First post in this great new forum!

Enjoy your fast new cat folks!
Scott

**I'm LUVIN' it!!* Just upgraded my 2007 Macbook from Tiger to Leopard then - Erase - Full Install Snow Leopard. Everything works great!! Super fast on my Macbook! Even though I had a full authentic Leopard OS disk I never did install it on my Macbook until I got Snow Leopard today. I tried Leopard on other computers and found it was too bloated and awkward so never installed it on my Macbook.
But SNOW LEOPARD.....?
Smooth install and no problems at all.
AWESOME! FAST BOTH ON AND OFF INTERNET! WHAT A DIFFERENCE! FANTASTIC! VERY HAPPY!

Similar Messages

Here my first posting to Lombar's only forum

Recently I posted a warning and my post flew away so many could not see it.
Here are anothers users talking about the same thing:
http://discussions.apple.com/thread.jspa?threadID=888049&tstart=0
I hope this will help my fellow Lombard users.
no name (invisible) je.je.je.............
ps:
Powerbook using 10.4.6 boosting on a second try with no problems for a week+and sleeping with no problem and wakeup like a sun.
And my iMac have it allready no problem with mail and skype that all I use it for My mac mini never will see 10.4.9.
macMini1.66GHzCoreDuo-OSX-XP,"Lombard"10.4.8 -iMac Dalmata en Español. Mac OS X (10.4.8) A "Free man" with no tie with the bad.
macMini1.66GHzCoreDuo-OSX-XP,"Lombard"10.4.8 -iMac Dalmata en Español. Mac OS X (10.4.8) A "Free man" with no tie with the bad.

I am looking for 10.3 disc I've been told that it will work on this laptop with no problem, maybe it is 10.2 that is the problem. Anyway I will keep trying as I have a limited income.

Is this a new forum wonkiness or perhaps my G5?

I posted a message in the iPhone forum earlier, but when I went to that particular discussion, there were THREE copies of the message. Any idea as to what might have caused that? The only thing I can think of is that when I clicked to post the message, my G5 may have squirted out a triple click.

Clicking the button three times may cause up to three copies of a message to be created, depending on how fast the Internet is responding to requests and how much time elapsed between each click. You cannot delete your own messages.
(23618)

This is my first post and facing a big issue as a BASIS professional-

Hello all,
I have been recently bugged by a serious problem and that is *how to see or get the list of all the transactions executed by an user, at a particular date. I have tried SM21 and STAD but not getting the results as per as the expectations.
Furthermore, STAD is not fetching any data for any user at that system. Well, I have tried SUIM also but to no avail. My system is ECC 6.0.
This is my first post to this community and it would be of great help if my problem is solved.

Hi,
Please find the below links for SM19 and also if you search by Sm19 or security audit log there lot of information in SDN and help.sap.com or google.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c7/69bcb7f36611d3a6510000e835363f/frameset.htm
SM19 Dynamic Configuration.
Thanks & Regards,
Sharath

Illustrator help - first post....

Hi,
First post on this forum although I've benefited much from the Dreamweaver forum over the past 12 months.
I've been in the process of re-training and have now got around to Illustrator CS5 classroom in a book course this past week and I now find myself asking a couple of questions. The main question is as follows:
1) Is there a book that would come very highly recommended along the lines of 100 things you can/should do with illustrator in the real world of web design?
I'm mainly focussing on web design and will most likely be using Illustrator (as skills allow!) to create images/backgrounds/logos for use in sites that I build. My challenge is that I'm not "arty" really at all so would hugley benefit from something that I can use as a reference guide for logos, images making etc. I have similar for CSS, HTML & J-Query and hope the same exists for AI.
Sorry it's a very basic question but I really want to set off in the correct direction.
Many thanks.
Regards
Rob

Agreed but I would like to cover off some of my own
Design work going forward to I'm going to push on with learning some more design fundamentals.
My challenge with art school is I've also just moved to France and learning the language as well challenges all round!
Thanks for getting back to me.
Cheers
Rob
Sent from my iPhone

