First Report Total should be second report row

Hi
We are using OBIEE11g.My requirment is first report total should be second report one of the values(row).
E.g
Report1
Jan
100
Feb
1000
Mar
6000
Total
7100
Report2
US
1000
GB
1200
SG
4000
Other
900
Total
6200
6200
Final Total
7100
Above example Report1 Total(7100).Reports2 other values(First Report total-Seconde Report Total)(7100-6200=900).So Other values of second report is 900.Now final total of Second report 7100.
I dont want to display second report First time total(6200).I have to display like below
Report2
US
1000
GB
1200
SG
4000
Other
900
Total
7100
How can i achive this.?
Thanks
Gram

Hi,
1. Their must be a relationship between these 2 reports by any one of the columns from the tables.
2. After completing the second report, right click on the answer side of pivot table view, you will get the options like exclude column, include column, etc..
3. Use selection steps to create calculated items or group of calculated members to have a value of "Other".
4. One you added the calculated item it will get display.
use selection steps or right click on the columns in pivot table view or table view you will get more options and ideas.
Regards,
VG

Similar Messages

  • Can I change the reort total: text in the summary row in a report region?

    Hi all,
    This might has been asked before, I tried searching the forum but couldn't find an answer. In the report attribute, if I tick the sum checkbox then run the page, the last row would give me the summary numbers which is what I want. However is there a way I can change the "report total" text in the last row of the first column?
    Thanks very much for your time.
    Pete

    Hello user9546327,
    I had the same problem, until I realised that the text seems to be printed under the first column of the report. If that one is a hidden column, the text won't be printed in the report.
    Solution:
    In the 'Report Attributes' tab, move the first visible column (= attribute 'Show' is ticked) to the top of the report columns.
    Best regards,
    Sabine

  • Report Row With Detail (IFRAME)

    Hi,
    I am trying to implement the Report Row with Detail but not successful.
    I have gone thru the various threads in the forum.. but i am unable to
    get it. It would be great if I could know the step by step process to do the same.
    I have created two regions. The first region (the query to it) also
    has a show_region link.. I have copied and pasted the javascript given
    by Carl.
    Thanks,
    shilpa.

    Hello,
    Ok then you are almost there so when you submit the form to update your data on a sucessful save you are going to create a plsql region that just uses htp.p() to write out the javascript to update the report in the main page.
    a simple example would be something like this.
    Lets say I'm getting back values to update the two first table cells on my parent report.
    <script>
    /*set up call back function*/
    function ReportRowUpdate(){
    var lRow = parent.g_LastRowOpened; /* hook to last row clicked */
    lRow.cells[0].innerHTML = 'SOME VALUE FROM DATABASE 1';
    lRow.cells[1].innerHTML = 'SOME VALUE FROM DATABASE 2';
    /*call call back function*/
    ReportRowUpdate();
    </script>
    And that should be it.
    Carl
    Message was edited by:
    Carl Backstrom

  • Report Row Template - header

    Hi
    I have made a custom "Report Row Template". I have write the "header" direct in the html code. Is that a problem if i want to translate the application? Is there a way how to use the headers from the apex?
    Best Regrads
    Jesper Vels

    Hello Jesper,
    OK, I can see now what you are trying to do. Unfortunately, the only similar example I'm familiar with - http://apex.oracle.com/pls/otn/f?p=11933:108 – Is also using hard coded text for the headings.
    I can show you how to get to these headings, and how to use them on your template, but I'm afraid this is not a generic solution, as I couldn't find an active substitution string for the column headers.
    As there isn't any variables to hold these column names, we need to define our own. You can do that using an application items or hidden page items. Let's say I defined three hidden items on my report page: P1_HD1, P1_HD2, P1_HD3. Each item will be defined with Source Type of SQL Query, and Source Use of "Only when …". The Source Value for the first item will be as follow:
    select  heading
    from  FLOWS_020200.APEX_APPLICATION_PAGE_RPT_COLS
    where  APPLICATION_ID=:APP_ID and
           PAGE_ID=:APP_PAGE_ID and
           DISPLAY_SEQUENCE = 1;The DISPLAY_SEQUENCE should change according to the sequence of the column.
    If you choose to use an application items, you'll need to use a before header computation on your report page, with the same query, to populate the application items.
    In order to use these items in the report template, we need to use the "&P1_HD1." notation. You can have something like this, for the first header in your report query:
    <tr><td>&P1_HD1.: </td><td>#1#</td>   . . .Hope this helps,
    Arie.

