First the black screen of death now I'm getting blue screen of death please

Hi everybody I’m getting kernel panics here’s the panic log files
If I don’t respond to this message thats because my mac will not start. Could someone please tell me why my mac is panicking the error message is posted below.
panic.log:
Description: Panic (system crashes) log
Size: 3.44 KB
Last Modified: 8/2/06 8:42 PM
Location: /Library/Logs/panic.log
Recent Contents: Sun Jul 30 02:54:34 2006
panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 18=(reserved)), registers:
CR0: 0x8001003b, CR2: 0x00302020, CR3: 0x00d27000, CR4: 0x000006e0
EAX: 0x03a1d3c0, EBX: 0xcf48a552, ECX: 0x03662990, EDX: 0x0044d3c0
ESP: 0x24f03e48, EBP: 0x24f03e94, ESI: 0x00000005, EDI: 0x037ec3a0
EFL: 0x00010093, EIP: 0x0013d307, CS: 0x00000008, DS: 0x24f0001c
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x24f03d14 : 0x128b5e (0x3bc46c 0x24f03d38 0x131bbc 0x0)
0x24f03d54 : 0x19cadf (0x3c18e4 0x0 0x12 0x3c16a8)
0x24f03e04 : 0x197c7d (0x24f03e18 0x24f03e94 0x13d307 0x840048)
0x24f03e10 : 0x13d307 (0x840048 0x36b001c 0x367001c 0x24f0001c)
0x24f03e94 : 0x3904e1 (0x37ec3a0 0x3695a43 0xcf48a552 0x5)
0x24f03ec4 : 0x3902ba (0x3805dc0 0xcf48a552 0x5 0x198ce5)
0x24f03ef4 : 0x39010b (0x3805dc0 0x20 0xf4240 0x366e000)
0x24f03f14 : 0x87a627 (0x3805dc0 0x20 0x24f03f74 0x3662990)
0x24f03f34 : 0x38fe82 (0x366e000 0x3805dc0 0x8 0x19caf2)
0x24f03f84 : 0x13d683 (0x3805dc0 0x3695a42 0x24f03fd4 0x38ccc2)
0x24f03fd4 : 0x197b19 (0x0 0x0 0x3662c08 0xcf48a552) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBUHCI(2.5.6)@0x878000
dependency: com.apple.iokit.IOUSBFamily(2.5.6)@0x4fd000
dependency: com.apple.iokit.IOPCIFamily(2.0)@0x52c000
Kernel version:
Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
Wed Aug 2 20:42:05 2006
panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 18=(reserved)), registers:
CR0: 0x8001003b, CR2: 0x00605000, CR3: 0x00d27000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x0377d428, ECX: 0x03664ad0, EDX: 0x004a34b4
ESP: 0x00107de0, EBP: 0x00107e2c, ESI: 0x0377d428, EDI: 0x004a34b4
EFL: 0x00010012, EIP: 0x001334e6, CS: 0x00000008, DS: 0x00100010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x107cac : 0x128b5e (0x3bc46c 0x107cd0 0x131bbc 0x0)
0x107cec : 0x19cadf (0x3c18e4 0x0 0x12 0x3c16a8)
0x107d9c : 0x197c7d (0x107db0 0x107e2c 0x1334e6 0x130048)
0x107da8 : 0x1334e6 (0x130048 0x4a0010 0x10 0x100010)
0x107e2c : 0x134cb2 (0x377d428 0x0 0x107e7c 0x4a34b0)
0x107e4c : 0x13fa02 (0x377d428 0x0 0x107ebc 0x2)
0x107e8c : 0x38cd70 (0x4a34b0 0x37a9edc 0x0 0x36f029)
0x107eac : 0x960f4a (0x37a9ec0 0x107ecc 0x107efc 0x31f5f7)
0x107edc : 0x38f9f9 (0x234d2000 0x379d780 0x928e7e94 0x0)
0x107f1c : 0x3a0729 (0x379d780 0x0 0x3776800 0x0)
0x107f4c : 0x6765b2 (0x37c2b00 0x0 0x37c2b00 0x0)
0x107f7c : 0x676673 (0x370d700 0x0 0x370eb00 0x50)
0x107f9c : 0x5e5c01 (0x370d700 0x0 0x370eb00 0x50)
0x107fbc : 0x3acb56 (0x370e700 0x0 0x370e600 0x50)
0x107fec : 0x197d83 (0x50 0x24fa3e98 0x24fa3e98 0x2000007f)
0x24fa3f44 : 0x1991e4 (0x0 0x8 0xe75978 0x216) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleYukon(1.0.6b4)@0x95c000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x65e000
dependency: com.apple.iokit.IOPCIFamily(2.0)@0x52c000
com.apple.driver.AppleAPIC(1.1.0)@0x675000
com.apple.driver.AppleACPIPlatform(1.0.4)@0x5e4000
dependency: com.apple.iokit.IOPCIFamily(2.0)@0x52c000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5e0000
Kernel version:
Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386

Hello any Apple care technicians in the house ?

