First time connection to internet -Nokia 610
Hi . Kindly help me guys. I bought a Nokia Lumia 610 and l need to know how to get connected to internet
@sting123
Provided that you have network data plan enabled unless you choose "custom setup" instead of going with defaults and disable data connection it should all be setup for you automatically.
Happy to have helped forum with a Support Ratio = 42.5
Similar Messages
-
I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?
It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.
-
First time connection, clueless user
Hello all and thanks for the help.
I just bought an Airport capsule I intend to use for the following:
- To back up 2 computers using Time machine
- To be able to exchange files between computers (or if easier) simply move files from one computer to the other using Time machine back ups - manually
SPECS
1. Computers:
- imac 3.2Ghz Intel Core i5, 16GB
- Brand new MacBook Pro 2.8 Dual Core Intel i5, 16GB
2. OS and software: All of them running 10.9.4, Time Machine 1.3, Airport Utility 6.3.2
3. Internet conection:
- A small, Comcast Netgear wireless router that has several opened Ethernet connections. To it there are two things connected: a Sonos system device and a cable connecting the router to the modem, but again, there are several slots opened
- A medium size, black, vertically resting DSLModem: Arris TM722 (there is only one Ethernet slot on this, and it is taken by a connection between it and the Comcast receiver)
QUESTIONS
1. How should I make the cable connections for first time set up of the capsule and for later ongoing use
2. This may be an unrelated to this topic, but FYI: the laptop is brand new, so I will need to bring some files and data from the iMac to the laptop, not sure what method will use... but may use a manual method from Time machine if possible.
THANKS
Alberto.The modem is not dsl, it is a cable modem with telephone ability.. the phone cables might be confusing you but there should be a thick coaxial cable going into the modem which is the cable connector.
Comcast Netgear wireless router
I am not aware of comcast supplying a wireless router.. if it is specifically from comcast you maybe stuck with it.. but i would try to plug the TC directly into the Arris modem.
Power cycle the modem.. this is more complex with your model if the battery is present.
The TC should be in standard router mode and the public IP should then be loaded onto the WAN interface of the TC.
No luck you will need to leave the netgear in place and plug the TC into that with ethernet.. but in this case you will bridge the TC instead of using it as router.
1. How should I make the cable connections for first time set up of the capsule and for later ongoing use
Ethernet is always best. Especially for the first backup.
Your new laptop may not even have an ethernet port. In which case wireless should be fine.. unless you want to buy the thunderbolt to ethernet adapter which is only around $40.
2. This may be an unrelated to this topic, but FYI: the laptop is brand new, so I will need to bring some files and data from the iMac to the laptop, not sure what method will use... but may use a manual method from Time machine if possible.
You can migrate your files.. this works well for most people.. but the disk size in the laptop might be SSD and small in which case yes, manually copy the files.. but don't use TM .. if you need to copy files there is no reason to use the TC at all.. the two computers linked over a network and you can copy files directly by sharing on one computer. -
New keyboard first time connection to a Mac
I am developing a hardware interface that enumerated like HID Keyboard. What I would like to know is how overcome the issue of having to press specific keys the first time the device is plugged in before the keyboard will work as normal. The reason is the interface will not have any standard keys access able by the user.
And since I had to create this example for other purposes earlier on, you get it at no extra charge :-)
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.Statement;
public class SimpleHsqlDbExample {
public static void main(String[] args)
throws Exception
System.out.println("Preparing connection");
Class.forName(DRIVER);
Connection conn = DriverManager.getConnection(URL,USERNAME,PASSWORD);
Statement stat = conn.createStatement();
System.out.println("Issuing DDL");
stat.execute(CREATE_TABLE);
stat.close();
System.out.println("Creating content");
PreparedStatement ps = conn.prepareStatement(CREATE_CONTENT);
for(int i = 0; i < 100; i++) {
ps.setInt(1,i);
ps.setString(2,"Example content: " + i);
ps.executeUpdate();
ps.close();
System.out.println("Acquiring the data");
ps = conn.prepareStatement(SELECT_CONTENT);
ps.setInt(1,42);
ResultSet rs = ps.executeQuery();
while(rs.next()) {
System.out.println("Retrieved data (" + rs.getString(1) + ")");
conn.close();
System.out.println("Done.");
private static final String URL = "jdbc:hsqldb:file:sprocdb;SHUTDOWN=true";
private static final String DRIVER = "org.hsqldb.jdbcDriver";
private static final String USERNAME = "sa";
private static final String PASSWORD = "";
private static final String CREATE_TABLE = "CREATE TABLE example (id integer primary key, content varchar(32) not null)";
private static final String CREATE_CONTENT = "INSERT INTO example(id,content) VALUES (?,?)";
private static final String SELECT_CONTENT = "SELECT content FROM example WHERE id = ?";
} -
Ipod shuffle 4th gen only syncs first time connected
My ipod shuffle wont sync, charge, or be recognized by my computer! I'm on a late 2006 Macbook pro with all current software. (itunes 10.1.2 and mac os 10.6.6)
I just bought my ipod shuffle 4th generation and am having difficulties syncing it. The first time I plugged it in it showed up in finder, showed up in itunes, the little orange light on the ipod went on, and I successfully put some of my music onto it.
