First Request to BlazeDS is VERY slow. why?

Hi guys,
When I executing first RPC via AMF on my blazeDS from flex it's so slow. It's take about 10s (!)
Each next request is executing much faster, I didn't benchmark it but I'm sure it's less than 0.5s
I'm beggining in flex/blazeDS/java development so please be patient.
My web server is 6.0.14
JVM 1.6.0_17-b04
BlazeDS 3.2.0.3978
it's my first post
Regards,
Beynar

Hello Beynar,
Which Servlet container are you using? Most likely the problem you are experiencing comes from caching and other configuration derived from container's settings.
Sadly, I'm also experiencing similar problem in performance. Currently, using Glassfish and switching to Tomcat.

Similar Messages

I using 4s and upgrade new version IOS8 but my unit is very slow why?

I using 4s and upgrade new version IOS8 but my unit is very slow why?

And how I can get lower version. I need to be lowerversion because IOS7 is very smooth on my unit.

Firefox was fast when I first started using. Now, very slow to open and freezes often. Frequent message is "Warning-unresponsive script". Do I need to switch back to Internet Explorer?

Switched from Internet Explorer because seemed slow. Firefox was fast at first. Then upgraded to Firefox 4 and frequently have trouble opening. Sometimes page doesn't open, or is very slow. If I try to open again I will get Mozilla Firefox Unresponsive or a message that say "Warning-Unresponsive Script". Often have to restart and do the whole thing again. Don't really want to switch back to Internet Explorer, but getting tired of taking a half hour to get into my emails!

I am having the same problem, but not sure what's causing the slow down. Restarting in safe mode fixes the performance problem... but disabling all plug ins and extensions in normal mode (and restarting firefox) still shows the bug. Any ideas?

TS4002 icloud mail appears to be very slow.why?

icloud mail appears to be very slow today,why?

I spoke to Apple also. They confirmed that the problem is on their end. They put my account into "trouleshooting mode", issued me with a temp. password and told me it should be fixed by Wednesday of next week. I did not hold back on expressing my disastisfaction with how long it would take them to fix - email being critical to my business.

On opening up PSE9 it runs very slow, Why?

When I open up my recently installed PSE9 program it runs very slow. all photos etc load up and are visable but it almost feels like there is a program running in the background. The cursor moves very slow and in a delayed way. I mostly have photos and very few videos, projects etc but just in case I go to view and uncheck vidoes, PDF, projects etc just in case this is what is slowing everything down but it doesn"t change anything. Nothing else is running while I am in PSE. Previuosly I was working with version 8 and I did not have this problem. Can someone help me with this this annoying problem that is keeping me from using PSE 9. Thanks Rey

You really don't provide enough information for anyone to help
How to ask a question http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all programs
2 - 320G WD Win7 swap file and video projects
3 - 1T WD all video files... read and write
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And, finally, the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions

Why first time loading ReportViewer object very slow

I am interested to know why the first time .net applaction loading the ReportViewer object so slow. It might take over 60s. Is this a performance issue or we need preload the object?

Hello Steve,
if you view a report for the first time the report viewer needs to load all dlls needed to connect to the database and to render and display the report. These dlls stay in memory a certain time afterwards.
That is why the report takes much longer to display the first time.
Falk

Contacts app is very very slow; why?

With my Z1, searching for contacts was very fast. It was real-time as I type the characters.
With my Z2, it is unacceptably slow. It can be a few minutes to search for contacts. Even when I go to Favouites where I have only eight contacts, the page takes a while to load. When I go to Contacts and search for a contact it can take a few minutes for the contact to be found. Then, when I select that contact, it can take a few minutes again to display the content.
Why is that?
Yes, I have many contacts (maybe 4,000+) and many are duplicates linked from Exchange and LinkedIn. But even when I turn off Auto-Sync, it can still be unacceptably slow.
And I don't keep many apps open at the same time.
What are the possible things I can try?
Thanks,
CWL88

I'm afraid it's not possible to disable the online search. Even if you disable synchronization of contacts it will still search against the server. I will forward this as feedback internally but currently you would need to remove the ActiveSync account to stop online search. A workaround may be to use another client instead like Moxier, RoadSync or Nitrodesk.
The more contacts you have the longer it will take to load all contacts if it's no longer stored in RAM. You can force contacts to stay in RAM but to avoid it being closed, close other apps when you're not using them by pressing the lower right icon and swipe them away. But Z2 has 3GB RAM so usually this is not needed but it depends on what other apps you have any how much RAM they use.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Time Capsule: First backup over ethernet is very slow

My understanding is that a direct ethernet connection between my Imac and Time Capsule would make the initial backup process faster, but I did not notice any improvement whatsoever and the first backup is proceeding veeeeeeery slow. I was wondering if there was something I was missing when I connected by cable.
Thank you for your help!

Felix,
The first backup I did was wirelessly and it was slow.
So, I erased the TC Hard Disk and hooked it up via ethernet.
It went much faster.
I was doing about 1.1 GB every 5 minutes using ethernet.
Joseph Kriz

Java virtual machine very slow: why?

Since I have upgraded Tiger to Leopard, the startup of the Java virtual machine is unbelievably slow: for example, just executing java -version for the first time requires almost one minute. This happens only the first time the JVM is started: after that, everything seems to work properly. Any idea of what is the problem? Thank you.

I don't have this problem at all.
Which version of Unix are you using? And which version of Java are you using on the Unix computer? How old is your Computer?

