First problems surfacing
My 8g iPhone is having problems:
1) the slide bar does not respond to my touch and will not slide to open. This is usually overcome by pressing the home button several times to get to the home screen.
2) the bigger problem is that the browser won't stay open very long. I'll be browsing and after a short time get a black screen before it returns to the home page. VERY aggravating.
any suggestions. TIA
MBP Mac OS X (10.4.10)
Check this link and follow the steps in the order provided until the problem is resolved and if not, call AppleCare.
http://www.apple.com/support/iphone/troubleshooting/phone/
Similar Messages
-
My first problem is that I have no apps on my iPod desktop. After using my computer to install something onto my iPod 5, it somehow disconnected. When i restarted the iPod, some apps (Safari, FaceTime, Game Center, App Store, iTunes Store, Camera, and some others disappeared. Apps like Flashlight and Jetpack Joyride which I had previousyl downloaded from the App Store were still there. I wanted to get the aforementioned apps back, so i decided to back-up my iPod to iTunes. The downloaded apps weren't able to be backed up ("authentication problems") but some apps like Tips, Video, iBooks, Reminders, Stocks, Settings, Voice Memos, were backed up. I then proceeded to factory reset the iPod, deleting everything and starting it as a new iPod. Once I finished this, I looked my desktop to see everything was gone, absolutely everything. I double-pressed the home button, showing Settings was open, but that's it. I opened settings and factory reset it again, this time choosing to restore from a backup. After doing this, I found the iPod looked the same as the last time i reset it - blank. If I scroll down the middle of the screen to bring up a search bar, I can find only the apps I backed up (Tips, Video, iBooks, Reminders, etc.) That is the first MAJOR problem. I was getting really frustrated, so I opened up iBooks and discovered I can download a could free books from the store, which was essentially the only thing I can use the iPod for. There were no videos in the Video app, and pressing the "Go to Store" button did absolutely nothing. No lag, it just ignored my touch. Once i found a few books, I decided to start reading. Eventually, i brought this iPod somewhere to read it, and didn't bring the charger with me. The battery died, and when i got home, tried charging it.
Which brings me to the second problem. A minute or so after I plugged in the charger into the dead iPod, the Apple logo came on. But the iPod never started up. The logo stayed there, getting dimmer after a minute, but no vanishing even after fully charging or pulling out the charging cord. It didn't leave even after hours, but by then the battery died again. If i press and hold the power button and the home button at the same time, the Apple logo disappears. But I can't get into recovery mode utilizing the volume buttons. If i hold the power button when the screen is blank, the Apple logo comes back. But the iPod cannot start up.
After everything was wiped, i was pretty angry. But I still had books to read, even if i couldn't do much else. Then the battery died, and it really wrecked me up. I feel so mad right now, although this actually happened about 4 days ago. The iPod being wiped happened about 3 days after the Christmas holidays began. This iPod also was not brand new, I bought it off a friend who had it for over a year, although it was in perfect condition (Obviously out of warranty.) I desperately need a solution to this HUGE problem. Due to personal reasons, I can't go to a Genius Bar or go to an Apple retailer in person, but communicating by E-mail is an option, as is instant messaging.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Problem surface pro 2, windows 8. brush pressure is not working in Ps CC ,
problem surface pro 2, windows 8. brush pressure is not working in Ps CC
Este foro es un Foro de Usuarios en español.
Puedes probar a explicar tu problema con mayor detalle.
Indica por favor detalles de hardware
(Podemos estar familiarizados con Photoshop, pero no con tabletas híbridas)
Concretamente, cómo utilizas el pincel de presión? -
I purchased my MacBook Air 13" 23 months ago and it has been awesome! My first Mac. I loaded OS X Yosemite 10.10.1 about two weeks ago without problem. I've been experiencing very slow internet downloads. I've checked all my settings and line speeds, it takes 30 to 45 seconds to bring up a page, before it was 3 to 5 seconds. Help!