A day later when I plugged it in to put some more music on it my computer did not recognize it at all: it didnt show up in finder, it didnt show up in itunes, and the orange light didnt come on. I have checked and done the following things: made sure it's plugged in all of the way, tried other usb ports, unplugged other usb devices, restarted itunes, reinstalled itunes, and restarted my computer but nothing has worked so far. I then, to see if it was the cable that was not working, plugged it into my dads windows 7 laptop. It was recognized by windows and itunes that first time but the second time I plugged it in neither windows or itunes recognized it and the ipod's orange light didnt come on.
Whats up with this? What should I try next? I feel like this may be an issue with the ipod itself but does anyone have any ideas of things I could try on my mbp to see if it will sync?When you say "hot beyond limits? do you mean that the iPod's screen showed the overheating warning?
Durring charging, the iPod can get quite warm. If you have a concern I would make an appoinment t the Genius Bar of an Apple store. How hot is hot is very subjective. -
ISE 1.2 Authentication Failures at First time Connection
Hi,
I have a trouble with ISE 1.2 when trying to authenticate for first time an end-device, this device might be either a Workstation or IP Phone or Printer,etc. it fails or staying in running mode. The result is the same it can not access the network. hopefully I'm still in open mode :)
As i described in the beginning everything has status Running or Authz Failed. and after a time of period usually one day finally succeeds.
This happens mostly for workstations and printers, but in case of phones does not have the same behavior. I unplug plug the phones or I shut/ no shut the ports in order to trigger it to succeed. For some phones worked but other obstinately declined.
The phones which are not Cisco phones authenticated with MD5 (a simple username and pass ) i think the problem should not related with the auth protocol.
Below are some logs from one phone. For me coming to a short conclusion this must be related with the switches which are 3750e (15.02 SE 4 IOS)
or with the same the ISE, why because i have almost the same behavior for all end-devices.
I kindly remain your comments...
2169669: Apr 16 18:02:20.573 EEST: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/35, changed state to up
2169670: Apr 16 18:02:20.783 EEST: %DOT1X-5-FAIL: Authentication failed for client (0080.9f7d.3ddf) on Interface Gi1/0/34 AuditSessionID 0A114D0D0000D5E8855C01DE
2169671: Apr 16 18:02:20.791 EEST: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (0080.9f7d.3ddf) on Interface Gi1/0/34 AuditSessionID 0A114D0D0000D5E8855C01DE
S301#
2169672: Apr 16 18:02:20.992 EEST: %AUTHMGR-5-START: Starting 'dot1x' for client (0080.9f7d.3ddf) on Interface Gi1/0/34 AuditSessionID 0A114D0D0000D5F0855DE0EF
2169673: Apr 16 18:02:21.580 EEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/35, changed state to up
S301#
2169674: Apr 16 18:02:24.289 EEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/35, changed state to down
S301#
2169675: Apr 16 18:02:25.288 EEST: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/35, changed state to down
2169676: Apr 16 18:02:26.269 EEST: %AUTHMGR-5-START: Starting 'dot1x' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169677: Apr 16 18:02:26.294 EEST: %DOT1X-5-FAIL: Authentication failed for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169678: Apr 16 18:02:26.294 EEST: %AUTHMGR-7-RESULT: Authentication result 'fail' from 'dot1x' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169679: Apr 16 18:02:26.303 EEST: %DOT1X-5-FAIL: Authentication failed for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169680: Apr 16 18:02:26.303 EEST: %AUTHMGR-7-RESULT: Authentication result 'fail' from 'dot1x' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169681: Apr 16 18:02:26.319 EEST: %DOT1X-5-FAIL: Authentication failed for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169682: Apr 16 18:02:26.319 EEST: %AUTHMGR-7-RESULT: Authentication result 'fail' from 'dot1x' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169683: Apr 16 18:02:26.319 EEST: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169684: Apr 16 18:02:26.319 EEST: %AUTHMGR-5-START: Starting 'mab' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169685: Apr 16 18:02:26.328 EEST: %MAB-5-FAIL: Authentication failed for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169686: Apr 16 18:02:26.328 EEST: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'mab' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169687: Apr 16 18:02:26.328 EEST: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
