First post!!! V04 error

Hello everyone
This is my first post on the forums, i bet you've heard this alot of times but yes i am getting a V04 error, ive tested the line speed afew times and its always around 5-7.5mbps
I managed to get through to the helpdesk and someone told me that QoS or quality of service was not enabled on my line???? And it would take 48 hours to fix...now that was either true or a very convincing technical excuse!! because its still not working! but even if there wasn't quality of service it still should work??
Any ideas??? 

VoD will not work at all and will always give you V04 if no qos. If it wasn't enabled then it takes 48 working hours and since this is a bank holiday weekend working hours will not have included friday, sat, sun or today.
What day did you call helpdesk? If it was say thursday then earliest it will work giving 48 working hours is wednesday any time up until midnight. If vod is still not working 48 working hours after you called heldesk then restart your vbox. Don't reset it though because you only get a limited number of resets per box before it locks the box. You should only ever do a factory reset if directed by the helpdesk.

Similar Messages

  • Please make this a good experiance for my first post on any board.  READ ME

    Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago)
    So after a while of hearing about MAC's I decided to start small and get an iPod (since they are so popular here in NYC) and see what apple was about. Well I really saw that Apple had a great product and started asking about their computers. And did plenty of research. And before the new Intel Macs came out, I was going to get a powerbook. But I had a feeling a new laptop was coming out and waited a lil while and sure enough. The Macbook Pro came out. So I went out and did all my research (as to this being the first real purchase of a Apple product and knew about the possible implications of a new first gen Intel chip in a apple product litterally making history) I knew I might become a new beta tester.
    So I started looking on these boards and did 2 weeks worth of hard research to see if the Mac Book Pro (MBP) was for me. And after all the problems i saw (ex: The whine, Right speaker distortion, heat coming from it, white line at bottom of screen, etc) I never saw or read anything about AOL connectivity problems. And I know, I know... alot of you are probably going to gripe and complain about AOL sucking and yada yada yada, but please. Cut me some slack. I actually like AOL. I got on it back in 92 when it came out, and really enjoyed it. And have been on it since. I like chatting on there, and so forth. And I hope you help with my problem instead of telling me to go get "a real ISP" I do have a real ISP, but I like my AOL too.
    So now to my problem....
    I have a Sony Viao 1.8ghz PC with 512 ram, 80 gig hard drive, 10/100 ethernet port. Connected to a Belkin Router (more info below on specs of router) connected to Opt Online Broadband Cable internet with VoIP. I use my macbook pro on the wireless network at my home.
    I got a mac book pro 1.83 ghz running 512 ram on Tiger OSX 10.4.6 I thought that I would wait till a connectivity patch (which I thought would have been 10.4.6) fix the airport problems came out till I posted something. But now that I've tried everything, I'm hoping you open this thread and help me and possibly someone else out there as well. I just d/l'd and installed the 10.4.6 update last night and it did'nt help. So here's more info on my specs. I have a belkin router wireless G 2.4 ghz 54mbs router and I have configured the router with it's firewall, wap2 encryption (as it's the only selection the router has that is available that matches what airport comes with in encryption) I hid my network, and have tried to upgrade the firmware on the router.
    Now Here's the real problem. I can connect to AOL on my MBP when I connect the actual ethernet cable to the MBP's Ethernet port (after I have let the cable modem do a hard reset to configure itself to a mac) I can connect to AOL. But when I disconnect the cable and return it to it's normal config, I can't connect to AOL. I can connect to the internet via safari, and firefox, and even AOL's IM on iChat. I can use Itunes all kinds of things. I can even play warcraft 3 wirelessly on battlenet. But connecting to AOL is a pain in the @$$. It's the only proggy I have that won't allow it to connect. I keep getting the error message "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." Of course All i see for a while is the spinning black and white circle. And it goes through step 1 and 2, goes straight to 6. Then it goes blank, and BAM! That message pops up. And what's so frustrating is that I've tried every possible configuration on AOL, my router and even system preferences, for it to let connect. I even went into system preferences on the mac and went down the the Internet & Network "Sharing" icon and tried 100 possible combinations on that in the services tab, and firewall tab. I've turned them on, off, tried to make exceptions ETC. And no matter how much I play with the personal file sharing and windows sharing advanced settings and sigh every possible combination to make AOL connect via wirelessly. And nothing. I then even tried to fix the connection under AOL in setup. I've gone through and selected TCP Script, Airport Script. Cable Script, And practically every script I can think of. And nothing. I even went on to AOL and downloaded thier alleged fix to wireless accessing AOL. And nothing. I've been searching all over google, AOL's website, and all over these discussion boards and no mention of anyone even having the same problem. But please, someone out there with their infinit knowledge of how Macs run and having more experience than me, Please make this a good experiance for my first post on any board anywhere reguarding a mac. A MBP at that too.
    An update to this, But amazingly enough, I actually got it to connect to AOL wirelessly for the first time yest. But I have no Idea how i did it. I tried for 3 hours to reproduce it and no luck. I was accessing my router at it's website config screen and somehow I clicked on connect to AOL and while it was trying to connect to it, i reset the router and BAM, it connected to AOL. And I was in shock. I thought I solved it. Somewhere while it was reseting the router it connected and stayed connected to AOL till I signed off and tried to sign back on to see if I could now connect, and guess what. The same dumb message keeps popping up "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." And all I did was sign off to test it, thinking I had fixed the problem. I tried for 3 hours like I stated above, and BAM got it connected to AOL wirelessly again (somehow while the router was resetting). And thinking I fixed it, or figured out the trick to getting it to work, signed off... I kissed aol goodbye again. And have been unable to reproduce the "glitch". SIGH Can someone out there please help me?
    I think I've made this message as detailed as possible, but please, can someone give me some constructive criticism on how to fix my AOL wireless connectivity problems. Do you know if it's my router? My MBP? AOL software? BTW, I got AOL software version 10.3.7 (Rev 4136.310 US) The latest version I D/L'ed from the AOL website. Anyone know If I should turn on or off some things such as personal fire sharing on, or firewall off or on? ANYTHING. Please. I've put alot of time into writing this post and making it as detailed as possible. And been having this problem for the past 3 weeks that I've had my MBP, and have waited long enough to use my AOL. If you need any further information or suggestions on making AOL work, please let me know. Thank you for taking the time to read all of this, and I really appreciate all of you in the time you take in responding back in trying to help me. I'll be monitoring this post almost hourly. So I hope someone out there can help. Thanks so much again. And help me make this transition to Mac a pleasant one knowing that there is a mac community out there willing to help a new mac client. Again, Many thanks
    In Heath and Wealth,
    Bruce
    Mac Book Pro 1.83 GHZ 512 Ram   Mac OS X (10.4.5)  

