First project with 16:9 film

I am doing my first project with film that was captured using the 16:9 mode on my sony camera. My question is if I have to do anything different when importing this footage from the DV tapes to FCE? I noticed there are many posts on this but just want to make sure I am taking the right steps. Thanks.

Anamorphic refers 16:9 and has nothing to do with audio. 32K is the audio sample rate. FireWire Basic should only be used with Canon cameras.
You can select the captured items and in the Anamorphic browser column check them to tell the application the material is supposed to be treated as 16:9.
Also make sure you make a new sequence that's in the correct widescreen aspect after you've changed to the correct settings.

Similar Messages

Doing first project with film. EDL questions.

So I'm doing my first project with Super16 in a month or two and I've got a couple of questions. The workflow will be shoot on 16 > edit in 24p DV > finish on film. I know how to do almost everything right up until we finish editing, but actually getting all the information ready to do a negative cut is something I don't know about. How does Cinema Tools factor into this? What do I need to do about the audio? What sort of windowburn or keycode information do I need to have? Do I do anything different when I import the 24p DV footage? Your help is greatly appreciated.

I have not done what you are attempting, but my understanding is that you should get flex files to bring into Cinema Tools that reflect the keycode/timecode relationship created in telecine. From there you can export a cutlist that should give you keycodes that the neg cutter can work from.
Have you read the manual for Cinema Tools?
Patrick

Newbie - First Project with SAP Team... Monitoring Solutions/Strategy?

I just started my first job out of school two weeks ago. My first project is to work on a "monitoring strategy" for our large SAP enterprise system. We have CRM, SRM, ERP, Sol Man, EDOS, XI, etc... I am supposed to dig into each of these portions of SAP and determine what may need monitored and how to set that up... Does anyone have any ideas of how I should get started? I am new to SAP but have a decent high level understanding of it. Any help would be appreciated. Thanks

The first thing about being a newbie (welcome though!) to monitoring questions at SDN is that you need to read the "rules of engagement" first.
These clearly state:
>- Please do not Cross post.
> Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
Well, as this NW Admin forum is the most appropriate one and the other 5 which you have cross-posted to are (in my opinion) not, I will not lock this thread here. Most likely your other threads will be deleted or locked by other moderators though.
Please also read the rest of the rules by end of week three... which explain further about what is monitoried in the forums...
Cheers,
Julius

First project completed with FCPX Music Video

I just finished up my first project with FCPX
Its a music video for one of my songs.
I shot and edited the video myself with the help of wife and daughter. The video has since gone off to
a video production house, to transfer to broadcast format for here in Australia (digital beta) and its on its way to TV stations for broadcast.
I have very very little experience with video, and had only just gotten FCPX a couple of weeks before along with
the new canon hfs 20 which i used to shoot the video. It was a whirlwind learning curve 8).
I learned plenty about what not to do the next time I make one. 8)
I got some really great help here on the forum and wanted to say thanks, I wouldnt have been able to do it without it.
www.ozlandmusic.com
is my website where you can see the video.
I have no previous experience as I said with video editing, before FCPX and found the process reasonably intuitive.
It was great to be able to sync the video and audio together..and the effects in FCPX were easy to use, as was keyframing which
i didnt even know existed a couple of weeks back 8)
I really like the product. I am happy with how the video turned out, and I am looking forward to making a better one next time.
Again thanks for the help
cheers
Wiz

Thanks everyone for the kind words.
re first bit of video editing...8)
well, I had used iMovie a couple of times to transfer VHS tapes to DVD and sony home studio once about 4 years ago, and I used windows movie maker once.... but I had never done any "editing" so I take your comment as a compliment.
I literally have no more experience than that. I guess its a testament to how easy FCPX is to use for someone new. I found the things like keyframing, very intuitive, and I have a strong audio background (logic, cubase, sonar etc) and have run a recording studio for many years. So I applied the same sort of techniques to video ediiting, eg look at other peoples work, and try and work out how they do what they do, and then try and duplicate it. There are a wealth of training videos available, and I watched a heap of those, within the first couple of weeks (you tube videos) about how to do things like keyframing, color correction, effects, transform etc.
I certainly am not trying to portray myself as a newbie, whilst secretly having years of experience. I honestly only just started and I hope you can take me at face value.
Just wanted to clear that up.
Again thanks everyone for your support and well wishes. Perhaps some day I can repay some of that to the group.
cheers
Wiz