This is my first post. I would like to thank you all for all of the information you have posted on this forum. It has been most helpful to a Newbee. I have a MBP17 w/trackpad and click bar from '08. I need a bigger HD, how big can I go? THX

This is my first post, but I have been following this forum for a while and you have all been very helpful in my MacEducation. I have a MBP17 10.6.8 w/6GB ram from '08. I need to upgrade my HD from 200GB. I would like to go as big as I can and would appreciate any experiance you've had. Could I go 750GB or 500 GB @ 7200 rpm. Should I upgrade to Lion before I swap the drive out? Thanks, Johnny

Hi Johnny,
Yes you can do the 750 or 500, 5400 or 7200. Just make sure it is 2.5" SATA and 12.5mm high or less (there is at least one HD out there that is 15mm high and will not work).
Lion: I don't know that it matters much either way, just don't do them at the same time. That way, if there are issues, you have a much better chance of troubleshooting one major change instead of two.

Please make this a good experiance for my first post on any board. READ ME

Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago)
So after a while of hearing about MAC's I decided to start small and get an iPod (since they are so popular here in NYC) and see what apple was about. Well I really saw that Apple had a great product and started asking about their computers. And did plenty of research. And before the new Intel Macs came out, I was going to get a powerbook. But I had a feeling a new laptop was coming out and waited a lil while and sure enough. The Macbook Pro came out. So I went out and did all my research (as to this being the first real purchase of a Apple product and knew about the possible implications of a new first gen Intel chip in a apple product litterally making history) I knew I might become a new beta tester.
So I started looking on these boards and did 2 weeks worth of hard research to see if the Mac Book Pro (MBP) was for me. And after all the problems i saw (ex: The whine, Right speaker distortion, heat coming from it, white line at bottom of screen, etc) I never saw or read anything about AOL connectivity problems. And I know, I know... alot of you are probably going to gripe and complain about AOL sucking and yada yada yada, but please. Cut me some slack. I actually like AOL. I got on it back in 92 when it came out, and really enjoyed it. And have been on it since. I like chatting on there, and so forth. And I hope you help with my problem instead of telling me to go get "a real ISP" I do have a real ISP, but I like my AOL too.
So now to my problem....
I have a Sony Viao 1.8ghz PC with 512 ram, 80 gig hard drive, 10/100 ethernet port. Connected to a Belkin Router (more info below on specs of router) connected to Opt Online Broadband Cable internet with VoIP. I use my macbook pro on the wireless network at my home.
I got a mac book pro 1.83 ghz running 512 ram on Tiger OSX 10.4.6 I thought that I would wait till a connectivity patch (which I thought would have been 10.4.6) fix the airport problems came out till I posted something. But now that I've tried everything, I'm hoping you open this thread and help me and possibly someone else out there as well. I just d/l'd and installed the 10.4.6 update last night and it did'nt help. So here's more info on my specs. I have a belkin router wireless G 2.4 ghz 54mbs router and I have configured the router with it's firewall, wap2 encryption (as it's the only selection the router has that is available that matches what airport comes with in encryption) I hid my network, and have tried to upgrade the firmware on the router.
Now Here's the real problem. I can connect to AOL on my MBP when I connect the actual ethernet cable to the MBP's Ethernet port (after I have let the cable modem do a hard reset to configure itself to a mac) I can connect to AOL. But when I disconnect the cable and return it to it's normal config, I can't connect to AOL. I can connect to the internet via safari, and firefox, and even AOL's IM on iChat. I can use Itunes all kinds of things. I can even play warcraft 3 wirelessly on battlenet. But connecting to AOL is a pain in the @$$. It's the only proggy I have that won't allow it to connect. I keep getting the error message "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." Of course All i see for a while is the spinning black and white circle. And it goes through step 1 and 2, goes straight to 6. Then it goes