First page to display on Book open

Hi
Hopefully not too dumb a question but what determines the first page that a book opens on?
Mine always seem open on Chapter 1, Section 1 - which I'd like to change
Thanks

I fully expected the book to open where it had last been closed - but for some reason its opening on chapter one.
my question was raised because if thats not the default action, I'd like to override or set my own default.

Similar Messages

Adobe form only first page is displayed

hi all,
I have created two pages under the Master page but only the First page is getting displayed. Both are set to visible. Whatelse could be the reason. Thanks.
Regards,
FS

Hi,
Can you please elaborate more on this. Have you added 2 body pages or 2 master pages?
If you have added 2 body pages and if they are empty then they wont get displayed. You will have to insert a subform into the page. Only then you would be able to see the extra two pages.
Thanks,
Radhika

How do I force more frequent automatic refreshing of the page content displayed on my open tabs?

I always have a tab open displaying the Engadget homepage. New posts are added to this page every hour or so but I don't usually see them until I force a page refresh myself.

Try:
*ReloadEvery: https://addons.mozilla.org/firefox/addon/115

CR 9.2.3.1699: Subreports first page will displayed 2 times

Hi everbody,
i have a problem with Crystal Reports 9.
I have make a report with 5 subreports in his reports footer section.
The subreports groups data on years. Means they show information for 2008,2009 ... and so on, on a single page.
My problem is that this works perfect if i preview the subreports from itselfs.
If i start the preview from the mainreport the site with the first year 2008 will shown two times and after that all other years in correct order.
I have checked every Options and try different constalations on Keep Together an NEW PAGE Before or After. Nothing helps.
Now i'm sad and looking for inspiration and idea to solve this problem.
May someone has this problem in the past and can help me.
Thx to you
Jan

I have insert a Subreport with insert a report on file. The format options On-demand Supreport, Re-import when loading and suppress Blank-Subreports are disabled. The Main Report Footer are split in serparate sections.
Look at the screenshot here you see the main footer an the subreport footer how makes the problem. And you can see the subreport option of it.
Hopes it will help.
THX
[screenshots|http://www.schebeko.de/images/18.02_cr_formate.png]

How to make first page to display when running the project

hi friends,
as i am new this development in webdynpro, i am getting lot of support from the forum. i am thankfull them all.
now i am having many views in my project and i am navigating from one another. if i want to make one particular view as first view to be displayed when i am runnning the project.

hi,
If u have more than one view.To define a view as a start view, you must create an outbound plug for this view.
note:For Create Outbound Plug or Create Inbound Plug. In
the work area of the Navigation Modeler, click once on the view for which you want to create the plug. It is irrelevant whether you start by defining an outbound plug for the start view or creating an inbound plug for the subsequent view.
regards,
Arun

Have a gap in detail of first page and not display group footer on each pag

Please help me about Memo field in SubReport in CrystalReportXI. I have a SubReport that need to display pageheader, detail, page footer, and in detail of subreport contains memo field and set the property of this text box to "Can Grow" = Yes .However, CrystalReportX does not support to display pageheader, pagefooter in SubReport. So. I have created a formular FakePageHeader that has code as
"WhileReadingRecords;
true"
and group in this field and checked option repeat group header on each page and right click Section Expert->check print at Bottom of page for Group Footer.
This problem is when I preview Subreport. It display text in group header and a gap in detail of first page and view next page, the subreport display right data of memo field. But the report still not display group footer on each page.
How do I can remove a gap in first page and display group footer on each page?
Thanks

in subreport in format for the memo field uncheck keep object together.
You can not force group footers to repeat on each page.
I have not tried this but you might be able to capture the data you want to show in SR page footer and display in main report page footer, using shared variables.
Ian

When I open Firefox, it goes to the first page and then stops, saying "Not Responding" with the cursor spinning. What can I do to fix this? Thanks for any help

When I open Firefox, it goes to the first page I open, but then stops and says "Not Responding" with the mouse cursor spinning. I hit the close button and it says Windows is searching for a solution (which doesn't come).
When I open Firefox again, it says:
Well, this is embarrassing.
Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
You can try:
Removing one or more tabs that you think may be causing the problem
Starting an entirely new browsing session
Any ideas? I gretly appreciate any help. Thanks!!

What is that first page?
Can't you open any web pages in Firefox?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Report Painter. Form edited only display first page.

Hi All,
I have add on new column on my report painter and now the display is more than one page.
There is warning "Only the first page is displayed in the report" whenever i execute to make modification using T-code : FMEO.
There is ">" ">|" button appear on top when i run using FMEO.
But , when i try to run the form from its T-code. The report only shows the first page column.
The second page is not showing, and there is no button ">" to browse to next page as well.
Just wanna know, is there anyway i could fit 2 pages into 1 page or is there any setting that i could enable so the user could browse to second page on the form?
Thanks.

Hi..,
Onli on First page means ... this node will get executed on the first page irrespective of the page name i.e it considers onli &page& eq 1...
Suppose u have ur fist page i.e MY_FIRST_PAGE.. and in this page the data in the main window may trigger the same page as second page .. i.e if the data in the main window is not sufficient to fit in the first page it triggers the next page i.e MY_FIRST_PAGE as second page ...
so this MY_FIRST_PAGE may extend to the second page also right !! so when u use on page MY_FIRST_PAGE.. this node will get triggered if this page extends to more than one page also..
Hope u understood....
regards,
sai ramesh

How to open more than first page of template in Pages 09?

When I am in the template chooser under newsletters, I would like to use the 6th page of the non-profit newsletter (the one with the front page that says "Redwoods") but when I choose that template, the only thing that opens is the first page. It won't open the subsequent 8 pages as part of the template. Is there a shortcut I'm missing here? Does someone know how to do this. Thanks.

