First single-boot Linux, in the future multi-boot after addition of Windows

The given hardware setup is 32Bits Pentium 4 with blank SATA HDD and BIOS. GPT is in seek on that HDD, not MBR. As next it will be setup to single-boot system with Linux. Means amongst others the disk is to be partitioned.
However it is unclear if Linux will satisfy the user of this system. It will show in middle or long term if the satisfaction is present or not. Therefore the plan B is in setup now as well. It means, should it in the future turn out that user will have Windows
instead of Linux indeed, such a OS will be added to this system - means in no way a replacement - a smooth transition only accepted, a transition which surely need some extent of time. It will be added in the multi-boot fashion, not as VM - due to quite vintage
hardware state. Let's assume in such a case the Windows 8.1 will be taken.
As for current stage of works - means the disk partitioning - which measures of precaution must be met now in order to make such and system extension in the future possible? Just to leave a free space on disk for needs of future Windows installation? Must the
reservation be made in specific disk regions or no matter? Is it necessary for this reason to create now a partition of specific type, with specific properties? Anything else to be considered?
There are lots of articles and howtos in the web regarding multi-boot questions however all they address the reversed situation, first Windows then add other vendor's OS.

Hi,
I agree with BoYans's opinion. MBR style is applied to your computer. If you install Windows after Ubuntu, There are two approaches for you from Ubuntu official website:
One is recovering GRUB after reinstalling Windows.
Another is master Boot Record backup and re-replacement.
For more information and further help, please refer to the official guide and contact Ubuntu support:
WindowsDualBoot
https://help.ubuntu.com/community/WindowsDualBoot
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Similar Messages

  • I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

    Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

    Was your Bootcamp info.plist manipulated to change any options?

  • Windows 7 slow to boot after setting up windows backup to additional drive.

    I have an issue with windows taking forever to boot after setting up Windows backup.
    PC Setup:
    2 Samsung SSD Mirrored for Hardware raid on (MOBO OS/Programs)
    2 Seagate 4TB Mirrored for Hardware raid (Data storage)
    1 Seagate 4tb HD used solely for Windows backup.  (Have also tried with multiple other drives with same outcome.)
    If I have all drives connected without setting up the Windows Backup, system will boot up in 37 seconds.  As soon as I enable the backup to the additional drive, it kills the boot time.  Brings boot time to over 2.5 mins.  Brand new PC, clean
    installation, no antivirus or any other software that could be slowing it down.  If drive is just in PC as an extra drive there seems to be no issue, just as soon as I enable the Windows Backup to additional drive. Never noticed this issue on any other
    PC

    Log booting process (set it in F8 menu).
    Regards
    Milos

  • Laptop not booting after recently installing windows 10

    I have been tryign to boot my pc all morning it just keeps  at the loading screen after  the HP Logo, I recently upgraded to windows 10 its been fine beside a few quirks that been  fine to work with but it  just  wont boot up now. Yesterday it was acting werid as the taskbar  wouldn't let me  do anything but just left click open the  programs I have on the taskbar other then that the taskbar didn't work and now today it just won't boot up! Help please! 

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 15 TouchSmart 15-r137 Notebook and Notebook does not turn on after a Windows 10 upgrade. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Here is a link to computer won't start for Windows.
    Please let me know how this goes.
    Thanks.

  • "first open Acrobat and accept the End User Agreement License" with black window? Cannot open downloaded PDFs

    I have CS5 installed and operating in my MacBook Pro since 2012.
    Several months ago, I ran not an issue where by, when trying to download PDFs from any website, I get the following back screen and message"
    "Before proceeding, you must first launch Adobe Acrobat and accept the End User License Agreement"
    The screen gives me no options to do this and, regardless of what I do, the same window with the same message opens…….
    Does anyone know how to address this? FYI. I can use Acrobat Pro 9 to assemble and create PDFs, this is the ONLY problem that I am dealing with.
    Thanks so much!
    Steve

    Hello Rave!
    Thanks for remembering me!
    No, I was never able to get this to work.
    What I found, however, is that I can view the pdfs normally if I use Firefox instead on my default, Safari…….not much of a fix BUT at least I can access the pdfs now……..I just don't understand why this seems to happen in Safari only………Safari is updated to the latest version via Software Update in Mac OS 10.7.5….
    Thanks again!
    Steve

  • Can't connect to the Hyper-V manager after upgrading to Windows Hyper-V 2012 R2

    I have some Hyper-V server based on the free version (Windows Hyper-V 2012). I want to upgrade to the new version (Windows Hyper-V 2012 R2). So I begin to test it with
    an already working server (aka I was able to totally manager the server remotely without problem) and so upgrade it to the R2.
    After the upgrade, remote management and Hyper-V manager does not work anymore. So I redo my usual configuration steps (enable remote management, open firewall, uses
    latest hvremote.wsf, etc.). I was able to regain access to Computer Manager but not the Hyper-V manager which still can't connect at all. I can't access the Task Scheduler too without having a lot of XML error like "The task XML contains a value which
    is incorrectly formatted or out of range" (see below for screenshot).
    Is there a new step to do to be able to manage Hyper-V 2012 R2 from a Windows 7 computer?
    It's not a network problem as I can access RDP and MMC Computer Manager.
    To be sure the problem is coming from the R2, I have taken an old computer, install Windows Hyper-V 2012, do my usual configuration step, and
    tada: it works perfectly. I can access the Hyper-V manager from my client.
    Technical details:
    - Client is a Windows 7 SP1 x64 English member of a domain with latest RSAT (Windows6.1-KB958830-x64-RefreshPkg.msu).
    - Servers are in a workgroup (not a domain's member). And no, I can't add them to the same domain as the client.

    HI,
    Can we upgrade HyperV 2012 to hyper v 2012 R2.
    Thanks
    Atul

  • Windows 7 x64 Professional does not boot after install

    Hello.
    I created a Windows 7 VM in Windows Server 2012 R2 Standard Hyper-V, all the installation process done successfully, but after installation, it failed to boot and shows a black screen, and didn't boot after it.
    Following is the event log occurs.
    'Win-7_QA-Testing' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID 5B827557-7009-4D83-AA7C-26A45651EC3A)
               VmName
               Win-7_QA-Testing
    VmId
    5B827557-7009-4D83-AA7C-26A45651EC3A
    FailureCategory
    <not a known problem>
    InstructionByteCount
     0
    InstructionBytes
    Rax
    0x10
    Rbx
    0x80
    Rcx
    0x0
    Rdx
    0x80
    Rsp
    0x200
    Rbp
    0x6e08
    Rsi
    0x25da4a
    Rdi
    0x7da4a
    R8
    0x0
    R9
    0x0
    R10
    0x0
    R11
    0x0
    R12
    0x0
    R13
    0x0
    R14
    0x0
    R15
    0x0
    Rip
    0x9d
    Rflags
    0x10002
    FpControlStatus
    7F030000000000000000000000000000
    XmmControlStatus
    0000000000000000801F0000FFFF0000
    Cr0
    0x10
    Cr2
    0x0
    Cr3
    0x0
    Cr4
    0x0
    Cr8
    0x0
    Xfem
    0x0
    Dr0
    0x0
    Dr1
    0x0
    Dr2
    0x0
    Dr3
    0x0
    Dr6
    0xffff0ff0
    Dr7
    0x400
    Es
    0002000000000000FFFF000020009300
    Cs
    00000B0000000000FFFF000000B09F00
    Ss
    0002000000000000FFFF000020009300
    Ds
    0002000000000000FFFF000020009300
    Fs
    0002000000000000FFFF000020009300
    Gs
    0002000000000000FFFF000020009300
    Ldtr
    0000000000000000FFFFFFFF00000000
    Tr
    0000000000000000FFFF000000008B00
    Idtr
    000000000000FFFF0000000000000000
    Gdtr
    000000000000270000002B0000000000
    Tsc
    0x3b48531f8c6
    ApicBase
    0xfee00900
    SysenterCs
    0x0
    SysenterEip
    0x0
    SysenterEsp
    0x0
    PendingInterruption
    0x0
    Any help will be appreciated.
    Thanks

    How many vCPU and how much RAM have you given the VM?
     Are you using alt +F10 and going into the shell to format the VHD and prior to the installation?
    Are you using media that has SP1 slip streamed into it?
    Have you tried forcing the vm off and then back on again?
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    vCPU = 1
    RAM = 2048MB
    No, I haven't try formatting the VHD between the window installation. This is the first time I'm facing the issue. It is a simple windows 7 pre activated iso file, not powered by SP1. I have tried forcing the VM off and ON again, but simply i can't get the
    window screen back. Whenever the VM malfunctioning like this, then it cannot be shut down from the Hyper-V directly, but to make the VM Turn Off manually.

  • The future of Linux looks thin - opinions?

    Matt Asay writes in TechRepublic that instead of a fat, multi-purpose distribution, Linux might evolve into a variety of thin, specialized distributions like CoreOS. What do you think?
    The future of Linux looks very, very thin - TechRepublic
    Rick

    There is an impressive map at http://upload.wikimedia.org/wikipedia/commons/1/1b/Linux_Distribution_Timeline.svg, which shows all the Linux distributions and their offspring. I guess all these distributions had some idea where things should or would be heading. 90 % of these distributions I have never even heard off. If different distributions mean multipurpose, than Linux is the clear winner.
    In terms of providing a universal software solution, multipurpose plays a role in the end user market. Every vendor who sees their share in the desktop market is competing with smartphones and tablet computers, trying to get a piece of the cake. Multipurpose, as far as I'm aware, is historically a Microsoft philosophy. Other vendors, like Apple for instance, rather thought of creating special systems depending on devices. All these vendors will probably have to meet somewhere in the middle.
    The way I see it, Linux enterprise and server installations, and the same goes for all commercial Unix systems, are always optimized installations for a particular hardware, service and purpose. I think server installations are going to be more and more service optimized and multipurpose is going to be replaced by virtualization.

  • How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

    The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
    The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
    pear to be working or at least I am not getting any indication on the inidcator.
    Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
    Attachments:
    regulation_tester_7_loops.vi ‏244 KB

    I didn't really have time to dig in and understand your program in depth,
    but I have a few tips for you that might things a bit easier:
    - You use local variables excessively which really complicates things. Try
    not to use them and it will make your life easier.
    - If you flowchart the design (very similar to a dataflow diagram, keep in
    mind!) you want to gather data, calculate a value from that data, store the
    calculation in an array, and loop while the time is in a certain range. So
    theres really not much need for a sequence as long as you get rid of the
    local variables (sequences also complicate things)
    - You loop again if timepassed+1 is still less than some constant. Rather
    than messing with locals it seems so much easier to use a shiftregister (if
    absolutely necessary) or in this case base it upon the number of iterations
    of the loop. In this case it looks like "time passed" is the same thing as
    the number of loop iterations, but I didn't check closely. There's an i
    terminal in your whileloop to read for the number of iterations.
    - After having simplified your design by eliminating unnecessary sequence
    and local variables, you should be able to draw out the labview diagram.
    Don't try to use the "insert into array" vis since theres no need. Each
    iteration of your loop calculates a number which goes into the next position
    of the array right? Pass your result outside the loop, and enable indexing
    on the terminal so Labview automatically generates the array for you. If
    your calculation is a function of previous data, then use a shift register
    to keep previous values around.
    I wish you luck. Post again if you have any questions. Without a more
    detailed understanding of your task at hand it's kind of hard to post actual
    code suggestions for you.
    -joey
    "nelsons" wrote in message
    news:[email protected]...
    > how do I create a 1d array that takes a single calculation and insert
    > the result into the first row and then the next calculation the next
    > time the loop passes that point and puts the results in thsecond row
    > and so on until the loop is exited.
    >
    > The attached file is work inprogress, with some dummy data sp that I
    > can test it out without having to connect to equipment.
    > The second tab is the one that I am having the problem with. the
    > output array from the replace element appears to be starting at the
    > index position of 1 rather than 0 but that is ok it is still show that
    > the new data is placed in incrementing element locations. However the
    > main array that I am trying to build that is suppose to take each new
    > calculation and place it in the next index(row) does not appear to be
    > working or at least I am not getting any indication on the inidcator.
    >
    > Basically what I am attempting to do is is gather some pulses from
    > adevice for a minute, place the results for a calculation, so that it
    > displays then do the same again the next minute, but put these result
    > in the next row and so on until the specifiied time has expired and
    > the loop exits. I need to have all results displayed and keep building
    > the array(display until, the end of the test)Eventually I will have to
    > include a min max section that displays the min and max values
    > calculated, but that should be easy with the min max function.Actually
    > I thought this should have been easy but, I gues I can not see the
    > forest through the trees. Can any one help to slear this up for me.

  • I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • How to find the First block....in a multi block form

    hi
    How i can find which is the first block in a multi block form....
    ( there are n number of forms with multi blocks...so
    i need to generalise the code to find the first block in all of
    the forms)
    regards
    Kris

    If you searched in the on-line help for "First", you would find that the Get_Form_Property built-in provides two: First_Block and First_Navigation_Block.

  • The future is open, the future is linux ...

    http://www-3.ibm.com/e-business/doc/con … odigy.html
    a really cool spot (i recomend downloading the 8MB version and watching in fullscreen mplayer)
    enjoy
    impressions?

    Toth wrote:...
    It is, at the least, nice to see a large company like IBM publicly show their commitment to the future of Linux and open source.
    yes,  but it's not the only big company behind linux: have a look at the bottom of the www.kernel.org page --- you can find HP there :-)
    ... i heard that there are 3 more spots of ibm for linux ... but i cant find them on the internet (one should have a basketball-player in it --- anyone knows more?)