blank, and BAM! That message pops up. And what's so frustrating is that I've tried every possible configuration on AOL, my router and even system preferences, for it to let connect. I even went into system preferences on the mac and went down the the Internet & Network "Sharing" icon and tried 100 possible combinations on that in the services tab, and firewall tab. I've turned them on, off, tried to make exceptions ETC. And no matter how much I play with the personal file sharing and windows sharing advanced settings and sigh every possible combination to make AOL connect via wirelessly. And nothing. I then even tried to fix the connection under AOL in setup. I've gone through and selected TCP Script, Airport Script. Cable Script, And practically every script I can think of. And nothing. I even went on to AOL and downloaded thier alleged fix to wireless accessing AOL. And nothing. I've been searching all over google, AOL's website, and all over these discussion boards and no mention of anyone even having the same problem. But please, someone out there with their infinit knowledge of how Macs run and having more experience than me, Please make this a good experiance for my first post on any board anywhere reguarding a mac. A MBP at that too.
An update to this, But amazingly enough, I actually got it to connect to AOL wirelessly for the first time yest. But I have no Idea how i did it. I tried for 3 hours to reproduce it and no luck. I was accessing my router at it's website config screen and somehow I clicked on connect to AOL and while it was trying to connect to it, i reset the router and BAM, it connected to AOL. And I was in shock. I thought I solved it. Somewhere while it was reseting the router it connected and stayed connected to AOL till I signed off and tried to sign back on to see if I could now connect, and guess what. The same dumb message keeps popping up "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." And all I did was sign off to test it, thinking I had fixed the problem. I tried for 3 hours like I stated above, and BAM got it connected to AOL wirelessly again (somehow while the router was resetting). And thinking I fixed it, or figured out the trick to getting it to work, signed off... I kissed aol goodbye again. And have been unable to reproduce the "glitch". SIGH Can someone out there please help me?
I think I've made this message as detailed as possible, but please, can someone give me some constructive criticism on how to fix my AOL wireless connectivity problems. Do you know if it's my router? My MBP? AOL software? BTW, I got AOL software version 10.3.7 (Rev 4136.310 US) The latest version I D/L'ed from the AOL website. Anyone know If I should turn on or off some things such as personal fire sharing on, or firewall off or on? ANYTHING. Please. I've put alot of time into writing this post and making it as detailed as possible. And been having this problem for the past 3 weeks that I've had my MBP, and have waited long enough to use my AOL. If you need any further information or suggestions on making AOL work, please let me know. Thank you for taking the time to read all of this, and I really appreciate all of you in the time you take in responding back in trying to help me. I'll be monitoring this post almost hourly. So I hope someone out there can help. Thanks so much again. And help me make this transition to Mac a pleasant one knowing that there is a mac community out there willing to help a new mac client. Again, Many thanks
In Heath and Wealth,
Bruce
Mac Book Pro 1.83 GHZ 512 Ram Mac OS X (10.4.5)

I FIXED IT!
FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
Bruce

First post, looking for new Demand5 eps

Hello forum
As stated first post so keeping it simple. Where is the last Walking Dead episode (25/08) on Demand5 in Catch Up section. It has regularly been accessable by 12pm Monday since season 3 aired but no sign of it today.
I noticed the new Once apon a time and The Barrior are on and wondered if someone had forgotton to update it.
Hangnail

Don't normally add to my own posts without reply but wanted to update.
I see that channel 5 has replaced the Monday repeat with Under the Dome. Can anyone at BT confirm that this precludes them from showing The Walking Dead.
Any information, even a head scratch would be something at this point. Thank you

NEW FORUM DESIGN: Post Feedback Here

Posting everything in one place will allow Comcast to better monitor what feedback is given.

