First scenario using CIDX adapter

Dear Friends,
I am new to CIDX adapter scenarios.
my scenario is transferring the Bank payment details to target system using b2b.
please tell me how to do this scenario.
Regards,
Shalini Shah.

Hi,
Check these
Chem XML Message eStandards and CIDX Scenario development Part II
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/e123410046d349e10000000a1550b0/frameset.htm
Regards
Seshagiri

Similar Messages

BPM patterns for using CIDX adapter

Hi,
I am trying to implement the below requirement and am having problems doing that. Any help or pointers would be appreciated.
Requirement:
We need to send an order create message from file system A to
Elemica(using CIDX adapter) asynchronously and capture the RA back and
convert it into a message and send it to a file system B.
I tried the below scenarios already and could not maker it work:
<b>Scenario 1</b>: I tried creating a scenario using Sync- Async bridge, but
it did not work as I need to send some response back to the File system
A. In this case I do not have any response to send.
I created an external definition for RA and used it for mapping to the
File system B interface.
CIDX adapter is not accepting any messages if we try to send
synchronously.
<b>Scenario 2</b>: I could not make my scenario work if I am trying to create
in my SWCV. So, I created all my abstract
interfaces for my business process in the CIDX SWCV. Now I created
Async Sync scenario by sending a synchronous order create request to
Elemica. It did not work as CIDX adapter does not support any
synchronous messages( guessing).
Apart from the above questions, I have few additional questions:
1. Can we send synchronous messages to Elemica through CIDX
adapter? If so, how do we configure our communication channel as
only Asynchronous option is available.
2. If we have File-Elemica-File scenario, how do we configure the
scenario?
3. Are there any blogs having scenarios with BPM involving CIDX
adapter? If so, pls send a link.
Thanks in Advance,
GP

Hi
Try this
check the following link for information on configuring CIDX Adapter http://help.sap.com/saphelp_nw04/helpdata/en/29/cb22419e2ab167e10000000a155106/plain.htm
And on specifically on Single-Action responder directly on http://help.sap.com/saphelp_nw04/helpdata/en/0a/cb23412546ef6fe10000000a1550b0/content.htm
Thanks

Sample Scenarios using JVM Adapter

Dear Experts,
Can you Pls provide me some Stap-by-Step Sample Scenarios using 'JVM' Adapter ?
I will be thankful to you for your great contribution
Cordially
Barkath Shaik

try this
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/u/34500 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
JMS Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
/people/sravya.talanki2/blog/2006/11/23/error-handling-framework-xiout-of-the-box-episode-2
/people/sravya.talanki2/blog/2006/11/23/error-handling-framework-xiout-of-the-box-episode-2
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
Thanks

Flat File to Flat File Scenario using File Adapter

Hi Experts,
In my scenario, requirement is Flat File to Flat file through File Adapter in PI. At sender end, we would need to use Sender File Adapter (NFS) and receiver end we would need to use Receiver File Adapter (FTP). File would be coming as a encrypted format, and the file needs to be sent in encrypted format.
Any idea how to proceed with this requirement would be helpful.
Thanks and Regards
Soumya

Hi Soumya,
You need to choose the FTP in the "transport protocol" option. Then in the FTP connection parameters choose the option Connection Security and assign the value "FTPS for control and Data Connection". Then the "Command Order" will show up below that option and you could leave the default value itself. If you are using Public private key certificates of X.509 then you could choose the option "Use x.509 certificate for client authentication" and assign the values to the "keystore" and "certificate & private key" fields.
Note: To use the FTP with SSL you need to add the CA certificate to the TrustedCAs keystore view.
Regards,
Vishnu.