  • [SOLVED] Arch linux won't boot after pacman -Syu

    So yesterday I upgraded the packages on my system along with installing steam.
    There was one conflicting package but I don't remember exactly what it was (something containing usb?). I just hit Y to continue but in retrospect maybe should have investigated more.
    Now when I start my system it gets up to "Started Accounts Service" and then the rest of the output is on a single line as if the newline characters aren't being printed. It stays like this for around 30 seconds before my graphics cards fans max out and then it reboots the system.
    Any help debugging this would be appreciated.
    Edit: More info in consecutive posts
    pacman -Q:
    a52dec 0.7.4-8
    aalib 1.4rc5-10
    accerciser 3.8.2-1
    accountsservice 0.6.35-2
    acl 2.2.52-2
    acpid 2.0.21-1
    aisleriot 3.10.2-1
    alsa-lib 1.0.27.2-1
    alsa-plugins 1.0.27-2
    alsa-utils 1.0.27.2-1
    anjuta 3.10.2-2
    apache 2.2.26-1
    apr 1.5.0-1
    apr-util 1.5.3-2
    archlinux-keyring 20140220-1
    aspell 0.60.6.1-1
    at-spi2-atk 2.10.2-1
    at-spi2-core 2.10.2-1
    atk 2.10.0-1
    atkmm 2.22.7-1
    attr 2.4.47-1
    autoconf 2.69-1
    autogen 5.18.2-1
    automake 1.14.1-1
    avahi 0.6.31-11
    babl 0.1.10-1
    baobab 3.10.1-1
    bash 4.2.045-5
    bijiben 3.10.2-1
    binutils 2.24-2
    bison 3.0.2-1
    bluez 5.14-1
    boost 1.55.0-4
    boost-libs 1.55.0-4
    brasero 3.10.0-1
    brltty 4.5-6
    bzip2 1.0.6-5
    ca-certificates 20130906-1
    ca-certificates-java 20130815-1
    cabextract 1.4-2
    cairo 1.12.16-1
    cairomm 1.10.0-3
    cantarell-fonts 0.0.15-1
    caribou 0.4.13-1
    cdparanoia 10.2-5
    cdrdao 1.2.3-6
    cdrkit 1.1.11-3
    celt 0.11.3-2
    celt0.5.1 0.5.1.3-3
    cheese 3.10.2-2
    chromaprint 1.1-1
    chromium 33.0.1750.117-1
    cifs-utils 6.2-1
    cloog 0.18.1-2
    clutter 1.16.4-1
    clutter-gst 2.0.10-1
    clutter-gtk 1.4.4-4
    codeblocks 13.12-2
    cogl 1.16.2-1
    colord 1.0.6-1
    colord-gtk 0.1.25-1
    compositeproto 0.4.2-2
    coreutils 8.22-2
    cracklib 2.9.0-2
    cronie 1.4.11-1
    cryptsetup 1.6.3-2
    cups-pk-helper 0.2.5-1
    curl 7.35.0-1
    cython 0.20.1-1
    damageproto 1.2.1-2
    db 5.3.28-1
    dbus 1.8.0-1
    dbus-glib 0.102-1
    dconf 0.18.0-1
    desktop-file-utils 0.22-1
    devhelp 3.10.0-1
    device-mapper 2.02.105-1
    devil 1.7.8-18
    dhcpcd 6.2.1-1
    dialog 1:1.2_20140219-1
    diffutils 3.3-1
    dirmngr 1.1.1-2
    djvulibre 3.5.25.3-1
    dnssec-anchors 20130320-1
    dnsutils 9.9.2.P2-1
    dotconf 1.3-4
    dvd+rw-tools 7.1-4
    e2fsprogs 1.42.9-1
    elfutils 0.158-1
    empathy 3.10.3-1
    enca 1.15-1
    enchant 1.6.0-4
    eog 3.10.2-2
    epiphany 3.10.3-1
    evince 3.10.3-1
    evolution 3.10.4-1
    evolution-data-server 3.10.4-1
    exempi 2.2.1-2
    exiv2 0.24-1
    expat 2.1.0-3
    faac 1.28-5
    faad2 2.7-4
    fakeroot 1.20-1
    farstream 0.2.3-1
    ffmpeg 1:2.1.3-1
    fftw 3.3.3-2
    file 5.17-1
    file-roller 3.10.2.1-1
    filesystem 2013.05-2
    findutils 4.4.2-5
    firefox 27.0.1-1
    five-or-more 3.10.2-1
    fixesproto 5.0-2
    flac 1.3.0-1
    flashplugin 11.2.202.341-1
    flex 2.5.38-1
    fluidsynth 1.1.6-2
    folks 0.9.6-1
    fontconfig 2.11.0-1
    fontsproto 2.1.2-1
    four-in-a-row 3.10.1-1
    freeglut 2.8.1-1
    freetype2 2.5.2-1
    fribidi 0.19.6-1
    fuse 2.9.3-2
    gamin 0.1.10-8
    gawk 4.1.0-2
    gc 7.4.0-1
    gcc 4.8.2-8
    gcc-libs 4.8.2-8
    gconf 3.2.6-3
    gcr 3.10.1-2
    gd 2.1.0-2
    gdbm 1.11-1
    gdk-pixbuf2 2.30.5-1
    gdl 3.10.0-1
    gdm 3.10.0.1-2
    gedit 3.10.4-1
    gegl 0.2.0-10
    geoclue 0.12.99-1
    geoclue2 2.0.0-1
    geocode-glib 3.10.0-1
    geoip 1.5.1-2
    geoip-database 20140108-1
    gettext 0.18.3.2-1
    ghostscript 9.10-3
    giflib 5.0.5-1
    git 1.9.0-1
    gjs 1.38.1-1
    glade 3.16.1-1
    glamor-egl 0.6.0-1
    glew 1.10.0-2
    glib-networking 2.38.2-1
    glib2 2.38.2-1
    glibc 2.19-2
    glibmm 2.38.1-1
    glu 9.0.0-2
    gmime 2.6.18-1
    gmp 5.1.3-2
    gnome-backgrounds 3.10.1-1
    gnome-bluetooth 3.10.0-1
    gnome-calculator 3.10.2-1
    gnome-chess 3.10.3-1
    gnome-clocks 3.10.1-1
    gnome-color-manager 3.10.1-2
    gnome-contacts 3.10.1-1
    gnome-control-center 3.10.2-2
    gnome-desktop 1:3.10.2-1
    gnome-devel-docs 3.10.1-1
    gnome-dictionary 3.10.0-1
    gnome-disk-utility 3.10.0-1
    gnome-documents 3.10.1-1
    gnome-font-viewer 3.10.0-1
    gnome-getting-started-docs 3.10.1-1
    gnome-icon-theme 3.10.0-1
    gnome-icon-theme-extras 3.6.2-1
    gnome-icon-theme-symbolic 3.10.1-1
    gnome-keyring 3.10.1-2
    gnome-klotski 3.10.0-1
    gnome-mahjongg 3.10.2-1
    gnome-maps 3.10.2-1
    gnome-menus 3.10.1-1
    gnome-mines 3.10.1-1
    gnome-music 3.10.1-2
    gnome-nettool 3.8.1-1
    gnome-nibbles 3.10.1-1
    gnome-online-accounts 3.10.2-1
    gnome-online-miners 3.10.3-1
    gnome-photos 3.10.2-1
    gnome-robots 3.10.2-1
    gnome-screenshot 3.10.1-1
    gnome-session 3.10.1-1
    gnome-settings-daemon 3.10.2-3
    gnome-shell 3.10.4-1
    gnome-shell-extensions 3.10.1-1
    gnome-sudoku 3.10.2-1
    gnome-system-log 3.9.90-1
    gnome-system-monitor 3.10.2-1
    gnome-terminal 3.10.2-1
    gnome-tetravex 3.10.1-1
    gnome-themes-standard 3.10.0-1
    gnome-user-docs 3.10.2-1
    gnome-user-share 3.10.1-1
    gnome-video-effects 0.4.0-2
    gnome-weather 3.10.1-1
    gnupg 2.0.22-2
    gnutls 3.2.11-1
    gobject-introspection 1.38.0-1
    google-talkplugin 4.9.1.0-1
    gpgme 1.4.3-1
    gpm 1.20.7-4
    graphite 1:1.2.4-1
    graphviz 2.36.0-2
    grep 2.16-1
    grilo 0.2.9-1
    grilo-plugins 0.2.11-1
    groff 1.22.2-5
    gsettings-desktop-schemas 3.10.1-1
    gsfonts 1.0.7pre44-4
    gsm 1.0.13-7
    gssdp 0.14.7-1
    gst-plugins-bad 1.2.3-1
    gst-plugins-base 1.2.3-1
    gst-plugins-base-libs 1.2.3-1
    gst-plugins-good 1.2.3-1
    gstreamer 1.2.3-1
    gstreamer0.10 0.10.36-3
    gstreamer0.10-base 0.10.36-2
    gtk-update-icon-cache 2.24.22-1
    gtk-vnc 0.5.3-3
    gtk2 2.24.22-1
    gtk3 3.10.7-1
    gtkhtml4 4.6.6-1
    gtkmm3 3.10.1-1
    gtksourceview3 3.10.2-1
    gts 0.7.6-3
    gucharmap 3.10.1-1
    guile 2.0.9-1
    gummiboot 43-2
    gupnp 0.20.10-1
    gupnp-av 0.12.5-1
    gupnp-dlna 0.10.2-1
    gvfs 1.18.3-3
    gzip 1.6-1
    harfbuzz 0.9.26-1
    harfbuzz-icu 0.9.26-1
    hicolor-icon-theme 0.13-1
    hspell 1.2-1
    hunspell 1.3.2-3
    hwids 20130915.1-1
    iagno 3.10.1-1
    iana-etc 2.30-4
    icon-naming-utils 0.8.90-2
    icu 52.1-1
    idnkit 1.0-3
    ilmbase 2.0.1-2
    imagemagick 6.8.8.7-1
    imlib2 1.4.6-1
    inetutils 1.9.2-1
    inputproto 2.3-1
    intel-dri 10.0.3-1
    iproute2 3.12.0-1
    iptables 1.4.21-1
    iputils 20121221-3
    isl 0.12.2-1
    iso-codes 3.44-1
    jack 0.124.1-1
    jasper 1.900.1-10
    jfsutils 1.1.15-4
    jre7-openjdk 7.u51_2.4.5-1
    jre7-openjdk-headless 7.u51_2.4.5-1
    js 17.0.0-1
    json-c 0.11-1
    json-glib 0.16.2-1
    kbd 2.0.1-1
    kbproto 1.0.6-1
    keepass 2.25-1
    keyutils 1.5.8-1
    kmod 16-1
    krb5 1.12.1-1
    lame 3.99.5-2
    lcms 1.19-5
    lcms2 2.5-2
    ldb 1.1.16-1
    ldns 1.6.17-1
    less 458-1
    lib32-acl 2.2.52-2
    lib32-attr 2.4.47-1
    lib32-bzip2 1.0.6-1
    lib32-elfutils 0.158-1
    lib32-expat 2.1.0-1
    lib32-fontconfig 2.11.0-1
    lib32-freetype2 2.5.2-1
    lib32-gcc-libs 4.8.2-8
    lib32-gettext 0.18.3.2-1
    lib32-glib2 2.38.2-1
    lib32-glibc 2.19-1
    lib32-glu 9.0.0-2
    lib32-libdbus 1.8.0-1
    lib32-libdrm 2.4.52-1
    lib32-libffi 3.0.13-1
    lib32-libgcrypt 1.6.0-1
    lib32-libgpg-error 1.12-1
    lib32-libice 1.0.8-1
    lib32-libpciaccess 0.13.2-1
    lib32-libpng 1.6.8-1
    lib32-libsm 1.2.2-1
    lib32-libx11 1.6.2-1
    lib32-libxau 1.0.8-1
    lib32-libxcb 1.10-1
    lib32-libxcursor 1.1.14-1
    lib32-libxdamage 1.1.4-1
    lib32-libxdmcp 1.1.1-1
    lib32-libxext 1.3.2-1
    lib32-libxfixes 5.0.1-1
    lib32-libxi 1.7.2-1
    lib32-libxrandr 1.4.2-1
    lib32-libxrender 0.9.8-1
    lib32-libxxf86vm 1.1.3-1
    lib32-llvm-libs 3.4-1
    lib32-mesa 10.0.3-1
    lib32-mesa-libgl 10.0.3-1
    lib32-pcre 8.34-1
    lib32-systemd 208-2
    lib32-util-linux 2.24-1
    lib32-xz 5.0.5-1
    lib32-zlib 1.2.8-1
    libaio 0.3.109-7
    libanjuta 3.10.2-2
    libao 1.2.0-1
    libarchive 3.1.2-4
    libass 0.11.1-1
    libassuan 2.1.1-1
    libasyncns 0.8-5
    libatasmart 0.19-2
    libatomic_ops 7.2.e-1
    libavc1394 0.5.4-2
    libbluray 0.5.0-1
    libbsd 0.6.0-2
    libcaca 0.99.beta18-2
    libcacard 1.7.0-2
    libcanberra 0.30-4
    libcanberra-pulse 0.30-4
    libcap 2.24-1
    libcap-ng 0.7.3-1
    libcddb 1.3.2-4
    libcdio 0.92-1
    libcdio-paranoia 10.2+0.90+1-2
    libchamplain 0.12.7-1
    libcl 1.1-3
    libcroco 0.6.8-1
    libcups 1.7.1-3
    libdaemon 0.14-2
    libdatrie 0.2.6-1
    libdbus 1.8.0-1
    libdca 0.0.5-4
    libdmapsharing 2.9.23-1
    libdrm 2.4.52-1
    libdv 1.0.0-5
    libdvbpsi 1:1.1.2-1
    libdvdnav 4.2.1-1
    libdvdread 4.2.1-1
    libebml 1.3.0-2
    libedit 20130601_3.1-1
    libevdev 0.6-1
    libevent 2.0.21-3
    libexif 0.6.21-2
    libffi 3.0.13-4
    libfontenc 1.1.2-1
    libgcrypt 1.6.1-1
    libgcrypt15 1.5.3-1
    libgda 5.2.1-2
    libgdata 0.14.1-1
    libgdiplus 2.10.9-3
    libgdm 3.10.0.1-2
    libgee 0.12.0-1
    libgme 0.6.0-2
    libgnome-keyring 3.10.1-2
    libgnomekbd 3.6.0-2
    libgpg-error 1.12-1
    libgsf 1.14.28-1
    libgssglue 0.4-2
    libgtop 2.28.5-1
    libgusb 0.1.6-1
    libgweather 3.10.2-1
    libgxps 0.2.2-3
    libibus 1.5.5-1
    libical 1.0-3
    libice 1.0.8-2
    libid3tag 0.15.1b-8
    libidn 1.28-2
    libiec61883 1.2.0-4
    libimobiledevice 1.1.5-2
    libiscsi 1.7.0-2
    libjpeg-turbo 1.3.0-4
    libkate 0.4.1-4
    libksba 1.3.0-1
    libldap 2.4.39-1
    liblouis 2.5.2-2
    liblqr 0.4.2-1
    libltdl 2.4.2-12
    libmad 0.15.1b-7
    libmariadbclient 5.5.35-1
    libmatroska 1.4.1-1
    libmbim 1.6.0-1
    libmm-glib 1.2.0-2
    libmms 0.6.2-1
    libmng 2.0.2-3
    libmodplug 0.8.8.4-2
    libmp4v2 2.0.0-3
    libmpc 1.0.2-2
    libmpcdec 1.2.6-3
    libmpeg2 0.5.1-4
    libmusicbrainz5 5.0.1-1
    libnautilus-extension 3.10.1-1
    libnice 0.1.4-1
    libnl 3.2.23-1
    libnotify 0.7.6-1
    liboauth 1.0.1-1
    libofa 0.9.3-5
    libogg 1.3.1-2
    libpaper 1.1.24-7
    libpcap 1.5.3-1
    libpciaccess 0.13.2-2
    libpeas 1.9.0-1
    libpipeline 1.2.6-1
    libplist 1.10-1
    libpng 1.6.9-1
    libproxy 0.4.11-2
    libpst 0.6.63-1
    libpulse 4.0-6
    libpwquality 1.2.3-1
    libqmi 1.8.0-1
    libraw1394 2.1.0-2
    librsvg 1:2.40.1-3
    libsamplerate 0.1.8-3
    libsasl 2.1.26-7
    libsecret 0.16-2
    libshout 1:2.3.1-2
    libsigc++ 2.3.1-1
    libsm 1.2.2-2
    libsndfile 1.0.25-3
    libsoup 2.44.2-1
    libspectre 0.2.7-1
    libspiro 20071029-3
    libsrtp 15.1c9bd90-3
    libssh2 1.4.3-2
    libtar 1.2.20-1
    libtasn1 3.4-1
    libthai 0.1.19-1
    libtheora 1.1.1-3
    libtiff 4.0.3-4
    libtiger 0.3.4-3
    libtirpc 0.2.3-2
    libtool 2.4.2-12
    libtorrent-rasterbar 1:0.16.12-2
    libtracker-sparql 0.16.4-1
    libtxc_dxtn 1.0.1-5
    libunistring 0.9.3-6
    libupnp 1.6.19-1
    libusb 1.0.18-1
    libutempter 1.1.6-2
    libva 1.2.1-1
    libvdpau 0.7-1
    libvisual 0.4.0-4
    libvorbis 1.3.4-1
    libvpx 1.3.0-1
    libwacom 0.8-1
    libwbclient 4.1.4-1
    libwebp 0.4.0-1
    libwnck3 3.4.7-1
    libx11 1.6.2-1
    libxau 1.0.8-2
    libxaw 1.0.12-1
    libxcb 1.10-1
    libxcomposite 0.4.4-1
    libxcursor 1.1.14-1
    libxdamage 1.1.4-1
    libxdmcp 1.1.1-1
    libxext 1.3.2-1
    libxfixes 5.0.1-1
    libxfont 1.4.7-1
    libxft 2.3.1-2
    libxi 1.7.2-1
    libxinerama 1.1.3-2
    libxkbcommon 0.4.0-1
    libxkbfile 1.0.8-1
    libxklavier 5.3-1
    libxml2 2.9.1-5
    libxmu 1.1.2-1
    libxpm 3.5.11-1
    libxrandr 1.4.2-2
    libxrender 0.9.8-1
    libxres 1.0.7-1
    libxshmfence 1.1-1
    libxslt 1.1.28-3
    libxss 1.2.2-2
    libxt 1.1.4-1
    libxtst 1.2.2-1
    libxv 1.0.10-1
    libxvmc 1.0.8-1
    libxxf86vm 1.1.3-1
    libytnef 1.5-3
    libzapojit 0.0.3-1
    licenses 20130203-1
    lightsoff 3.10.1-1
    linux 3.13.4-1
    linux-api-headers 3.13.2-1
    linux-firmware 20140123.418320b-1
    linux-headers 3.13.4-1
    llvm-libs 3.4-1
    logrotate 3.8.7-1
    lsb-release 1.4-14
    lua 5.2.3-1
    lvm2 2.02.105-1
    lzo2 2.06-3
    m4 1.4.17-1
    make 4.0-2
    man-db 2.6.6-1
    man-pages 3.59-1
    mash 0.2.0-3
    mcpp 2.7.2-4
    mdadm 3.3-2
    memcached 1.4.17-1
    mencoder 36498-5
    mesa 10.0.3-1
    mesa-demos 8.1.0-1
    mime-types 9-1
    minecraft latest-21
    mjpegtools 2.0.0-4
    mkinitcpio 16-2
    mkinitcpio-busybox 1.21.1-2
    mobile-broadband-provider-info 20120614-2
    mod_dnssd 0.6-4
    modemmanager 1.2.0-2
    mono 3.2.3-2
    mousetweaks 3.10.0-1
    mozilla-common 1.4-3
    mpfr 3.1.2.p5-1
    mpg123 1.18.1-1
    mtdev 1.1.4-1
    mutter 3.10.4-1
    mutter-wayland 3.10.4-1
    nano 2.2.6-2
    nautilus 3.10.1-1
    nautilus-sendto 3.8.1-1
    ncurses 5.9-6
    neon 0.30.0-1
    netctl 1.4-2
    nettle 2.7.1-1
    network-manager-applet 0.9.8.8-1
    networkmanager 0.9.8.8-1
    nspr 4.10.3-1
    nss 3.15.4-1
    nvidia 331.38-3
    nvidia-libgl 331.38-1
    nvidia-utils 331.38-1
    nvidiabl 0.81-2
    openal 1.15.1-1
    opencore-amr 0.1.3-1
    openexr 2.0.1-2
    openjpeg 1.5.1-2
    openresolv 3.5.6-1
    openssh 6.5p1-2
    openssl 1.0.1.f-1
    opus 1.1-1
    orc 0.4.18-1
    orca 3.10.2-1
    p11-kit 0.20.2-1
    p7zip 9.20.1-9
    pacman 4.1.2-5
    pacman-mirrorlist 20140107-1
    pam 1.1.8-3
    pambase 20130928-1
    pango 1.36.2-1
    pangomm 2.34.0-1
    patch 2.7.1-2
    pciutils 3.2.1-1
    pcmciautils 018-7
    pcre 8.34-2
    perl 5.18.2-2
    perl-error 0.17022-1
    perl-xml-parser 2.41-4
    perl-xml-simple 2.20-1
    phantomjs 1.9.7-1
    pinentry 0.8.3-1
    pixman 0.32.4-1
    pkg-config 0.28-1
    pm-quirks 0.20100619-3
    pm-utils 1.4.1-6
    polkit 0.112-1
    poppler 0.24.5-1
    poppler-glib 0.24.5-1
    popt 1.16-7
    postgresql 9.3.3-1
    postgresql-libs 9.3.3-1
    ppp 2.4.5-8
    premake 4.3-3
    procps-ng 3.3.9-2
    psmisc 22.20-1
    pth 2.0.7-5
    pulseaudio 4.0-6
    pulseaudio-alsa 2-2
    pygobject-devel 3.10.2-1
    python 3.3.4-1
    python-atspi 2.10.0-1
    python-cairo 1.10.0-3
    python-dbus 1.2.0-2
    python-dbus-common 1.2.0-2
    python-gobject 3.10.2-1
    python-setuptools 2.2-1
    python-xdg 0.25-1
    python2 2.7.6-2
    python2-atspi 2.10.0-1
    python2-beaker 1.6.4-1
    python2-cairo 1.10.0-1
    python2-gobject 3.10.2-1
    python2-mako 0.9.1-1
    python2-markupsafe 0.18-2
    qbittorrent 3.1.8-1
    qt4 4.8.5-7
    qtchooser 39-1
    qtwebkit 2.3.3-1
    quadrapassel 3.10.2-1
    randrproto 1.4.0-1
    rcm-git v1.2.0-1
    readline 6.2.004-2
    recode 3.6-8
    recordmydesktop 0.3.8.1-6
    recordproto 1.14.2-1
    redis 2.8.6-1
    reiserfsprogs 3.6.24-1
    renderproto 0.11.1-2
    rest 0.7.90-2
    rtkit 0.11-4
    rtmpdump 20131205-1
    run-parts 4.4-1
    rygel 0.20.3-1
    s-nail 14.5.2-4
    sbc 1.2-1
    schroedinger 1.0.11-2
    scrnsaverproto 1.2.2-1
    sdl 1.2.15-5
    sdl_image 1.2.12-3
    seahorse 3.10.2-1
    sed 4.2.2-3
    serf 1.3.2-1
    shadow 4.1.5.1-7
    shared-color-profiles 0.1.5-1
    shared-color-targets 0.1.2-1
    shared-mime-info 1.2-2
    smbclient 4.1.4-1
    snappy 1.1.1-1
    sound-theme-freedesktop 0.8-1
    soundtouch 1.7.1-1
    spandsp 0.0.6pre21-2
    speech-dispatcher 0.8-2
    speex 1.2rc1-4
    spice-gtk3 0.23-1
    spotify 0.9.4.183-3
    sqlite 3.8.3.1-1
    startup-notification 0.12-4
    steam 1.0.0.47-1
    subversion 1.8.5-3
    sudo 1.8.9.p5-1
    sushi 3.10.0-1
    swell-foop 3.10.1-1
    sysfsutils 2.1.0-8
    systemd 208-11
    systemd-sysvcompat 208-11
    t1lib 5.1.2-5
    taglib 1.9.1-1
    tali 3.10.2-1
    talloc 2.0.8-2
    tar 1.27.1-1
    tcl 8.6.1-1
    tdb 1.2.12-1
    telepathy-farstream 0.6.0-1
    telepathy-glib 0.22.0-1
    telepathy-logger 0.8.0-1
    telepathy-mission-control 5.16.0-1
    tevent 0.9.19-1
    texinfo 5.2-2
    tmux 1.9-1
    totem 3.10.1-1
    totem-plparser 3.10.1-1
    totem-plugin 3.10.1-1
    tracker 0.16.4-1
    ttf-dejavu 2.34-1
    tzdata 2013i-1
    udisks2 2.1.2-1
    unixodbc 2.3.2-1
    unzip 6.0-6
    upower 0.9.23-2
    usbmuxd 1.0.8-2
    usbredir 0.6-4
    usbutils 007-1
    util-linux 2.24.1-1
    v4l-utils 1.0.1-1
    vala 0.22.1-1
    vde2 2.3.2-5
    vi 1:050325-3
    videoproto 2.3.2-1
    vim 7.4.135-2
    vim-runtime 7.4.135-2
    vinagre 3.10.2-1
    vino 3.10.1-2
    virtualgl 2.3.3-1
    vlc 2.1.3-1
    vte-common 0.34.9-1
    vte3 0.34.9-1
    vundle-git 0.9.1.56.gf31aa52-1
    wavpack 4.70.0-2
    wayland 1.4.0-1
    webkitgtk 2.2.5-1
    webrtc-audio-processing 0.1-1
    which 2.20-6
    whois 5.1.1-1
    wildmidi 0.3.2-1
    wine 1.7.13-1
    winetricks 20130707-1
    wpa_supplicant 2.0-4
    wxgtk2.8 2.8.12.1-1
    x264 20131030-2
    xbitmaps 1.1.1-2
    xcb-proto 1.10-1
    xcb-util 0.3.9-1
    xcb-util-keysyms 0.3.9-1
    xdg-user-dirs 0.15-1
    xdg-user-dirs-gtk 0.10-1
    xdg-utils 1.1.0.git20140207-1
    xextproto 7.3.0-1
    xf86-input-evdev 2.8.2-2
    xf86-input-synaptics 1.7.3-1
    xf86-video-intel 2.99.910-1
    xf86vidmodeproto 2.3.1-2
    xfsprogs 3.1.11-2
    xineramaproto 1.2.1-2
    xkeyboard-config 2.11-2
    xorg-bdftopcf 1.0.4-1
    xorg-font-util 1.3.0-1
    xorg-font-utils 7.6-3
    xorg-fonts-alias 1.0.3-1
    xorg-fonts-encodings 1.0.4-3
    xorg-fonts-misc 1.0.1-2
    xorg-iceauth 1.0.6-1
    xorg-luit 1.1.1-2
    xorg-mkfontdir 1.0.7-1
    xorg-mkfontscale 1.1.1-1
    xorg-server 1.15.0-5
    xorg-server-common 1.15.0-5
    xorg-server-utils 7.6-3
    xorg-sessreg 1.0.8-1
    xorg-setxkbmap 1.3.0-1
    xorg-twm 1.0.8-1
    xorg-xauth 1.0.8-1
    xorg-xbacklight 1.2.0-1
    xorg-xclock 1.0.7-1
    xorg-xcmsdb 1.0.4-1
    xorg-xgamma 1.0.5-1
    xorg-xhost 1.0.6-1
    xorg-xinit 1.3.3-3
    xorg-xinput 1.6.1-1
    xorg-xkbcomp 1.2.4-1
    xorg-xmessage 1.0.4-1
    xorg-xmodmap 1.0.8-1
    xorg-xrandr 1.4.1-1
    xorg-xrdb 1.1.0-1
    xorg-xrefresh 1.0.5-1
    xorg-xset 1.2.3-1
    xorg-xsetroot 1.1.1-1
    xproto 7.0.25-1
    xterm 301-1
    xvidcore 1.3.2-3
    xz 5.0.5-2
    yelp 3.10.1-2
    yelp-xsl 3.10.1-1
    zeitgeist 0.9.14-1
    zenity 3.10.2-1
    zlib 1.2.8-3
    zsh 5.0.5-1
    zvbi 0.2.33-6
    Thanks!
    Last edited by andm11 (2014-02-23 06:07:40)