  • Very intermittent missing page regions / report rows / page item values

    My goals in making this posting are twofold:
    1. I'm looking to see if anyone else has experienced this type of issue before.
    2. I'm looking for ideas about what can be done to debug such an infrequent bug with serious implications.
    Synopsis
    I'm having a weird problem where very infrequently I will load a page and I'll notice that one or more page regions, report rows, or page item values are missing. If I reload the page the missing parts appear as they normally should.
    By "very infrequently" I would say it happens to me somewhere between 1 in 100 and 1 in 1000 page loads, of course at my last project demonstration in happened twice in 10 minutes to my demo participants. I've attempted to debug this, but most of the techniques I know of involve reloading the page or reposting the form data and (of course) everything looks fine then.
    Environment
    * This has happened on multiple different pages, under ApEx 3.1 (Linux) and 3.2 (Solaris).
    * I believe that so far I've only ever seen this under Firefox 3/3.5 under OSX, but since I do the vast majority of my development with this browser it's not reasonable to conclude that it only happens under Firefox.
    Logs
    * No application errors during this timeframe.
    * Nothing of significance in the database alerts log (just thread notes and log sequences).
    * Nothing of significance in the webserver log (just the usual mod_ossl connection errors).
    Thanks for your attention,
    Jason
    Edited by: Jason G on Jul 24, 2009 12:43 PM

    Well, thanks for reading the post anyway.
    While working through some debugging steps I realized that I was populating some of the regions as the page rendered using AJAX -- this would pause the page rendering until the AJAX request returned. I believe that a hanging AJAX call was the likely culprit of the very intermittent symptoms I was seeing.
    I moved the AJAX calls to the last region of the page and added a javascript function that "watches the page load" by checking for regions by ID and looking at javascript boolean flags to let me know when the page is fully rendered. If this process takes longer than 5 seconds it notifies the user that something happened and offers to reload the page for them in an effort to fix the issue.
    So far, so good -- but it will take a lot of testing to convince me that this case is solved. I hope my documenting this is helpful for others in similar situations.
    Good luck,
    Jason

  • Custom report row template

    Few questions when using a custom report row template. Followup to the discussion Report Row Template: Column condition
    1. The row template allows full control how the entire row is rendered. I can see this being used when the report query returns a single row and we need to format it in a very specific way. But when the query returns multiple rows, how is the specified Row Template used? i.e the first row is "consumed" and rendered as per the template. If the same process is repeated for subsequent rows, how can we control whether successive rows are rendered across the page (left to right) or down the page (top to bottom)?
    2. When a custom row template is used to render a tabular form, the hidden columns (marked Edit=Y, Show=N on Report Attributes) are present in the markup even when they are not specified in the row template! i.e. the MRU process works. Of course, this is a good thing but I was curious to know what exactly controls this, what part of the report template controls where the hidden form elements are placed?
    3. Any number/date formatting specified declaratively on the Column Attributes page appears to be taken into account when column values are substituted in the template using #COL# notation. But all the other Column Attributes are ignored (alignment, sum, show, link, etc). Is there a way to use the Link attribute to declaratively specify the link so the value of the column #COL# as seen by the report template includes the A tag?
    Thanks

    Comments? Thanks

  • Report row highlight based on a page item

    Is there a way to highlight a report row based on the value of a page item?
    In my case I have a report where the application user requests data in a detail report using a column link in the master report. This loads an id number from my report into a page item (say :P8_ID for example). If this item is null, I want the report rows to all render normally (nothing is selected or the detail report has been closed). If there is an id in that field then I want the row containing the information about that item to highlight (its column link has been clicked selected it to bring up a detail report).
    At first glance, this looks similar to Vikas solution (Change the Report row color when clicked but I am trying to make the connection between what has already been done and where I need to be.

    After looking back, I discovered my value was being set after the report rendered. When I re-organized my calculations and the rest, it worked.

  • Report row with detail (AJAX)

    Hi,
    In Carl's report row with detail (AJAX) demo, is there any way to show all detail row by default when the page is loaded?
    http://apex.oracle.com/pls/otn/f?p=11933:13
    Thanks.
    Andy

    Hi Andy,
    In Carl's example, the "details" content seems to be from a table that has a one-to-one relationship with the main table. If this is the case, you would probably find it easier to use a "Named Column (row template)" type of report template and lay out the report as you need it rather than use Ajax
    Otherwise, I'm sure it would be possible to loop through a report and make a series of Ajax calls to retrieve the details should there be multiple records required.
    Andy

  • How can I create multiple selection check boxes in a report row?

    Hello,
    I'd like to know how a multiple selection checkbox can be created in report rows. In brief, I need to create a questionnaire template and each one of the questions will have multple options checkboxes, that means that the user can select more than one of the answers.
    Should I use apex_item.checkbox ?. I have no clue here.
    Please advice.
    Thank you
    Edited by: user9982480 on Jul 23, 2012 10:58 AM

    Hi,
    This might save your effort
    http://www.apexsolution.de/questionnaire/
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • Conditional Formatting for Report Rows based on page item

    Hi,
    I have a report and a page item on a page. I would like to somehow highlight any report rows where a particular column in the report (e.g. "Customer_ID") matches the page item (e.g. P2_CUSTOMER_ID).
    Any idea how to do this?
    Thanks,
    Forrest

