Scott
    What browser are you using and what is the version of the browser?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • First Page appears blank

    Hey Everyone,
    We have a few people that use Adobe Acrobat 7 Professional at our company, and very recently one person started experiencing a weird issue where they would open a .pdf and the first page would appear blank (as in a grey background like nothing is there). They could then move forward to page 2, then back to 1 and it will display correctly. This has happened with more than one .pdf. I have tried uninstalling and reinstalling the software, but to no avail. The .pdf's are not corrupt, as they open just fine in Adobe Reader, and I can take them to another machine with Acrobat 7 installed and it opens fine there as well. I have looked through the settings in comparison to another machine and they seem to be identical. There must be some setting I'm missing, but I'm not sure where to look. Any help with resolving this problem, or even a simple point in the right direction would be greatly appreciated.

    Hey Paul,
    Thanks for responding. I tried this for the employee, but unfortunately it did not do the trick. One weird thing that I noticed is that it doesn't do the blank page everytime. This also seems to only happen in Acrobat Pro. The Adobe Reader opens the .pdf fine every time. Weird issue huh?

  • Mac Mail A4 print, first page is blank

    Hello,
    I have this funny issue.
    Some emails in Mac Mail when printing to A4 portrait will only show the header on the first page, the next page then has the start of the body of the email.
    If I switch to landscape it is fine, or A5.
    I have experimented with custom paper sizes, A4 being 210 x 297 if I set the page size to 210 x 291 or lower it previews fine.
    Seems Apple Mail does not like page height of higher than 291mm!
    Any ideas anyone?
    Thanks,
    David

    Hi Raju,
    <li> Call ABAP4_COMMIT_WORK function module after NEW-PAGE PRINT OFF command.
    NEW-PAGE PRINT OFF.
    CALL FUNCTION 'ABAP4_COMMIT_WORK'.
    Thanks
    Venkat.O

  • Blank first page and chart printing on the second page

    I have a subreport in my report footer that displays a chart.  The detail section is suppressed in the main report.  For some reason the chart displays on the second page of the report and the first page is blank except for the report header and page footer.  In the section expert the 'new page after' box is checked and grayed out so I can't remove the check to see if that solves the problem.  I've never been particularly skilled in regards to reporting and in addition it's been quite a few months since I've even worked on a report.  I'm using Crystal XI. Can anyone provide suggestions on where I might look to solve this problem.

    Main Report
    Report header--suppress blank section
    Page header --suppress blank section; supress (no drill down) - page number = 1
    Detail--Suppress (no drill down); suppress blank section
    Page Footer--suppress blank section
    Report Footer--suppress blank section
    Sub Report
    Report header a--suppress (no drill down) - {?Pm-?Graph Type}<>"Pareto" ; suppress blank section
    Report Header b - suppress ( no drill down) - {?Pm-?Graph Type}<>"Pareto-Top 5" ; suppress blank section
    Report Header c--Suppress blank section
    Group Header #1a--Suppress (no drill down) - If {?Pm-?Graph Type}="Pareto-Top 5" or {?Pm-?Graph Type}="Pie-Top 5" then
    {@nIncrement}>5
    ) ; Suppress blank section
    Group Header #1b--Suppress ( no drill down) - {?Pm-?Graph Type}="Pareto" or {?Pm-?Graph Type}="Pie" ; Supress blank section
    Detail--Suppress (no drill down); suppress blank section
    Group Footer #1--Suppress (no drill down) ; suppress blank section
    Report Footer--suppress blank section

  • Forms that previously worked, print a blank first page.

    I have numerous forms that were created in LiveCycle Designer 8 that worked perfectly, but suddenly they all are printing a blank first page.  When I am in LiveCycle in the Design view, I am able to print both pages but when I go to the Preview PDF view, the first page is blank on print preview.  I'm stumped. There are no security settings around printing.  Any help would be greatly appreciated.

    This seemed to be a property that is causing an additional page to be printed.. If you can send the form to [email protected] , I can have a look at it..
    Thanks
    Srini

  • First page of PDF is blank

    PDF's that I create look fine in all readers except Adobe Reader for Android where the first page is blank. I can't figure out why though for the life of me. Anyone have an idea why something like this would occur?    

    Thanks Mehwish,
    Do you have any insight into why this occurred and if there's a way to avoid it until you guys get this fixed? Any ETA on the fix? This is a huge issue for us right now and I'm trying to figure out any workaround possible. Thanks.

  • Lately when I do an images search only the first page actually shows the images- the rest show blank squares- why, and how do I fix it?