    jasonwryan wrote:Pacman's log and the journal would be the first place to look.
    Thanks for the reply, here is my pacman.log:
    [2014-01-25 05:44] [PACMAN] Running 'pacman -r /mnt -Sy --cachedir=/mnt/var/cache/pacman/pkg --noconfirm base base-devel'
    [2014-01-25 05:44] [PACMAN] synchronizing package lists
    [2014-01-25 05:47] [PACMAN] installed linux-api-headers (3.12.4-1)
    [2014-01-25 05:47] [PACMAN] installed tzdata (2013i-1)
    [2014-01-25 05:47] [PACMAN] installed iana-etc (2.30-4)
    [2014-01-25 05:47] [PACMAN] installed filesystem (2013.05-2)
    [2014-01-25 05:47] [PACMAN] installed glibc (2.18-12)
    [2014-01-25 05:47] [PACMAN] installed ncurses (5.9-6)
    [2014-01-25 05:47] [PACMAN] installed readline (6.2.004-2)
    [2014-01-25 05:47] [PACMAN] installed bash (4.2.045-5)
    [2014-01-25 05:47] [PACMAN] installed bzip2 (1.0.6-5)
    [2014-01-25 05:47] [PACMAN] installed gcc-libs (4.8.2-7)
    [2014-01-25 05:47] [PACMAN] installed db (5.3.28-1)
    [2014-01-25 05:47] [PACMAN] installed zlib (1.2.8-3)
    [2014-01-25 05:47] [PACMAN] installed cracklib (2.9.0-2)
    [2014-01-25 05:47] [PACMAN] installed libgssglue (0.4-2)
    [2014-01-25 05:47] [PACMAN] installed libtirpc (0.2.3-2)
    [2014-01-25 05:47] [PACMAN] installed pambase (20130928-1)
    [2014-01-25 05:47] [PACMAN] installed pam (1.1.8-2)
    [2014-01-25 05:47] [PACMAN] installed attr (2.4.47-1)
    [2014-01-25 05:47] [PACMAN] installed acl (2.2.52-2)
    [2014-01-25 05:47] [PACMAN] installed gmp (5.1.3-2)
    [2014-01-25 05:47] [PACMAN] installed libcap (2.24-1)
    [2014-01-25 05:47] [PACMAN] installed gdbm (1.11-1)
    [2014-01-25 05:47] [PACMAN] installed perl (5.18.2-2)
    [2014-01-25 05:47] [PACMAN] installed openssl (1.0.1.f-1)
    [2014-01-25 05:47] [PACMAN] installed coreutils (8.22-2)
    [2014-01-25 05:47] [PACMAN] installed run-parts (4.4-1)
    [2014-01-25 05:47] [PACMAN] installed cronie (1.4.11-1)
    [2014-01-25 05:47] [PACMAN] installed libdbus (1.8.0-1)
    [2014-01-25 05:47] [PACMAN] installed expat (2.1.0-3)
    [2014-01-25 05:47] [PACMAN] installed dbus (1.8.0-1)
    [2014-01-25 05:47] [PACMAN] installed pcre (8.34-2)
    [2014-01-25 05:47] [PACMAN] installed libffi (3.0.13-4)
    [2014-01-25 05:47] [PACMAN] installed glib2 (2.38.2-1)
    [2014-01-25 05:47] [PACMAN] installed kbd (2.0.1-1)
    [2014-01-25 05:47] [PACMAN] installed kmod (16-1)
    [2014-01-25 05:47] [PACMAN] installed hwids (20130915.1-1)
    [2014-01-25 05:47] [PACMAN] installed libgpg-error (1.12-1)
    [2014-01-25 05:47] [PACMAN] installed libgcrypt (1.6.0-2)
    [2014-01-25 05:47] [PACMAN] installed shadow (4.1.5.1-7)
    [2014-01-25 05:47] [PACMAN] installed util-linux (2.24-2)
    [2014-01-25 05:47] [PACMAN] installed xz (5.0.5-2)
    [2014-01-25 05:47] [ALPM-SCRIPTLET] Initializing machine ID from random generator.
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
    [2014-01-25 05:47] [ALPM-SCRIPTLET] :: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
    [2014-01-25 05:47] [ALPM-SCRIPTLET] bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
    [2014-01-25 05:47] [PACMAN] installed systemd (208-10)
    [2014-01-25 05:47] [PACMAN] installed device-mapper (2.02.105-1)
    [2014-01-25 05:47] [PACMAN] installed popt (1.16-7)
    [2014-01-25 05:47] [PACMAN] installed cryptsetup (1.6.3-2)
    [2014-01-25 05:47] [PACMAN] installed dhcpcd (6.1.0-1)
    [2014-01-25 05:47] [PACMAN] installed diffutils (3.3-1)
    [2014-01-25 05:47] [PACMAN] installed e2fsprogs (1.42.8-2)
    [2014-01-25 05:47] [PACMAN] installed file (5.16-1)
    [2014-01-25 05:47] [PACMAN] installed findutils (4.4.2-5)
    [2014-01-25 05:47] [PACMAN] installed mpfr (3.1.2.p5-1)
    [2014-01-25 05:47] [PACMAN] installed gawk (4.1.0-2)
    [2014-01-25 05:47] [PACMAN] installed libunistring (0.9.3-6)
    [2014-01-25 05:47] [PACMAN] installed gettext (0.18.3.2-1)
    [2014-01-25 05:47] [PACMAN] installed grep (2.16-1)
    [2014-01-25 05:47] [PACMAN] installed less (458-1)
    [2014-01-25 05:47] [PACMAN] installed gzip (1.6-1)
    [2014-01-25 05:47] [PACMAN] installed inetutils (1.9.2-1)
    [2014-01-25 05:47] [PACMAN] installed iptables (1.4.21-1)
    [2014-01-25 05:47] [PACMAN] installed iproute2 (3.12.0-1)
    [2014-01-25 05:47] [PACMAN] installed sysfsutils (2.1.0-8)
    [2014-01-25 05:47] [PACMAN] installed iputils (20121221-3)
    [2014-01-25 05:47] [PACMAN] installed jfsutils (1.1.15-4)
    [2014-01-25 05:47] [PACMAN] installed licenses (20130203-1)
    [2014-01-25 05:47] [PACMAN] installed linux-firmware (20140123.418320b-1)
    [2014-01-25 05:47] [PACMAN] installed mkinitcpio-busybox (1.21.1-2)
    [2014-01-25 05:47] [PACMAN] installed lzo2 (2.06-3)
    [2014-01-25 05:47] [PACMAN] installed libarchive (3.1.2-4)
    [2014-01-25 05:47] [PACMAN] installed mkinitcpio (16-2)
    [2014-01-25 05:47] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-01-25 05:47] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2014-01-25 05:47] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-25 05:47] [PACMAN] installed linux (3.12.8-1)
    [2014-01-25 05:47] [PACMAN] installed logrotate (3.8.7-1)
    [2014-01-25 05:47] [PACMAN] installed lvm2 (2.02.105-1)
    [2014-01-25 05:47] [PACMAN] installed groff (1.22.2-5)
    [2014-01-25 05:47] [PACMAN] installed libpipeline (1.2.6-1)
    [2014-01-25 05:47] [ALPM-SCRIPTLET] it's recommended to create an initial
    [2014-01-25 05:47] [ALPM-SCRIPTLET] database running as root:
    [2014-01-25 05:47] [ALPM-SCRIPTLET] "/usr/bin/mandb --quiet"
    [2014-01-25 05:47] [PACMAN] installed man-db (2.6.5-1)
    [2014-01-25 05:47] [PACMAN] installed man-pages (3.56-1)
    [2014-01-25 05:47] [PACMAN] installed mdadm (3.3-2)
    [2014-01-25 05:47] [PACMAN] installed nano (2.2.6-2)
    [2014-01-25 05:47] [PACMAN] installed openresolv (3.5.6-1)
    [2014-01-25 05:47] [PACMAN] installed netctl (1.4-2)
    [2014-01-25 05:47] [PACMAN] installed sed (4.2.2-3)
    [2014-01-25 05:47] [PACMAN] installed ca-certificates (20130906-1)
    [2014-01-25 05:47] [PACMAN] installed libsasl (2.1.26-6)
    [2014-01-25 05:47] [PACMAN] installed libldap (2.4.38-1)
    [2014-01-25 05:47] [PACMAN] installed keyutils (1.5.8-1)
    [2014-01-25 05:47] [PACMAN] installed krb5 (1.11.4-1)
    [2014-01-25 05:47] [PACMAN] installed libssh2 (1.4.3-2)
    [2014-01-25 05:47] [PACMAN] installed curl (7.34.0-3)
    [2014-01-25 05:47] [PACMAN] installed pth (2.0.7-5)
    [2014-01-25 05:47] [PACMAN] installed libksba (1.3.0-1)
    [2014-01-25 05:47] [PACMAN] installed libassuan (2.1.1-1)
    [2014-01-25 05:47] [PACMAN] installed pinentry (0.8.3-1)
    [2014-01-25 05:47] [PACMAN] installed dirmngr (1.1.1-2)
    [2014-01-25 05:47] [PACMAN] installed gnupg (2.0.22-2)
    [2014-01-25 05:47] [PACMAN] installed gpgme (1.4.3-1)
    [2014-01-25 05:47] [PACMAN] installed pacman-mirrorlist (20140107-1)
    [2014-01-25 05:47] [PACMAN] installed archlinux-keyring (20140124-1)
    [2014-01-25 05:47] [PACMAN] installed pacman (4.1.2-5)
    [2014-01-25 05:47] [PACMAN] installed pciutils (3.2.0-4)
    [2014-01-25 05:47] [PACMAN] installed pcmciautils (018-7)
    [2014-01-25 05:47] [PACMAN] installed procps-ng (3.3.9-2)
    [2014-01-25 05:47] [PACMAN] installed psmisc (22.20-1)
    [2014-01-25 05:47] [PACMAN] installed reiserfsprogs (3.6.24-1)
    [2014-01-25 05:47] [PACMAN] installed s-nail (14.5.2-1)
    [2014-01-25 05:47] [PACMAN] installed systemd-sysvcompat (208-10)
    [2014-01-25 05:47] [PACMAN] installed tar (1.27.1-1)
    [2014-01-25 05:47] [PACMAN] installed texinfo (5.2-2)
    [2014-01-25 05:47] [PACMAN] installed libusbx (1.0.17-1)
    [2014-01-25 05:47] [PACMAN] installed usbutils (007-1)
    [2014-01-25 05:47] [PACMAN] installed vi (1:050325-3)
    [2014-01-25 05:47] [PACMAN] installed which (2.20-6)
    [2014-01-25 05:47] [PACMAN] installed xfsprogs (3.1.11-2)
    [2014-01-25 05:47] [PACMAN] installed m4 (1.4.17-1)
    [2014-01-25 05:47] [PACMAN] installed autoconf (2.69-1)
    [2014-01-25 05:47] [PACMAN] installed automake (1.14.1-1)
    [2014-01-25 05:47] [PACMAN] installed binutils (2.24-1)
    [2014-01-25 05:47] [PACMAN] installed bison (3.0.2-1)
    [2014-01-25 05:47] [PACMAN] installed fakeroot (1.20-1)
    [2014-01-25 05:47] [PACMAN] installed flex (2.5.37-1)
    [2014-01-25 05:47] [PACMAN] installed libmpc (1.0.1-2)
    [2014-01-25 05:47] [PACMAN] installed isl (0.12.2-1)
    [2014-01-25 05:47] [PACMAN] installed cloog (0.18.1-2)
    [2014-01-25 05:47] [PACMAN] installed gcc (4.8.2-7)
    [2014-01-25 05:47] [PACMAN] installed libltdl (2.4.2-12)
    [2014-01-25 05:47] [PACMAN] installed libtool (2.4.2-12)
    [2014-01-25 05:47] [PACMAN] installed gc (7.2.d-2)
    [2014-01-25 05:47] [PACMAN] installed guile (2.0.9-1)
    [2014-01-25 05:47] [PACMAN] installed make (4.0-2)
    [2014-01-25 05:47] [PACMAN] installed patch (2.7.1-2)
    [2014-01-25 05:47] [PACMAN] installed pkg-config (0.28-1)
    [2014-01-25 05:47] [PACMAN] installed sudo (1.8.9.p4-1)
    [2014-01-25 05:54] [PACMAN] Running 'pacman -S sudo'
    [2014-01-25 05:54] [PACMAN] reinstalled sudo (1.8.9.p4-1)
    [2014-01-25 05:57] [PACMAN] Running 'pacman -S gummiboot'
    [2014-01-25 05:57] [ALPM-SCRIPTLET] Copied /usr/lib/gummiboot/gummibootx64.efi to /boot/EFI/gummiboot/gummibootx64.efi.
    [2014-01-25 05:57] [ALPM-SCRIPTLET] Created EFI boot entry "Linux Boot Manager".
    [2014-01-25 05:57] [ALPM-SCRIPTLET] :: Run '/usr/bin/gummiboot install' to make gummiboot your default bootloader
    [2014-01-25 05:57] [PACMAN] installed gummiboot (41-1)
    [2014-01-25 06:14] [PACMAN] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils xf86-input-synaptics nvidia acpid'
    [2014-01-25 06:15] [PACMAN] installed xproto (7.0.25-1)
    [2014-01-25 06:15] [PACMAN] installed libxdmcp (1.1.1-1)
    [2014-01-25 06:15] [PACMAN] installed libpng (1.6.7-1)
    [2014-01-25 06:15] [PACMAN] installed freetype2 (2.5.2-1)
    [2014-01-25 06:15] [PACMAN] installed libfontenc (1.1.2-1)
    [2014-01-25 06:15] [PACMAN] installed fontsproto (2.1.2-1)
    [2014-01-25 06:15] [PACMAN] installed libxfont (1.4.7-1)
    [2014-01-25 06:15] [PACMAN] installed libpciaccess (0.13.2-2)
    [2014-01-25 06:15] [PACMAN] installed libdrm (2.4.52-1)
    [2014-01-25 06:15] [PACMAN] installed pixman (0.32.4-1)
    [2014-01-25 06:15] [PACMAN] installed libxau (1.0.8-2)
    [2014-01-25 06:15] [PACMAN] installed xkeyboard-config (2.10.1-1)
    [2014-01-25 06:15] [PACMAN] installed xcb-proto (1.10-1)
    [2014-01-25 06:15] [PACMAN] installed libxcb (1.10-1)
    [2014-01-25 06:15] [PACMAN] installed kbproto (1.0.6-1)
    [2014-01-25 06:15] [PACMAN] installed libx11 (1.6.2-1)
    [2014-01-25 06:15] [PACMAN] installed libxkbfile (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xkbcomp (1.2.4-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-setxkbmap (1.3.0-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-fonts-encodings (1.0.4-3)
    [2014-01-25 06:15] [PACMAN] installed xorg-fonts-alias (1.0.3-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-bdftopcf (1.0.4-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-mkfontscale (1.1.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-mkfontdir (1.0.7-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-font-util (1.3.0-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-font-utils (7.6-3)
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Fontconfig configuration is done via /etc/fonts/conf.avail and conf.d.
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Read /etc/fonts/conf.d/README for more information.
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Configuration via /etc/fonts/local.conf is still possible,
    [2014-01-25 06:15] [ALPM-SCRIPTLET] but is no longer recommended for options available in conf.avail.
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Main systemwide configuration should be done by symlinks
    [2014-01-25 06:15] [ALPM-SCRIPTLET] (especially for autohinting, sub-pixel and lcdfilter):
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] cd /etc/fonts/conf.d
    [2014-01-25 06:15] [ALPM-SCRIPTLET] ln -s ../conf.avail/XX-foo.conf
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Check also https://wiki.archlinux.org/index.php/Font_Configuration
    [2014-01-25 06:15] [ALPM-SCRIPTLET] and https://wiki.archlinux.org/index.php/Fonts.
    [2014-01-25 06:15] [ALPM-SCRIPTLET]
    [2014-01-25 06:15] [ALPM-SCRIPTLET] updating font cache... done.
    [2014-01-25 06:15] [PACMAN] installed fontconfig (2.11.0-1)
    [2014-01-25 06:15] [ALPM-SCRIPTLET] Updating font cache... done.
    [2014-01-25 06:15] [PACMAN] installed xorg-fonts-misc (1.0.1-2)
    [2014-01-25 06:15] [PACMAN] installed xorg-server-common (1.15.0-5)
    [2014-01-25 06:15] [PACMAN] installed mtdev (1.1.4-1)
    [2014-01-25 06:15] [PACMAN] installed xf86-input-evdev (2.8.2-2)
    [2014-01-25 06:15] [PACMAN] installed libxshmfence (1.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-server (1.15.0-5)
    [2014-01-25 06:15] [PACMAN] installed xextproto (7.3.0-1)
    [2014-01-25 06:15] [PACMAN] installed libxext (1.3.2-1)
    [2014-01-25 06:15] [PACMAN] installed libice (1.0.8-2)
    [2014-01-25 06:15] [PACMAN] installed libsm (1.2.2-2)
    [2014-01-25 06:15] [PACMAN] installed libxt (1.1.4-1)
    [2014-01-25 06:15] [PACMAN] installed libxmu (1.1.2-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xauth (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xinit (1.3.3-3)
    [2014-01-25 06:15] [PACMAN] installed xorg-iceauth (1.0.6-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-sessreg (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xcmsdb (1.0.4-1)
    [2014-01-25 06:15] [PACMAN] installed xcb-util (0.3.9-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xbacklight (1.2.0-1)
    [2014-01-25 06:15] [PACMAN] installed xf86vidmodeproto (2.3.1-2)
    [2014-01-25 06:15] [PACMAN] installed libxxf86vm (1.1.3-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xgamma (1.0.5-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xhost (1.0.6-1)
    [2014-01-25 06:15] [PACMAN] installed inputproto (2.3-1)
    [2014-01-25 06:15] [PACMAN] installed libxi (1.7.2-1)
    [2014-01-25 06:15] [PACMAN] installed renderproto (0.11.1-2)
    [2014-01-25 06:15] [PACMAN] installed libxrender (0.9.8-1)
    [2014-01-25 06:15] [PACMAN] installed randrproto (1.4.0-1)
    [2014-01-25 06:15] [PACMAN] installed libxrandr (1.4.2-2)
    [2014-01-25 06:15] [PACMAN] installed xorg-xrandr (1.4.1-1)
    [2014-01-25 06:15] [PACMAN] installed xineramaproto (1.2.1-2)
    [2014-01-25 06:15] [PACMAN] installed libxinerama (1.1.3-2)
    [2014-01-25 06:15] [PACMAN] installed xorg-xinput (1.6.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xmodmap (1.0.8-1)
    [2014-01-25 06:15] [PACMAN] installed mcpp (2.7.2-4)
    [2014-01-25 06:15] [PACMAN] installed xorg-xrdb (1.1.0-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xrefresh (1.0.5-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xset (1.2.3-1)
    [2014-01-25 06:15] [PACMAN] installed fixesproto (5.0-2)
    [2014-01-25 06:15] [PACMAN] installed libxfixes (5.0.1-1)
    [2014-01-25 06:15] [PACMAN] installed libxcursor (1.1.14-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-xsetroot (1.1.1-1)
    [2014-01-25 06:15] [PACMAN] installed xorg-server-utils (7.6-3)
    [2014-01-25 06:15] [PACMAN] installed recordproto (1.14.2-1)
    [2014-01-25 06:15] [PACMAN] installed libxtst (1.2.2-1)
    [2014-01-25 06:15] [PACMAN] installed xf86-input-synaptics (1.7.3-1)
    [2014-01-25 06:15] [PACMAN] installed nvidia-utils (331.38-1)
    [2014-01-25 06:15] [PACMAN] installed nvidia-libgl (331.38-1)
    [2014-01-25 06:15] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-01-25 06:15] [PACMAN] installed nvidia (331.38-2)
    [2014-01-25 06:15] [PACMAN] installed acpid (2.0.21-1)
    [2014-01-25 06:19] [PACMAN] Running 'pacman -S dialog wpa_supplicant'
    [2014-01-25 06:19] [PACMAN] installed dialog (1:1.2_20140112-1)
    [2014-01-25 06:19] [PACMAN] installed libnl (3.2.23-1)
    [2014-01-25 06:19] [PACMAN] installed wpa_supplicant (2.0-4)
    [2014-01-25 06:21] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 06:26] [PACMAN] installed dconf (0.18.0-1)
    [2014-01-25 06:26] [PACMAN] installed atk (2.10.0-1)
    [2014-01-25 06:26] [PACMAN] installed libvdpau (0.7-1)
    [2014-01-25 06:26] [PACMAN] installed wayland (1.4.0-1)
    [2014-01-25 06:26] [PACMAN] installed damageproto (1.2.1-2)
    [2014-01-25 06:26] [PACMAN] installed libxdamage (1.1.4-1)