    You can also achieve this by jquery ( Please note - I just started learning jquery , so my way of doing it may not be a good way of doing it)
    1. Download jquery from [http://www.jquery.com]
    2. In Page Header enter
      <script type="text/javascript" src="#WORKSPACE_IMAGES#jquery.js"></script>
       <script type="text/javascript">
       $(document).ready(function(){
          //t20data is the class for table cells in theme 20 .. change it as per you theme - right click view source and find it
             x = $('.t20data').length;
         //i=7 is the column index of customer id
        // i = i + 10 , 10 is the number of column
           for( i = 7 ; i < x ; i=i + 10)
                if($('.t20data').eq( i ).html() == $x('P2_CUSTOMER_ID').value)
                    // i-7 is the first cell of row and i+2 is the last cell of row 
                    for( c = i - 7 ; c <= i + 2 ; c++)
                         $('.t20data').eq( c ).css("background","red");  
    </script>[ E X A M P L E | http://apex.oracle.com/pls/otn/f?p=62171:1]
    Regards,
    Shijesh

  • How to loop through classic report rows?

    Hi,
    I have a page that has a classic report region. Can I somehow loop through the rows in the report result?
    If I put a checkbox item in the query then using this works fine, but I would not like to add checkbox I just would like to loop through the records.
    FOR I in 1..APEX_APPLICATION.G_F02.COUNT LOOP
    Do something with record having  checkbox item value APEX_APPLICATION.G_F02(i);
    END LOOP;
    TIA,
    Tamas

    Andy,
    What I would like to do is to let the user click a report row, then navigate to a detail form page and display detailed information of the given report row. And should the suer decide to have a look at all the records, then let him/her click a next button on the detail form and display the next row in the report result on the detail form.
    Thanks for the tip. if there is no other way, I will probably do this way.
    Tamas

  • Call first report in another report and download the ouput of first report

    Hi Experts ,
    Ther is 1 ALV Report which gives ouput.
    i need to call first report in second report and copy the output of first report to itab in second report and download that itab to excel in second report.
    Pls if anybody knows the solution reply as soon as possible.
    regards,
    Imran

    Moderator message - Cross post locked
    Rob

  • Report Row Height and Column Width

    Hi,
    I have a cell in a report (a description column) that causes the row height to become very large (when there is a lot of text in the description). I can make the column wider on the report attributes page, but there doesn't seem to be any place to influence the maximum height of a row on a report, short of modifying the template.
    Adding style attributes (e.g. max-height:30px) to an element only affects the <span> that the element resides in, not the table cell or row.
    Displaying the column as a text area is a useful workaround. The downside is the border and scroll bars do waste a lot of screen real estate. Does there exist some other way of setting a limit on the height and/or width of a report, report column or report row?
    Oh, and another question- how do make line breaks in this forum? There's no support for <BR> or [br].

    Please reply to this thread, my customer is facing the same issue. He does not have issue with the excel and the pdf output but in the rtf output the table heght increases to accomadate the data.He want it to bevave in the same way as the pdf do.
    Regards,
    Ajay

  • Report Row With Detail (AJAX) by Carl - How to implement?

    I just had a look at Carl's example place and I'd like to implement his Report Row With Detail feature. But how, it's made up of 3 sections:
    1. a query
    2. javascript
    3. application process
    The query on which the report is based and where I want this feature is:
    select leverancier, artnr, vendorcode from plijst where productgroep = :p1_assortiment_tree or subgroep = :p1_assortiment_tree
    A break is defined on Leverancier
    I understand the query and the application process part. But where goes the Java part???
    Peter
    Message was edited by:
    Pete

    Tried to upload your example application, unfortunately it does not seem to upload properly in my APEX v2.0 environment
    Can you please confirm if your example works with APEX version 2
    and does the Javascript go in the Page Header or Region Header/ Footer area
    thankyou
    Frank

  • Report Row With Detail (IFRAME) - How to reload Main Page within iFrame

    Hi,
    Based on Carl's example - Report Row With Detail (IFRAME), i.e:
    http://htmldb.oracle.com/pls/otn/f?p=11933:17
    Within my scenario, I have a button within the iframe section of my report that calls a pl/sql process that performs some database processing.
    What I basically need is a means of performing a page refresh of the main page, when this button within the iframe is pressed. In Carl's example, that would be page 17.
    As mentioned, I call a PL/SQL process within the iframe, but unsure how to then refresh the main page - parent page.
    Any help would be appreciated.
    Thanks.
    Tony.

    Tony,
    you could insert the following script to the region footer of a region located on your "iframe"-page.
    <script>
    parent.location.reload();
    </script>
    But this is dangerous because everytime the parent is being reloaded, the iframe is loaded, too. Risk of loop...
    A possible solution is to conditionally display a html region (with the script) on your iframe-page basing on a request. You could post the request as a result after your plsql processing in a branch.
    Regards,
    Jens

Maybe you are looking for