First contact with project nile.

hey!
I've written a tiny javafx app which is a [screen ruler|http://www.superduper.org/personal/blog/wordpress/?p=111] which required quite some lines of code.
To shorten it i made my first contact with project nile and i'd like to sum up my experience.
First of all - i watched a few screencasts and it looked really promosing. I instantly installed and exported some graphics. So far so easy, but as soon as I wanted to use the .fx file that was created i got tons of "class .... " not found and "package loader.fxd...." not found. I wasted at least half and hour to figure out that i have to add the javafx-fx.jar file (how come this isn't mentioned in any screencast? or did just I miss this?). Ultimately I figured stuff out, but have a few things i don't like a lot and i think are worth mentioning.
#1 why does it create so many png files? wouldn't it be possible to just inline the binary data?
#2 why do i need that javafx-fxd.... jar file? i really don't want to include a 500k library on a 1k source project.
#3 why multiple files at all? i'd prefer if <my-export-name>.fx was the only file created and needed.
ok, back to netbeans now...
have a great day!
Edited by: hansiraber on Sep 20, 2008 6:41 AM [because there was a typo]

Hello,
thanks for your feedback and sorry about installation problems. Regarding your questions:
#1 why does it create so many png files? wouldn't it be possible to just inline the binary data?The Nile release 1.0 which is planned for end of October will do exactly what you are asking for. Export will create one file, a kind of archive, that will contain the scene description and binary assets like fonts and images.
#2 why do i need that javafx-fxd.... jar file? i really don't want to include a 500k library on a 1k source project.Agreed. We try to make it smaller and eventually the Nile runtime should become part of JavaFX SDK.
#3 why multiple files at all? i'd prefer if <my-export-name>.fx was the only file created and needed.There is a significant distinction between the files <my-export-name>.fxd and <my-export-name>UI.fx. The fxd file contains graphic content and can be used alone as it is. It is preferred for a static content. However if the graphic is "live" and some interaction with code is required then the fx file is useful. We call it UI stub and it serves as an connection link between JavaFX script application logic and 'significant' visual elements. This stub also hides the complexity of the purely visual graphic elements and exposes only the nodes that are used from application logic to create dynamic behavior.
Best regards,
Pavel

Finished my first "big" project with FCPX

Now I am not a big time editor. If anything I am FCPX new "target audience". This was about 3 hours of footage hacked up in to (40) 2-5 minute projects with output to YouTube. My results.
Pros
When things were working they worked well. Being I was semi forced to do a little better keywording, favoriting, and marking (since I can not put the old in and out point on my clips) I found, in the long run, it was easier to hunt down and find things.
Getting used to the magntic time line was not as bad as I envisioned. Use of compound clips and gaps makes your life a bit easier
Some of the simple tools worked well. I made good use of the "loudness" enhancement (Improves the main audio signal and makes it more uniform). the hum and "noise" not as much success.
Cons
Can I get my find white color dropper back? The auto color works well only sometimes. Luckily I had a lot of good lighting. Color correction while better in a way with the color panel I would still like to start with what I think white is.
I do not know if it is a memory leak or just too many things open inside Final Cut but you will burn every drop of memory on your system (I have 16 GB) and then you will start swapping like crazy. When I started seeing a lot of beachballs I would shut FC down and go back to work for a few hours till it happened again. There were times it would type a title like I was on a 300 baud modem.
I lost at least 6 projects. I did not have a crash or anything. I would just exit at night and come back in the A.M. (or after a forced stop/start because of memory issues) and they would be gone. Not totally gone. My original "master skeleton project" would be there. FYI: The way I created my project was to have a Motion Project that was exported out into a QT movie then I added some music and a gap. Created a compound clip. That was my title bumper. Next a Gap with a generic title on it with the style and font I wanted over the gap. Then an image with some flying text around it for the exit bumper. I used this as the "master project" and would duplicate it, change its name, drag in and replace the gap with the appropriate clips. Alter and reposition the title. Done. So, for the love of God! Fix autosave or let me click a [SAVE NOW] button.
If there is background processing going on you can't rename a Project. Get your Project (re)naming done before your editing
You can get ahead of the renders and shares. If I had 2 or 3 shares going on in compressor and was 2 or 3 projects along with no renders on any of the projects you will get to a point where your system is so slow you will just get up and let it do whatever it needs to do. Hey I understand that. But pop a Window up or something like, "Time for coffee. I have rendering to do."
Every Project shows it has changed after the export with that radar icon yet I have not changed a thing
Sometimes I would set an out point for my range on a clip. It would keep playing yet the frame would be stuck on the out point
All and all not horrible for .0 software but unacceptable for "Pro" software. I will be going back to FCP7 for my next project where I know I will not lose work so easily.