    [2014-01-25 06:26] [PACMAN] installed elfutils (0.157-1)
    [2014-01-25 06:26] [PACMAN] installed llvm-libs (3.4-1)
    [2014-01-25 06:26] [PACMAN] installed mesa (10.0.2-1)
    [2014-01-25 06:26] [PACMAN] installed cairo (1.12.16-1)
    [2014-01-25 06:26] [PACMAN] installed libjpeg-turbo (1.3.0-4)
    [2014-01-25 06:26] [PACMAN] installed libtiff (4.0.3-4)
    [2014-01-25 06:26] [PACMAN] installed jasper (1.900.1-10)
    [2014-01-25 06:26] [PACMAN] installed gdk-pixbuf2 (2.30.3-1)
    [2014-01-25 06:26] [PACMAN] installed hicolor-icon-theme (0.12-2)
    [2014-01-25 06:26] [PACMAN] installed gtk-update-icon-cache (2.24.22-1)
    [2014-01-25 06:26] [PACMAN] installed libdaemon (0.14-2)
    [2014-01-25 06:26] [PACMAN] installed avahi (0.6.31-11)
    [2014-01-25 06:26] [PACMAN] installed libcups (1.7.1-3)
    [2014-01-25 06:26] [PACMAN] installed compositeproto (0.4.2-2)
    [2014-01-25 06:26] [PACMAN] installed libxcomposite (0.4.4-1)
    [2014-01-25 06:26] [PACMAN] installed libdatrie (0.2.6-1)
    [2014-01-25 06:26] [PACMAN] installed libthai (0.1.19-1)
    [2014-01-25 06:26] [PACMAN] installed libxft (2.3.1-2)
    [2014-01-25 06:26] [PACMAN] installed graphite (1:1.2.4-1)
    [2014-01-25 06:26] [PACMAN] installed harfbuzz (0.9.24-1)
    [2014-01-25 06:26] [PACMAN] installed pango (1.36.1-1)
    [2014-01-25 06:26] [PACMAN] installed libxml2 (2.9.1-5)
    [2014-01-25 06:26] [PACMAN] installed shared-mime-info (1.2-1)
    [2014-01-25 06:26] [PACMAN] installed lcms2 (2.5-2)
    [2014-01-25 06:26] [PACMAN] installed libgusb (0.1.6-1)
    [2014-01-25 06:26] [PACMAN] installed nspr (4.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed js (17.0.0-1)
    [2014-01-25 06:26] [PACMAN] installed polkit (0.112-1)
    [2014-01-25 06:26] [PACMAN] installed shared-color-profiles (0.1.5-1)
    [2014-01-25 06:26] [PACMAN] installed sqlite (3.8.2-1)
    [2014-01-25 06:26] [PACMAN] installed colord (1.0.4-1)
    [2014-01-25 06:26] [PACMAN] installed at-spi2-core (2.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed at-spi2-atk (2.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed libxkbcommon (0.3.2-1)
    [2014-01-25 06:26] [PACMAN] installed gtk3 (3.10.6-1)
    [2014-01-25 06:26] [PACMAN] installed gsettings-desktop-schemas (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed desktop-file-utils (0.22-1)
    [2014-01-25 06:26] [PACMAN] installed baobab (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed cogl (1.16.2-1)
    [2014-01-25 06:26] [PACMAN] installed json-glib (0.16.2-1)
    [2014-01-25 06:26] [PACMAN] installed libevdev (0.6-1)
    [2014-01-25 06:26] [PACMAN] installed clutter (1.16.4-1)
    [2014-01-25 06:26] [PACMAN] installed gstreamer (1.2.2-1)
    [2014-01-25 06:26] [PACMAN] installed orc (0.4.18-1)
    [2014-01-25 06:26] [PACMAN] installed videoproto (2.3.2-1)
    [2014-01-25 06:26] [PACMAN] installed libxv (1.0.10-1)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-base-libs (1.2.2-1)
    [2014-01-25 06:26] [PACMAN] installed sdl (1.2.15-5)
    [2014-01-25 06:26] [PACMAN] installed libdv (1.0.0-5)
    [2014-01-25 06:26] [PACMAN] installed mjpegtools (2.0.0-4)
    [2014-01-25 06:26] [PACMAN] installed alsa-lib (1.0.27.2-1)
    [2014-01-25 06:26] [PACMAN] installed libtasn1 (3.4-1)
    [2014-01-25 06:26] [PACMAN] installed nettle (2.7.1-1)
    [2014-01-25 06:26] [PACMAN] installed p11-kit (0.20.1-1)
    [2014-01-25 06:26] [PACMAN] installed gnutls (3.2.9-1)
    [2014-01-25 06:26] [PACMAN] installed gsm (1.0.13-7)
    [2014-01-25 06:26] [PACMAN] installed lame (3.99.5-2)
    [2014-01-25 06:26] [PACMAN] installed fribidi (0.19.6-1)
    [2014-01-25 06:26] [PACMAN] installed recode (3.6-8)
    [2014-01-25 06:26] [PACMAN] installed enca (1.15-1)
    [2014-01-25 06:26] [PACMAN] installed libass (0.10.2-2)
    [2014-01-25 06:26] [PACMAN] installed libbluray (0.5.0-1)
    [2014-01-25 06:26] [PACMAN] installed libmodplug (0.8.8.4-2)
    [2014-01-25 06:26] [PACMAN] installed libasyncns (0.8-5)
    [2014-01-25 06:26] [PACMAN] installed libogg (1.3.1-2)
    [2014-01-25 06:26] [PACMAN] installed flac (1.3.0-1)
    [2014-01-25 06:26] [PACMAN] installed libvorbis (1.3.4-1)
    [2014-01-25 06:26] [PACMAN] installed libsndfile (1.0.25-3)
    [2014-01-25 06:26] [PACMAN] installed json-c (0.11-1)
    [2014-01-25 06:26] [PACMAN] installed libpulse (4.0-6)
    [2014-01-25 06:26] [PACMAN] installed libtheora (1.1.1-3)
    [2014-01-25 06:26] [PACMAN] installed libva (1.2.1-1)
    [2014-01-25 06:26] [PACMAN] installed libvpx (1.3.0-1)
    [2014-01-25 06:26] [PACMAN] installed opencore-amr (0.1.3-1)
    [2014-01-25 06:26] [PACMAN] installed openjpeg (1.5.1-1)
    [2014-01-25 06:26] [PACMAN] installed opus (1.1-1)
    [2014-01-25 06:26] [PACMAN] installed rtmpdump (20131205-1)
    [2014-01-25 06:26] [PACMAN] installed schroedinger (1.0.11-2)
    [2014-01-25 06:26] [PACMAN] installed speex (1.2rc1-4)
    [2014-01-25 06:26] [PACMAN] installed v4l-utils (1.0.0-2)
    [2014-01-25 06:26] [PACMAN] installed x264 (20131030-2)
    [2014-01-25 06:26] [PACMAN] installed xvidcore (1.3.2-3)
    [2014-01-25 06:26] [PACMAN] installed ffmpeg (1:2.1.3-1)
    [2014-01-25 06:26] [PACMAN] installed chromaprint (1.1-1)
    [2014-01-25 06:26] [PACMAN] installed libmms (0.6.2-1)
    [2014-01-25 06:26] [PACMAN] installed faad2 (2.7-4)
    [2014-01-25 06:26] [PACMAN] installed mpg123 (1.17.0-1)
    [2014-01-25 06:26] [PACMAN] installed libmp4v2 (2.0.0-3)
    [2014-01-25 06:26] [PACMAN] installed faac (1.28-5)
    [2014-01-25 06:26] [PACMAN] installed celt (0.11.3-2)
    [2014-01-25 06:26] [PACMAN] installed libdca (0.0.5-4)
    [2014-01-25 06:26] [PACMAN] installed soundtouch (1.7.1-1)
    [2014-01-25 06:26] [PACMAN] installed spandsp (0.0.6pre21-2)
    [2014-01-25 06:26] [PACMAN] installed libdvdread (4.2.0-1)
    [2014-01-25 06:26] [PACMAN] installed libdvdnav (4.2.0-2)
    [2014-01-25 06:26] [PACMAN] installed libgme (0.6.0-2)
    [2014-01-25 06:26] [PACMAN] installed neon (0.30.0-1)
    [2014-01-25 06:26] [PACMAN] installed fftw (3.3.3-2)
    [2014-01-25 06:26] [PACMAN] installed libofa (0.9.3-5)
    [2014-01-25 06:26] [PACMAN] installed libsamplerate (0.1.8-3)
    [2014-01-25 06:26] [PACMAN] installed jack (0.121.3-7)
    [2014-01-25 06:26] [ALPM-SCRIPTLET]
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > To use FluidSynth as a daemon copy the service file from:
    [2014-01-25 06:26] [ALPM-SCRIPTLET] /usr/lib/systemd/system/fluidsynth.service
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > to:
    [2014-01-25 06:26] [ALPM-SCRIPTLET] /etc/systemd/system/multi-user.target.wants/
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > and then edit accordingly.
    [2014-01-25 06:26] [ALPM-SCRIPTLET]
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > PulseAudio output when running as a daemon is known to be
    [2014-01-25 06:26] [ALPM-SCRIPTLET] > problematic. See the following bulletin board post:
    [2014-01-25 06:26] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?id=135092
    [2014-01-25 06:26] [ALPM-SCRIPTLET]
    [2014-01-25 06:26] [PACMAN] installed fluidsynth (1.1.6-2)
    [2014-01-25 06:26] [PACMAN] installed giflib (5.0.5-1)
    [2014-01-25 06:26] [PACMAN] installed libwebp (0.3.1-3)
    [2014-01-25 06:26] [PACMAN] installed libsrtp (15.1c9bd90-2)
    [2014-01-25 06:26] [PACMAN] installed wildmidi (0.2.3.5-2)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-bad (1.2.2-2)
    [2014-01-25 06:26] [PACMAN] installed clutter-gst (2.0.10-1)
    [2014-01-25 06:26] [PACMAN] installed clutter-gtk (1.4.4-4)
    [2014-01-25 06:26] [PACMAN] installed dbus-glib (0.100.2-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-glib (0.22.0-1)
    [2014-01-25 06:26] [PACMAN] installed libgee (0.12.0-1)
    [2014-01-25 06:26] [PACMAN] installed libxslt (1.1.28-3)
    [2014-01-25 06:26] [PACMAN] installed libproxy (0.4.11-2)
    [2014-01-25 06:26] [PACMAN] installed glib-networking (2.38.2-1)
    [2014-01-25 06:26] [PACMAN] installed libsoup (2.44.2-1)
    [2014-01-25 06:26] [ALPM-SCRIPTLET] ==> aspell comes with no default dictionary
    [2014-01-25 06:26] [PACMAN] installed aspell (0.60.6.1-1)
    [2014-01-25 06:26] [PACMAN] installed hunspell (1.3.2-3)
    [2014-01-25 06:26] [PACMAN] installed hspell (1.2-1)
    [2014-01-25 06:26] [PACMAN] installed enchant (1.6.0-4)
    [2014-01-25 06:26] [PACMAN] installed geoclue (0.12.99-1)
    [2014-01-25 06:26] [PACMAN] installed libsecret (0.16-2)
    [2014-01-25 06:26] [PACMAN] installed icu (52.1-1)
    [2014-01-25 06:26] [PACMAN] installed harfbuzz-icu (0.9.24-1)
    [2014-01-25 06:26] [PACMAN] installed webkitgtk (2.2.4-1)
    [2014-01-25 06:26] [PACMAN] installed libnotify (0.7.6-1)
    [2014-01-25 06:26] [PACMAN] installed rest (0.7.90-2)
    [2014-01-25 06:26] [PACMAN] installed gcr (3.10.1-2)
    [2014-01-25 06:26] [PACMAN] installed gnome-online-accounts (3.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed nss (3.15.3.1-1)
    [2014-01-25 06:26] [PACMAN] installed perl-xml-parser (2.41-4)
    [2014-01-25 06:26] [PACMAN] installed perl-xml-simple (2.20-1)
    [2014-01-25 06:26] [PACMAN] installed icon-naming-utils (0.8.90-2)
    [2014-01-25 06:26] [PACMAN] installed libcroco (0.6.8-1)
    [2014-01-25 06:26] [PACMAN] installed librsvg (1:2.40.1-3)
    [2014-01-25 06:26] [PACMAN] installed gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed gnome-icon-theme (3.10.0-1)
    [2014-01-25 06:26] [PACMAN] installed libgweather (3.10.1-1)
    [2014-01-25 06:26] [PACMAN] installed libical (1.0-3)
    [2014-01-25 06:26] [PACMAN] installed liboauth (1.0.1-1)
    [2014-01-25 06:26] [PACMAN] installed libgdata (0.14.1-1)
    [2014-01-25 06:26] [PACMAN] installed evolution-data-server (3.10.3-1)
    [2014-01-25 06:26] [PACMAN] installed zeitgeist (0.9.14-1)
    [2014-01-25 06:26] [PACMAN] installed libtracker-sparql (0.16.4-1)
    [2014-01-25 06:26] [PACMAN] installed folks (0.9.6-1)
    [2014-01-25 06:26] [PACMAN] installed iso-codes (3.44-1)
    [2014-01-25 06:26] [PACMAN] installed tdb (1.2.12-1)
    [2014-01-25 06:26] [PACMAN] installed sound-theme-freedesktop (0.8-1)
    [2014-01-25 06:26] [PACMAN] installed libcanberra (0.30-4)
    [2014-01-25 06:26] [PACMAN] installed libnice (0.1.4-1)
    [2014-01-25 06:26] [PACMAN] installed farstream (0.2.3-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-farstream (0.6.0-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-logger (0.8.0-1)
    [2014-01-25 06:26] [PACMAN] installed libgnome-keyring (3.10.1-2)
    [2014-01-25 06:26] [PACMAN] installed python2 (2.7.6-1)
    [2014-01-25 06:26] [PACMAN] installed libplist (1.10-1)
    [2014-01-25 06:26] [PACMAN] installed usbmuxd (1.0.8-2)
    [2014-01-25 06:26] [PACMAN] installed libimobiledevice (1.1.5-2)
    [2014-01-25 06:26] [PACMAN] installed upower (0.9.23-2)
    [2014-01-25 06:26] [PACMAN] installed libpcap (1.5.1-1)
    [2014-01-25 06:26] [PACMAN] installed ppp (2.4.5-8)
    [2014-01-25 06:26] [PACMAN] installed libqmi (1.8.0-1)
    [2014-01-25 06:26] [PACMAN] installed libmbim (1.4.0-1)
    [2014-01-25 06:26] [PACMAN] installed modemmanager (1.0.0-2)
    [2014-01-25 06:26] [PACMAN] installed networkmanager (0.9.8.8-1)
    [2014-01-25 06:26] [PACMAN] installed telepathy-mission-control (5.16.0-1)
    [2014-01-25 06:26] [PACMAN] installed geoclue2 (1.99.4-1)
    [2014-01-25 06:26] [PACMAN] installed geocode-glib (3.10.0-1)
    [2014-01-25 06:26] [PACMAN] installed cdparanoia (10.2-5)
    [2014-01-25 06:26] [PACMAN] installed libvisual (0.4.0-4)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-base (1.2.2-1)
    [2014-01-25 06:26] [PACMAN] installed wavpack (4.70.0-2)
    [2014-01-25 06:26] [PACMAN] installed gpm (1.20.7-4)
    [2014-01-25 06:26] [PACMAN] installed aalib (1.4rc5-10)
    [2014-01-25 06:26] [PACMAN] installed taglib (1.9.1-1)
    [2014-01-25 06:26] [PACMAN] installed libshout (1:2.3.1-2)
    [2014-01-25 06:26] [PACMAN] installed libid3tag (0.15.1b-8)
    [2014-01-25 06:26] [PACMAN] installed imlib2 (1.4.5-6)
    [2014-01-25 06:26] [PACMAN] installed libcaca (0.99.beta18-2)
    [2014-01-25 06:26] [PACMAN] installed libraw1394 (2.1.0-2)
    [2014-01-25 06:26] [PACMAN] installed libavc1394 (0.5.4-2)
    [2014-01-25 06:26] [PACMAN] installed libiec61883 (1.2.0-4)
    [2014-01-25 06:26] [PACMAN] installed gst-plugins-good (1.2.2-2)
    [2014-01-25 06:26] [PACMAN] installed gnome-video-effects (0.4.0-2)
    [2014-01-25 06:26] [PACMAN] installed gnome-desktop (1:3.10.2-1)
    [2014-01-25 06:26] [PACMAN] installed cheese (3.10.2-2)
    [2014-01-25 06:26] [PACMAN] installed libchamplain (0.12.5-2)
    [2014-01-25 06:26] [ALPM-SCRIPTLET] To use Empathy you need to install at least one Telepathy connection manager.
    [2014-01-25 06:26] [PACMAN] installed empathy (3.10.3-1)
    [2014-01-25 06:26] [PACMAN] installed libexif (0.6.21-2)
    [2014-01-25 06:26] [PACMAN] installed exempi (2.2.1-2)
    [2014-01-25 06:26] [PACMAN] installed python2-markupsafe (0.18-2)
    [2014-01-25 06:26] [PACMAN] installed python2-beaker (1.6.4-1)
    [2014-01-25 06:26] [PACMAN] installed python2-mako (0.9.1-1)
    [2014-01-25 06:26] [PACMAN] installed gobject-introspection (1.38.0-1)
    [2014-01-25 06:26] [PACMAN] installed libpeas (1.9.0-1)
    [2014-01-25 06:26] [PACMAN] installed eog (3.10.2-2)
    [2014-01-25 06:26] [PACMAN] installed startup-notification (0.12-4)
    [2014-01-25 06:26] [PACMAN] installed libxres (1.0.7-1)
    [2014-01-25 06:26] [PACMAN] installed libwnck3 (3.4.7-1)
    [2014-01-25 06:27] [PACMAN] installed cantarell-fonts (0.0.15-1)
    [2014-01-25 06:27] [PACMAN] installed ttf-dejavu (2.34-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-themes-standard (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed epiphany (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed libgxps (0.2.2-3)
    [2014-01-25 06:27] [PACMAN] installed libpaper (1.1.24-7)
    [2014-01-25 06:27] [PACMAN] installed ghostscript (9.10-3)
    [2014-01-25 06:27] [PACMAN] installed libspectre (0.2.7-1)
    [2014-01-25 06:27] [ALPM-SCRIPTLET] Updating font cache... done.
    [2014-01-25 06:27] [PACMAN] installed gsfonts (1.0.7pre44-4)
    [2014-01-25 06:27] [PACMAN] installed poppler (0.24.5-1)
    [2014-01-25 06:27] [PACMAN] installed poppler-glib (0.24.5-1)
    [2014-01-25 06:27] [PACMAN] installed djvulibre (3.5.25.3-1)
    [2014-01-25 06:27] [PACMAN] installed libxpm (3.5.11-1)
    [2014-01-25 06:27] [PACMAN] installed libxaw (1.0.12-1)
    [2014-01-25 06:27] [PACMAN] installed t1lib (5.1.2-4)
    [2014-01-25 06:27] [PACMAN] installed evince (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed accountsservice (0.6.35-2)
    [2014-01-25 06:27] [PACMAN] installed python2-cairo (1.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed pygobject-devel (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed python2-gobject (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed python2-atspi (2.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed libxklavier (5.3-1)
    [2014-01-25 06:27] [PACMAN] installed caribou (0.4.13-1)
    [2014-01-25 06:27] [PACMAN] installed gjs (1.38.1-1)
    [2014-01-25 06:27] [PACMAN] installed bluez (5.14-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-bluetooth (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-menus (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-session (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libcanberra-pulse (0.30-4)
    [2014-01-25 06:27] [PACMAN] installed libwacom (0.8-1)
    [2014-01-25 06:27] [PACMAN] installed rtkit (0.11-4)
    [2014-01-25 06:27] [PACMAN] installed webrtc-audio-processing (0.1-1)
    [2014-01-25 06:27] [PACMAN] installed sbc (1.1-1)
    [2014-01-25 06:27] [ALPM-SCRIPTLET] >>> See the wiki at http://wiki.archlinux.org/index.php/PulseAudio for details
    [2014-01-25 06:27] [ALPM-SCRIPTLET] on configuring your system for PulseAudio.
    [2014-01-25 06:27] [ALPM-SCRIPTLET]
    [2014-01-25 06:27] [ALPM-SCRIPTLET] >>> Make sure to install pulseaudio-alsa to configure ALSA for PulseAudio.
    [2014-01-25 06:27] [PACMAN] installed pulseaudio (4.0-6)
    [2014-01-25 06:27] [PACMAN] installed alsa-plugins (1.0.27-2)
    [2014-01-25 06:27] [PACMAN] installed pulseaudio-alsa (2-2)
    [2014-01-25 06:27] [PACMAN] installed libibus (1.5.5-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-settings-daemon (3.10.2-3)
    [2014-01-25 06:27] [PACMAN] installed libgdm (3.10.0.1-2)