2169688: Apr 16 18:02:26.328 EEST: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
S301#
2169689: Apr 16 18:02:26.336 EEST: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (0080.9f7d.3e6f) on Interface Gi1/0/35 AuditSessionID 0A114D0D0000D5F1855DF3BE
S301#
2169690: Apr 16 18:02:27.737 EEST: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/35, changed state to up
2169691: Apr 16 18:02:28.744 EEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/35, changed state to up
Regards
T.CI'm not using authentication method with certificates for none end-devices
Workstations with the windows default authentication protocol EAP/MSCHAPv2
In front of them there are non Cisco IP-phones with auth. method EAP/MD5
Finally I also have some printers again with option EAP/MD5
For all of these devices I received the same behavior, after many hours finally the authenticated with ISE. But is this the expected behavior?
What I understand is that if the devices finally authenticated then it means that there isn’t anything wrong with the method.
The misunderstanding points are 3
Why there is so much delay for all devices to authenticate?
Why some devices, mostly IP phones (not all) continuing to fail to the authentication method. All my devices are identical with the same software / patch, same model etc.
I have noticed randomly some devices one moment to succeed and the next moment to failed
So for my understanding there is an abnormal behavior and i cannot find the way /pattern to correct it or to understand the reason :)
Port config
switchport access vlan xxx
switchport mode access
switchport voice vlan yyy
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan xxx
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
no cdp enable
spanning-tree portfast
result template
Switch#sh auth sess int g1/0/46
Interface: GigabitEthernet1/0/46
MAC Address: xxxx.xxxx.xxxx
IP Address: xx.xxx.xx.xxx
User-Name: xxxxxxxxxxxx
Status: Authz Failed
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-domain
Oper control dir: both
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A114D0A00001972016208E1
Acct Session ID: 0x00001BB7
Handle: 0x6D0009B6
Runnable methods list:
Method State
dot1x Failed over
mab Failed over -
I can't seem to get firefox properly running on my computer. I've installed it, I have internet connection, yet when I open a window and try to go on a site, it says 'unable to connect'
Hello Patrick O' D,
In my experience t here are two different problems with the speed of firefox on startup
# your os and setup
# firefox - and exactly what you use with it
Some factors will be down to your OS and for instance what does start up initially, many of those factors will affect other programmes/applications and not only firefox.
Some other factors depend on Firefox and how you set that up, I always like to have the option to using Firebug but realise it cold clash with other software or slow down firefox startup so I only enable it as I need it. see for instance: https://addons.mozilla.org/en-US/firefox/performance/ -
NH1005, only one device at a time connects to internet
I just switched my net to suddenlink cable (4mb/down, 512k/up) from a 756k clearwire broadband connection. I'm using the same network setup as before, all my machines set to auto-acquire IP and DNS addresses. Now though, I can only get on the internet with one device at a time, the other machines cannot find the DHCP server. I thought my NH1005 router had gone nuts, but that wasnt the case, went and got a new one at walmart and it does the same crap.. tried as well to access my router via 192.168.1.1, and even went in and tried using my gateway address to access my router.. both failed. I'm at a loss for what to do, especially seeing as how my old ISP just WORKED when i plugged it all in. Yes, i've reset my modem and all that stuff, many times, just at the end of my rope here. BTW my machines are a winXP laptop, and 2 playstation2's running Final Fantasy XI online.