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
Hi All,
One week ago I got my Zen V plus 4GB mp3player and I was very happy with it!
I already read that this model has a perfect sound quality, that's why I bought this player, but when I listened to it for the first time I was a bit astonished. The quality wasn't that good as I thought it would be. I'm sure the creative ear bugs have something to do with it, for sure, but I used a minidisc before this and the difference is big.
Anyway, that's not the thing I want to tell you all. What concerns me now is the 'cracking' I hear in my music when I use the Zen V plus. With cracking I mean the 'dropouts' I hear when I cange a track (forward) or I go back (reward) to a previous song or I just pauze the song. Also while changing the preset of my EQ, everytime I change the number of a certain freq., I hear a 'dropout'. I made a little sound file, recorded from the player (I connected the headphone jack to the line in of my pc), of these cracks when I play songs on my mp3. Somewhere about 8 seconds of the sound file, you can hear it very good, when I pauze the song.
http://users.pandora.be/Aeropolis/sample.mp3
A second sample I made to show you the dropouts I get while changing the Equalizer presets. I chosed the song of Pink Floyd (Great gig in the sky) which has no dropouts at all. The volume of the player is 22, bassboost on. Where the bass guitar starts playing, you can hear the drops the best.
http://users.pandora.be/Aeropolis/sample2.mp3
How can I resolve this? Could a firmware update resolve this? If yes, then I suppose creative will have to start finding a new firmware for this player, since I already downloaded the newest version on my Zen V plus.
I know some other people who have the same issue too.
Thank you very much, hopefully this problem can be solved.Message Edited by Alex_R on -04-200605:36 PM
Message Edited by Alex_R on -04-200605:36 PMhi,
first of all, thank you for your reply...
I tried other earphones, and as you can hear, on the computer (headphone jack linked with lin in) you can hear the cracks too, so I don't think the earphones are bad.
I experimented with all the EQ freq's, also with the EQ on/off, with the bassboost on/off...it's like the headphone jack isn't connected very well inside the player.
Anyway, I'm going to buy new headphones, maybe something changes then or I don't hear the cracks very loud because of the lone tones produced by the newer headphones.Message Edited by Alex_R on -06-20062:42 PM -
Hi,
this is my first time using Streams so perhaps my questions are stupid ... I have a two node RAC in 10.2.0.4 with all patches needed for using Oracle Streams (10.2.0.4.4 to be more exact). This RAC has some tables from which i need to replicate a few columns. Mi first aproach has been using the following code to test a little example from a table with three columns and removing from lcr two of them.
create or replace function removecolumns (inAnyData in SYS.AnyData)
RETURN SYS.AnyData IS
ret pls_integer;
typelcr VARCHAR2(61);
lcrOut SYS.LCR$_ROW_RECORD;
v_col3_old_anydata SYS.AnyData;
v_col3_new_anydata SYS.AnyData;
v_col3_old_str varchar2(512);
v_col3_new_str varchar2(512);
BEGIN
typelcr := inAnyData.getTypeName();
IF typelcr = 'SYS.LCR$_ROW_RECORD' THEN
ret := inAnyData.GetObject(lcrOut);
IF lcrOut.get_object_owner() = 'SCOTT' THEN
IF lcrOut.get_object_name() = 'T6' THEN lcrout.