    [2014-01-25 06:27] [PACMAN] installed zenity (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed mutter (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed mutter-wayland (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed mobile-broadband-provider-info (20120614-1)
    [2014-01-25 06:27] [PACMAN] installed network-manager-applet (0.9.8.8-1)
    [2014-01-25 06:27] [PACMAN] installed unzip (6.0-6)
    [2014-01-25 06:27] [PACMAN] installed gnome-shell (3.10.3-1)
    [2014-01-25 06:27] [PACMAN] installed gdm (3.10.0.1-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-backgrounds (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-calculator (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-contacts (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed cups-pk-helper (0.2.5-1)
    [2014-01-25 06:27] [PACMAN] installed libgtop (2.28.5-1)
    [2014-01-25 06:27] [PACMAN] installed libpwquality (1.2.3-1)
    [2014-01-25 06:27] [PACMAN] installed vte-common (0.34.9-1)
    [2014-01-25 06:27] [PACMAN] installed vte3 (0.34.9-1)
    [2014-01-25 06:27] [PACMAN] installed exiv2 (0.23-2)
    [2014-01-25 06:27] [PACMAN] installed mash (0.2.0-3)
    [2014-01-25 06:27] [PACMAN] installed shared-color-targets (0.1.2-1)
    [2014-01-25 06:27] [PACMAN] installed colord-gtk (0.1.25-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-color-manager (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libcap-ng (0.7.3-1)
    [2014-01-25 06:27] [PACMAN] installed talloc (2.0.8-2)
    [2014-01-25 06:27] [PACMAN] installed libbsd (0.6.0-2)
    [2014-01-25 06:27] [PACMAN] installed libwbclient (4.1.4-1)
    [2014-01-25 06:27] [PACMAN] installed cifs-utils (6.2-1)
    [2014-01-25 06:27] [PACMAN] installed tevent (0.9.19-1)
    [2014-01-25 06:27] [PACMAN] installed ldb (1.1.16-1)
    [2014-01-25 06:27] [PACMAN] installed smbclient (4.1.4-1)
    [2014-01-25 06:27] [PACMAN] installed libgnomekbd (3.6.0-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-control-center (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-dictionary (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed libatasmart (0.19-2)
    [2014-01-25 06:27] [PACMAN] installed udisks2 (2.1.1-3)
    [2014-01-25 06:27] [PACMAN] installed gnome-disk-utility (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-font-viewer (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-keyring (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-screenshot (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-shell-extensions (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-system-log (3.9.90-1)
    [2014-01-25 06:27] [PACMAN] installed libsigc++ (2.3.1-1)
    [2014-01-25 06:27] [PACMAN] installed glibmm (2.38.1-1)
    [2014-01-25 06:27] [PACMAN] installed cairomm (1.10.0-3)
    [2014-01-25 06:27] [PACMAN] installed pangomm (2.34.0-1)
    [2014-01-25 06:27] [PACMAN] installed atkmm (2.22.7-1)
    [2014-01-25 06:27] [PACMAN] installed gtkmm3 (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-system-monitor (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed gnome-terminal (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed yelp-xsl (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed yelp (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed gnome-user-docs (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed apr (1.5.0-1)
    [2014-01-25 06:27] [PACMAN] installed unixodbc (2.3.2-1)
    [2014-01-25 06:27] [PACMAN] installed apr-util (1.5.3-1)
    [2014-01-25 06:27] [PACMAN] installed apache (2.2.25-1)
    [2014-01-25 06:27] [PACMAN] installed mod_dnssd (0.6-4)
    [2014-01-25 06:27] [PACMAN] installed gnome-user-share (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed grilo (0.2.7-1)
    [2014-01-25 06:27] [PACMAN] installed grilo-plugins (0.2.9-3)
    [2014-01-25 06:27] [PACMAN] installed gucharmap (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed mousetweaks (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed fuse (2.9.3-2)
    [2014-01-25 06:27] [PACMAN] installed libcddb (1.3.2-4)
    [2014-01-25 06:27] [PACMAN] installed libcdio (0.92-1)
    [2014-01-25 06:27] [PACMAN] installed libcdio-paranoia (10.2+0.90+1-2)
    [2014-01-25 06:27] [PACMAN] installed gvfs (1.18.3-3)
    [2014-01-25 06:27] [PACMAN] installed nautilus-sendto (3.8.1-1)
    [2014-01-25 06:27] [PACMAN] installed libnautilus-extension (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed nautilus (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libmusicbrainz5 (5.0.1-1)
    [2014-01-25 06:27] [PACMAN] installed gtksourceview3 (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed sushi (3.10.0-1)
    [2014-01-25 06:27] [PACMAN] installed gmime (2.6.18-1)
    [2014-01-25 06:27] [PACMAN] installed totem-plparser (3.10.0-4)
    [2014-01-25 06:27] [PACMAN] installed python (3.3.3-1)
    [2014-01-25 06:27] [PACMAN] installed python-cairo (1.10.0-3)
    [2014-01-25 06:27] [PACMAN] installed python-gobject (3.10.2-1)
    [2014-01-25 06:27] [PACMAN] installed python-xdg (0.25-1)
    [2014-01-25 06:27] [PACMAN] installed totem (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed totem-plugin (3.10.1-1)
    [2014-01-25 06:27] [PACMAN] installed libgsf (1.14.28-1)
    [2014-01-25 06:27] [PACMAN] installed tracker (0.16.4-1)
    [2014-01-25 06:27] [PACMAN] installed vino (3.10.1-2)
    [2014-01-25 06:27] [PACMAN] installed xdg-user-dirs (0.15-1)
    [2014-01-25 06:27] [PACMAN] installed xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 06:28] [PACMAN] Running 'pacman -S gnome-extra'
    [2014-01-25 06:32] [PACMAN] installed accerciser (3.8.2-1)
    [2014-01-25 06:32] [PACMAN] installed gconf (3.2.6-3)
    [2014-01-25 06:32] [ALPM-SCRIPTLET]
    [2014-01-25 06:32] [ALPM-SCRIPTLET] (gconftool-2:5179): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
    [2014-01-25 06:32] [ALPM-SCRIPTLET] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    [2014-01-25 06:32] [PACMAN] installed aisleriot (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gdl (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed libanjuta (3.10.2-2)
    [2014-01-25 06:32] [PACMAN] installed autogen (5.18.2-1)
    [2014-01-25 06:32] [PACMAN] installed devhelp (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed glade (3.16.1-1)
    [2014-01-25 06:32] [PACMAN] installed libaio (0.3.109-7)
    [2014-01-25 06:32] [PACMAN] installed libmariadbclient (5.5.34-3)
    [2014-01-25 06:32] [PACMAN] installed postgresql-libs (9.3.2-4)
    [2014-01-25 06:32] [PACMAN] installed gd (2.1.0-2)
    [2014-01-25 06:32] [PACMAN] installed gts (0.7.6-3)
    [2014-01-25 06:32] [PACMAN] installed graphviz (2.34.0-3)
    [2014-01-25 06:32] [PACMAN] installed libgda (5.2.1-2)
    [2014-01-25 06:32] [PACMAN] installed serf (1.3.2-1)
    [2014-01-25 06:32] [PACMAN] installed subversion (1.8.5-1)
    [2014-01-25 06:32] [PACMAN] installed vala (0.22.1-1)
    [2014-01-25 06:32] [PACMAN] installed anjuta (3.10.2-2)
    [2014-01-25 06:32] [PACMAN] installed bijiben (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed cdrkit (1.1.11-3)
    [2014-01-25 06:32] [PACMAN] installed libmad (0.15.1b-7)
    [2014-01-25 06:32] [PACMAN] installed libao (1.1.0-3)
    [2014-01-25 06:32] [PACMAN] installed cdrdao (1.2.3-6)
    [2014-01-25 06:32] [PACMAN] installed dvd+rw-tools (7.1-4)
    [2014-01-25 06:32] [PACMAN] installed brasero (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] reinstalled cheese (3.10.2-2)
    [2014-01-25 06:32] [PACMAN] installed gtkhtml4 (4.6.6-1)
    [2014-01-25 06:32] [PACMAN] installed libpst (0.6.58-2)
    [2014-01-25 06:32] [PACMAN] installed libytnef (1.5-3)
    [2014-01-25 06:32] [PACMAN] installed evolution (3.10.3-1)
    [2014-01-25 06:32] [PACMAN] installed p7zip (9.20.1-9)
    [2014-01-25 06:32] [PACMAN] installed file-roller (3.10.2.1-1)
    [2014-01-25 06:32] [PACMAN] installed five-or-more (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed four-in-a-row (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gedit (3.10.4-1)
    [2014-01-25 06:32] [PACMAN] installed glu (9.0.0-2)
    [2014-01-25 06:32] [PACMAN] installed gnome-chess (3.10.3-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-clocks (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] reinstalled gnome-color-manager (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-devel-docs (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed libzapojit (0.0.3-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-online-miners (3.10.3-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-documents (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-getting-started-docs (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-klotski (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-mahjongg (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-maps (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-mines (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed libdmapsharing (2.9.23-1)
    [2014-01-25 06:32] [PACMAN] installed python-dbus-common (1.2.0-2)
    [2014-01-25 06:32] [PACMAN] installed python-dbus (1.2.0-2)
    [2014-01-25 06:32] [PACMAN] installed gnome-music (3.10.1-2)
    [2014-01-25 06:32] [PACMAN] installed idnkit (1.0-3)
    [2014-01-25 06:32] [PACMAN] installed dnssec-anchors (20130320-1)
    [2014-01-25 06:32] [PACMAN] installed dnsutils (9.9.2.P2-1)
    [2014-01-25 06:32] [PACMAN] installed libidn (1.28-2)
    [2014-01-25 06:32] [PACMAN] installed whois (5.1.0-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-nettool (3.8.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-nibbles (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed babl (0.1.10-1)
    [2014-01-25 06:32] [PACMAN] installed gtk2 (2.24.22-1)
    [2014-01-25 06:32] [PACMAN] installed libspiro (20071029-3)
    [2014-01-25 06:32] [PACMAN] installed gegl (0.2.0-10)
    [2014-01-25 06:32] [PACMAN] installed gnome-photos (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-robots (3.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-sudoku (3.10.2-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-tetravex (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed gnome-weather (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed iagno (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] installed lightsoff (3.10.1-1)
    [2014-01-25 06:32] [PACMAN] reinstalled nautilus-sendto (3.8.1-1)
    [2014-01-25 06:32] [PACMAN] installed python-atspi (2.10.0-1)
    [2014-01-25 06:32] [PACMAN] installed dotconf (1.3-4)
    [2014-01-25 06:32] [PACMAN] installed speech-dispatcher (0.8-2)
    [2014-01-25 06:32] [PACMAN] installed liblouis (2.5.2-2)
    [2014-01-25 06:32] [PACMAN] installed tcl (8.6.1-1)
    [2014-01-25 06:32] [PACMAN] installed cython (0.20-1)
    [2014-01-25 06:32] [ALPM-SCRIPTLET] Please add your user to the brlapi group.
    [2014-01-25 06:32] [PACMAN] installed brltty (4.5-6)
    [2014-01-25 06:32] [PACMAN] installed orca (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed quadrapassel (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed gssdp (0.14.6-1)
    [2014-01-25 06:33] [PACMAN] installed gupnp (0.20.9-1)
    [2014-01-25 06:33] [PACMAN] installed gupnp-av (0.12.4-1)
    [2014-01-25 06:33] [PACMAN] installed gupnp-dlna (0.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed xdg-utils (1.1.0.git20140109-1)
    [2014-01-25 06:33] [PACMAN] installed rygel (0.20.3-1)
    [2014-01-25 06:33] [PACMAN] installed seahorse (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed swell-foop (3.10.1-1)
    [2014-01-25 06:33] [PACMAN] installed tali (3.10.2-1)
    [2014-01-25 06:33] [PACMAN] installed gtk-vnc (0.5.3-3)
    [2014-01-25 06:33] [PACMAN] installed celt0.5.1 (0.5.1.3-3)
    [2014-01-25 06:33] [PACMAN] installed libiscsi (1.7.0-2)
    [2014-01-25 06:33] [ALPM-SCRIPTLET] vde config files should be placed in /etc/vde, sample files are provided.
    [2014-01-25 06:33] [ALPM-SCRIPTLET] iptables and dhcpd sample files have been installed to '/usr/share/vde2'.
    [2014-01-25 06:33] [ALPM-SCRIPTLET] Merge those examples, if needed to the according config files.
    [2014-01-25 06:33] [PACMAN] installed vde2 (2.3.2-5)
    [2014-01-25 06:33] [PACMAN] installed libcacard (1.7.0-1)
    [2014-01-25 06:33] [PACMAN] installed usbredir (0.6-4)
    [2014-01-25 06:33] [PACMAN] installed spice-gtk3 (0.22-1)
    [2014-01-25 06:33] [PACMAN] installed vinagre (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 06:36] [PACMAN] reinstalled baobab (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled empathy (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-desktop (1:3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-icon-theme (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled eog (3.10.2-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-themes-standard (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled epiphany (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled evince (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-session (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-settings-daemon (3.10.2-3)
    [2014-01-25 06:36] [PACMAN] reinstalled mutter (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-shell (3.10.3-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gdm (3.10.0.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-backgrounds (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-calculator (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-contacts (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-control-center (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-dictionary (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-disk-utility (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-font-viewer (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-keyring (3.10.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-screenshot (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-shell-extensions (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-system-log (3.9.90-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-system-monitor (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-terminal (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled yelp (3.10.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-user-docs (3.10.2-1)
    [2014-01-25 06:36] [PACMAN] reinstalled gnome-user-share (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled grilo-plugins (0.2.9-3)
    [2014-01-25 06:36] [PACMAN] reinstalled gucharmap (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled mousetweaks (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled nautilus (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled sushi (3.10.0-1)
    [2014-01-25 06:36] [PACMAN] reinstalled totem (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled totem-plugin (3.10.1-1)
    [2014-01-25 06:36] [PACMAN] reinstalled tracker (0.16.4-1)
    [2014-01-25 06:36] [PACMAN] reinstalled vino (3.10.1-2)
    [2014-01-25 06:36] [PACMAN] reinstalled xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 06:37] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 06:37] [PACMAN] reinstalled baobab (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled empathy (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-desktop (1:3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-icon-theme (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled eog (3.10.2-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-themes-standard (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled epiphany (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled evince (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-session (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-settings-daemon (3.10.2-3)
    [2014-01-25 06:37] [PACMAN] reinstalled mutter (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-shell (3.10.3-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gdm (3.10.0.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-backgrounds (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-calculator (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-contacts (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-control-center (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-dictionary (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-disk-utility (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-font-viewer (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-keyring (3.10.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-screenshot (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-shell-extensions (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-system-log (3.9.90-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-system-monitor (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-terminal (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled yelp (3.10.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-user-docs (3.10.2-1)