andyross Member Since: ‎10-17-2003 Posts: 3,647 HORRIBLE Forum updateShare Topic Options Subscribe to this discussion Are you deliberately trying to make the forums so hideous that nobody will use them? The subject text is so tiny, I can barely see it, plus it's virtually impossible to see the difference between read and unread. The subject listings have a huge amount of wasted space between them. You could double the number of on-screen lists (or shorten the scrolling) if you cut it down. There used to be a link on the right that would take me back to the Bookmarks page (what I use as a home page for these forums.) No easy way to get back there that I can see, other than directly from my browser bookmark. At least the text entry seems to properly work with Firefox. Posted on :‎03-09-2015 05:22 PM Kudos 0ReplyFollow Options ResponsesReply Posted byWelcome_to_Post Member Since: ‎07-02-2003 Posts: 5,381 *sigh* Happens every. Single. Time. They downgrade upgrade the forum software. Too bad no one listens to us. Posted on :‎03-09-2015 05:26 PM Kudos 0Reply Options Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621 One not-so-wise new "feature" is that when a topic is more than one page long the FIRST post of the topic is now at the TOP of each topic page. If that post is long that is just some extra scrolling to do in order to get through it and to the replies.And if you are at the bottom of the page and scroll back to the top you gotta get past the first long post on your way back up the page. There is no clear demarcation between posts. Posts are no longer numbered. About the only things that are good are that the toolbar features when replying now work with SeaMonkey and Firefox and other browsers AND the default font size seen when composing a reply is big enough to easily see instead of being teeny tiny as it was before. Yippee!!! No more nose prints on the screen when trying to see what I was composing.
Comcast employees must be authorized to post in the forum in an official capacity. Employees posting here have their names in red and are designated as employees. Names not in red are customers. This is done to protect customers and for assurance that they are dealing with a Comcast employee.
Non-Authorized Employees are allowed to post but cannot state they are employees nor can they allude to being employees. Posted on :‎03-09-2015 06:40 PM Kudos 0ReplyFollow Options Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621 Do me a favor. Repost this here http://forums.comcast.com/t5/Xfinity-com-Website/NEW-FORUM-DESIGN-Post-Feedback-Here/td-p/2490433 After you do that, I will lock this topic. To anyone else who wants to post feedback do so in the topic I linked to.

Thanks Adobe! I LOVE this new forum software!

As someone who belongs to many, many forums over the years, I've gone through a lot of forum software changes. Generally, the vocal majority raise heck about it, but eventually things settle down and people go about their regular forum use with little effort.
These new forums are so much "easier on the eyes" than the mind-numbing sea of text we currently have. Some like the new colors, some hate it. Some like avatars & signatures, and some don't. But the reason you come here is for the information, and this new software WILL make it easier to find what you're looking for.
Macworld.com switched to this very same software last year. They had an obscenely large user base, all of which voiced their opinions repeatedly, to the point where many simply stopped visiting until the switchover was complete. In general, those that don't like change tend to voice their opinions the loudest. The vast majority though, tend to keep quiet and roll with changes. Today, Macworld's forums are running just fine, offer a plethora of new features, and are more active than they ever were previously.
I have no heavy interest in what Adobe does with these forums because I rarely visit the current ones - mostly because I find them absolutely unreadable. But I'm also betting I'll be using them a whole lot more once this switchover is complete. In fact, I KNOW I will.
Rather than complaining about change in general, colors, icons, avatars, signatures, bloated code, or whatever silly reason some are coming up with, time would be better spent simply helping to find bugs with what is there. Once the bugs are worked out, Adobe will most likely start looking at "fine-tuning" the look & feel.