lcrout.delete_column('COL2','*');
lcrout.delete_column('COL3','*');
RETURN SYS.AnyData.ConvertObject(lcrOut);
END IF;
END IF;
end if;
RETURN inAnyData;
END;
This first replication has been for the whole schema (this is my first test ...). The problem appears when I try a dml. The error in the alert log from the node in which I am connected is:
LOGMINER: Begin mining logfile for session 1 thread 2 sequence 22, +DATA/probid/onlinelog/group_4.266.735925225
Thu Dec 2 17:51:21 2010
Errors in file /u01/app/oracle/product/10.2.0/db_1/admin/probid/bdump/probid1_c001_4950.trc:
ORA-23607: invalid column "COL2"
ORA-06512: at "SYS.LCR$_ROW_RECORD", line 325
ORA-06512: at "STRMADMIN.REMOVECOLUMNS", line 21
ORA-06512: at line 1
Thu Dec 2 17:51:24 2010
Streams CAPTURE C001 with pid=32, OS id=4950 stopped
Thu Dec 2 17:51:24 2010
Errors in file /u01/app/oracle/product/10.2.0/db_1/admin/probid/bdump/probid1_c001_4950.trc:
ORA-23607: invalid column "COL3"
ORA-06512: at "SYS.LCR$_ROW_RECORD", line 325
ORA-06512: at "STRMADMIN.REMOVECOLUMNS", line 21
ORA-06512: at line 1
The most extrange is that the update works fine until I do create the column COL3 on source (and col2 already did exist) , it then is replicated to target. From target database I do remove the column COL3 and try and insert, this is the momento in which the error appears.
I have two questions,
- Any suggest for this error?
- How should I focus this replication with a set of tables and only a few columns in the target?. I have used only one process for capture-replicate-apply and I think I dno not need more. If it is possible I wouldn´t like to use dbms_streams_adm nor apply dml handler to solve the problem...
Tks.
Edited by: user12046001 on 02-dic-2010 13:17Thank you !,
however the error still appears where I try an update or delete operation:
Fri Dec 3 11:52:52 2010
Errors in file /u01/app/oracle/product/10.2.0/db_1/admin/probid/bdump/probid1_c001_8434.trc:
ORA-23607: invalid column "C"
ORA-06512: at "SYS.LCR$_ROW_RECORD", line 325
ORA-06512: at "STRMADMIN.REMOVECOLUMN", line 17
ORA-06512: at line 1
Fri Dec 3 11:52:55 2010
Streams CAPTURE C001 with pid=37, OS id=8434 stopped
Fri Dec 3 11:52:55 2010
Errors in file /u01/app/oracle/product/10.2.0/db_1/admin/probid/bdump/probid1_c001_8434.trc:
ORA-23607: invalid column "C"
ORA-06512: at "SYS.LCR$_ROW_RECORD", line 325
ORA-06512: at "STRMADMIN.REMOVECOLUMN", line 17
ORA-06512: at line 1
By now, this is the code used (really it´s yours ...):
create or replace function borrar( inAnyData in SYS.AnyData)
RETURN SYS.AnyData IS
ret pls_integer;
typelcr VARCHAR2(61);
lcrOut SYS.LCR$_ROW_RECORD;
BEGIN
typelcr := inAnyData.getTypeName();
IF typelcr = 'SYS.LCR$_ROW_RECORD' THEN
-- Typecast AnyData to LCR$_ROW_RECORD
ret := inAnyData.GetObject(lcrOut);
IF lcrOut.get_object_owner() = 'SCOTT' THEN
IF lcrOut.get_object_name() = 'T6' THEN
lcrOut.delete_column(column_name=>'C');
lcrOut.delete_column(column_name=>'NUEVA');
RETURN SYS.AnyData.ConvertObject(lcrOut);
END IF;
END IF;
END IF;
-- if we are here then the LCR is not a row
-- or the row was not one bound for transformation,
-- so we alter nothing
RETURN inAnyData;
END;
declare
action_ctx sys.re$nv_list;
ac_name varchar2(30) := 'STREAMS$_TRANSFORM_FUNCTION';
BEGIN
action_ctx := sys.re$nv_list(sys.re$nv_array());
action_ctx.add_pair( ac_name, sys.anydata.convertvarchar2('strmadmin.REMOVECOLUMN'));
dbms_rule_adm.alter_rule( rule_name => 'SCOTT1',
action_context => action_ctx);
end ;
SQL> select rule_set_name from dba_capture;
RULE_SET_NAME
RULESET$_3
SQL> select rule_name from dba_rule_set_rules r where r.RULE_SET_NAME='RULESET$_3';
RULE_NAME
SCOTT1
SCOTT2
select rule_name,RULE_CONDITION from dba_rules where rule_name in ('SCOTT1','SCOTT2');