    [2014-01-25 06:37] [PACMAN] reinstalled gnome-user-share (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled grilo-plugins (0.2.9-3)
    [2014-01-25 06:37] [PACMAN] reinstalled gucharmap (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled mousetweaks (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled nautilus (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled sushi (3.10.0-1)
    [2014-01-25 06:37] [PACMAN] reinstalled totem (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled totem-plugin (3.10.1-1)
    [2014-01-25 06:37] [PACMAN] reinstalled tracker (0.16.4-1)
    [2014-01-25 06:37] [PACMAN] reinstalled vino (3.10.1-2)
    [2014-01-25 06:37] [PACMAN] reinstalled xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 06:49] [PACMAN] Running 'pacman -R nvidia'
    [2014-01-25 06:49] [PACMAN] removed nvidia (331.38-2)
    [2014-01-25 06:50] [PACMAN] Running 'pacman -S xserver-xorg-video-intel'
    [2014-01-25 06:50] [PACMAN] Running 'pacman -S xserver'
    [2014-01-25 06:50] [PACMAN] Running 'pacman -S video-intel'
    [2014-01-25 06:52] [PACMAN] Running 'pacman -S xf86-video-intel'
    [2014-01-25 06:52] [PACMAN] removed nvidia-libgl (331.38-1)
    [2014-01-25 06:52] [PACMAN] installed mesa-libgl (10.0.2-1)
    [2014-01-25 06:52] [PACMAN] installed intel-dri (10.0.2-1)
    [2014-01-25 06:52] [PACMAN] installed libxvmc (1.0.8-1)
    [2014-01-25 06:52] [PACMAN] installed glamor-egl (0.5.1.r258-1)
    [2014-01-25 06:52] [ALPM-SCRIPTLET] >>> This driver uses SNA as the default acceleration method. You can
    [2014-01-25 06:52] [ALPM-SCRIPTLET] fall back to UXA if you run into trouble or test experimental
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Glamor acceleration. To do so, save a file with the following
    [2014-01-25 06:52] [ALPM-SCRIPTLET] content as /etc/X11/xorg.conf.d/20-intel.conf :
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Section "Device"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Identifier "Intel Graphics"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Driver "intel"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] Option "AccelMethod" "sna"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] #Option "AccelMethod" "uxa"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] #Option "AccelMethod" "glamor"
    [2014-01-25 06:52] [ALPM-SCRIPTLET] EndSection
    [2014-01-25 06:52] [PACMAN] installed xf86-video-intel (2.99.907-2)
    [2014-01-25 06:58] [PACMAN] Running 'pacman -R xf86-video-intel'
    [2014-01-25 06:58] [PACMAN] removed xf86-video-intel (2.99.907-2)
    [2014-01-25 06:58] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 06:59] [PACMAN] Running 'pacman -R mesa-libgl'
    [2014-01-25 06:59] [PACMAN] Running 'pacman -R gnome'
    [2014-01-25 07:00] [PACMAN] Running 'pacman -R gnome-extra gnome'
    [2014-01-25 07:00] [PACMAN] Running 'pacman -R gnome-extra'
    [2014-01-25 07:01] [PACMAN] Running 'pacman -Rdd gnome gnome-extra'
    [2014-01-25 07:01] [PACMAN] removed vinagre (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed tali (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed swell-foop (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed seahorse (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed rygel (0.20.3-1)
    [2014-01-25 07:01] [PACMAN] removed quadrapassel (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed orca (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed lightsoff (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed iagno (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-weather (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-tetravex (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-sudoku (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-robots (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-photos (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-nibbles (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-nettool (3.8.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-music (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-mines (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-maps (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-mahjongg (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-klotski (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-getting-started-docs (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-documents (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-devel-docs (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-clocks (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-chess (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed gedit (3.10.4-1)
    [2014-01-25 07:01] [PACMAN] removed four-in-a-row (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed five-or-more (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed file-roller (3.10.2.1-1)
    [2014-01-25 07:01] [PACMAN] removed evolution (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed brasero (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed bijiben (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed anjuta (3.10.2-2)
    [2014-01-25 07:01] [PACMAN] removed devhelp (3.10.0-1)
    [2014-01-25 07:01] [ALPM-SCRIPTLET]
    [2014-01-25 07:01] [ALPM-SCRIPTLET] (gconftool-2:798): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
    [2014-01-25 07:01] [ALPM-SCRIPTLET] Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    [2014-01-25 07:01] [PACMAN] removed aisleriot (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed accerciser (3.8.2-1)
    [2014-01-25 07:01] [PACMAN] removed xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 07:01] [PACMAN] removed vino (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed tracker (0.16.4-1)
    [2014-01-25 07:01] [PACMAN] removed totem-plugin (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed totem (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed sushi (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed nautilus (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed nautilus-sendto (3.8.1-1)
    [2014-01-25 07:01] [PACMAN] removed mousetweaks (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gucharmap (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed grilo-plugins (0.2.9-3)
    [2014-01-25 07:01] [PACMAN] removed gnome-user-share (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-user-docs (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed yelp (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-terminal (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-system-monitor (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-system-log (3.9.90-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-shell-extensions (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-screenshot (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-keyring (3.10.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-font-viewer (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-disk-utility (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-dictionary (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-control-center (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-color-manager (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-contacts (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-calculator (3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-backgrounds (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed gdm (3.10.0.1-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-shell (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed mutter (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-settings-daemon (3.10.2-3)
    [2014-01-25 07:01] [PACMAN] removed gnome-session (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed evince (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed epiphany (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-themes-standard (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed eog (3.10.2-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-icon-theme (3.10.0-1)
    [2014-01-25 07:01] [PACMAN] removed gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] removed empathy (3.10.3-1)
    [2014-01-25 07:01] [PACMAN] removed cheese (3.10.2-2)
    [2014-01-25 07:01] [PACMAN] removed gnome-desktop (1:3.10.2-1)
    [2014-01-25 07:01] [PACMAN] removed baobab (3.10.1-1)
    [2014-01-25 07:01] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 07:02] [PACMAN] Running 'pacman -Rdd nvidia-utils mesa-libgl'
    [2014-01-25 07:02] [PACMAN] removed mesa-libgl (10.0.2-1)
    [2014-01-25 07:02] [PACMAN] removed nvidia-utils (331.38-1)
    [2014-01-25 07:02] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 07:03] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-01-25 07:04] [PACMAN] installed nvidia-304xx-utils (304.117-1)
    [2014-01-25 07:04] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-01-25 07:04] [PACMAN] installed nvidia-304xx (304.117-4)
    [2014-01-25 07:04] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 07:04] [PACMAN] installed baobab (3.10.1-1)
    [2014-01-25 07:04] [PACMAN] installed gnome-desktop (1:3.10.2-1)
    [2014-01-25 07:04] [PACMAN] installed cheese (3.10.2-2)
    [2014-01-25 07:04] [ALPM-SCRIPTLET] To use Empathy you need to install at least one Telepathy connection manager.
    [2014-01-25 07:04] [PACMAN] installed empathy (3.10.3-1)
    [2014-01-25 07:04] [PACMAN] installed gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-icon-theme (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed eog (3.10.2-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-themes-standard (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed epiphany (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed evince (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-session (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-settings-daemon (3.10.2-3)
    [2014-01-25 07:05] [PACMAN] installed mutter (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-shell (3.10.3-1)
    [2014-01-25 07:05] [PACMAN] installed gdm (3.10.0.1-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-backgrounds (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-calculator (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-contacts (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-color-manager (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-control-center (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-dictionary (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-disk-utility (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-font-viewer (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-keyring (3.10.1-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-screenshot (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-shell-extensions (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-system-log (3.9.90-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-system-monitor (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-terminal (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed yelp (3.10.1-2)
    [2014-01-25 07:05] [PACMAN] installed gnome-user-docs (3.10.2-1)
    [2014-01-25 07:05] [PACMAN] installed gnome-user-share (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed grilo-plugins (0.2.9-3)
    [2014-01-25 07:05] [PACMAN] installed gucharmap (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed mousetweaks (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed nautilus-sendto (3.8.1-1)
    [2014-01-25 07:05] [PACMAN] installed nautilus (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed sushi (3.10.0-1)
    [2014-01-25 07:05] [PACMAN] installed totem (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed totem-plugin (3.10.1-1)
    [2014-01-25 07:05] [PACMAN] installed tracker (0.16.4-1)
    [2014-01-25 07:05] [PACMAN] installed vino (3.10.1-2)
    [2014-01-25 07:05] [PACMAN] installed xdg-user-dirs-gtk (0.10-1)
    [2014-01-25 07:13] [PACMAN] Running 'pacman -Syu'
    [2014-01-25 07:13] [PACMAN] synchronizing package lists
    [2014-01-25 07:14] [PACMAN] Running 'pacman -Syu'
    [2014-01-25 07:14] [PACMAN] synchronizing package lists
    [2014-01-25 07:14] [PACMAN] starting full system upgrade
    [2014-01-25 07:14] [PACMAN] upgraded jack (0.121.3-7 -> 0.124.1-1)
    [2014-01-25 07:16] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 07:45] [PACMAN] Running 'pacman -S intel-dri xf86-video-intel bumblebee nvidia'
    [2014-01-25 07:46] [PACMAN] Running 'pacman -S intel-dri xf86-video-intel bumblebee nvidia'
    [2014-01-25 07:46] [PACMAN] removed nvidia-304xx-utils (304.117-1)
    [2014-01-25 07:46] [PACMAN] removed nvidia-304xx (304.117-4)
    [2014-01-25 07:46] [PACMAN] installed mesa-libgl (10.0.2-1)
    [2014-01-25 07:46] [PACMAN] reinstalled intel-dri (10.0.2-1)
    [2014-01-25 07:46] [ALPM-SCRIPTLET] >>> This driver uses SNA as the default acceleration method. You can
    [2014-01-25 07:46] [ALPM-SCRIPTLET] fall back to UXA if you run into trouble or test experimental
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Glamor acceleration. To do so, save a file with the following
    [2014-01-25 07:46] [ALPM-SCRIPTLET] content as /etc/X11/xorg.conf.d/20-intel.conf :
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Section "Device"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Identifier "Intel Graphics"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Driver "intel"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Option "AccelMethod" "sna"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] #Option "AccelMethod" "uxa"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] #Option "AccelMethod" "glamor"
    [2014-01-25 07:46] [ALPM-SCRIPTLET] EndSection
    [2014-01-25 07:46] [PACMAN] installed xf86-video-intel (2.99.907-2)
    [2014-01-25 07:46] [PACMAN] installed virtualgl (2.3.3-1)
    [2014-01-25 07:46] [ALPM-SCRIPTLET] Don't forget to add yourself to the 'bumblebee' group to use Bumblebee
    [2014-01-25 07:46] [PACMAN] installed bumblebee (3.2.1-3)
    [2014-01-25 07:46] [PACMAN] installed nvidia-utils (331.38-1)
    [2014-01-25 07:46] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-01-25 07:46] [PACMAN] installed nvidia (331.38-2)
    [2014-01-25 07:49] [PACMAN] Running 'pacman -S gnome'
    [2014-01-25 07:49] [PACMAN] reinstalled baobab (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled empathy (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-desktop (1:3.10.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-icon-theme-symbolic (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-icon-theme (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled eog (3.10.2-2)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-themes-standard (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled epiphany (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled evince (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-session (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-settings-daemon (3.10.2-3)
    [2014-01-25 07:49] [PACMAN] reinstalled mutter (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-shell (3.10.3-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gdm (3.10.0.1-2)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-backgrounds (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-calculator (3.10.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-contacts (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-control-center (3.10.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-dictionary (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-disk-utility (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-font-viewer (3.10.0-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-icon-theme-extras (3.6.2-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-keyring (3.10.1-2)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-screenshot (3.10.1-1)
    [2014-01-25 07:49] [PACMAN] reinstalled gnome-shell-extensions (3.10.1-1)
    [2014-01-25