> What I have noticed is that there is a totally different set of aesthetic values being exhibited here between the Users of the Adobe Professional Graphic Arts applications (Photoshop, Illustrator and InDesign) and the people who are almost entirely geared to AV or to web site work and the use of the formerly Macromedia products (such as Dreamweaver).
Ann, you may be correct. But if functionality is truly the most important feature of Adobe Forums, the WebX format falls dramatically short for my own applications:
WebX screws any code or script posted, generally making it unusable. For this reason, the Script and Expression areas of the After Effects forum are virtually non-existent. Users go to other places to discuss these features, because it's not practical to do so on the current forums.
A picture tells a thousand words. When new users come to the WebX forums and want to post a screen grab of their problem project, it's embarrassing to tell them they need to use an external image host to do so.
Video tells ten thousand words. The ability to easily embed YouTube and other online video content into a post is not just a great convenience, it's a way to teach, inform and demonstrate within the forum, rather than sending users somewhere else mid-discussion.
I share a number of your criticisms about the Jive Forums, but for me and the community which uses my frequented forums, the Jive system also offers features which are essential for productive use. As I suspect the new system, like the old, will evolve over time, I'm happy to embrace the positives of the change, and hope that any major problems can be resolved in time.

How to attach files to the thread we post in this forum?

How to attach files to the thread we post in this forum?
I’m wondering why there is no feature that allows attaching files from our hard drives! It is not practical to upload our file first in a certain web to provide it as a link in the post.
Is there a way to attach our files directly from our hard drive to the post?
Please, have a look on the screenshot below that shows a forum which includes all the very basic features!
Thank you for the help
Best
Jamal

Pierre,
Just a guess on my part, but I would suspect non-image files in this case.
As Ted points out, that WAS possible early on, and then the capbility to attach non-image files, was actually retained by a certain few forums, though not for long. This change was coincidental with a major spam attack, and at least one disgruntled user attempting to attach some rather nasty "stuff." I do ot know if those events prompted the change, as I was not part of the decision making group, that initiated the change.
Though 95% of the files that I wish to attach, ARE image files, there are times, where a TXT file would be ideal, say for a crash log, or similar. Now, I can convert that TXT to a PNG, but then one has to work with pixel x pixel dimensions, and some files, like those crash logs, can be rather long.
Personally, I find the loss of the Attach File (was via a button at the bottom-left of the editing screen) to be a sad comment on the actions of some, on these forums, but then that just reflects life outside of the forums.
Hunt
PS - I am glad that you found that little article useful Especially in the PS, PrPro, PrE and Encore forums, screen-caps can tell so very much about what is going on with a person's program, system or their Projects/Images.

Please post in the busier new cross-platform Bridge forum...

... as this forum will be closing down soon.
The new Bridge forum:
http://forums.adobe.com/community/bridge/

It has been over a week now since I asked the mod why the banner announcement to post in the Bridge General Discussion Forum was taken down but this and Mac forum not set to read only.
No answers yet.

I only can post in this forum "feedback and Discussions"

Hi:
I cant post new topics in other forums. I only can do replies but no new posts.. Could you help me
Thanks
JP

Hi JP!
If you have a question, or suggestion, about using Discussions, from this page Feedback about Discussions, click on Post New Topic, as you have done here.
If you have a Technical question about Apple Hardware, Programs, Services, Technology, Software, Applications, Products, etc, from this page Discussions - Forum Home, select an appropriate Category from one of the sixteen divisions.
For example, under Mac OS X Related Software, choose the Category Mac OS X v10.4 Tiger.
On the page that opens, select a Forum, such as Installation & Setup, or Using Mac OS X Tiger.
Most Category pages, have numerous Forums within them.
But some may have only one, two, or three.
For example the Safari Category page has four choices listed under Forum / Category, but only two of them, are Forums:
Safari 3 Public Beta for Windows
Safari for Mac Support forum.
And the Apple Remote Desktop Category, has only one Apple Remote Desktop Forum.
On Forum pages, there is an option to Post New Topic.
Click here for all iPod Forums.
Click here for all iTunes Forums.
More info here How Is Discussions Content Organized.
It can be confusing, but explore the different areas, and you will acquire a better understanding of the hierarchy.
ali b

Why is it Adobe has over 6000 posts in this forum that they are completey ignoring.