Daniel,
Thanks for taking the time to provide a very insightful and detailed summary, but I have to disagree with you about one thing:
>All and all not horrible for .0 software but unacceptable for "Pro" software
Apple calls this version 10 and it so obviously isn't "Pro" by any stretch of the imagination. Apple has duped every purchaser into being their alpha tester since this product isn't even ready for beta testing. And to add insult to injury, they're charging $299.00 for the privilege of testing.
-DH

How do I create a NetBeans project with multiple JavaFX (FXML) dialogs?

I'm very new to Java and JavaFX, so forgive what is probably a question asked a thousand times, but I can't seem to find the answer.
I come from a Visual Studio (C# with WPF) background. I'm used to creating a Solution then adding a Project for each dialog/window that gets included in the Solution. Each dialog/window is a class derived from Window, and I simply create an instance of that class when I need to use the dialog.
What I need to do is have a main window (stage) that contains two lists of participants (a red team and a blue team).
Then I need a separate dialog for entering the information for the participant. So when a button on the main stage is pressed ("Add Red Participant"), I want to open the ParticipantDialog. When the "OK" or "Close" button on the Participant dialog is clicked, I want the dialog to be able to return a participant object to the main stage.
Then the main stage adds that participant to the appropriate list.
What I've gathered so far is that I will be creating an FXML file for the Participant dialog (and I assume an associated controller). Then when the "Add" button is pressed, I will call an FXMLLoader to load that FXML dialog. Something like this:
FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("ParticipantDialog.fxml"));
Scene scene = (Scene)fxmlLoader.load();
final Stage participantDialog = new Stage();
participantDialog.setScene(scene);
First question is: is that correct so far? Am I at least on the right track?
Next question is: how or where do I create the FXML and controller files for the participant dialog using NetBeans? Should I create a separate project to make the participant dialog and then copy those files over, or is there a way to make the files within the parent project? And if I make the participant dialog in a separate project, what's the easiest way to access it from my main stage?
I feel like I'm missing something simple here because this seems a lot harder than it should be.
Thanks in advance for any advice.

> is that correct so far?
Yes the sample code you have is fine to launch a new dialog when your Add button is pressed .
> I create the FXML and controller files for the participant dialog using NetBeans?
You can edit FXML text in NetBeans, but I think that is kind of tedious.
You might want to create the FXML using SceneBuilder.
You can use SceneBuilder in NetBeans.
You may want to get it working without FXML first.
For example, use the JavaFX scene graph API, then convert your program to use FXML once you are more comfortable with the JavaFX system.
The piecemeal approach cuts down on the amount of learning you need to do at one time.
> Should I create a separate project to make the participant dialog and then copy those files over.
No.
Just use a single NetBeans project.
You will have separate FXML files for your main stage and your participant dialog, but they will both be placed in the same NetBeans project.
> is there a way to make the files within the parent project?
In NetBeans 7.3.1, do the following:
File | New Project | JavaFX | JavaFX FXML Application
This will create a sample project with a sample fxml file.
Modify the sample project files to get what you want, changing the sample fxml to your main stage fxml and adding a new participant fxml to the same directory.

How can i use a breakpoint on the first project ?

This is a screenshot of my solution with two projects.
But the breakpoint will work only on the second one the TestScreenshot but i want to be also to use a breakpoint/s on the Capture project. Tried to make that the Capture will be scope Scope to This but it didn't change anything.

It's not in a release mode.
The first project the upper one the Capture is set to class library and Active (debug) Active (Any cpu) Any cpu
The second project the TestScreenshot is windows application Active (debug) Active (Any cpu) Any cpu
I can use a breakpoint/s on the TestScreenshot but can't use breakpoint/s on the class library project.

How to find out the projects with status "Invalid"?