How to create a scenario using RFCsender adapter

Hi,
I'd like to create an RFC to RFC scenario. Just for a test. I can use receiver RFC adapter, but I don't know, how the sender one works. I even can't understand how to call it. Using the receiver side - I import RFC's metadata and call the FM. No problem with this. But what about the sender side? Should I create an empty FM, and int's importing parameters will be my Outbound interface, and exporting parameters my inbound interface (in case of a sync scenario)? If yes, when I call this FM, how does it know, that it should not run the (empty body?) of the function, but send the request to XI using RFC connection?
Thank you for clarification,
Olian

Hi,
How to Trigger BAPI From R3 ToXI
/people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
RFC Sender
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
How to test the RFC to Flat File scenario
Regards
Seshagiri

Acknowledgement for asynch scenario using SOAP adapter

Hi,
My scenario is SOAP to proxy asynchronous (using PI 7.1)
Sender is able to send the messages to XI using HTTPs protocol (SOAP adapter). since this is an asynchronous scenario XI could not send back any application acknowledge .
I understand if handshake is successful sender can see HTTP code 200 which is success.
1) Is it possible that though HTTP connection is successful and sender could not pass payload.
2) Is there any configuration needs to be done in PI 7.1 to send an acknowledge back to assure the sender that XI received payload.
3) Can we do the above using non BPM scenario.
or if BPM scenario is mandatory.
Thanks in advance.

Hi Vamsi,
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header/>
<SOAP:Body/>
</SOAP:Envelope>
above acknowledgement is seen on SOAP UI as soon as SOAP UI delivers the message to the PI (irrespective of what will happen with the message in the PI).
As you know in case of Async scenario Application Ack is not possible !
But if you want to be sure if payload is received successfully the you can use BPM wherein you can have a switch which will check the existance of payload. and as per your requirment you can take a decision.
Thanks,
Sunil Singh

Problem with Send using JMS Adapter with Websphere MQ

Hi,
We have two scenarios using JMS Adapter with MQ:
1. File->PI->MQ
This works fine and drop the file in MQ correctly.
2. MQ->PI->File
This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
Our PI version is 7.0 SP 13
Websphere MQ Version 6.0.
Any idea what could be wrong?
Cluster Node Administration Information Availability Times
Cluster Node Details for Channel CC_JMS_MQ_Sender
Short Log
In the Last 4 Hours Server 0 15_92786
_Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
Line 1 / 1
Processing Details for Cluster Node Server 0 15_92786
Type
Time Stamp
Message ID
Explanation
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d'; _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
Amith Dharmasiri

Checked the drivers installed in :
/usr/sap/<SID>/DVEBMGS<SYSNO>
/j2ee/cluster/server0/bin/ext/com.sap
.aii.af.jmsproviderlib
They are available and properly added to aii_af_jmsproviderlib.sda.
The drivers are:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
These were installed per OSS note 747601.
Any other suggestions, why retrieving from MQ doesn't work?

Triggering an HTTP to file scenario using UDF

Hi,
Is it possible to trigger an http to file scenario from UDF? If it is possible can anyone tell me how it can be acheived.
regards,
Meenakshi

hi,
can u tell me how this could be possible?
my requirements are such that we are collecting some data in UDF and creating an xml. this xml is sent to another scenario using HTTP adapter. this adapter need to be triggered from the UDF.
please let me know how this can be done.
regards,
meenakshi

Alerts for a scenario in Advanced Adapter Engine

We have done an end to end scenario using advanced adapter engine in PI 7.1.
We have created an alert to give info abt an error which mite occur.
Do alerts work for messages which dont go to integration engine as the alert category is taken from abap stack?

Yes you can have alert mail/ message with AAE....just select where the error occured as Adapter Engine.

XI scenarios using Sender RFC Adapter

Hi Forum,
I am eager to know what kind of XI scenarios use sender RFC Adapter, can u give an example,
does this mean........executing a RFC in a R/3 system and the result of the execution goes to XI.....or,
does this means, like a sender JDBC Adpter, from XI, triggering execution of a RFC on a R/3, and getting back the result into XI............
can i have a step by step blog to create such a scenario....
thanks and regards

Hi Sudeep,
Sorry for late reply.
Yes the 2nd reply was for receiver RFC.
1. As i mentioned To configure Sender RFC you need TCP\IP connection. in that connection you will use the option registered server program and will mention a program ID there.
2. Sudeep just remember, please configure RFC sender on XI side first and give a Program ID there, gateway service, host and login of your R3 system. Program id can be any string your name also. and please dont forget to activate the channel before going to R3 side.
3. Then configure RFC in R3 side, and mention that same program id. mention your gateway host as R3 name or IP and you can get the gateway service from Tcode smgw. it must be something like smgw<xx>.
and for ur information the program id is nothing but an identity on which basis the R3 system will search that which server object is active using that program id.
4. when you will write a report to execute that RFC in background, use Commit work as last statement.
Please let me know if you want any further information.
Rewrds if found helpful,
Regrds,
Alok