    I FIXED IT!
    FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
    P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
    Bruce

  • NEW: V04 Error Code Support

    If you get the V04 error message on BT Vision it means you may have a problem with your On Demand service. Slow broadband speed is usually the main cause.
    Updated V04 error message support has now been launched to help with these problems, you can access this by clicking the link below.  Follow the steps on screen to get advice on how to resolve:
    Fixing V04 Errors on BT Vision
    Check out this handy link for info and help with other BT Vision error codes
    Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    Hi Folks,  
    I am tidying up our sticky threads so have decided to archive a few more.  The links of the Sticky threads that I am archiving can be found below, just encase you want to view these again.
    New IP Channels - 28-02-2014
    System update on June 23rd - Problems with accessing or playing on demand programmes - 20-06-2014
    System update on June 24th - Problems playing On Demand programmes - 20-06-2014
    Temporary issue with BBC iPlayer - Issue resolved - 21-07-2014 
    Problems receiving local TV Channels - 24-02-2014
    Sky Sports 5 launch on Vision+ box - 11-08-2014
    National Freeview Retune - 3rd September 2014 - ‎01-09-2014
    BT Vision - Fresh New Look - 11-09-2014
    ITV Retune on Monday 2nd February - 30-01-2015
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • V04 Error.... Sticky thread didn't help :(