I'm new to Oracle Projects -OP. We are on 12.0.4. This' my new job.
I have a task of "Remove projects with status 'Invalid' ".
Questions:
How to access the OP forms to verify the existent of the invalid projects?
What are the PA tables having the status info -- I mean those showing the status with 'Invalid'?
Thanks A lot.
an apps dba

I could not find a sample for the DELETE_PROJECT. I have coded the delete project by modifying the sample of the CREATE_PROJECT.
-- delete a project with the status INVALID shown in pa_project_statuses.project_status_name
--set serveroutput on size 20000
DECLARE
-- Variables needed for API standard parameters
l_api_version_number          NUMBER := 1.0;
l_commit               VARCHAR2(1) := 'F';
l_return_status          VARCHAR2(1);
l_init_msg_list          VARCHAR2(1) := 'F';
l_msg_count               NUMBER;
l_msg_index_out          NUMBER;
l_msg_data               VARCHAR2(2000);
l_data               VARCHAR2(2000);
l_pm_product_code          VARCHAR2(10);
l_responsibiity_id          NUMBER;
l_user_id               NUMBER;
l_pm_project_reference     PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
l_pa_project_id          PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
API_ERROR               EXCEPTION;
BEGIN
-- GET GLOBAL VALUES
select user_id, responsibility_id
    into l_user_id, l_responsibiity_id
    from pa_user_resp_v
   where user_name = 'J23N';          -- need to get from Apps
--SET GLOBAL VALUES
    pa_interface_utils_pub.set_global_info(
    p_api_version_number     => 1.0,
       p_responsibility_id     => l_responsibiity_id,
       p_user_id          => l_user_id,
    p_msg_count          => l_msg_count,
       p_msg_data          => l_msg_data,
       p_return_status          => l_return_status);
-- PRODUCT RELATED DATA
l_pm_product_code := 'R_INVALID';           -- can be user defined
-- PRODUCT DATA (PROJECT_IN_REC_TYPE)
   l_pm_project_reference.pm_project_reference := null;
   l_pa_project_id.pa_project_id := 1001;
--INIT_CREATE_PROJECT
--pa_project_pub.init_project;
dbms_output.put_line('Before delete_project');
--DELETE_PROJECT
pa_project_pub.delete_project(
     p_api_version_number => l_api_version_number,
     p_commit                    => l_commit,
     p_init_msg_list         => l_init_msg_list,
     p_msg_count                => l_msg_count,
     p_msg_data                  => l_msg_data,
     p_return_status         => l_return_status,
     p_pm_project_code       => l_pm_product_code,
p_pm_project_reference => l_pm_project_reference,
p_pa_project_id         => l_pa_project_id
-- Check for errors
if l_return_status != 'S'
then
    raise API_ERROR;
end if;
dbms_output.put_line('Deleted Project Id: ' || l_pa_project_id.pa_project_id);
--dbms_output.put_line('Deleted Project Number: ' || l_project_out.pa_project_number);
Commit;
--HANDLE EXCEPTIONS
-- Get the error message that were returned if it did not complete sucessfully
EXCEPTION
When API_ERROR then
    dbms_output.put_line('An API_ERROR occurred');
    if l_msg_count >= 1
    then
      for i in 1..l_msg_count loop
        pa_interface_utils_pub.get_messages(
          p_msg_data      => l_msg_data,
          p_encoded     => 'F',
          p_data           => l_data,
          p_msg_count      => l_msg_count,
          p_msg_index_out => l_msg_index_out);
        dbms_output.put_line('error message: ' || l_data);
      end loop;
      rollback;
    end if;
When OTHERS then
    dbms_output.put_line('An error occured, sqlcode = ' || sqlcode);
    if l_msg_count >= 1
      then
      for i in 1..l_msg_count loop
        pa_interface_utils_pub.get_messages(
          p_msg_count      => l_msg_count,
          p_encoded     => 'F',
          p_msg_data      => l_msg_data,
          p_data           => l_data,
          p_msg_index_out => l_msg_index_out);
        dbms_output.put_line('error message: ' || l_data);
      end loop;
      rollback;
    end if;
END;Can anyone with the experience of PA_PROJECT_PUB make comment on this Delete Project block? On the struncture level is it correct?
I run it and get
pa_project_pub.delete_project(
ERROR at line 48:
ORA-06550: line 48, column 3:
PLS-00306: wrong number or types of arguments in call to 'DELETE_PROJECT'
ORA-06550: line 48, column 3:
PL/SQL: Statement ignored
Please make your comment on the structure (the logic) of the delete project before providing the advice on the debug.
I would like to make sure the logic is correct first.
TIA