Rule Name Rule Condition
SCOTT1 ((:dml.get_object_owner() = 'SCOTT') and :dml.is_null_tag() = 'Y' and :dml.get_source_database_name() = 'PROBID' )
SCOTT2 ((:ddl.get_object_owner() = 'SCOTT' or :ddl.get_base_table_owner() = 'SCOTT') and :ddl.is_null_tag() = 'Y' and:ddl.get_source_database_name() = 'PROBID' )
Sincerely, I can´t understand where is the error. Thank you for your help :) -
6714 init PCI display first problem
I have a MSI 6714 V1 mainboard, that has integrated graphics. Now i want to install a PCI graphics card with TV-out, but no matter how i adjust the BIOS settings, the computer does not want to use the PCI-card. I have tried to disable the onboard graphics card and enable init PCI display first, but it does not work. I have read that others have had the same problem with this mainboard. I have the newest BIOS version and there is nothing wrong with the PCI card. (Powercolor 9200SE PCI).
Any hints?Quote
Originally posted by Lightyear
I have a MSI 6714 V1 mainboard, that has integrated graphics. Now i want to install a PCI graphics card with TV-out, but no matter how i adjust the BIOS settings, the computer does not want to use the PCI-card. I have tried to disable the onboard graphics card and enable init PCI display first, but it does not work. I have read that others have had the same problem with this mainboard. I have the newest BIOS version and there is nothing wrong with the PCI card. (Powercolor 9200SE PCI).
Any hints?
Well I dont really know... I was just thinking maybe you should read ur manual... Because some motherboards have PCI ports that are previewed for certain PCI cards...
For example: I had a friend.. he couldnt get his soundcard working so then i told him to read his MB manual.. and in the manual it said: "for sound cards use PCI slot 2"... or something like that.... And it worked for him...
I dont know why they do that... I think it has to do with the IRQ's...
As i said.. its just an Idea.. I dont know your motherboard...
sorry
greez Steph
good luck -
Newcomer - Hello - my first problem....
I have my first blackberry. A curve 8520 v5.0.0.681. with Virgin Mobile.
I seemed to have managed to connect to my wi-fi home network as i have the relevant icons on the home screen.
But for some mad reason windows 7 on my laptop does not find or 'discover' my blackberry when I come to add a device. I realize this is probably more a windows problem but i have had no success in windows forums...hoping for help here at Blackberry ?Greetings, and welcome to the BlackBerry.com Community Support Forums.
Have you installed the BlackBerry Desktop Software to the laptop?
Can you try using a different USB port on the laptop?
Article ID: KB00125 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I restarted my MacBook Air (latest version & 10.9.1) for the first time in a week (had been putting in sleep mode when not using) and am suddenly getting boxes asking for a password so that CalendarAgent, com.apple.internetaccounts.xpc, MenuCalendarClock iCal, Messages Agent, etc. can use the "login" keychain -- or "Local Items." I can't get past these boxes.
Frankly, I don't remember ever setting up a password for Keychain in past years, and I have never been asked for one like this before. Passwords I've tried don't work.
I have a 2 month old clone that I could pull a file from, but I think Mavericks hides this stuff nowadays. I could also just clone it back -- probably the best idea.
Having had many Macs over the years, I have never run into this problem before!!Well, I moved my SuperDuper clone back to the MacBook Air and all is well. The password that wouldn't work in Keychain was the right password because it works now.