Info about CIDX adapter with a scenario

Hi all,
Can any one help me out by giving ino about *CIDX* adapter: Where its used and how its used with an example scenario
In a nutshell complete info about CIDX
I would be very gartefull
Thanx in advance

Hi Prabhakar,
CIDX Adapter is Chemical Industry standard for data exchange in B2B scenarios. It uses XML formatted in different manner specific to Chemical industry.
In order to use this, you need to purchase the license.
There are xml schemas provided by CIDX for each transaction like Order Create, Order change, shipping instruction etc..
You need to download the once which are required in your scenario and use the same.
For overview of CIDX in general you can visit http://www.cidx.org

Receive XML file from CIDX adapter and Post to SAP as IDoc using XI

I have scenario where we will receive the xml file from CIDX adapter. I need to take the xml from CIDX, do the Database Lookup and post it to SAP as IDoc.
Any technical documentaion or step-by-step process documents can be very helpfull to me, since I am new to XI
Thanks
SP

Lookup in XI is used to call the target data storage system and get data from there to your mapping programme.
In XI you can do Lookup in Message Mapping, Java Mapping and in XSLT Mapping. Previously Lookup in XI was system dependent. But now what ever the system are i.e. SAP system or non-sap system(Oracle,MS SQL etc) lookup API are same.
Overview of Lookup
- Lookups are used to identify/request the data from mapping program.
- It interrupt the process and looking for data which was stored in target system.
- It get that data and comeback to process and continue with that data.
Types of Lookups in XI
- JDBC Lookup: JDBC lookup is used for accessing data from database (non SAP).
- RFC Lookup: RFC lookup is used for accessing the SAP Data.
- SOAP Lookup: SOAP lookup is used for accessing data from Webservice
Steps to perform Lookup in Mapping
Import package com.sap.aii.mapping.lookup.*;
Create connection to the target Database system.
// Determine communication channel created in ID
Channel channel = null;
channel = LookupService.getChannel("DB-SYSTEM-NAME","DB-CHANNEL-NAME");
// Get system accessor for the channel.
DataBaseAccessor accessor = null;
accessor = LookupService.getDataBaseAccessor(channel);
Build the Query String.
Getting Result
// Execute Query and get the values.
DataBaseResult resultSet = null;
resultSet = accessor.execute(Query);

Reg: CIDX Adapter and Scenario

Hi! Gurus,
I need one help from you. Here I got a task that I need to work on CIDX Adapter using PI.7.1 Server and also on CIDX Enhancements. But really I donu2019t have any idea regarding CIDX except that it was an Industry speaking scenario for chemical industries. I searched in SDN and some other links but I didnu2019t found any exact document based on that topic.
Kindly provide any document regarding CIDX Adapter and also if possible any documentation that is having regarding the design and configuration steps on CIDX Scenario so that I will appreciate you if you do this help.
Regards:
Amar Srinivas Eli

hi Amar,
you didn't search a lot did you?
Chem XML Message eStandards and CIDX Scenario u2013 Part I
Chem XML Message eStandards and CIDX Scenario Part I
Chem XML Message eStandards and CIDX Scenario u2013 Part II
Chem XML Message eStandards and CIDX Scenario development Part II
Regards,
Michal Krawczyk

Error while using soap adapter in webservice to sap system scenario

Hi everybody,
i got the error while using saop adapter in scenario(sender webservice----->sap system)
error is
HTTP error:couldnot post file
'/XISOAPAdapter/MessageServlet:Channel=:BS1:SPA.&
version+3.0&sender.Service=BS1&interface=http%3ASP%5OUTBOUND'on server 'XI03'(500)

check with ur basis people

I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to customer. Can you please help me on the same?

HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastav

Hi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish

First scenario using CIDX adapter

Similar Messages

Maybe you are looking for