New install of NWDS. Build error on creation of first project

Hi,
NWDS has just been installed. The first project I've created is essgbpdata, on the initial build I'm getting these errors.
I have jsdk1.4.2_19 installed.
Any help appreciated.
DC Model check:
   All used DCs are available locally
   validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
   validating dependency to public part "default" of DC "sap.com/tc/col/api"
   validating dependency to public part "default" of DC "sap.com/tc/cmi"
   validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
   validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
   validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
   validating dependency to public part "default" of DC "sap.com/tc/logging"
   validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
   validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
   validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
   validating dependency to public part "default" of DC "sap.com/com.sap.exception"
   validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
   validating dependency to used DC "sap.com/pcui_gp/xssfpm"
   validating dependency to used DC "sap.com/pcui_gp/xssutils"
   validating dependency to used DC "sap.com/ess/per"
   DC model check OK
Preparing data context..
No public part descriptor found for component "tc/col/api" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/cmi" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/ddic/ddicruntime" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/ddic/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/wd/webdynpro" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/logging" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/wdp/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.aii.proxy.framework" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.aii.util.misc" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.exception" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.mw.jco" (vendor "sap.com"), public part "default", using legacy mode.
No 'default' JDK defined, will use running VM.
Data context preparation finished in 0.172 seconds
     [wdgen] [Info]    Generating packages/com/sap/xss/hr/per/gb/personal/model/Hcmt_Bsp_Pa_Gb_R0002.java
     [wdgen] WARNING: Metadata of component VcPerPersonalGbDetail is not valid! ComponentUsage "//WebDynpro/Component:com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail/ComponentUsage:FcPersInfo", Role "UsedComponent": A minimum of 1 object(s) is required
     [wdgen] WARNING: Metadata of component VcPerPersonalGbReview is not valid! ComponentUsage "//WebDynpro/Component:com.sap.xss.hr.per.gb.personal.review.VcPerPersonalGbReview/ComponentUsage:FcPersInfo", Role "UsedComponent": A minimum of 1 object(s) is required
     [wdgen] WARNING: Metadata of component VcPerPersonalGbOverview is not valid! ComponentUsage "//WebDynpro/Component:com.sap.xss.hr.per.gb.personal.overview.VcPerPersonalGbOverview/ComponentUsage:FcPersInfo", Role "UsedComponent": A minimum of 1 object(s) is required
     [wdgen] WARNING: Metadata of component FcPerPersonalGb is not valid! ComponentUsage "//WebDynpro/Component:com.sap.xss.hr.per.gb.personal.fc.FcPerPersonalGb/ComponentUsage:FcPersInfo", Role "UsedComponent": A minimum of 1 object(s) is required
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> Component VcPerPersonalGbDetail: Has invalid component usage 'FcPersInfo'
     [wdgen] [Error]   .FutureDay: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .FutureDay.isRadiobuttonVisible: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextValueAttribute isRadiobuttonVisible [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   .FutureDay.As_of_radiobutton: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .FutureDay.As_of_radiobutton.Value: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextValueAttribute Value [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   .FutureDay.As_of_radiobutton.Text: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextValueAttribute Text [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   .FutureDay.As_of_radiobutton.isBegdaVisible: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextValueAttribute isBegdaVisible [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   .Subtypes: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextModelNode Subtypes [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   .Subtypes.Subtype: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .Subtypes.Case: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .Subtypes.Stext: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .Default_Begda: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextModelAttribute Default_Begda [referencedProperty]: The context model attribute has not been bound to a model property
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextModelAttribute Default_Begda: Context model attributes which are defined as top level attributes have to be mapped to attributes of other controllers.
     [wdgen] [Error]   .Begda: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextValueAttribute Begda [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   .Endda: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> ContextValueAttribute Endda [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.VcPerPersonalGbDetail --> Component VcPerPersonalGbDetail [FcPersInfo]: Component usage has no used component
     [wdgen] [Warning] com.sap.xss.hr.per.gb.personal.detail.DetailView --> Controller DetailView: Found orphaned translatable text "Back button" not belonging to any development object (Hint: Execute "repair texts" action for project WebDynpro)
     [wdgen] [Warning] com.sap.xss.hr.per.gb.personal.detail.DetailView --> Controller DetailView: Found orphaned translatable text "Cancel button" not belonging to any development object (Hint: Execute "repair texts" action for project WebDynpro)
     [wdgen] [Warning] com.sap.xss.hr.per.gb.personal.detail.DetailView --> Controller DetailView: Found orphaned translatable text "Next button" not belonging to any development object (Hint: Execute "repair texts" action for project WebDynpro)
     [wdgen] [Error]   com.sap.xss.hr.per.gb.personal.detail.DetailView --> TextView TextView_83 [text]: Context element and property are not compatible
     [wdgen] [Info]    com.sap.xss.hr.per.gb.personal.detail.DetailView --> TransparentContainer Space [Children]: Container does not contain children
     [wdgen] [Warning] com.sap.xss.hr.per.gb.personal.detail.DetailView --> Label Gender_Label [labelFor]: Value is not valid
     [wdgen] [Info]    com.sap.xss.hr.per.gb.personal.detail.DetailView --> TransparentContainer Space_12 [Children]: Container does not contain children
     [wdgen] [Info]    com.sap.xss.hr.per.gb.personal.detail.DetailView --> TextView TextView_83: UIElement does not have a label
     [wdgen] [Info]    com.sap.xss.hr.per.gb.personal.detail.DetailView --> TextView Name_Data_Title: UIElement does not have a label
     [wdgen] [Info]    com.sap.xss.hr.per.gb.personal.detail.DetailView --> TextView HR_Data_Title: UIElement does not have a label
     [wdgen] [Info]    com.sap.xss.hr.per.gb.personal.detail.DetailView --> TextView Marital_Status_Title_Label: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (0 seconds)
Error: C:\Documents and Settings\rradam\.dtc\0\DCs\sap.com\ess\gb\pdata\_comp\gen\default\logs\build.xml:97: [Error]   Generation failed!
                at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:254)
                at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
                at org.apache.tools.ant.Task.perform(Task.java:364)
                at org.apache.tools.ant.Target.execute(Target.java:341)
                at org.apache.tools.ant.Target.performTasks(Target.java:369)
                at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
                at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
                at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
                at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
                at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
                at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
                at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                at java.lang.reflect.Method.invoke(Method.java:324)
                at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
                at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
                at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
                at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
                at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
                at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
                at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
                at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
                at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
                at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Ant runtime 2.062 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!