Apparently, somehow Keychain got corrupted, but I have no idea how that happened -- never have seen the problem before and hope I never see it again. -
i JUST RENEWED MY CONTRACT ONCE MORE , AS i HAVE DONE PLENTY OF TIMES IN THE PAST , BUT THIS TIME THE PHONE i PICKED , WELL THE EXILUIM WORKED FINE FOR ABOUT ONE WEEK , BUT THEN I REALIZED IT WOULD NOT HOLD A CHARGE !, now by this time ( being with Verizon as long as I have and not having had any problems ) I had thrown the box away that the phnoe came in , well now they will not take it back because the box is gone, and they will not send me AT THE LEAST ANOTHER BATTERY FOR MY BOULDER . I cannot get anyone to help me ( a good paying customer with two active phones, ) but I will leave VERIZON AS SOON AS POSSIBLE, the way I see it they have but one chance to keep my business and that is to honor the " worry free " thing they so boast on.
mccahill wrote:
i JUST RENEWED MY CONTRACT ONCE MORE , AS i HAVE DONE PLENTY OF TIMES IN THE PAST , BUT THIS TIME THE PHONE i PICKED , WELL THE EXILUIM WORKED FINE FOR ABOUT ONE WEEK , BUT THEN I REALIZED IT WOULD NOT HOLD A CHARGE !, now by this time ( being with Verizon as long as I have and not having had any problems ) I had thrown the box away that the phnoe came in , Being with Verizon as long as you have, you would (SHOULD) also be aware of the policy that the phone needs to be returned IN THE ORIGINAL PACKAGING....I ALWAYS save everything until I am beyond the return point....I know I can return it, but I also know I need the packaging and the UPC to get any mail in rebates--so I don't even cut out the UPC until I know I'm going to keep the phone.
well now they will not take it back because the box is gone, Ummmm, yeah, that's what the rules are... and they will not send me AT THE LEAST ANOTHER BATTERY FOR MY BOULDER If it's your old phone, then it's on you--I replace batteries and don't expect Verizon to pay...there are lots of accessory vendors on line with awesome prices; just be sure to get an OEM battery. I've had good service, fast delivery, and excellent products buying online.
I cannot get anyone to help me ( a good paying customer with two active phones, ) but I will leave VERIZON AS SOON AS POSSIBLE, the way I see it they have but one chance to keep my business and that is to honor the " worry free " thing they so boast on. You have (had) a responsibility as well; there are conditions for returning and exchanging phones via the Worry Free Guarantee, and you don't have the original packaging. You can keep trying, and you may eventually get a sympathetic rep. Good luck. -
First problem since 2009 - Yosemite
Problem description:
I have a fairly old macbook pro, purchased in 2009. Never had any problems with it but since upgrading to yosemite it takes minutes to boot up, before the download it was seconds. Also the spinning ball of death shows up at least once for every thing I try to do. I’m not very Mac savvy, so I don’t know what to do. I have used it since 09 for school and at home but never had to do anything technical. Any help would be appreciated!!
EtreCheck version: 2.1.6 (109)
Report generated January 24, 2015 at 1:42:00 AM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Technical Specifications)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 334
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 0:51:39
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 159.18 GB (75.90 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Safari Application (/Applications/Safari.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.287 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 159.18 GB Disk used: 83.28 GB
Destinations:
Stephy's External Drive [Local]
Total size: 999.86 GB
Total number of backups: 1
Oldest backup: 2014-10-10 23:44:47 +0000
Last backup: 2014-10-10 23:44:47 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 159.18 GB X 3)
Top Processes by CPU: ℹ️
7% WindowServer
1% Google Chrome
0% Google Drive
0% AppleSpell
0% askpermissiond
Top Processes by Memory: ℹ️
146 MB Google Chrome
76 MB Google Chrome Helper
43 MB Finder
34 MB WindowServer
26 MB mds
Virtual Memory Information: ℹ️
34 MB Free RAM
652 MB Active RAM
637 MB Inactive RAM
362 MB Wired RAM
2.39 GB Page-ins
84 MB Page-outs
Diagnostics Information: ℹ️
Jan 24, 2015, 12:51:03 AM Self test - passedWhile Apple says 2 GB of RAM is required the consensus seems to be at least 4 GB is needed for a smooth operating OS. More than 4 GB is better.