    Morning all.
    I got the V04 error for the first time yesterday morning (I've had BtVision since January) and I am still getting the error now.
    I have followed the instructions in the sticky thread about V04 several times, along with turning the hub and vision box off seperately to each other and sadly it has made no difference.
    BBC Iplayer works fine and I can download on my pc at the maximum line speed no problem, so I have no idea why this is happening.
    We dont get much reception and so rely on On Demand to watch a number of programs, so would love to get this sorted as soon as.
    Test1 comprises of Best Effort Test:  -provides background information.
    Download  Speed
    6338 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 6338 Kbps
     For your connection, the acceptable range of speeds is 2000-7150 Kbps.
     IP Profile for your line is - 7167 Kbps
    If you wish to discuss these results please contact your ISP.
    If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
    Your test has completed please close this window to exit the performance tester.
    Note: An Upstream test was not conducted on this line due to a technical issue. If your concern is related to upstream performance then please retry
    I did a speedtest yesterday aswell, although I did not save it, that showed my upload was around 447Kbps.
    Thanks in advance for any help.
    Solved!
    Go to Solution.

    I tried the cable, hasn't made a difference sadly.
    I redid the speedtest, no sign of an assured rate test during the speedtest, just the down and up.
    Test1 comprises of two tests
    1. Best Effort Test:  -provides background information.
    Download  Speed
    6552 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 6552 Kbps
     For your connection, the acceptable range of speeds is 2000-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :8124 Kbps(DOWN-STREAM), 444 Kbps(UP-STREAM)
     IP Profile for your line is - 7167 Kbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    340 Kbps
    0 Kbps
    444 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 340 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 444 Kbps

  • Cannot post now errors?

    I'm getting Cannot Post Now errors trying to post a long post in the Premiere Pro forum. But I get the same error posting 1 short paragraph in the testing forum?

    As Adobe-Admin points out, there are anti-spam efforts in force. Certain words trigger the filters. IIRC, mine was "s-t-r-e-a-m-i-n-g," but was in a post to the Premiere Pro, video-editing forum.  Filters are just that, and few allow full contextural AI (not Adobe Illustrator here).
    Yeah, I suspect it might be filters at first, but given that I'd never run into them before, and cutting my post in half didn't seem to help for either half...of course it was because there were multiple hits.
    I sort of wonder if there's forum-specific filtering going on, or if the global filter was scrod -- I guess since it hit the testing filter it's a global filter problem. I'm sure I must use the word "choice" all the time :-)...
    Speaking for only one - you are forgiven.
    Thanks. I had some strange urge, I guess, to get that post off, before I had to abandon the desktop computer I was sitting in front of. I suppose I could have just saved the post somewhere else...

  • V04 errors again

    Been geting V04 errors now 3 months but only after 10pm at night. 17mb connection 13mb throughput. No line problems. Everything has been changed except my silver box connected via SFSB and data cable to box  now BT want to swop the box but its only after 10pm at night and i dont  want to wait in for a day to swop the box for something thats not going to work. Anybody else had the same problems ?   
    Regards
    Tally

    Hi tally100,
    Could run run a speed test after 10 pm and forward me the results please?
    If you drop me in an email please using the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • XML Publisher post-processing error 'java.io.FileNotFoundException'

    Hi,
    We are getting following XML Publisher post-processing error while running XML Publisher report.
    It was working earlier but suddenly its erroring out.
    [9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
    [9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
    [9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
    [9/07/10 9:00:18 PM] [39177:RT559655]
    Template code: XXHPOXPRRFLR
    Template app: XXH
    Language: en
    Territory: 00
    Output type: PDF
    [9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
    [9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
    Please help me out to resolve this issue.
    Thanks & Regards,
    Sagarika

    Hi,
    java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
    Thanks,
    Hussein

  • POSTING PERIOD ERROR WHILE DOING GR

    Dear All,
    I am facing error in posting period while doing GR -
    1) Posting period 007 2010 is not open - For current date GR
    2) Posting only lies in periods 2010/07 and 2010/06 in Company Code - For future date in 2010-08
    3) Posting period 006 2010 is not open - For back date GR in 2010-06
    Checked T Code MMRV - Ticked -  Allow posting in previous per. (Still facing the same error)
    Also as per MMRV -
    Current period  07 2010
    Previous period  06 2010
    Last period in prev. year 12 2009
    Please guide
    Vikas