Try Repair -> project Structure and ClassPath
When you say "The first project I've created is essgbpdata"
I believe you refer to first importing project DC from NWDI.
Then you are creating the project...right ?
If yes, then have you set proper dependencies in NWDI ?
refer to SAP note : 872892

A sample project with basic problems to solve. Lets make it as a tutorial!

The project is attached it's supposed to end up being a simple file manager, so you can browse the files and folders using the list component.
I've done some part which is the attached one. Now I meet some problems since it's my first project and I need some help so I can solve them. I will try to make this project available to everyone because I think in it's end it will really cover the basics you need to know to get started making more complex stuff.
So I zipped the php folder with just 1 file that currently has script for browsing the current directory. At this stage of the development I would only like to be able to make the files and folders that the php returns to be displayed correctly in the list, the files no icon and the folders with the folder.png icon. To have a nice padding so they look good in the list and have a nice hover.
Problems:
1) warning: unable to bind to property 'name' on class 'Array' (class is not an IEventDispatcher)
Note: that's the first problem you will see when you setup the project, change the php server urls and run it.
http://flexponential.com/2009/11/11/binding-warnings-when-using-object-in-a-list -dataprovider/ - this post has some info on the problem but the example is with static mxml data and I am not sure how to fix this when the data comes from the php.
2) what's the proper way to make some customizations on the data received, so to speak I need to check if the type of the file is "dir", that would mean it's a folder and should display the folder icon and if it's not not to display any image infront of the file. I am really not sure how to do that so any solutions are welcome.
3) What's the most convinient way to adjust the padding between each line in the list and padding for the icon and label inside the line.
I think solving these 3 problems will be a huge step forward to finish and have a complete structure which could help more people understand how things work.
Everyones help will be greatly appreciated