  • Rather than persists in the future thread...

    The point I was making would be for Archs documents to pick up where man pages leave off, but whatever.
    If you think I stated Arch must fix man pages, not so. I was intending to show that docs as a whole, leave whole subjects unhandled, Arch could provide the answers in its own docs and come out as a hero.
    Or maybe not.
    And remember, users who cannot configure ppp cannot get on the internet to get the ppp configuration docs. Or any other docs, for that matter. One failed configuration needing web documents might leave the newbie stranded.
    Or maybe not.
    I personally think that a lot of configuration has to be made before Linux (Arch or others) will communicate over the internet to a remote website, so as to allow documentation to be visible..... but hey, maybe I missed something? Like the document to get a modem setup? So I could get web based documents? Chicken and egg?
    Maybe not, eh?
    As for the concept of needing to be an experienced admin - these folks usually do not need any docs. That compares to bad docs to a newbie - essentially no docs. Missing docs and no internet access are also useless. Thus, the newbie without documents needs the only thing which gets anyone else through the issue - the newbie needs experience, because the docs are weak or missing or erroneous. Try as you might, that is an issue I went through. Take, for example, when I needed network assistance. Archs forums were not the first place I went asking for help, believe me; I asked and am still asking. 2 years now, and I'm just getting told Samba. Need I say this is baloney? That issue is not Archs fault, but Arch could have a smashing success on its hands if it were to document a few critical areas as well as 0.2 was documented.
    Installing and partitioning... What can I say... apeiro is not mentioning anything I've PM'd him about: secondary hard disks getting reformatted. My pm brought me the answer that most Archers never repartition, so the script was.... well, I guess you could say it was a shot in the dark. Fine, but the PM stated the alternative was something like 'I usually use the commandline stuff and simply reformat the existing partitions'.
    Why the **** would an inexperienced newbie set up partitions outside of using the installer?? The Arch docs tells the newbie to use the installer to partition their hard disks! What, exactly, is the newbies idea of an installers purpose? Are you a newbie when you decide what a newbie has for skills? The installer obliterated gigabytes of data, I trusted that it was going to perform safely, and yet nobody ever used it to learn of the glitch? Ooookkaaaaayyyy.
    Folks, the docs said to use the installer. Never mentioned possibly partitioning from the command line. Take your pick, the newbie was not at fault for following the docs.
    I'll run along, because I cannot possibly be speaking truth. Neither am I telling you where I had problems. This is cannot be feedback, it must be dunbars rantings. Does Arch have a future when feedback is considered trolling or flaming the developers? Lighten up, folks, I had once been trying to offer help and sought to get help.
    I know this is a labor of love for you all; in many ways, Linux is a labor of mine as well. Sadly, you are not hearing some issue that could help make Arch the distro that some folks want it to be.