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing -
"error 3194 and have tried all recommended steps, first problem with this iphone"
Hi, for a few months now I've been using my brother's old iPhone 3GS as an iPod, and I haven't jailbreaken it or anything of the sort, and I've installed every update since, and today I installed the newest update and since it has been in recovery mode and whenever I connect it to iTunes and try to restore (I backed up a few days ago) I am greeted with an iTunes message saying "error 3194" and I've tried everything mentioned in the specific update article for it except for the one pertaining to a .ipsw because when I go to advanced settings I am unable to find anything of the sort. And it'd be much appreciated if any of you could help! Also, I am using a windows computer, not a mac, and have never had problems with this iPhone until this new update.
It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.
-
NEXT PREVIOUS LAST FIRST PROBLEM
hi to all,
i get this error when i press next,previous,last first button... "Error.. you need to insert first item" and another is when it work the last and first its empty in all the text item.....
my code is..
Next_REcord for next button
previous_record for previous
last_record for last
first_record for first...If you want to navigate through the records of you 're data block you need records.
So first 'execute_query'. You can put this in when-new-form-instance trigger.
If there are no records in your table, it's normal that you get this error when trying to navigate.
Regards -
First problem! iSight won't work for iMovie or PhotoBooth
It works for iChat AV, but not Photobooth (it did before!) and iMovie (it did work before here too.) Repaired permissions, Zapped PRAM... anyone else have this problem? I'll call Apple tomorrow.
Apollo:
When you say, "Before", before when? Before 10.4.4? Before you downloaded some other software? What happened between working and not working? If you backed up your data, do an erase and install. Need more information. -
Hi Guys! I can not create new partition on my MacBook Pro. I don't what just happened on it. Before i could but these fews day i can't. When I try to create new partition it said: Partition failed. couldn't modify partition map because file system verify failed. My HHD is samsung sata 640GB.
When I went to iONE (Apple store in cambodia) they check for me and they said my HHD is no problem. So please help with this.
Thanks you so much......! any ideas please send to [email protected] or [email protected]I've just scanned my logs and I've found a lot of failed connections to teamviewer but I do not have this app installed. Can you suggest me a way to stop these connections? I found tons of messages like this:
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service[1428]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/Resources: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer[1430]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/MacOS: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
thx
Maybe you are looking for
-
Ios8 - how can I disable game centre
Every time I play a game, that game centre wants me to log in. Even if I do (reluctantly!) log in, the miseriable piece of @#@# still pops up a bloody banner every time i start a game! I do NOT want to publish anything to game centre and I do NOT wan
-
My PPC iMac will not startup with the CD holding down "C" or from holding down the option key, then selecting the CD and hitting enter. Any way I try it, it goes straight to the regular HD startup. I see I could select the CD as startup in the system
-
Ich habe schon seit längerem extreme Stabilitätsprobleme mit Premiere Pro CC. Als ich keine Lösungen in Froren gefunden habe habe ich Folgendes versucht: Erst habe ich Premiere neu installiert. Kein Erfolg. Weil ich wirklich auf diese Software angewi
-
Is this possible? Serious help is needed.
Recently my hard drive crashed and apple fixed it under warranty. I was running OS X but they installed Leopard(totally not complaining) however when I opened up iWeb I noticed some changes. I no longer have the option to insert html widgets nor do I
-
Laserjet 1020 printing alignment
I am using a Laserjet 1020 on Windows XP, connected via USB. When printing documents from Word 2007, Print Preview shows the document as I want it to be, but when it actually prints, it comes out about half an inch higher up the page. Nothing is cu