First tab will not close and address bar in tab does not update.
The first tab and its address bar are not working as expected. I am unable to close the first tab using the close icon on the tab or by selecting close tab from right click menu.
I also find that the address bar when displaying the first tab does not display the current web address, only text that has been previously written into the address bar field.
While trying to figure out a solution, I removed my themes and I closed the tabs I could, then clicked on the new tab button, doing so changed my original tab into an (Untitled) tab and created a new (Untitled) tab. I then found I couldn't close either tab, I clicked on new tab again, got a third (Untitled) tab, which again I couldn't close. I then closed Firefox choosing not to save. This appears to have fixed the problem; however I do not know which of the above action(s) resolved it.
Similar Messages
-
Can not delete emails and tool bar at top does not change over
Can not delete emails and tool bar at top does not change over from safari. HELP
If you hold the command key down (the one with the ⌘ on it) and hit the + key you can make the fonts larger. Might help out, I know as I've gotten up there in years I've had to use it more and more
In the mean time while twtwtw mulls this over, can you supply any further information? Did the system crash or didi anything change before you started having the problem? Are you really running 10.5.8 as your profile says?
We'll start with those for now,
regards
Message was edited by: Frank Caggiano BTW ⌘- - (command minus) will make the fonts smaller -
Address bar google search does not open in the current tab
When I do a address bar google search, the search window does not open in my current tab (which is usually a newly blank tab window), instead it opens in a previously opened tab window (or sometimes even a new tab), but never does the search appear in the current tab. When it does this, it ofteb replaces a web page which I can no longer view it without going backwards.
The only fix I have found is to open a new tab and go to Google's web page and search from there. But, this takes extra time and I have to remember to do this. Otherwise, I might lose web pages I wish to view.
This never used to happen until recently. I have a Mac using Lion for the past year.
Any help would be appreciated. Thanks, AnnaI appreciate your input, but I don't want the google web page to open in a new window.
Instead, I want to search using the address bar in using google to open the search in the tabbed webpage I am viewing, rather than open another tabbed webpage. When it opens in a different tab from the one I am in, it either creates a brand new tab, or more problematically, opens the search in an tabbed window which has an existing webpage I still want to access for viewing.
This is a Firefox issue. Address bar searching works as it should in Safari. -
Update ical and address book on iMac does not update iPhone or ipad
I have updated my ical and address book on my imac, but it is not updating my iphone or ipad, I have activated icloud on all machines, can anyone help please. Have looked at the forum, but cannot find my issue specifically. Regards
On the iPhone and iPad, tap Settings > iCloud
Switch Calendars and Contacts off then back on then reset the devices.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the boxes next to Calendars and Contacts then restart your iMac. -
I am using Macbook air 13". i have installed windows 7 professional on it. I downloaded windows support drivers using bootcamp. Even after installation of drivers my trackpad does not works. Tap & swipe features does not work.i am using a wireless mouse. Also there is no light in my keyboard anymore.
I did try all possible help i could found on internet. But no go.Hi Thank you, the apple mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
I tried this one but it did not work.
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28) -
But I think it still works since I hear noises inside the machine and the caps lock still lights up. It just won't start.
Hi, Toby. Welcome to Apple Support Communities.
Have you tried resetting the PMU?
http://support.apple.com/kb/HT1431?viewlocale=en_US
This is the first troubleshooting measure an Apple Authorized Service Provider would try. -
After runnng the 10.8.3 update on my newest IMac, a restart is requested. No matter how many times a restart is accomplished, the update remains flagged in the app store. About this Mac reports 10.8.2. The update was permormed on my other I-Mac and MBP without issue. Any suggestions on how to remedy this update issue?
Boot into Recovery and Repair the Disk and Repair permissions using Disk Utility. http://support.apple.com/kb/ht4718
Then, reboot and try the update again.
You also might try the Combo update: http://support.apple.com/kb/DL1640 -
Why does Firefox sometimes ask me if I want to save my tabs when I close, and sometimes it does not? I usually want to save them, so this is a pain. I'm on a Mac, OS 10.5.8
== This happened ==
A few times a week
== don't know...There can be various causes for this:
[[Firefox does not ask to save tabs and windows on exit]] -
I am trying to upgrade to Mavericks from 10.6.8. It tells me to close all open applications. However, Safari will not close and the installation cannot proceed. Any suggestions?
Either try to force quit Safari (press Command + Option + Escape keys and then choose force quit in the pop up window), or, you can also shut down the computer. Then boot up and open the app store application to download Mavericks - you don't need Safari for it.
-
My back button, print, and address bar are missing how do I get them back?
''duplicate - locking - https://support.mozilla.com/en-US/questions/865223''
tool bar went missing for unknown reason, no back button, no print button no address bar or bookmarks.''My back button, print, and address bar are missing''
Use "Alt" to make sure the menu bar is visible, then View > Toolbars > ... -- make sure that the Navigation bar is checkmarked, if tabs on top is confusing uncheck that, if you want to see menus and title bar make sure menu bar is check-marked.
If things don't stay put on the toolbars then
see http://kb.mozillazine.org/Corrupt_localstore.rdf
You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
Why can I not have the address bar appear when I installed Firefox 3.6?