When is Apple going to fix the problems with IOS8 Safari either won't work or is very slow.why can't you contact Apple themselves rather than this method?

ssince updating my IPad to IOS8 Safari does not work properly ie Marriott website it tells me no server is available yet Google works and other web search have the same problem when is Apple going to get fixes out soon I hope.Also why can't we contact Apple direct on this matter ?

Try some basic troubleshooting steps. Clear Safari, force close the app and reset the iPad.
Go to Settings>Safari>Clear History, Cookies and Data.
In order to close apps in iOS 8, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
There re are ways to contact Apple directly. Look here for help.
Contact Apple for support and service

Intercompany is very slow, why and how to improve?

Hi All,
I have installed intercompany 1.1 PL3 in B1882 PL12 with SQL2008R2.
there are two questions : one is performance issue while another is performance logic
Firstly, I placed an PO to vendor which is a branch (global BP) on Monday morning then I can't have SO draft being created until one day later.
Does anything got stuck? how can I tune up the process?
Secondly, after I place an PO to vendor (branch B) and SO has been created in branch B, will the corresponding SO be updated if any change to original PO? Will the original PO be updated if any change made in corresponding SO?
Are there any references or document I can read?
Thanks for any help.
Hellen

Hi LC,
In the eventsender setup,
you copy the EventFilterList from c:\.....\sap\Business One Integration\EventSender\eventsenderconfig into Event Filter, and restart the eventsender.
Also refer to the Agneesh' comments.
regards,
Hellen

SSAS ProcessAdd: ProcessAdd only one row to a big dimension(100 minion records) is very slow, Why?

I'm using the xmla to add a custom dsv to doing processadd, in my testing, only process add 1 row to a big dimension(already has more than 100minion rows) will cost more than 10 mins. bellow is the test enviorement:
DimensionTable: TestDimension with only one column PKey, which is the identity key, type is int.
Test machine: Vitual Machine, Windows Server 2012+SSAS 2012. the machine has 64G Memory and 8 cores CPU.
Does anyone can tell me why processadd only 1 row cost so much time? what does the SSAS do when processadd a dimension. i want internal explanations. Using profiler tool, i found many read data, is this a bug with SSAS? does it need read all the dimension
data to rebuild the dimension structure or level or index?

Hi Hong,
According to your description, you want to know why processadd only 1 row cost 10 minutes, right? ProcessAdd sound like a useful option (faster than ProcessUpdate, less impact than ProcessFull etc) but when you try and use it you will find it is not as straightforward
as the others. Here is a blog which explain the ProcessAdd option deeply, please refer to the link below.
SSAS - ProcessAdd explained
Regards,
Charlie Liao
TechNet Community Support

First export test in CC, Very Slow

So, I made a test with a 1:30 min. sequence.
In CS6 the export time is 00:03:52
In CC: 27:43!!!!!
Exactly the same sequence, same export settings, both via Media Encoder CS6 & CC respectly.
What could be the problem?
Title was changed to be more clear. Rendering and exporting are not the same thing. Message was edited by: Kevin Monahan

I ran some more tests. Here's what I have so far:
Windows 8 Pro 64 bit
i7 2500
8GB DDR3 1333 RAM
1TB HD (single drive)
GTX 560 Ti 2GB, 320.18 driver
CUDA acceleration turned on in both versions
I imported a 4 minute AVCHD clip with a lot of action. I created a sequence based on that clip. I exported that clip with no edits or effects to BD and DVD settings identical in both versions.
Using AME for Export:
CC7_BD = 5:58
CS6_BD = 5:43 <---Winer CS6
CC7_DVD = 3:07 <---Winner CC7
CS6_DVD = 3:12
Using Direct Export
CC7_BD = 5:49
CS6_BD = 5:40 <---Winner CS6
CC7_DVD = 1:39 <---Winner CC7
CS6_DVD = 2:55
So, it looks like MPEG2 is faster with CC7 and H.264 is faster using CS6. The biggest difference is for DVD using CC7. Look at the times for AME and Direct, nearly cut in half!
Now it should be noted that a brand new project was started in each version. I've seen reports of older projects opened in CC7 behaving slowly, so I wanted to take that into account. And in fact my first test was done opening an older project, Harm's 5.5 benchmark project, in fact. So far, it's looking like where the project was created makes a difference. Of course, Harm's project was full of effects, and this round of tests used none at all. That's the next step, repeating these tests with effects, both accelerated and not.

First mac ever... very slow internet and difficulty

mac book pro brand new tonight. I have a Sprint Mifi 220 wireless card. I have had card for about a year. I have to go back int the airport everytime to connect to internet. I did not have to do this with my dell. and it is slow as ****..

Sprint's card compatible with Macs?

My queries in Forms a very slow - why

Hi all,
I've created a data-block in Forms based on a view. The view based on a join between 2 tables and returns round about 1 Million entries.
When i press my button:
go_block('v_talrep_re_positionen');
execute_query
... and a WHERE-Statement.... to reduce the amount of records...
then i want Oracle to execute the query and to show the result.
When I execute this query with SQLPlus or TOAD then I get a result within 5 Minutes. When I execute this query with my forms-application then I must wait 20 Minutes and more.
Which possibilities do I have to optimize Forms for executing queries fast and faster...
Do you have any idea?
bye
Florian

Hi Florian,
try to use hints in the view;
e.g. select /*+ RULE */ name
from emp
Sometimes it helps.
Regards,
Monica

First Request to BlazeDS is VERY slow. why?

Similar Messages

Maybe you are looking for