    Hi,
    Check on it:-
    COGI Posting period error
    Re: Error in Opening the Posting Period.
    http://www.sap-img.com/sap-sd/movement-type-posting-error-in-delivery.htm
    pherasath

  • This is my first post. I would like to thank you all for all of the information you have posted on this forum. It has been most helpful to a Newbee. I have a MBP17 w/trackpad and click bar from '08. I need a bigger HD, how big can I go? THX

    This is my first post, but I have been following this forum for a while and you have all been very helpful in my MacEducation. I have a MBP17 10.6.8 w/6GB ram from '08. I need to upgrade my HD from 200GB. I would like to go as big as I can and would appreciate any experiance you've had. Could I go 750GB or 500 GB @ 7200 rpm.  Should I upgrade to Lion before I swap the drive out?  Thanks, Johnny

    Hi Johnny,
    Yes you can do the 750 or 500, 5400 or 7200. Just make sure it is 2.5" SATA and 12.5mm high or less (there is at least one HD out there that is 15mm high and will not work).
    Lion: I don't know that it matters much either way, just don't do them at the same time. That way, if there are issues, you have a much better chance of troubleshooting one major change instead of two.

  • IDOC is posting with Errors in File to IDOC scenario

    Hi,
       I did the File  to IDOC scenario for CREMAS  . IDOC is posting with Errors .. i.e. in the status record it was showing  56- EDI: Partner profile inbound not available  ..
    If I manually process that IDOC in WE19 , then it was processing successfully..    and in the  we19 it was showing Inbound Processing : Port Not Maintained    but even though manually it was posting fine...
    any ideas regarding this will be appriciated..... 
    Regards
    Babu

    Please check whether you had done the following assuming your doing File to Idoc
    Settings in your Business service for the receiving system
    Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
    Settings in R/3
    WE20 - Add the partner profile for the particular message type cremas and process code.
    Your statement
    " and that same logical system name  had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
    Please do mention R/3 Details in the receiver business service or system.
    Thnz

  • First post for me I have just updated ipad to ios8 and now I can't sync music from my Mac to it witch is running latest itunes it starts to sync then stops straight away with no info why as anyone got any ideas please?

    First post I have just updated iPad to latest iOS and now I can't sync my music in iTunes form Mac which is running latest  version it starts but stops straight away and gives no info I've tried with wifi off  and on turned everything off and back on but nothing as any one got any idea please ?

    I have the exact same problem! It started this month, I don't know what to do

  • While excise posting, an error is coming "Balance in Transaction  Currency"

    Dear all
    While capital excise posting, an error is coming "Balance in Transaction  Currency" for the capital goods posting.
    During the excise duty posting J1IEX our clint done some manuvall entry for excise duties so
    at the time its 0.01 diffrence is coming in balance thats why we are not able to post the document.
    so please can any one give the solution for this
    regards
    pramod

    hi
    Check Excsie duties in "Excise Duty" Tab at Item Details level.
    Kindly note that all the duties (BED, ECS and SECess) in case of RG23C Part II posting must be in EVEN numbers.
    For e.g. Check whether SECess is 10.63 (ODD No) then make it either 11.00 or 10.64 or 10.62 i.e. EVEN No otherwise during Part II posting it will always show balance of 0.01
    Check how much piase is the difference. Then you can decide how many values to be rounded off.
    To avoid this type of problem better to ensure all amounts ( BED, Ecess and Hr Ecess) are in Even figures.
    hope it clears
    regards
    kunal