Why is it that Adobe has over 6000 posts on this web site and obviously Adobe(who has taken my computer hostage}, has done nothing to rectify this situation. They have placed a botched up piece of software out for distribution and have done absolutely nothing for the consumer who unknowingly tried to use it. I for one would like to see some sort of response from Adobe. Are they working on this? Are they going to send us something so the can get 9.3 uninstalled? What?... And by the way, I think you have some program developers that should be looking for another field of work... just a thought..... this was neither developed properly nor was it tested thoroughly. It should never have been sent out for use. And now no doubt there are hundreds of thousands of consumers sitting at home not knowing what to do. Many probably going out and buying new computers becasue they don't realize it is a program issue. Shame, shame, Adboe.... Now you are right up there with WOW

Ok.
A. This is not an avenue to contact Adobe. It's a user to user forum. Just people helping other people.
B. Many post get ignored for many reasons (mostly due to lack of information from the original poster). I'm pretty sure there aren't 6000 post from people with the exact same issue as you.
C. The odds of hundreds of thousands of people having a certain issue is a little blown out of proportion don't ya think? I mean, out of 6 sytems, I'm having problems with zero of them. I'm sure there are others like me.
So, maybe we can all calm down here, explain the problem you are having (be sure to include all details even if you think it doesn't matter) and maybe one of us "users" can give you a hand?

"You do not have permission to post in this forum"

I have another account that cannot do anything much at all, and I would like to get it fixed without a five day wait for a Genius Bar appointment, then a 1 hour bus trip each way with an "I can't help with that" in the middle.
The account has been broken for over a year. This is what happens:
I can submit a question to the community.
I can open any postings that show as matches.
If there are no matches and I get thrown to the list of communities, then I can't view or post to any of them. I see the product names and icons (iPad, for example, but the list of related communities on the right is missing for all products. Which seems unfair because I own most of them.
You do not have permission to post to this forum
It appears you are not allowed to view what you requested. You might contact your administrator yadda yadda.
I have posted about this before:
https://discussions.apple.com/message/17393255#17393255
with no real answer (a threat of possible help, if you like, but with no resultant benefit.)
My question is - how does one get help with the help forums? I have phoned Apple's help desk and they said they could not do anything.
I would really like to get my primary account working - it connects to the right email address, it all set up and comfortable - and it does not use my name and location as an alias (who's idea was that? Fire that person!)
If you know of any court of appeal, help desk support forum support line, 21-step program or anything else that might help, please tell me. This has gone on long enough.
I tried to do something about this from the other account but to get support for the support communities you have to be able to post to them.
"That's some catch, that Catch-22"
"It's the best there is."
Thanks in advance for your help.
PG.

Seventy-one - To my knowledge, I have been a model citizen. And not impertinent of you at all - a very reasonable question. All words have been 1-3 or 5+ letters long, I certainly have not received any communication (that I have been able to find) that indicates a transgression. And there is another question - which castle, and are you saving for the deposit?
Bleach - other user name is "Ploughguy". But I was more after a means of contacting those with influence myself. Most fora like this have a contactable moderator or administrator. I am rather amazed that one needs the intercession of the saints. Such as St Roger...
Roger - This situation. The "can't look-can't post" situation. It has been (not) happening for some time.
I previously raised the issue here .
BTW, I created yet another ID because I was not careful enough when I set up the second ID and it defaulted to "NameFromSuburb". This is OK for johnfromnewyork but a huge privacy risk if you are ranulffromlittlestorpingintheswuff - an unusual name in a small place. I do not know how that default got through the peer review. Basically it says "ranulf has the good taste to own an Apple something which is portable and fenceable, and he lives not far from here". I have suggested to the privacy people that it is a very bad idea. And yes, I realise my alias is already out there. I have asked the privacy people to blow it away.

First post in this great new forum!

Similar Messages

Maybe you are looking for