hi..it seems that you have got a cable modem..and as NH1005 is a hub , only one computer can get connected at a time....
multiple computers can go online only if the hub is connected to a router... -
First time connecting to Itunes saying cannot be used required software not
Just acquired ITouch 8GB, when first turning on after charging only shows the Itunes picture and the cord, after downloading Itunes 7.7 and connecting Ipod error message, This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove them install Itunes again. I have tried everything I have seen online to correct this. I have removed the Itunes software and anything that has to do with it and reinstalled over 5 times and still nothing. I have no clue what to do. Help please!!! Also I am fairly computer illiterate
I finally had success!! I saw in another forum a post where the person had the same problem and removed QuickTime and then iTunes, restarted, and then re-installed iTunes. This person said it worked. So, I took it a step more and did this:
1-Uninstalled QuickTime
2-Uninstalled Apple Moble Device Manager
3-Uninstalled Apple Software Update Manager
4-Uninstalled iTunes
5-Restarted Computer
6-Installed iTunes
7-Restarted Computer
After that, all is well. You might not need to do all that, but that is what worked for me on my Windows 8 machine after the last iTunes update. -
First Time Connection of a Time Capsule
Hi, This is probably a really obvious question but what is the best way for me to set up my TC? I expected it to replace my Linksys router but from reading the forums this is not the case. Do i then need to connect via Ethernet to the router? If so, what does the TC offer over simply connecting a external HD to my router/PC? I was hoping to reduce the IT hardware around the house by having one box do everything, the TC, connected simply to the an ADSL filter into my telephone line.
Help really appreciated.Sam Waugh wrote:
first connection of a machine fails to find the TC: making the computer sleep and waking it and it then finds the TC immediately.
I'm not sure this will help, but since no one else had any suggestions for you, I'll offer it anyway. It might help to reset the connection settings on your Macs using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder. -
MIFI 4G - Having a hard time connecting to Internet
We have a home computer (desktop) and a laptop. We originally had MIFI 2200. Before we had the MIFI220 we had to make our home computer wireless which worked fine at first then after 2 years it became slow. We figured by getting the 4G it would be much quicker which it is for the laptop, but not for the home computer. Its now taking longer to connect to the Internet and once we do get a web page after a couple of minutes it just disconnect from Internet. Any advice would be appreciated.
Slowness is normally an issue best solved by resetting your MiFi. However, you mention that your laptop does not have slowness issues with the MiFi which leads me to think that the problem is more isolated to something on your desktop. Your desktop may have accumulated viruses and clutter over the years which have slowly deteriorated its performance. I suggest starting with a reload of your desktop from the CD's and starting fresh.
If you do not wish to go down that path then you can try some lowering your wireless mode to help with the disconnections:
Change the 802.11/Wireless Mode
Sign into your MiFi
Click the Wi-Fi tab
Change the 802.11 mode from B+G+N to B+G
Click Apply
Test your connection -
DAC Creating first time connection
Hi:
I'm trying to create the first connection between the DAC client (Windows) and DAC repository (Linux). The repository in on an 11g database, and I have ojdbc6.jar file in the \lib directory on the client machine. Still I receive the error:
MESSAGE:::Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
I can change the connection information to a 10g database and the connection test works fine. Thus I'm lead to believe that there's something different in the setup to connect to 11g.
From the Windows I can tnsping the 11g database and connect via sql*plus.
Any ideas or suggestions?
Thank you!Solved this problem. First, the ODBC connection I created was wrong. I missed the item in 4.7.4.1 How to Create ODBC Connections for Oracle Databases. The Server Name is the TNSNames entry for the database. Second, was are installing on a RAC database. Thus, when setting up the DAC connection I had to match the instance with the node name.
-
First time connection nokia6600 to pc suite
when i run pc suite on my pc, it says to connect phone to pc. i try and do this through bluetooth, but it says i'm disconnected. i'm running latest version of nokia 6600 pc suite on windows xp. i can send files to and from phone/ pc ok, in other software but not in this. any ideas? thanks
Reduce the amount of contacts. 2000 might be a little to much for the 5230.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
HELP! First time connecting to web host. How do I download my site files!!