Anamorphicizer didn't work.
I can use Quicktime Pro cause I currently have Quicktime X on my computer (snow leopard) which doesn't have a Pro upgrade.
Any myDVDedit is really confusing to use do I have to export the DVD into a VIDEO_TS file to fix it? I'm still puzzled

First Day With Adobe SpeedGrade CC with Direct Link

I thought it would be interesting to share my first day using the new Adobe SpeedGrade CC with everyone. Most would be embarrassed to do this, not me.
This is NOT a tutorial, but more of a way to show you what I am struggling with and what I like. So if you are having your first day with this program you might run in to similar items.
Perhaps even a product manager from Adobe might watch this and help him what they should work on next.
Issues I had:
Where are the Curves adjustments?
How do I sharpen an image?
Can you use the tracker backwards?
Why didn’t my track work?
Playback at 10fps (not real time with my Monster Computer)
How do you blend layers?
How do you zoom into the timeline?
Things I love:
Doesn’t crash like Resolve
DIRECT LINK!!!! Love it!
2 up and 3 up for shot matching.
No more XML and EDL!!!!

Dave,
I'm basically a noob here too ... only been working with this for what, 5 months?
Yea ... would LOVE the option to switch to a curves-based control, one each for luminosity/R-G-B at the least. I've put in a feature-request for that, as have apparently some others. Maybe next year in ... oh well.
Also ... you might have noted, there's no skin line in the vectorscope! Ridiculous, and that's ALSO been feature-requested by people ... again, maybe next year in ... oh well.
Still ... but dang this program does work fast in concert with P-Pro as your NLE. One bit of advice. In a P-Pro/Sg/Ae workflow, the link from/to P-Pro and Speedgrade works perfectly well both ways. HOWEVER ... your Sg grades do not come into Ae if you send the project from P-Pro to AfterEffects. Now ... if you save your P-Pro projects with it's Sg grades ... then open Ae and use its Dynamic Link feature to pull a P-Pro project into Ae, your grades from Sg come in just fine thank you.
And anything you do in Ae comes into Sg on a different layer that you aren't allowed to 'touch', so you can do fx work afore grading and see how the footage looks including the fx, but you can't touch the fx layer of the timeline (other than to turn on/off visibility in the monitor) to do anything to it.
Still ... easy workarounds, NO time to transcode/export/import ... glory hallelujah!
Neil

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

Multiple Quizzes in a project with Branching

Hello,
I am creating a project with branching - based on some
criteria, a user will take a path that will not bring them back to
a common quiz at the end. Each path should have its own quiz in the
end. How do I make only one of the quizzes' results to be counted
on the LMS?
For example, the course is about a certain process and based
on my role, at some point I will choose a path that teaches me how
to do my part of the process. At the end, I will be asked questions
for my part only and I want to see the scores on the LMS only for
that one quiz.
Thank you!

Hi.
I'm very interested in the branch-awareness feature.
Here's my scenario (in a nutshell).
People are attending ONE event out of 4 in different geographic locations. A, B, C, D.
Each event has several sessions that are elective. People can go to any combination of sessions they'd like within those available at the event. Let's say sessions X, Y, Z for simplicity's sake.
Each session has a series of questions to test retention. Let's say questions *1, *2, *3 for now.
All in ONE quiz file.
1. Learners access the quiz and its introduction page.
2. Choose the first event, in this case event C.
3. Land on the event C landing slide that contain links to first questions of each session.
4. Select session Z.
5. Land on first question of event C, session Z.
6. Answer (submit) questions Z1, Z2, Z3 from that session CZ.
7. Go to the event C main menu (upon submitting the Z3 question and "continue"). This is an alternate event C menu that contains a slight modification: now a "Those were all the sessions I attended, take me to the quiz results page] + links to other sessions branches for event C.
8. Depending on the choice on step 7, learner chooses another session's series of questions OR is taken to the final quiz results page. Score is computed at an 80% passing score ONLY counting the questions that HAVE been answered, not all the other questions in sessions not attended.
Does this make sense? Will it work on Captivate 6 via branch-aware quizzing?
Thanks.

In P6 version7 not able to copy project with the baseline.

Hi,
In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
Please help.
regards,
Baber.

Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
https://discussions.apple.com/thread/1398462?start=0&tstart=0
Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

First project with 16:9 film

Similar Messages

Maybe you are looking for