    Over the last week I have noticed more and more that my searches do not show up properly. Today only the first page of images actually show, the rest are blank spaces, but if I click they go to the image site. The rollover does not show either.
    What can cause this, and how do I fix it? I have tried various safe settings but this has no eefect at all.
    Thanks.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • Ssrs 2008 r2 rectangle causes first page to be blank

    In an SSRS 2008 r2 report I have 6 matrixes that I placed into 1 rectangle so that all the individual items do not float.
    The problem is that the first page of the ssrs 2008 r2 report is blank when the report is executing.
    I have set the report properties to: landscape, custom paper size, width 14" and height = 11". The report properties are width 14 inches and the height is 11 inches. The body properties keep changing to 26.75719 inches and width = 13.54667 inches.
    When I set the border of the rectangle to solid,  I can see the rectangle when the SSRS report is executing. The rectangle appears before any of the matrixes are displayed. However when I look at the rectangle in design mode, the rectangle is around all
    6 of the matrixes.
    Thus could you tell me why the rectangle is displayed in a different location when the report is executing and not around all the matrixes at that point?
    If there is no property that can be set, then should I have more than one rectangle? To place the objects into separate rectangles, I want to mention that that there is a header matrix and a summary rectangle that need to be shared. Matrix #2 and Matrix #3
    are for students in grades 01 to 08. Matrix #4 and #5 are for students in grades 09 to 12.
    Can you tell me what I can do so that I do not have a blank first page when the SSRS 2008 R2 report is executing?

    Hi wendy,
    If we want to use a rectangle as a container for other items, we should drag them into the rectangle. When we move the rectangle, the items that are contained within the rectangle move along with it. An item within the rectangle shows the name
    of the rectangle in its Parent property.
    For more information about using a rectangle as a container, please see:
    Add a Rectangle or Container (Report Builder and SSRS)
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Unwanted Blank Page When Table At Bottom of First Page

    I have an RTF template which has a table with the typical for loop as the row generator and a totals row after that. There are no line breaks after the table, and the table's paragraph is set to single line spacing with 0 pt spacing before and after.
    When the table reaches the bottom of the first page, but does NOT go onto the next page, there is a blank page at the end of the report. Any ideas on how to eliminate this?
    Thanks in advance,
    Kurz

    I have an rtf template which is used to print output in pdf format. I have a table which has many rows which displays data for each record. In order to avoid breaking the page in between the rows of a record , i have added an outer table with single row and column and pasted the data table inside it and changed the row property of outer table to 'Allow Rows to Break Across Pages' to unchecked. It works fine only if the first record set length does not exceed a full page. IF the first record expanded to more than one page, it leaves a blank page at the very first and start the record at the second page. Can you please advise how to solve this issue. Its very URGENT please..

  • Any solution to why the first page of secure document will print, but is blank?

    Title page of a secured document is printing out blank.  The page has stamps on it and is clearly visible during the print preview before print.  Second and subsequent pages print fine.
    Unsure if some setting has been unchecked that skips printing the first page or some unknown error.
    Any help would be apprecaited.  Thanks.

    Hi Shabeaut,
    According to your description, my understanding is that you want to change the template of the root site without creating the susites in another web application.
    I recommend to export all the existing subsites and import them to new web application.
    More references:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc7c11ec-e4da-4ddb-babd-db76ccb35664/move-subsite-to-new-site-collection?forum=sharepointadminprevious
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd321bac-16a7-47e4-842e-00b7ca0f7f05/move-subsite-to-other-site-collection-as-subsite?forum=sharepointadminprevious
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Customer Invoicing Printing First page line items blank

    Hi Everybody,
    Customer Invoicing Printing First page line items blank and it is printing it from the second page.  Please help me on this.
    Regards,
    Md Ziauddin.

    item No    Material No   Descripition  Putaway Bin   SUT  Vendor Batch  LE QTY  COA   Base UOM
    this how my line item should like, i am able to print only single line item for each item no.
    if i have 5 pallets for single line item, i want the same line item to be printed 5 times and this is what i am looking at

  • Blank First Page in Sub Report

    Hi,
    My sub report display the first page blank with data starting from the second page. The first page just displays the Report Header. How can I fix this?
    Thanks.
    Reena

    Is it possible that there is a group in the subreport and you have Keep Group Together set in the Group Options?
    Fuskie
    Who would bet the group data is larger than what fits on a single page and Crystal reacts to that by pushing the whole thing to the second page...

Maybe you are looking for