Hi rthrash3
Pages uses what are effectively page templates within documents.
To get to these go to the Toolbar and select the Pages icon.
The whole process is explained in detail here:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

Preview only shows first page of TIF files

Hello,
I am having problems with Preview version 3.0.9 (409). When opening a multi-page TIF file, only the first page is displayed. The "page down" button does allow to jump to the following pages. (I am able to view the whole document with other programs). Is this a bug in the program or am I doing something wrong?
Thanks!

HI Fidelio,
I'm not sure if this is a corrupted Preview preference file or not but it can't hurt a thing to try.
Locate this file: com.apple.preview.plist It's here: /Home/Library/Preferences. Open the Preferences folder, locate that file and drag it to the Trash, empty the Trash and reboot. Your Mac will create a new pref file for you.
Carolyn

When I open Firefox, it loads the page or tabs that were open when I closed it. I have set my homepage and asked FF to open with this and it used to until I upgraded to FF4

Well I think the question pretty much says it. I have search the web and it seems most people want it to do this.
I have even looked in about:config to see if something is set to save my old pages.

What is that first page?
Can't you open any web pages in Firefox?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Blank First Page in Sub Report

Hi,
My sub report display the first page blank with data starting from the second page. The first page just displays the Report Header. How can I fix this?
Thanks.
Reena

Is it possible that there is a group in the subreport and you have Keep Group Together set in the Group Options?
Fuskie
Who would bet the group data is larger than what fits on a single page and Crystal reacts to that by pushing the whole thing to the second page...

Blank first page on DHTML viewer in Crystal 2008

I have seen some threads regarding this issue but no real resolution.
We are using Crystal 2008 running in a Windows 2003 web server and IIS 6. With the base version of Crystal 2008 installed, everything worked fine when rendering reports in the DHTML viewer. As soon as we upgraded to Crystal 2008 SP2, all reports now show a blank first page.
If you page back and forth or do an export, the data on the first page are displayed.
Does anyone have any ideas what caused this and how to fix it other than uninstalling the service packs?

Let's back up a bit. How did you actually deploy the Crystal Reports 2008 .NET Runtime to your web server? Based on your last message it sounds like you use the original CD media? If so this is incorrect.
You mentioned you copied the crv.js from a cab file from the install media. This might account for your problems because you are using an old of out date .js file with newer engine components.
The way I always suggest to deploy to a web server is to use our server redist files. Below are a few of the files you could use. I've listed FP3.3, SP 3 and SP 2. I don't know what patch level you want to be at so the decision is up to you.
Service Pack 3, Fix Pack 3.3 Server Redist
https://smpdl.sap-ag.de/~sapidp/012002523100016807202010E/cr2008fp33_redist.zip
Service Pack 3 Server Redist
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
Service Pack 2 Server Redist
https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip

Unable to hide the first page in the form

Hi ,
I am trying to design a dynamic form that has three pages. The form is being used in a LiveCycle process and during the process initiation, only the second page should be visible and the first and third pages should be hidden. I am trying to hide the first and the third pages using JavaScript. I noticed that the third page is being hidden but the first page gets displayed as an empty page. Based on this behavior here are couple of questions I need guidance with
Can we hide the first page within a form? If so why am I seeing this inconsistent behavior when hiding the first and third pages?
If the first page can not be hidden then is there a workaround to achieve my goal of re-arranging the pages so that I can add content to the first page dynamically and shift the previous content on the first page to the second page?
Any suggestions will be appreciated.
Thanks,
Samanthapudi

Hi,
You've originally said.
in the first page i don't want data in main window...
yet using a command node to trigger the next page means you have to include a (presumably) empty main window in the first page.
Your main window has to contain some output (a table usually) and it's contents are the same on every page (only it's height can change). So, you can't have a blank main window on page 1 and a main window with data on pages 2 and 3.
Remove the main window from page 1, set page2 as the next page for page 1.
As for how to trigger page 3 you'll need to provide more detail on what the condition is. Do you want multiple copies of page 2 to hold all of the main window data, or just one? Do you want one copy of page 2 then the rest of the data on multiple copies of page 3. Be specific.
Regards,
Nick

Only shows first page after interactive sort.

We've developed a number of reports on Reporting Services 2005. These are going to be displayed to the users via a browser embedded in an application using the standard ReportServer URLs, with the toolbar and parameters hidden. Parameters are passed via
the URL.
As there is no toolbar, for multi-page reports pages are displayed below each other, with a gap and the header row (column names) repeated. This is how we want it to be. The problem comes if you add an interactive sort to a column. It displays fine initially
with the pages below one another as before, but when you click the interactive sort only the first page is displayed and there is no way to access the subsequent pages as the toolbar is hidden and they're not displayed below as we want them to be. Is there
any way around this?

Hi Andy_Cap,
Thanks for your question.
According to your description, it seems like for different pages of one specified report, you using one WebBrowser control in your application,
the WebBrowser’s URL is one report’s standard URL in ReportServer, you had hidden the toolbar and parameters of the report, so you passed the parameters via URL. Although you had added interactive sort to the report, when clicked on the column,
just the first page changed, the other pages have no effect, right? If I misunderstand your question, please let me know.
Based on previous understanding, I had tried to reproduce the scenario on my local computer, it works fine. My approach is
setting the report’s InteractiveSize is 0, thus all of the data will being displayed in one webpage and the Interactive sort has effect.
1. Double-click the report in the Solution Explore, select Report in the Properties window.
2. Locate to the property of InteractiveSize, expand it, set the Width’s value is 0cm.
Hope it help you. If there is anything unclear, please feel free let me know.
Thanks,
Sharp Wang
Please remember to mark the replies as answers if they help you and unmark them if they provide no help.

First page to display on Book open

Similar Messages

Maybe you are looking for