  • First post but hey

    ok this is my first post here, i have mainly been a lurker looking around see what problems can be resolved by what methods... (my specs are at the bottom of my post)
    the only problem that I seem to have is with HitMan 2, which i have not found a solution too...
    seems that when i am playing the game it crashes back to the desktop, and then i have to relaunch...
    this is kind of annoying, another thing is the temp of the CORE on the vid card, its sooo high, around 48C... is this normal??
    Thank you so much for the help, I know you guys try, and with only 4 mods, its probably hard to answer all these questions...
    EDIT:
    oh and i am thinking about getting a better PSU, which one do you guys recommend??
    CoolMAX 550w Aluminum PSU
    or
    Power Maxx 520w Aluminum PSU
    or
    Antec 480W True Blue PSU
    System Specs:
    Enermax Case
    350watt PSU (came with the case)
    AMD Athlon XP 2100+ @ Stock
    Volcano 7 w/modded 80mm Fan
    Soyo KT400 Ultra Platinum
    512MB Kingston PC2700 DDR @ Stock
    80GB Maxtor HD w/8mb Cache @ 133 ATA
    MSI GeForce 4 Ti4200 128MB DDR AGP @ Stock
    D-Link 10/100 Lan Card
    OnBoard Sound
    48x24x48 LiteOn CDRW, 16x LiteOn DVD
    External Temp - Idle: 42c ~ Load: 48c via BIOS & MBM5
    CPU Core - Idle : 51c ~ Load: 61c via BIOS

    http://www.anandtech.com/showdoc.html?i=1774&p=1
    antec for me wins in most cases by the 3 year rather than 12 month warrety most others have
    i regard 30 pounds a year as a sound investment
    and there is no reason it would not last longer
    make sure sound as well as vga drivers are up to date
    all the bsod crashes with some games and the nforce games were sound drivers not vga at all
    try turning things like eax of,lower sound acceloration
    and get any patches out for the game

  • Cash flow start date and first posting date in REFX-RECN contract

    Hi,
    While reviewing old contracts, I have noticed that in contracts where first posting date is mentioned,  the cash flow start date is not editable in contract change screen.  In contracts where first posting date is not mentioned, the cash flow start date is editable in the change screen.
    Is this standard system behaviour?  Because i have read in the forum that cash flow start date is not editable after first posting of the conditions.
    I tried to change the field status of cash flow start date through RECACUST,  but despite keeping the field status as display,  the cash flow start date remains editable.
    Please help on how to make the field status not editable.
    sadhana

    Hi Sidhharth,
    Thanks a lot for your immediate reply.
    I still have one query.  You have written that
    Where First posting date is not updated it indicates that posting of the contract is yet to be done,not a single posting has been performed hence Cashflow date is editable.
    This means first posting date is always filled up after condition is posted.  but in our system i find that the date is blank and greyed out even after the 1st posting.
    Could it be due to having several conditions in the contract - some with one time posting, some with monthly posting?  eg.most of our contracts have atleast two contions - one for deposit which is one time payment, one for rent.  the first posting date is updated in individual condition for rent in conditions tab  but first posting date in terms tab is blank.     But even in single condition contracts, the first posting date is not getting updated in term tab (the field gets greyout out once contract is activated)
    Thanks once again.
    Sadhana.

  • Illustrator help - first post....

    Hi,
    First post on this forum although I've benefited much from the Dreamweaver forum over the past 12 months.
    I've been in the process of re-training and have now got around to Illustrator CS5 classroom in a book course this past week and I now find myself asking a couple of questions. The main question is as follows:
    1) Is there a book that would come very highly recommended along the lines of 100 things you can/should do with illustrator in the real world of web design?
    I'm mainly focussing on web design and will most likely be using Illustrator (as skills allow!) to create images/backgrounds/logos for use in sites that I build. My challenge is that I'm not "arty" really at all so would hugley benefit from something that I can use as a reference guide for logos, images making etc. I have similar for CSS, HTML & J-Query and hope the same exists for AI.
    Sorry it's a very basic question but I really want to set off in the correct direction.
    Many thanks.
    Regards
    Rob

    Agreed but I would like to cover off some of my own
    Design work going forward to I'm going to push on with  learning some more design fundamentals.
    My challenge with art school is I've also just moved to France and learning the language as well challenges all round!
    Thanks for getting back to me.
    Cheers
    Rob
    Sent from my iPhone

Maybe you are looking for