    dunbar wrote:Step by step: I mentioned a few weak areas that newbies would not know how to address.
    I mentioned that newbie would not necessarily have the skills to get the correct docs from a myriad of websites.
    Which appear (and frequently are) obsolete.
    Well, then we include the docs and then non-newbies would complain that we are cluttering the filesytem and you would complain because those documents are obsolete. sound familiar? i have seen this argument before and there is not winning it. people bitch about the manpages, docs, etc ALL THE TIME. you must know that. so the best we can do is add your concerns to our own documents and add necessary documents to the files.
    When their internet connection was what had failed, the internet doc is not available.
    And when they had no Xwindows in which to read HTML documents,
    and nothing tells the newbie about CLI browsers.
    i would expect that no absolute green newbies would try arch so those newbies that do show up i would assume have some linux experience (one can be a newbie and have some experience) so i would assume that they would know about lynx or links browsers or at least know how to use cat and less.
    another point about this is that if a newbie does not even know how to use cat, less, or a cli editor to view files then they would be very very f**ked with arch linux and having self contained documents would be pretty pointless. so again i would ask is it not wise to print out/write down any relevent install/configuration instructions? you do know how to write since you already say you don't have a printer?
    okay so if we include install configuration data in the installer will you know how to access it? is it fair to tell the user that it is in such and such directory and you can access it through say vc1-4? should we scrap our online docs altogether and just have them self contained?
    The network thing was changed along the way - IPX/SPX was part of the issue, my 5 port switch is another part. I am not berating you, sarah31, nor am I asking anyone to re-write man pages, etc. as several posts seemed to attribute to me. The man pages are the weak spot, Arch docs need to go from there. Never wanted to say more than that.
    and all i wanted to know is what apps do we extend our documentation to? all of them? are you saying that all our apps need extended docs? can you point me to one distro that has extended documents of all their applications? besides ppp what would YOU extend? it is fair to ask this of arch developers/users but they really need to know just what manpages are defunct and have no bearing on arch.
    i would not expect a request like this would get fulfilled too quickly there are lots of applications' man pages and docs to go through then the developers would have to determine what is needed and what is not.
    as for manpages......i used to find them unreliable but to be honest most manpages i have viewed lately have been very clear and concise about how to operate/configure apps. i am not saying this to contradict you but i say it honestly. when i have been unable to find someone to ask on this forum or irc manpages normally do the trick for me. (and don't say it is because i am some expert with linux because i a definitely not)
    I'm trying to point out that A] with a presumed goal of gaining Linux users,
    B] Arch, being small, uncluttered and likely attractive to newbies (small draws newbies because it is so small (dialup accessible but only one big download at a time) and older systems where XP won't fit on their disks, etc) and also
    C] since Arch had very tight documents covering what needed to be done (but might need more topics covered), I felt that was likely going to lead to newbies arriving here in some situations that
    D] Arch clearly tries to assume will not need the attentions of forum members (which have the skills) and
    E] the newbie does not have the skills.
    That would lead to the assumption that Arch was not interested in the users needs.
    with respect to this.....well what can i say but you are a complete ***hole. for one thing small does not always attract newbies in fact i know ALOT ALOT ALOT of people that will not even try arch or similar distros because they are small. most people want the choice to kludge up their system if they like but arch is not in this realm yet because we do not offer alot of packages.
    i agree we need more stuff covered in our documents and you would not find a single user or developer that would disagree with you. So i guess this point you make throws out your idea of extending the manpages because that is not a concise project (for example manpages for transcode are good but to get into all the basics a newbie would need to know would require one to be alot more verbose similarily with networking documents)?
    to say that we here do not pay attention to users is ABSOLUTELY THE WRONG ANSWER. there are only two pages of unanswered post and considering there are always post that are merely statements that do not need to be answered that is very good. in fact if you even bothered to check there are only 79 unanswered posts out of 4512. that's 1.75% of the posts on the forum are unanswered. besides that there are always questions that no one has an answer to. obscure problems do exist i know i have hit many in my ventures in any OS.
    besides this forums are a free service. no one is under obligation to use it user AND developers alike. no one is paid here so don't diss anyone and don't feel that anyone is obligated to answer you.
    i can also say that you are a complete arrogant ass for saying arch does not care about its users. we don't care about you that is for certain. but i can guarantee that everything i did every package i made, upgraded, donated, fixed, etc was for the user. people wanted openoffice i spent a week building it then it got broken with the upgrade to gcc 3.3 i spent another week trying to fix it without luck then judd spent 3 days compiling and patching 1.1. so do you EVER say we don't fucking care you little ingrate.
    The perceived 'lack of clarity' on my part is because I am still a newbie. I might have a few things working under Slackware, but I'm not certain, today, where I even made the changes. I'm not asking for hints on how to keep a notebook, I have one, it is 40 miles away, I cannot discuss Linux by reading my notes or grepping my config files, they are 40 miles away. I cannot log into my Linux PC, I only have dial up, the only telephone line in my house is for voice communications. DSL is too far away, Cable is too expensive.... have I never said any of this before? No, not in this thread, but I've always been a hardliner on those points sarah31. I do not match up with what is assumed of me. But here I am, posting, despite my ineptitude.
    "Waaagh i'm a newbie. waggh i don't have highspeed pity me pity meee!"
    there are lots of users on dialup here including developers so we don't give a flying f**k.
    I believe the deepest undercurrent I see here is diverging viewpoints of what Arch is and diverging goals for Arch. My views are different from a few who assume the Archer has the skills, hApy seems to have a third viewpoint, and yet a third viewpoint exists.
    yeah and you are saying we have to conform to your view. typical. funny we seem to be getting more and more users all the time both newbie and non newbie and this despite having a completely uncaring development team and a horrendous set of docs. one of the funny things is that many of the newbies recently are all dialup like you and they still take time to make irc interesting or contribute packages.
    If my posts reflect an atmosphere of bewildering viewpoiints, I'm not surprised - I've tried to reply to differing posts which take differing opinions; I suppose it is frustrating to anyone to reply to 3 posts at once. I'm replying in order to offer my view of when I was a frustrated newbie (this morning, I think ;-) ). Remember, I was told by a certain forum member that, most certainly, dunbar was a slackware user and the assumption was that he must be nearly expert - yet, I declared, no, I'm not an expert and I freely admit a lack of skills. I was not the one who estimated dunbars skills, Sarah31.
    oh you are soooo subtle in your insults. come on you tell me after hundreds of installs and two years of using linux you don't know anything? find me five green newbies that know how to grep or know to look online for information. personally i and many others here and elsewhere have little time for someone who cries about being a newbie when they obviously aren't.
    what is it some sort of ploy to make people feel sorry for you or shorten your look online for info that you likely could find in two minutes? spare me. up to one year you are a n00b after that you are not.
    I'm definitely not interested in dissing anyone, not you, nor Gyroplast, nor Apeiro, nor hApy .....
    hmmm you care to stand by that or should i pull out several quotes to the contrary?
    I have pointed out that early on, Arch was interested in being Judds perfect distro... did anyone ask him if he ever said that? As I said, I can offer to cut and paste, if you wish.
    so your point is? is this a bad thing? is it not possible for many of us to believe it is the perfect distro for us as well? why not diss yoper for claiming to be THE distro.
    Yet, I'm clearly getting 2 viewpoints in response to me repeating that fact. Thus, in order to push the reader away from their position, so as to get them to walk in my shoes, I post from different directions aiming toward one central condition. Is the issue me, and me alone? Or did the issue exist, and I'm guilty of responding to all viewpoints and thus I'm guilty of pointing it out?
    i have been in your shoes and i often get put back in your shoes when i start to use or investigate applications or areas of linux i have never explored before. so whats your point? if it was to fix up the documentation? that was a goal for some time now in fact a few users have made it an ongoing thing.
    you are not the only one that is a newbie here nor are you the only one here. there are many things that developers must balance when they do their duties. there will never be a distro that will satisfy all a user's needs but i can tell you that the arch team does try to please as many people as possible. so yeah i think you are the issue to some extent. you could have come in here and politely explained what it is that you felt needed improvement but instead you came in and whine and cried that you were so abused and that we had to change to please you. it was all about you anyone can easily extract that from the way you keep flipping between i'm a newbie, i'm not a newbie but i speak for newbies. if you cannot find the offesive comments you have made along the way or see how some people came to the conclusions they did then it is your fault.
    Anyway, you mentioned the ethernet thread.... thydian is evidently new here. Lets explain that issue out loud (since you already raised the matter). I offered to write a document regarding Ethernet setup, I was not shown what to do (frozdsolid posted that they were "pretty sure that's necessary"). I do not assume that every member here reads every posted message; thus, I believe I had read the opinion of someone who was as newbie to Arch as I myself was a newbie (frozdsolids title still shows only 4 posts even today). Nobody here 'handed me an answer' as some might conclude from your post.
    well YOU may not have gotten answer but people DID try to answer your question and, in fact, the answer is there. but you could not extract it or did not know how to ask the question properly to get the result you desired.
    but of course we are the bad guys here because we took the time to try and give you an answer. man you are such a wanker....
    I posted everywhere else on the internet about my situation using IPX/SPX, I heard that it was a dead protocol. I finally found information about IPX/SPX, it was not herein, so the forum was of no use in that instance - that is a fact, sarah31. Now that I have concluded that IPX/SPX was not the best choice and changed the rest of the household over to TCP/IP...... the IPX/SPX issue is no longer the focus, so I dropped the subject; until I was  6 months later, I came back here, saw BluPhoenixs post and was a bit confused. That lead to him suggesting DOSemu, I stated no, that was not preferred, etc. etc. I ultimately thanked BluPhoenix, stated why I was going to drop the issue, and I left the thread cold.
    so why insist on blaming us for something that we tried to answer but was obviously beyond our knowledge? you did it at the end of that thread and you constantly do it here. how many other people did you verbally assault along the way?
    The whole thing got misdirected, away from what I was asking for, as if the topic was no longer my decision alone.
    what a pile of BS. it was YOUR thread so get in there and assert yourself. threads get out of hand sometimes but the original poster can easily get control again if they have a pair.
    i know for a fact that the people he chose to insult would and have tried to help him but he blows them off. i know too that the head developer is VERY open to user contributions yet dunbar chose not to contribute.
    The reasons should be evident by now - when I offered to contribute, I had the time; 6 months of time transpired, I was not able to write because I had no answers with which to generate such a document. I had to revoke the offer. I am taken by surprise that anyone would say I was given the necessary information!
    BS again you just stated that you got your answer (outside of our forum) so you could have easily posted back with what you had found out and then provided documentation later. and you mean to tell me that you have not had time in the last six months to wing something together. shit you have practically written a novel here.
    it is obvious to me that you just want to guard that knowledge and us it to flame and troll here. once you had the answers you were sure to come back and flame that thread and continue flaming on a regular basis. what an ass.
    I've known you to be patient, sarah31 (and you are yet teaching me as I write), but when you say I'm taking great pains to insult someone - while I'm waiting months for forum responses and I'm reading internet documents that are obsolete and these are docs which talk about a different distro, refer to a different kernel, puts files in a different location????
    yeah so you waited for an answer and didn't get one...it happens. you stated that barely anyone knew the answer. fianlly you got one and then came back and rudely blamed us for poor documentation and a barrel of other things. nice guy.
    all i saw was orelein answer you in a nice and proper fashion and you called him eliteist. you also were rather rude about judd in your first post in the future thread. so yes i see all throughout attempts to belittle and brate and not one instance of sober commentary from you.
    and here you are again balming us for online docs that are not ours.
    That is not appropriate, ever, to assume that the newbie will not find older docs and will know enought to discard the incorrect ones.
    this is not limited to newbies.....it can definitely be difficult finding what you need online.
    And since most internet docs are coasting along since, for example, 1999 (re: the IPX/SPX how-to)
    well if you are checking out and obscure problem that is actually now obsolete then sure the fucking doc will be old but you make is sound like ALL docs are old. so i have to assume that you are very much an idiot because i have found most documentation for most current issues to have current docs. most applications will upgrade their docs as they upgrade or do you even notice that? are you to self absorbed to go around and find out if your wild accusations actually have any merit?
    once again, and I'll ask this, and directly of you, sarah31, why would any newbie assume that 4 year old document applied to their situation??
    well knowing how many newbies are i would expect them to ask if docs are relevant. or they could possibly look into some of the information. if it was not producing answers...wow i think they would ask for help again. shit do you even pay attention to how newbies act on justlinux?
    :oops: I'd ask that people remove useless web documents, but I fear that I'd get only 4 responses. That is reality, not sarcasm.
    hmmm remove docs, add docs which is it? fyi arch removes most docs except in rare circumstances. if those docs are html they are html. if a n00b doesn't know how to view them i expect they would ask( that is if they are outside x).
    dunbar...stick with slack because arch will never please you. slack is a very nice distro that should have the balance arch does not afford you. that is the great thing about a linux .... if you don't like one flavour then try another. just don't go back to the ice cream dealer and berate him for selling you your choice...get the point (if you don't then fine i expected that)

Maybe you are looking for