Similar Messages

Anyone else getting the BLACK screen of death after Kitkat 4.4 update?

Ever since the update, my phone is wacked, like everyone elses. I got my Samsung Galaxy S4 a month ago. Beautiful, loved it. Update happens: I want to pitch this thing as far as I can throw it.
The phone rings. I go to answer it but all I have is a BLACK SCREEN which is LOCKED. I have the lock on the screen, but if the screen is black, you can't see it - and you can't answer the phone! One day, I got a message, and could not get to that. Why? the BLACK SCREEN OF DEATH.
Someone told me to turn off Samsung Watch On and that has helped with some of the issues. But I still get the screen occasionally, and my battery life is GONE.
How do we get rid of this update? Should I just call Verizon and get a new phone with the OLD software? I hate this. I feel like I was the victim of bait and switch.

ltg123 - did you resolve the problem yet? If so, let me know how.
My (hopefully temporary) solution was to turn off my "Lock Screen" ... to do this, go to Settings, My Device, Lock Screen ... and select None.
The only issue is that you would no longer have any security for your phone and would be vulnerable to someone stealing your phone and having full access to whatever is on your phone that does not require a separate id and password. Dangerous, yes ... but, for me right now, it's better than not having any access to my own phone!
The Android update simply sucks ... some heads should roll for allowing such a crappy update to get (no pun intended) rolled out.

HT201210 I did the update on my phone and now it just keeps restarting itself over and over again. It will come up with the black screen and apple sign and shut off and bring that up again. What do I do?

First I did the update under general like I do every couple months. My phone came up with a screen, at the end of the update, that had a picture of the itunes icon and a picture of the iphone cord like I was supposed to connect to itunes. I did and itunes said that my phone needed to be "restored" to be reusable again, and the only option it gave me was to click the restore button. So I did and it went through a 30 minute restore session. Now my phone just shows the black screen with the apple icon and restarts over and over again. Clicking the buttons does nothing. It has been doing this for hours now. What do I do?

The screen is telling you to connect the iPod to your computer and restore via iTunes.
iTunes: Backing up, updating, and restoring iOS software

HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything

I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything. Any suggestions?

Is your iphone hacked/jailbroken?

Hello, my ipod nano 6th generation is with the black screen, now restored, already pressed for 8 seconds and decrease volume botação start and not resolved, can someone help?

Hello, my ipod nano 6th generation is with the black screen, now restored, already pressed for 8 seconds and decrease volume botação start and not resolved, can someone help?

I am currently having this same problem. This nano lasted me less than 2 years.

HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help.

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I'm sorry to learn that your phone is having problems starting up, marinema08. I'm sorry if this is incorrect, but are you using the original HTC Droid Incredible or a later Droid Incredible model? Please try placing your phone in Safe Mode to see if you are able to move past the Droid eye. http://vz.to/1kdQWVI If you are able to enable Safe Mode, please try deleting any recent applications you have added.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Does the black screen still happen in Tiger?

Has anybody who suffers from the black screen after wake-up problem upgraded to Tiger, and noticed any difference? Has it been solved?
I remember in much earlier threads that this problem seemed to be with Panther users of Jaguar weren't getting the issue. It certainly started for me after I upgraded to Panther...

In my Powerbook, now it happens to me every day. The sad story is that I used to suffer this with 10.2 and 10.3 and, I do not remember well, the problem disappeared with one of the updates of 10.3. The problem appeared again with 10.4, randomly, with some good days. I decided, 5 days ago, to make an erase and install of 10.4 (from 10.2 I have been always doing updates and keeping all my preferences). The problem now is worst than ever. My fresh 10.4.2 has never waked-up, always the black screen. My last resort, after trying lots of things, has been to put the energy saver settings of my PB to never sleep, and everytime I take the PB on the go I shut down it first. I am thinking about coming back to 10.3.9.

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

When I open bookmarks the actual sites sometime do not show just the black screen with the safari icon while others show the actual site how can I see the actual content

I use Safari Mt Lion and when I view Bookmarks, the entire list of bookmarks show uo but on the display portion only the black screen witht the Safari icon shows while other bookmarks show the actual photo of what that bookmark is so unless I click on the bookmark on the blank ones I can not see what it is, it is inconvient because I have hundreds of bookmarks and I can not remember what I was bookmarking it for unless I can see it

Hi
I understand - sorry to have missed your point before now.
Some sites don't display those previews in safari - secure pages (https) for one, and also sites that are redirected.
Taking the example in your screenshot, the site http://fabulouslyartsy.blogspot.com/ actually redirects to http://www.fabulouslyartsy.com/ and Safari (rather annoyingly) doesn't 'follow' the redirection & show the appropriate preview. See the image below - the blank preview is for the blogspot address, and the one visible to the right is from going directly to the site.

I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

Thanks Lucas,
I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info. My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone. Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple. I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

First the black screen of death now I'm getting blue screen of death please

Similar Messages

Maybe you are looking for