Okay! My site is on my web host! I am a little lost since my web host gave me not totally clear directions on how to do this. I had sent him some of my pages including my home page he connected to their web server along with a dating software that was connected to the pages I sent. This is what he wrote after the comments in bold and so I am little lost.
Putting this here to show what I can access. >> Here is how you can access your control panel of the dating software: with my sign in and password info given
Putting this here to show what I can access. >> Here is how to access your control of the site itself on my web hosting server: with my sign in and password info given
IMPORTANT!!!!!
Be sure to download the entire site into your Dreamweaver and place a backup copy of it on an external hard drive or someplace else secure.
That's where I am lost, how do I download to DW? I previously loaded locally since I was working on my site on my lap top, so I know I have change those setting in DW. I can look thru my DW book. It's the download part I am a little confused about.
Thanks for responses to help me!Remote view, local view shows the files on your computer (thus the name local).
Just a tip, you can expand the files panel to full page by clicking on the expand icon on the far right hand side, (click on this again in expanded window to return to the main DW program).
PZ -
First-time connection to HSQLDB
I'm attempting a connection to HSQLDB, but have some questions about making the connection without an existing database.
In the connection URL, the last part is supposed to be a URL to a database, but nothing currently exists. Additionally, the username and password both do not exist yet because the database doesn't.
Must a database be created in advance of connecting to it? (I would guess no because then how would in-memory databases work?) If not, what should I enter in the username, password, and connection URL to make this work?
Thanks.And since I had to create this example for other purposes earlier on, you get it at no extra charge :-)
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.Statement;
public class SimpleHsqlDbExample {
public static void main(String[] args)
throws Exception
System.out.println("Preparing connection");
Class.forName(DRIVER);
Connection conn = DriverManager.getConnection(URL,USERNAME,PASSWORD);
Statement stat = conn.createStatement();
System.out.println("Issuing DDL");
stat.execute(CREATE_TABLE);
stat.close();
System.out.println("Creating content");
PreparedStatement ps = conn.prepareStatement(CREATE_CONTENT);
for(int i = 0; i < 100; i++) {
ps.setInt(1,i);
ps.setString(2,"Example content: " + i);
ps.executeUpdate();
ps.close();
System.out.println("Acquiring the data");
ps = conn.prepareStatement(SELECT_CONTENT);
ps.setInt(1,42);
ResultSet rs = ps.executeQuery();
while(rs.next()) {
System.out.println("Retrieved data (" + rs.getString(1) + ")");
conn.close();
System.out.println("Done.");
private static final String URL = "jdbc:hsqldb:file:sprocdb;SHUTDOWN=true";
private static final String DRIVER = "org.hsqldb.jdbcDriver";
private static final String USERNAME = "sa";
private static final String PASSWORD = "";
private static final String CREATE_TABLE = "CREATE TABLE example (id integer primary key, content varchar(32) not null)";
private static final String CREATE_CONTENT = "INSERT INTO example(id,content) VALUES (?,?)";
private static final String SELECT_CONTENT = "SELECT content FROM example WHERE id = ?";
}
Maybe you are looking for
-
Is there a way to make emails within emails?
I was trying to use Adobe Dreamweaver and watch tutorials on how to do it, but so far I have not been able to find anything that would help me do it. I think this has either never been done before or it is so rare that tutorials haven't been made yet
-
Mozilla firefox is crashing my computer. It will run and the blue screen would come on because of this I cannot run firefox on my computer anymore. What to do? == This happened == Every time Firefox opened == June 2010 == == User Agent == Mozilla/4.0
-
Expanded Profit Center Hierarhcy display in Report Painter.
Hello, We have built a report painter based P&L report with variation on company code and profit center. The profit center hierarchy has multiple levels. User requirement is - The report output should show the profit center hierarchy fully expand
-
How to add dynamically a watermark to drm secured file pdf/epub?
Hi, I have found this site http://www.ebook-converter.com/digital-editions-converter.htm and it really works!, so i have question: how to prevent user from doing that? Is there any way to prevent users from snapshotting whole books? Maybe adding user
-
[Debugging] - how to avoi intensive CPU usage with debug command
Hi all ! I hope you're well ! I'm just wondering if there is a mean to avoid the increase of CPU usage when using the debug command. More precisely I would like to know if it exists something to avoid the CPU to saturate and to allow vital process to