Your "pictures" appeared and I had to choose one in order to continue. It would not clear unless I chose one. From then on, I could have no address bar, just Google, Yahoo, and in very dark bqckground which was hard to see. I tried everything; and finally gave up and deleted my Firefox. I have been a user for several years, but this one messed everything up. I could not get my addresses from the Express, and if I am going to have to use Outlook for the address book, I might as well just use Explorer! Give me some help (I have tried filling in the questions) and I will reinstall Firefox, I did like it a lot.
== This happened ==
Every time Firefox opened
== I was forced to chose one of your pictures. It took the place of your tool bar and address bar. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; FunWebProducts-MyWay; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?
I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!
-
I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?
You can't simply change the details.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button) -
Name and Address operator's packge do not have any values
Hi All,
I am using the Name and Address operator, but I do not have/want the 3rd party vendor's connector/tool/data library to work with my OWB.
I developed the map and deployed that map into my target.
Package got generated of name NAME_ADDRESS
In this package the entry point is the MAIN function, in the main function taking one parameter p_env.
When I execute the Package from SQL*Plus I am getting the value of p_env, which is wrong, p_env can not be NULL/0 at any case.
All I want is, how to pass/populate the value into p_env parameter, there will be more than one value into that parameter, param_value varchar2(30)and param_name varchar2(4000).
But I know nothing about what are the values may be in , when I execute the package...
ALSO I AM ATTACHING SOME MORE DETAILS....
create or replace package
FUNCTION Main(p_env IN WB_RT_MAPAUDIT.WB_RT_NAME_VALUES) RETURN NUMBER IS
end package
In this main function, the p_env is getting Initialize, it calls the initialize
procedure, there directly getting count on this parameter.
my question is at what point of time these valiables get initialize and what
are the exact details for the followings
TYPE WB_RT_NAME_VALUE IS RECORD
param_name varchar2(30),
param_value varchar2(4000)
TYPE WB_RT_NAME_VALUES IS TABLE OF
WB_RT_NAME_VALUE
INDEX BY BINARY_INTEGER;
What are these two variables (param_name and param_value) implies in wb_rt_mapaudit package
ANY HELP GREATLY APPRECIATED
THANKS FOR YOUR TIME
Gladson
[email protected]Gladson,
Page 8-73 of the Warehouse Builder user's guide explicitly highlights the following section:
Note: Taking advantage of the Name and Address operator requires separate licensing and additional installation steps. Refer to the Oracle9i Warehouse Builder Installation and Configuration Guide for more information.
The functionality that does the parsing and standardization is not part of Warehouse Builder, but part of the package that the software partner brings in. If you think about that, it actually makes sense. Would you expect Warehouse Builder to contain the code to perform this action for all countries across the globe, in all different languages and the like? The data vendors, who are the experts in the different areas, know this information.
So, if all you want to do, is parse and standardize an address, then yes, you may be better of going directly to a partner (having said that, you may get a discount if you are a Warehouse Builder customer, but that I do not know for sure).
However, what does Warehouse Builder add:
- Data object design (maybe your target tables don't exist) and deployment
- ETL design and code generation
- Process flow creation and deployment
- Execution management (automatic logging etc)
- Integration with Discoverer
- Metadata management, such as impact analysis, version management, multi language support...
- Much, much more.
Specific to name and address (or say data quality): if you include the name and address operator on a Warehouse Builder mapping, then you can plug in any partner library you want, and in case you find out that another partner delivers better results, then go with the other partner. At the end of the day, you abstracted the implementation from the design. That makes you much more flexible in your choice of a data vendor. Besides, you get impact analysis, lineage and lots of other metadata management features for free. On top of that, if you want to identify duplicates, perform householding and the like, then there is match and merge (which yes, is part of the tool and not a third-party implementation) in order to define the rules for matching and merging.
Again, if you don't need any of that, then perhaps you don't want the overhead of having all this and you go directly to a data vendor.
Hope this helps,
Mark. -
My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.
This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
1. Take off bottom case
2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
3. Press and hold power button for 5 seconds
4. Plug a charger in, and it should start booting up
5. After shutting down again, reconnect the battery and close the case up
6. It works! (hopefully, if you guys had the same situation I did)
Maybe you are looking for
-
So my two daughters (aged 7 & 9) each received an iPad for Christmas. They are interested in the same games and I installed them on their device. Because I registered both of their iPads on my iTunes account, when play these games they are "me". I
-
Problems with sun update connection server ?
recently I've been having problems with accessing the update connection web server. Can't get in with Firefox sometimes - get blank pages, or 401 error pages. Then today with IE, hitting the help page on the top right, I get: Sun ONE Application Serv
-
I cant edit song titles on my itunes!
I have tried multiple times hitting "get info" but it wont let me change anything, what should i do?
-
Sales return with warranty and without!
Hi, I have a scenario like sales return, 2 cases, with warranty and without warranty I need your guidance on controls, 1st case with warranty, Stock has been taken in to the plant with respect to sale return order. I generate service order SM01 (Non
-
Folder redirection (Desktop) not working sometimes
I'm having an issue where sometimes desktop redirection is not working properly. We have AD set to point the profile path to a local mandatory profile, with GP redirection set for several items, including desktop. However, about half the time when th